+class MCExpr;
+class MCSection;
+class MCStreamer;
+class MCSymbol;
+class MCContext;
+
+namespace WinEH {
+enum class EncodingType {
+ Invalid, /// Invalid
+ Alpha, /// Windows Alpha
+ Alpha64, /// Windows AXP64
+ ARM, /// Windows NT (Windows on ARM)
+ CE, /// Windows CE ARM, PowerPC, SH3, SH4
+ Itanium, /// Windows x64, Windows Itanium (IA-64)
+ MIPS = Alpha,
+};
+}
+
+enum class ExceptionHandling {
+ None, /// No exception support
+ DwarfCFI, /// DWARF-like instruction based exceptions
+ SjLj, /// setjmp/longjmp based exceptions
+ ARM, /// ARM EHABI
+ ItaniumWinEH, /// Itanium EH built on Windows unwind info (.pdata and .xdata)
+};
+
+namespace LCOMM {
+enum LCOMMType { NoAlignment, ByteAlignment, Log2Alignment };
+}
+
+/// This class is intended to be used as a base class for asm
+/// properties and features specific to the target.
+class MCAsmInfo {
+protected:
+ //===------------------------------------------------------------------===//
+ // Properties to be set by the target writer, used to configure asm printer.
+ //
+
+ /// Pointer size in bytes. Default is 4.
+ unsigned PointerSize;
+
+ /// Size of the stack slot reserved for callee-saved registers, in bytes.
+ /// Default is same as pointer size.
+ unsigned CalleeSaveStackSlotSize;
+
+ /// True if target is little endian. Default is true.
+ bool IsLittleEndian;
+
+ /// True if target stack grow up. Default is false.
+ bool StackGrowsUp;
+
+ /// True if this target has the MachO .subsections_via_symbols directive.
+ /// Default is false.
+ bool HasSubsectionsViaSymbols;
+
+ /// True if this is a MachO target that supports the macho-specific .zerofill
+ /// directive for emitting BSS Symbols. Default is false.
+ bool HasMachoZeroFillDirective;
+
+ /// True if this is a MachO target that supports the macho-specific .tbss
+ /// directive for emitting thread local BSS Symbols. Default is false.
+ bool HasMachoTBSSDirective;
+
+ /// True if the compiler should emit a ".reference .constructors_used" or
+ /// ".reference .destructors_used" directive after the static ctor/dtor
+ /// list. This directive is only emitted in Static relocation model. Default
+ /// is false.
+ bool HasStaticCtorDtorReferenceInStaticMode;
+
+ /// This is the maximum possible length of an instruction, which is needed to
+ /// compute the size of an inline asm. Defaults to 4.
+ unsigned MaxInstLength;
+
+ /// Every possible instruction length is a multiple of this value. Factored
+ /// out in .debug_frame and .debug_line. Defaults to 1.
+ unsigned MinInstAlignment;
+
+ /// The '$' token, when not referencing an identifier or constant, refers to
+ /// the current PC. Defaults to false.
+ bool DollarIsPC;
+
+ /// This string, if specified, is used to separate instructions from each
+ /// other when on the same line. Defaults to ';'
+ const char *SeparatorString;
+
+ /// This indicates the comment character used by the assembler. Defaults to
+ /// "#"
+ const char *CommentString;
+
+ /// This is appended to emitted labels. Defaults to ":"
+ const char *LabelSuffix;
+
+ // Print the EH begin symbol with an assignment. Defaults to false.
+ bool UseAssignmentForEHBegin;
+
+ /// This prefix is used for globals like constant pool entries that are
+ /// completely private to the .s file and should not have names in the .o
+ /// file. Defaults to "L"
+ const char *PrivateGlobalPrefix;
+
+ /// This prefix is used for symbols that should be passed through the
+ /// assembler but be removed by the linker. This is 'l' on Darwin, currently
+ /// used for some ObjC metadata. The default of "" meast that for this system
+ /// a plain private symbol should be used. Defaults to "".
+ const char *LinkerPrivateGlobalPrefix;
+
+ /// If these are nonempty, they contain a directive to emit before and after
+ /// an inline assembly statement. Defaults to "#APP\n", "#NO_APP\n"
+ const char *InlineAsmStart;
+ const char *InlineAsmEnd;
+
+ /// These are assembly directives that tells the assembler to interpret the
+ /// following instructions differently. Defaults to ".code16", ".code32",
+ /// ".code64".
+ const char *Code16Directive;
+ const char *Code32Directive;
+ const char *Code64Directive;
+
+ /// Which dialect of an assembler variant to use. Defaults to 0
+ unsigned AssemblerDialect;
+
+ /// This is true if the assembler allows @ characters in symbol names.
+ /// Defaults to false.
+ bool AllowAtInName;
+
+ /// This is true if data region markers should be printed as
+ /// ".data_region/.end_data_region" directives. If false, use "$d/$a" labels
+ /// instead.
