+#ifndef NDEBUG
+static raw_ostream &operator<<(raw_ostream &OS,
+ const InlineSpiller::SibValueInfo &SVI) {
+ OS << "spill " << PrintReg(SVI.SpillReg) << ':'
+ << SVI.SpillVNI->id << '@' << SVI.SpillVNI->def;
+ if (SVI.SpillMBB)
+ OS << " in BB#" << SVI.SpillMBB->getNumber();
+ if (SVI.AllDefsAreReloads)
+ OS << " all-reloads";
+ if (SVI.DefByOrigPHI)
+ OS << " orig-phi";
+ if (SVI.KillsSource)
+ OS << " kill";
+ OS << " deps[";
+ for (unsigned i = 0, e = SVI.Deps.size(); i != e; ++i)
+ OS << ' ' << SVI.Deps[i]->id << '@' << SVI.Deps[i]->def;
+ OS << " ]";
+ if (SVI.DefMI)
+ OS << " def: " << *SVI.DefMI;
+ else
+ OS << '\n';
+ return OS;
+}
+#endif
+
+/// propagateSiblingValue - Propagate the value in SVI to dependents if it is
+/// known. Otherwise remember the dependency for later.
+///
+/// @param SVI SibValues entry to propagate.
+/// @param VNI Dependent value, or NULL to propagate to all saved dependents.
+void InlineSpiller::propagateSiblingValue(SibValueMap::iterator SVI,
+ VNInfo *VNI) {
+ // When VNI is non-NULL, add it to SVI's deps, and only propagate to that.
+ TinyPtrVector<VNInfo*> FirstDeps;
+ if (VNI) {
+ FirstDeps.push_back(VNI);
+ SVI->second.Deps.push_back(VNI);
+ }
+
+ // Has the value been completely determined yet? If not, defer propagation.
+ if (!SVI->second.hasDef())
+ return;
+
+ // Work list of values to propagate. It would be nice to use a SetVector
+ // here, but then we would be forced to use a SmallSet.
+ SmallVector<SibValueMap::iterator, 8> WorkList(1, SVI);
+ SmallPtrSet<VNInfo*, 8> WorkSet;
+
+ do {
+ SVI = WorkList.pop_back_val();
+ WorkSet.erase(SVI->first);
+ TinyPtrVector<VNInfo*> *Deps = VNI ? &FirstDeps : &SVI->second.Deps;
+ VNI = 0;
+
+ SibValueInfo &SV = SVI->second;
+ if (!SV.SpillMBB)
+ SV.SpillMBB = LIS.getMBBFromIndex(SV.SpillVNI->def);
+
+ DEBUG(dbgs() << " prop to " << Deps->size() << ": "
+ << SVI->first->id << '@' << SVI->first->def << ":\t" << SV);
+
+ assert(SV.hasDef() && "Propagating undefined value");
+
+ // Should this value be propagated as a preferred spill candidate? We don't
+ // propagate values of registers that are about to spill.
+ bool PropSpill = !DisableHoisting && !isRegToSpill(SV.SpillReg);
+ unsigned SpillDepth = ~0u;
+
+ for (TinyPtrVector<VNInfo*>::iterator DepI = Deps->begin(),
+ DepE = Deps->end(); DepI != DepE; ++DepI) {
+ SibValueMap::iterator DepSVI = SibValues.find(*DepI);
+ assert(DepSVI != SibValues.end() && "Dependent value not in SibValues");
+ SibValueInfo &DepSV = DepSVI->second;
+ if (!DepSV.SpillMBB)
+ DepSV.SpillMBB = LIS.getMBBFromIndex(DepSV.SpillVNI->def);
+
+ bool Changed = false;
+
+ // Propagate defining instruction.
+ if (!DepSV.hasDef()) {
+ Changed = true;
+ DepSV.DefMI = SV.DefMI;
+ DepSV.DefByOrigPHI = SV.DefByOrigPHI;
+ }
+
+ // Propagate AllDefsAreReloads. For PHI values, this computes an AND of
+ // all predecessors.
+ if (!SV.AllDefsAreReloads && DepSV.AllDefsAreReloads) {
+ Changed = true;
+ DepSV.AllDefsAreReloads = false;
+ }
+
+ // Propagate best spill value.
