target/linux/ramips/dts/MZK-EX300NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex MZK-EX300NP";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 wifi {
  15                         label = "mzk-ex300np:green:wifi";
  16                         gpios = <&gpio3 0 1>;
  17                 };
  18
  19                 wps {
  20                         label = "mzk-ex300np:green:wps";
  21                         gpios = <&gpio1 5 1>;
  22                 };
  23
  24                 rep {
  25                         label = "mzk-ex300np:blue:rep";
  26                         gpios = <&gpio1 4 1>;
  27                 };
  28
  29                 wifi1 {
  30                         label = "mzk-ex300np:blue:wifi1";
  31                         gpios = <&gpio1 1 1>;
  32                 };
  33
  34                 wifi2 {
  35                         label = "mzk-ex300np:blue:wifi2";
  36                         gpios = <&gpio1 2 1>;
  37                 };
  38
  39                 wifi3 {
  40                         label = "mzk-ex300np:blue:wifi3";
  41                         gpios = <&gpio1 0 1>;
  42                 };
  43         };
  44
  45         gpio-keys-polled {
  46                 compatible = "gpio-keys-polled";
  47                 #address-cells = <1>;
  48                 #size-cells = <0>;
  49                 poll-interval = <20>;
  50
  51                 reset {
  52                         label = "reset";
  53                         gpios = <&gpio0 1 1>;
  54                         linux,code = <KEY_RESTART>;
  55                 };
  56
  57                 wps {
  58                         label = "wps";
  59                         gpios = <&gpio1 3 0>;
  60                         linux,code = <KEY_RFKILL>;
  61                 };
  62         };
  63 };
  64
  65 &gpio1 {
  66         status = "okay";
  67 };
  68
  69 &gpio3 {
  70         status = "okay";
  71 };
  72
  73 &spi0 {
  74         status = "okay";
  75
  76         m25p80@0 {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 linux,modalias = "m25p80", "w25q64";
  82                 spi-max-frequency = <10000000>;
  83
  84                 partition@0 {
  85                         label = "u-boot";
  86                         reg = <0x0 0x30000>;
  87                         read-only;
  88                 };
  89
  90                 partition@30000 {
  91                         label = "u-boot-env";
  92                         reg = <0x30000 0x10000>;
  93                         read-only;
  94                 };
  95
  96                 factory: partition@40000 {
  97                         label = "factory";
  98                         reg = <0x40000 0x10000>;
  99                         read-only;
 100                 };
 101
 102                 partition@50000 {
 103                         label = "firmware";
 104                         reg = <0x50000 0x730000>;
 105                 };
 106
 107                 partition@780000 {
 108                         label = "Udata";
 109                         reg = <0x780000 0x80000>;
 110                 };
 111         };
 112 };
 113
 114 &pinctrl {
 115         state_default: pinctrl0 {
 116                 gpio {
 117                         ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
 118                         ralink,function = "gpio";
 119                 };
 120         };
 121 };
 122
 123 &ethernet {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&ephy_pins>;
 126         mtd-mac-address = <&factory 0x4>;
 127         mediatek,portmap = "llllw";
 128 };
 129
 130 &wmac {
 131         ralink,mtd-eeprom = <&factory 0>;
 132 };