+ bool UseDataRegionDirectives;
+
+ //===--- Data Emission Directives -------------------------------------===//
+
+ /// This should be set to the directive used to get some number of zero bytes
+ /// emitted to the current section. Common cases are "\t.zero\t" and
+ /// "\t.space\t". If this is set to null, the Data*bitsDirective's will be
+ /// used to emit zero bytes. Defaults to "\t.zero\t"
+ const char *ZeroDirective;
+
+ /// This directive allows emission of an ascii string with the standard C
+ /// escape characters embedded into it. Defaults to "\t.ascii\t"
+ const char *AsciiDirective;
+
+ /// If not null, this allows for special handling of zero terminated strings
+ /// on this target. This is commonly supported as ".asciz". If a target
+ /// doesn't support this, it can be set to null. Defaults to "\t.asciz\t"
+ const char *AscizDirective;
+
+ /// These directives are used to output some unit of integer data to the
+ /// current section. If a data directive is set to null, smaller data
+ /// directives will be used to emit the large sizes. Defaults to "\t.byte\t",
+ /// "\t.short\t", "\t.long\t", "\t.quad\t"
+ const char *Data8bitsDirective;
+ const char *Data16bitsDirective;
+ const char *Data32bitsDirective;
+ const char *Data64bitsDirective;
+
+ /// If non-null, a directive that is used to emit a word which should be
+ /// relocated as a 64-bit GP-relative offset, e.g. .gpdword on Mips. Defaults
+ /// to NULL.
+ const char *GPRel64Directive;
+
+ /// If non-null, a directive that is used to emit a word which should be
+ /// relocated as a 32-bit GP-relative offset, e.g. .gpword on Mips or .gprel32
+ /// on Alpha. Defaults to NULL.
+ const char *GPRel32Directive;
+
+ /// This is true if this target uses "Sun Style" syntax for section switching
+ /// ("#alloc,#write" etc) instead of the normal ELF syntax (,"a,w") in
+ /// .section directives. Defaults to false.
+ bool SunStyleELFSectionSwitchSyntax;
+
+ /// This is true if this target uses ELF '.section' directive before the
+ /// '.bss' one. It's used for PPC/Linux which doesn't support the '.bss'
+ /// directive only. Defaults to false.
+ bool UsesELFSectionDirectiveForBSS;
+
+ bool NeedsDwarfSectionOffsetDirective;
+
+ //===--- Alignment Information ----------------------------------------===//
+
+ /// If this is true (the default) then the asmprinter emits ".align N"
+ /// directives, where N is the number of bytes to align to. Otherwise, it
+ /// emits ".align log2(N)", e.g. 3 to align to an 8 byte boundary. Defaults
+ /// to true.
+ bool AlignmentIsInBytes;
+
+ /// If non-zero, this is used to fill the executable space created as the
+ /// result of a alignment directive. Defaults to 0
+ unsigned TextAlignFillValue;
+
+ //===--- Global Variable Emission Directives --------------------------===//
+
+ /// This is the directive used to declare a global entity. Defaults to NULL.
+ const char *GlobalDirective;
+
+ /// True if the expression
+ /// .long f - g
+ /// uses an relocation but it can be supressed by writting
+ /// a = f - g
+ /// .long a
+ bool SetDirectiveSuppressesReloc;
+
+ /// False if the assembler requires that we use
+ /// \code
+ /// Lc = a - b
+ /// .long Lc
+ /// \endcode
+ //
+ /// instead of
+ //
+ /// \code
+ /// .long a - b
+ /// \endcode
+ ///
+ /// Defaults to true.
+ bool HasAggressiveSymbolFolding;
+
+ /// True is .comm's and .lcomms optional alignment is to be specified in bytes
+ /// instead of log2(n). Defaults to true.
+ bool COMMDirectiveAlignmentIsInBytes;
+
+ /// Describes if the .lcomm directive for the target supports an alignment
+ /// argument and how it is interpreted. Defaults to NoAlignment.
+ LCOMM::LCOMMType LCOMMDirectiveAlignmentType;
+
+ /// True if the target has .type and .size directives, this is true for most
+ /// ELF targets. Defaults to true.
+ bool HasDotTypeDotSizeDirective;
+
+ /// True if the target has a single parameter .file directive, this is true
+ /// for ELF targets. Defaults to true.
+ bool HasSingleParameterDotFile;
+
+ /// True if the target has a .ident directive, this is true for ELF targets.
+ /// Defaults to false.
+ bool HasIdentDirective;
+
+ /// True if this target supports the MachO .no_dead_strip directive. Defaults
+ /// to false.
+ bool HasNoDeadStrip;
+
+ /// This directive, if non-null, is used to declare a global as being a weak
+ /// undefined symbol. Defaults to NULL.
+ const char *WeakRefDirective;
+
+ /// True if we have a directive to declare a global as being a weak defined
+ /// symbol. Defaults to false.
+ bool HasWeakDefDirective;
+
+ /// True if we have a directive to declare a global as being a weak defined
+ /// symbol that can be hidden (unexported). Defaults to false.
+ bool HasWeakDefCanBeHiddenDirective;
+
+ /// True if we have a .linkonce directive. This is used on cygwin/mingw.
+ /// Defaults to false.
+ bool HasLinkOnceDirective;
+
+ /// This attribute, if not MCSA_Invalid, is used to declare a symbol as having
+ /// hidden visibility. Defaults to MCSA_Hidden.
+ MCSymbolAttr HiddenVisibilityAttr;
+
+ /// This attribute, if not MCSA_Invalid, is used to declare an undefined
+ /// symbol as having hidden visibility. Defaults to MCSA_Hidden.
+ MCSymbolAttr HiddenDeclarationVisibilityAttr;
+
+ /// This attribute, if not MCSA_Invalid, is used to declare a symbol as having
+ /// protected visibility. Defaults to MCSA_Protected
+ MCSymbolAttr ProtectedVisibilityAttr;
+
+ //===--- Dwarf Emission Directives -----------------------------------===//
+
+ /// True if target supports emission of debugging information. Defaults to
+ /// false.
+ bool SupportsDebugInformation;
+
+ /// Exception handling format for the target. Defaults to None.
+ ExceptionHandling ExceptionsType;