+ if (PropSpill && SV.SpillVNI != DepSV.SpillVNI) {
+ if (SV.SpillMBB == DepSV.SpillMBB) {
+ // DepSV is in the same block. Hoist when dominated.
+ if (DepSV.KillsSource && SV.SpillVNI->def < DepSV.SpillVNI->def) {
+ // This is an alternative def earlier in the same MBB.
+ // Hoist the spill as far as possible in SpillMBB. This can ease
+ // register pressure:
+ //
+ // x = def
+ // y = use x
+ // s = copy x
+ //
+ // Hoisting the spill of s to immediately after the def removes the
+ // interference between x and y:
+ //
+ // x = def
+ // spill x
+ // y = use x<kill>
+ //
+ // This hoist only helps when the DepSV copy kills its source.
+ Changed = true;
+ DepSV.SpillReg = SV.SpillReg;
+ DepSV.SpillVNI = SV.SpillVNI;
+ DepSV.SpillMBB = SV.SpillMBB;
+ }
+ } else {
+ // DepSV is in a different block.
+ if (SpillDepth == ~0u)
+ SpillDepth = Loops.getLoopDepth(SV.SpillMBB);
+
+ // Also hoist spills to blocks with smaller loop depth, but make sure
+ // that the new value dominates. Non-phi dependents are always
+ // dominated, phis need checking.
+ if ((Loops.getLoopDepth(DepSV.SpillMBB) > SpillDepth) &&
+ (!DepSVI->first->isPHIDef() ||
+ MDT.dominates(SV.SpillMBB, DepSV.SpillMBB))) {
+ Changed = true;
+ DepSV.SpillReg = SV.SpillReg;
+ DepSV.SpillVNI = SV.SpillVNI;
+ DepSV.SpillMBB = SV.SpillMBB;
+ }
+ }
+ }
+
+ if (!Changed)
+ continue;
+
+ // Something changed in DepSVI. Propagate to dependents.
+ if (WorkSet.insert(DepSVI->first))
+ WorkList.push_back(DepSVI);
+
+ DEBUG(dbgs() << " update " << DepSVI->first->id << '@'
+ << DepSVI->first->def << " to:\t" << DepSV);
+ }
+ } while (!WorkList.empty());
+}
+
+/// traceSiblingValue - Trace a value that is about to be spilled back to the
+/// real defining instructions by looking through sibling copies. Always stay
+/// within the range of OrigVNI so the registers are known to carry the same
+/// value.
+///
+/// Determine if the value is defined by all reloads, so spilling isn't
+/// necessary - the value is already in the stack slot.
+///
+/// Return a defining instruction that may be a candidate for rematerialization.
+///
+MachineInstr *InlineSpiller::traceSiblingValue(unsigned UseReg, VNInfo *UseVNI,
+ VNInfo *OrigVNI) {
+ // Check if a cached value already exists.
+ SibValueMap::iterator SVI;
+ bool Inserted;
+ tie(SVI, Inserted) =
+ SibValues.insert(std::make_pair(UseVNI, SibValueInfo(UseReg, UseVNI)));
+ if (!Inserted) {
+ DEBUG(dbgs() << "Cached value " << PrintReg(UseReg) << ':'
+ << UseVNI->id << '@' << UseVNI->def << ' ' << SVI->second);
+ return SVI->second.DefMI;
+ }
+
+ DEBUG(dbgs() << "Tracing value " << PrintReg(UseReg) << ':'
+ << UseVNI->id << '@' << UseVNI->def << '\n');
+
+ // List of (Reg, VNI) that have been inserted into SibValues, but need to be
+ // processed.
+ SmallVector<std::pair<unsigned, VNInfo*>, 8> WorkList;
+ WorkList.push_back(std::make_pair(UseReg, UseVNI));
+
+ do {
+ unsigned Reg;
+ VNInfo *VNI;
+ tie(Reg, VNI) = WorkList.pop_back_val();
+ DEBUG(dbgs() << " " << PrintReg(Reg) << ':' << VNI->id << '@' << VNI->def
+ << ":\t");
+
+ // First check if this value has already been computed.
+ SVI = SibValues.find(VNI);
+ assert(SVI != SibValues.end() && "Missing SibValues entry");
+
+ // Trace through PHI-defs created by live range splitting.
