target/linux/ramips/dts/WF-2881.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   9         model = "NETIS WF-2881";
  10
  11         memory@0 {
  12                 device_type = "memory";
  13                 reg = <0x0 0x8000000>;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,57600";
  18         };
  19
  20         nand@1e003000 {
  21                 status = "okay";
  22
  23                 partition@0 {
  24                         label = "u-boot";
  25                         reg = <0x0 0x30000>;
  26                         read-only;
  27                 };
  28
  29                 partition@30000 {
  30                         label = "u-boot-env";
  31                         reg = <0x30000 0x1000>;
  32                         read-only;
  33                 };
  34
  35                 partition@80000 {
  36                         label = "config";
  37                         reg = <0x80000 0x80000>;
  38                         read-only;
  39                 };
  40
  41                 factory: partition@100000 {
  42                         label = "factory";
  43                         reg = <0x100000 0x40000>;
  44                         read-only;
  45                 };
  46
  47                 partition@140000 {
  48                         label = "firmware";
  49                         reg = <0x140000 0x7E40000>;
  50                 };
  51         };
  52
  53         gpio-leds {
  54                 compatible = "gpio-leds";
  55
  56                 usb {
  57                         label = "wf-2881:green:usb";
  58                         gpios = <&gpio0 6 1>;
  59                 };
  60
  61                 wps {
  62                         label = "wf-2881:green:wps";
  63                         gpios = <&gpio0 0 1>;
  64                 };
  65         };
  66
  67         gpio-keys-polled {
  68                 compatible = "gpio-keys-polled";
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71                 poll-interval = <20>;
  72
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&gpio0 12 1>;
  76                         linux,code = <KEY_RESTART>;
  77                 };
  78         };
  79 };
  80
  81 &spi0 {
  82         status="disabled";
  83 };
  84
  85 &pcie {
  86         status = "okay";
  87
  88         pcie0 {
  89                 mt76@0,0 {
  90                         reg = <0x0000 0 0 0 0>;
  91                         device_type = "pci";
  92                         mediatek,mtd-eeprom = <&factory 0x8000>;
  93                         mediatek,2ghz = <0>;
  94                 };
  95         };
  96
  97         pcie1 {
  98                 mt76@1,0 {
  99                         reg = <0x0000 0 0 0 0>;
 100                         device_type = "pci";
 101                         mediatek,mtd-eeprom = <&factory 0x0000>;
 102                         mediatek,5ghz = <0>;
 103                 };
 104         };
 105 };
 106
 107 &ethernet {
 108         mtd-mac-address = <&factory 0xe006>;
 109 };
 110
 111 &pinctrl {
 112         state_default: pinctrl0 {
 113                 gpio {
 114                         ralink,group = "uart3", "jtag";
 115                         ralink,function = "gpio";
 116                 };
 117         };
 118 };