mfd: Add driver for Atmel Microcontroller on iPaq h3xxx

[firefly-linux-kernel-4.4.55.git] / drivers / mfd / Kconfig

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 33834120d057117f5b98284227ee0e3ec59df371..60cef41b0af49889c5f1d20312e9640c37d60854 100644 (file)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -67,6 +67,18 @@ config MFD_BCM590XX
        help
          Support for the BCM590xx PMUs from Broadcom
 
        help
          Support for the BCM590xx PMUs from Broadcom
 

+config MFD_AXP20X
+       bool "X-Powers AXP20X"
+       select MFD_CORE
+       select REGMAP_I2C
+       select REGMAP_IRQ
+       depends on I2C=y
+       help
+         If you say Y here you get support for the X-Powers AXP202 and AXP209.
+         This driver include only the core APIs. You have to select individual
+         components like regulators or the PEK (Power Enable Key) under the
+         corresponding menus.
+

 config MFD_CROS_EC
        tristate "ChromeOS Embedded Controller"
        select MFD_CORE
 config MFD_CROS_EC
        tristate "ChromeOS Embedded Controller"
        select MFD_CORE


@@ -250,6 +262,16 @@ config MFD_INTEL_MSIC
          Passage) chip. This chip embeds audio, battery, GPIO, etc.
          devices used in Intel Medfield platforms.
 
          Passage) chip. This chip embeds audio, battery, GPIO, etc.
          devices used in Intel Medfield platforms.
 

+config MFD_IPAQ_MICRO
+       bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
+       depends on SA1100_H3100 || SA1100_H3600
+       select MFD_CORE
+       help
+         Select this to get support for the Microcontroller found in
+         the Compaq iPAQ handheld computers. This is an Atmel
+         AT90LS8535 microcontroller flashed with a special iPAQ
+         firmware using the custom protocol implemented in this driver.
+

 config MFD_JANZ_CMODIO
        tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
        select MFD_CORE
 config MFD_JANZ_CMODIO
        tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
        select MFD_CORE


@@ -331,15 +353,15 @@ config MFD_88PM860X
          battery-charger under the corresponding menus.
 
 config MFD_MAX14577
          battery-charger under the corresponding menus.
 
 config MFD_MAX14577

-       bool "Maxim Semiconductor MAX14577 MUIC + Charger Support"
+       bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"

        depends on I2C=y
        select MFD_CORE
        select REGMAP_I2C
        select REGMAP_IRQ
        select IRQ_DOMAIN
        help
        depends on I2C=y
        select MFD_CORE
        select REGMAP_I2C
        select REGMAP_IRQ
        select IRQ_DOMAIN
        help

-         Say yes here to add support for Maxim Semiconductor MAX14577.
-         This is a Micro-USB IC with Charger controls on chip.
+         Say yes here to add support for Maxim Semiconductor MAX14577 and
+         MAX77836 Micro-USB ICs with battery charger.

          This driver provides common support for accessing the device;
          additional drivers must be enabled in order to use the functionality
          of the device.
          This driver provides common support for accessing the device;
          additional drivers must be enabled in order to use the functionality
          of the device.


@@ -675,6 +697,7 @@ config MFD_DB8500_PRCMU
 config MFD_STMPE
        bool "STMicroelectronics STMPE"
        depends on (I2C=y || SPI_MASTER=y)
 config MFD_STMPE
        bool "STMicroelectronics STMPE"
        depends on (I2C=y || SPI_MASTER=y)

+       depends on OF

        select MFD_CORE
        help
          Support for the STMPE family of I/O Expanders from
        select MFD_CORE
        help
          Support for the STMPE family of I/O Expanders from


@@ -719,6 +742,14 @@ config MFD_STA2X11
        select MFD_CORE
        select REGMAP_MMIO
 
        select MFD_CORE
        select REGMAP_MMIO
 

+config MFD_SUN6I_PRCM
+       bool "Allwinner A31 PRCM controller"
+       depends on ARCH_SUNXI
+       select MFD_CORE
+       help
+         Support for the PRCM (Power/Reset/Clock Management) unit available
+         in A31 SoC.
+

 config MFD_SYSCON
        bool "System Controller Register R/W Based on Regmap"
        select REGMAP_MMIO
 config MFD_SYSCON
        bool "System Controller Register R/W Based on Regmap"
        select REGMAP_MMIO