+ if (VNI->isPHIDef()) {
+ // Stop at original PHIs. We don't know the value at the predecessors.
+ if (VNI->def == OrigVNI->def) {
+ DEBUG(dbgs() << "orig phi value\n");
+ SVI->second.DefByOrigPHI = true;
+ SVI->second.AllDefsAreReloads = false;
+ propagateSiblingValue(SVI);
+ continue;
+ }
+
+ // This is a PHI inserted by live range splitting. We could trace the
+ // live-out value from predecessor blocks, but that search can be very
+ // expensive if there are many predecessors and many more PHIs as
+ // generated by tail-dup when it sees an indirectbr. Instead, look at
+ // all the non-PHI defs that have the same value as OrigVNI. They must
+ // jointly dominate VNI->def. This is not optimal since VNI may actually
+ // be jointly dominated by a smaller subset of defs, so there is a change
+ // we will miss a AllDefsAreReloads optimization.
+
+ // Separate all values dominated by OrigVNI into PHIs and non-PHIs.
+ SmallVector<VNInfo*, 8> PHIs, NonPHIs;
+ LiveInterval &LI = LIS.getInterval(Reg);
+ LiveInterval &OrigLI = LIS.getInterval(Original);
+
+ for (LiveInterval::vni_iterator VI = LI.vni_begin(), VE = LI.vni_end();
+ VI != VE; ++VI) {
+ VNInfo *VNI2 = *VI;
+ if (VNI2->isUnused())
+ continue;
+ if (!OrigLI.containsOneValue() &&
+ OrigLI.getVNInfoAt(VNI2->def) != OrigVNI)
+ continue;
+ if (VNI2->isPHIDef() && VNI2->def != OrigVNI->def)
+ PHIs.push_back(VNI2);
+ else
+ NonPHIs.push_back(VNI2);
+ }
+ DEBUG(dbgs() << "split phi value, checking " << PHIs.size()
+ << " phi-defs, and " << NonPHIs.size()
+ << " non-phi/orig defs\n");
+
+ // Create entries for all the PHIs. Don't add them to the worklist, we
+ // are processing all of them in one go here.
+ for (unsigned i = 0, e = PHIs.size(); i != e; ++i)
+ SibValues.insert(std::make_pair(PHIs[i], SibValueInfo(Reg, PHIs[i])));
+
+ // Add every PHI as a dependent of all the non-PHIs.
+ for (unsigned i = 0, e = NonPHIs.size(); i != e; ++i) {
+ VNInfo *NonPHI = NonPHIs[i];
+ // Known value? Try an insertion.
+ tie(SVI, Inserted) =
+ SibValues.insert(std::make_pair(NonPHI, SibValueInfo(Reg, NonPHI)));
+ // Add all the PHIs as dependents of NonPHI.
+ for (unsigned pi = 0, pe = PHIs.size(); pi != pe; ++pi)
+ SVI->second.Deps.push_back(PHIs[pi]);
+ // This is the first time we see NonPHI, add it to the worklist.
+ if (Inserted)
+ WorkList.push_back(std::make_pair(Reg, NonPHI));
+ else
+ // Propagate to all inserted PHIs, not just VNI.
+ propagateSiblingValue(SVI);
+ }
+
+ // Next work list item.
+ continue;
+ }
+
+ MachineInstr *MI = LIS.getInstructionFromIndex(VNI->def);
+ assert(MI && "Missing def");
+
+ // Trace through sibling copies.
+ if (unsigned SrcReg = isFullCopyOf(MI, Reg)) {
+ if (isSibling(SrcReg)) {
+ LiveInterval &SrcLI = LIS.getInterval(SrcReg);
+ LiveRangeQuery SrcQ(SrcLI, VNI->def);
+ assert(SrcQ.valueIn() && "Copy from non-existing value");
+ // Check if this COPY kills its source.
+ SVI->second.KillsSource = SrcQ.isKill();
+ VNInfo *SrcVNI = SrcQ.valueIn();
+ DEBUG(dbgs() << "copy of " << PrintReg(SrcReg) << ':'
+ << SrcVNI->id << '@' << SrcVNI->def
+ << " kill=" << unsigned(SVI->second.KillsSource) << '\n');
+ // Known sibling source value? Try an insertion.
