-/**
- * dwc2_qh_init() - Initializes a QH structure
- *
- * @hsotg: The HCD state structure for the DWC OTG controller
- * @qh: The QH to init
- * @urb: Holds the information about the device/endpoint needed to initialize
- * the QH
- */
-#define SCHEDULE_SLOP 10
-static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
- struct dwc2_hcd_urb *urb)
-{
- int dev_speed, hub_addr, hub_port;
- char *speed, *type;
-
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- /* Initialize QH */
- qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
- qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
-
- qh->data_toggle = DWC2_HC_PID_DATA0;
- qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info);
- INIT_LIST_HEAD(&qh->qtd_list);
- INIT_LIST_HEAD(&qh->qh_list_entry);
-
- /* FS/LS Endpoint on HS Hub, NOT virtual root hub */
- dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
-
- dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
-
- if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
- hub_addr != 0 && hub_addr != 1) {
- dev_vdbg(hsotg->dev,
- "QH init: EP %d: TT found at hub addr %d, for port %d\n",
- dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr,
- hub_port);
- qh->do_split = 1;
- }
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
- qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /* Compute scheduling parameters once and save them */
- u32 hprt, prtspd;
-
- /* Todo: Account for split transfers in the bus time */
- int bytecount =
- dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
-
- qh->usecs = NS_TO_US(usb_calc_bus_time(qh->do_split ?
- USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
- qh->ep_type == USB_ENDPOINT_XFER_ISOC,
- bytecount));
-
- /* Ensure frame_number corresponds to the reality */
- hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
- /* Start in a slightly future (micro)frame */
- qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number,
- SCHEDULE_SLOP);
- qh->interval = urb->interval;
-#if 0
- /* Increase interrupt polling rate for debugging */
- if (qh->ep_type == USB_ENDPOINT_XFER_INT)
- qh->interval = 8;
-#endif
- hprt = dwc2_readl(hsotg->regs + HPRT0);
- prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- if (prtspd == HPRT0_SPD_HIGH_SPEED &&
- (dev_speed == USB_SPEED_LOW ||
- dev_speed == USB_SPEED_FULL)) {
- qh->interval *= 8;
- qh->sched_frame |= 0x7;
- qh->start_split_frame = qh->sched_frame;
- }
- dev_dbg(hsotg->dev, "interval=%d\n", qh->interval);
- }
-
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n");
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh);
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n",
- dwc2_hcd_get_dev_addr(&urb->pipe_info));
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n",
- dwc2_hcd_get_ep_num(&urb->pipe_info),
- dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
-
- qh->dev_speed = dev_speed;
-
- switch (dev_speed) {
- case USB_SPEED_LOW:
- speed = "low";
- break;
- case USB_SPEED_FULL:
- speed = "full";
- break;
- case USB_SPEED_HIGH:
- speed = "high";
- break;
- default:
- speed = "?";
- break;
- }
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed);
-
- switch (qh->ep_type) {
- case USB_ENDPOINT_XFER_ISOC:
- type = "isochronous";
- break;
- case USB_ENDPOINT_XFER_INT:
- type = "interrupt";
- break;
- case USB_ENDPOINT_XFER_CONTROL:
- type = "control";
- break;
- case USB_ENDPOINT_XFER_BULK:
- type = "bulk";
- break;
- default:
- type = "?";
- break;
- }
-
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type);
-
- if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n",
- qh->usecs);
- dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n",
- qh->interval);
- }
-}
-
-/**
- * dwc2_hcd_qh_create() - Allocates and initializes a QH
- *
- * @hsotg: The HCD state structure for the DWC OTG controller
- * @urb: Holds the information about the device/endpoint needed
- * to initialize the QH
- * @atomic_alloc: Flag to do atomic allocation if needed
- *
- * Return: Pointer to the newly allocated QH, or NULL on error
- */
-struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
- struct dwc2_hcd_urb *urb,
- gfp_t mem_flags)
-{
- struct dwc2_qh *qh;
-
- if (!urb->priv)
- return NULL;
-
- /* Allocate memory */
- qh = kzalloc(sizeof(*qh), mem_flags);
- if (!qh)
- return NULL;
-
- dwc2_qh_init(hsotg, qh, urb);
-
- if (hsotg->core_params->dma_desc_enable > 0 &&
- dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
- dwc2_hcd_qh_free(hsotg, qh);
- return NULL;
- }
-
- return qh;
-}
-
-/**
- * dwc2_hcd_qh_free() - Frees the QH
- *
- * @hsotg: HCD instance
- * @qh: The QH to free
- *
- * QH should already be removed from the list. QTD list should already be empty
- * if called from URB Dequeue.
- *
- * Must NOT be called with interrupt disabled or spinlock held
- */
-void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
-{
- if (hsotg->core_params->dma_desc_enable > 0) {
- dwc2_hcd_qh_free_ddma(hsotg, qh);
- } else {
- /* kfree(NULL) is safe */
- kfree(qh->dw_align_buf);
- qh->dw_align_buf_dma = (dma_addr_t)0;
- }
- kfree(qh);
-}