target/linux/ramips/dts/DIR-300-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-300-B1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-300 B1";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27
  28         };
  29
  30         cfi@1f000000 {
  31                 compatible = "cfi-flash";
  32                 reg = <0x1f000000 0x800000>;
  33
  34                 bank-width = <2>;
  35                 device-width = <2>;
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38         };
  39
  40         ethernet@10100000 {
  41                 status = "okay";
  42         };
  43
  44         esw@10110000 {
  45                 status = "okay";
  46                 ralink,portmap = <0x2f>;
  47         };
  48
  49         gpio-keys-polled {
  50                 compatible = "gpio-keys-polled";
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53                 poll-interval = <20>;
  54                 reset {
  55                         label = "reset";
  56                         gpios = <&gpio0 10 1>;
  57                         linux,code = <0x198>;
  58                 };
  59                 wps {
  60                         label = "wps";
  61                         gpios = <&gpio0 0 1>;
  62                         linux,code = <0x211>;
  63                 };
  64         };
  65
  66         wmac@10180000 {
  67                 status = "okay";
  68         };
  69
  70         gpio-leds {
  71                 compatible = "gpio-leds";
  72                 status {
  73                         label = "d-link:amber:status";
  74                         gpios = <&gpio0 8 1>;
  75                 };
  76                 status2 {
  77                         label = "d-link:green:status";
  78                         gpios = <&gpio0 9 1>;
  79                 };
  80                 wan {
  81                         label = "d-link:amber:wan";
  82                         gpios = <&gpio0 14 1>;
  83                 };
  84                 wan2 {
  85                         label = "d-link:green:wan";
  86                         gpios = <&gpio0 12 1>;
  87                 };
  88                 wps {
  89                         label = "d-link:blue:wps";
  90                         gpios = <&gpio0 13 1>;
  91                 };
  92         };
  93 };