+ Your LEDE Community
+ http://www.lede-project.org
+
+================================================================================
+
+This LEDE lede-17.01 branch was taken in July 2017 from the LEDE github
+repository for Vigilia system. A few things have been added including a patch
+for hostapd to make disable_dgaf and proxy_arp options work properly.
+
+The followings are the steps to be done to install this correctly on a NETGEAR R7800
+Nighthawk X4S router:
+
+1) Do "git clone ssh://plrg.eecs.uci.edu/home/git/lede" to download this LEDE
+onto your local repository. Then execute "git checkout lede-17.01" to checkout
+the right branch---this is a detached branch (there is no master branch), so we
+have to do this to make sure that we can push and pull changes correctly.
+
+2) Run "./scripts/feeds update -a" to get all the latest package definitions
+defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds
+install -a" to install symlinks of all of them into package/feeds/.
+Run "make menuconfig", choose "< Load >", and load "vigilia.config". Then save
+this configuration as ".config".
+
+3) Do "make world -j<number-of-proc>", e.g. make world -j12.
+
+4) After the compilation, the image will be found in
+bin/targets/ipq806x/generic/lede-ipq806x-R7800-squashfs-factory.img. We can flash
+this image onto the Netgear R7800 Nighthawk X4S router using the instructions here:
+https://lede-project.org/docs/guide-quick-start/standardflashinginstructions.
+
+5) After flashing and booting for the first time, we need to set up the router using
+RJ45 cables; if we plug it into the WAN connection through DHCP mechanism, we can get
+an IP address for that WAN port instantly; to set up network configurations, we can
+access the router by connecting a device to the router, opening a browser, and typing
+the default router IP address: http://192.168.1.1; this will open the lUCI configuration
+page and we can set up the router now.
+
+6) We can set up first the LAN connection according to the LAN configuration
+in vigilia/config/network.
+
+7) Then we can set up a password for the system by typing "passwd" and giving it
+a new password.
+
+8) Reboot the system and we can login using dropbear ssh authentication by typing
+"ssh root@128.195.204.94" and inputting the password. If we want to use SSL key
+for the sake of convenience, then we have to do the steps here:
+https://wiki.openwrt.org/doc/howto/dropbear.public-key.auth
+Basically we copy our machine's public-key to the LEDE system by typing:
+ssh root@128.195.204.94 "tee -a /etc/dropbear/authorized_keys" < ~/.ssh/id_rsa.pub
+
+9) We need to copy the setup in dhcp, network, wireless, and hostapd-psk files in
+vigilia_setup/config/ into the same files in /etc/config/ on the LEDE system.
+Also we need to copy vigilia_setup/rc.local that contains the initial setup scripts
+into /etc on the LEDE system. For the firewall file, since we do not use the
+default firewall setup from LEDE, we can do
+"mv /etc/config/firewall /etc/config/firewall.bak" to make it unreadable by LEDE
+UCI when it is initializing the firewall rules when the system is booting up.
+
+10) We need to also create /root/vigilia_setup/register and copy the scripts and files in
+vigilia_setup/register/version_3 into it. These Shell scripts work with the
+Android app that registers and deletes devices to and from the router.
projects / lede.git / blobdiff