+ tie(SVI, Inserted) = SibValues.insert(std::make_pair(SrcVNI,
+ SibValueInfo(SrcReg, SrcVNI)));
+ // This is the first time we see Src, add it to the worklist.
+ if (Inserted)
+ WorkList.push_back(std::make_pair(SrcReg, SrcVNI));
+ propagateSiblingValue(SVI, VNI);
+ // Next work list item.
+ continue;
+ }
+ }
+
+ // Track reachable reloads.
+ SVI->second.DefMI = MI;
+ SVI->second.SpillMBB = MI->getParent();
+ int FI;
+ if (Reg == TII.isLoadFromStackSlot(MI, FI) && FI == StackSlot) {
+ DEBUG(dbgs() << "reload\n");
+ propagateSiblingValue(SVI);
+ // Next work list item.
+ continue;
+ }
+
+ // Potential remat candidate.
+ DEBUG(dbgs() << "def " << *MI);
+ SVI->second.AllDefsAreReloads = false;
+ propagateSiblingValue(SVI);
+ } while (!WorkList.empty());
+
+ // Look up the value we were looking for. We already did this lookup at the
+ // top of the function, but SibValues may have been invalidated.
+ SVI = SibValues.find(UseVNI);
+ assert(SVI != SibValues.end() && "Didn't compute requested info");
+ DEBUG(dbgs() << " traced to:\t" << SVI->second);
+ return SVI->second.DefMI;
+}
+
+/// analyzeSiblingValues - Trace values defined by sibling copies back to
+/// something that isn't a sibling copy.
+///
+/// Keep track of values that may be rematerializable.
+void InlineSpiller::analyzeSiblingValues() {
+ SibValues.clear();
+
+ // No siblings at all?
+ if (Edit->getReg() == Original)
+ return;
+
+ LiveInterval &OrigLI = LIS.getInterval(Original);
+ for (unsigned i = 0, e = RegsToSpill.size(); i != e; ++i) {
+ unsigned Reg = RegsToSpill[i];
+ LiveInterval &LI = LIS.getInterval(Reg);
+ for (LiveInterval::const_vni_iterator VI = LI.vni_begin(),
+ VE = LI.vni_end(); VI != VE; ++VI) {
+ VNInfo *VNI = *VI;
+ if (VNI->isUnused())
+ continue;
+ MachineInstr *DefMI = 0;
+ if (!VNI->isPHIDef()) {
+ DefMI = LIS.getInstructionFromIndex(VNI->def);
+ assert(DefMI && "No defining instruction");
+ }
+ // Check possible sibling copies.
+ if (VNI->isPHIDef() || DefMI->isCopy()) {
+ VNInfo *OrigVNI = OrigLI.getVNInfoAt(VNI->def);
+ assert(OrigVNI && "Def outside original live range");
+ if (OrigVNI->def != VNI->def)
+ DefMI = traceSiblingValue(Reg, VNI, OrigVNI);
+ }
+ if (DefMI && Edit->checkRematerializable(VNI, DefMI, AA)) {
+ DEBUG(dbgs() << "Value " << PrintReg(Reg) << ':' << VNI->id << '@'
+ << VNI->def << " may remat from " << *DefMI);
+ }
+ }
+ }
+}
+
+/// hoistSpill - Given a sibling copy that defines a value to be spilled, insert
+/// a spill at a better location.
+bool InlineSpiller::hoistSpill(LiveInterval &SpillLI, MachineInstr *CopyMI) {
+ SlotIndex Idx = LIS.getInstructionIndex(CopyMI);
+ VNInfo *VNI = SpillLI.getVNInfoAt(Idx.getRegSlot());
+ assert(VNI && VNI->def == Idx.getRegSlot() && "Not defined by copy");
+ SibValueMap::iterator I = SibValues.find(VNI);
+ if (I == SibValues.end())
+ return false;
+
+ const SibValueInfo &SVI = I->second;
+
+ // Let the normal folding code deal with the boring case.
+ if (!SVI.AllDefsAreReloads && SVI.SpillVNI == VNI)
+ return false;
+
+ // SpillReg may have been deleted by remat and DCE.
+ if (!LIS.hasInterval(SVI.SpillReg)) {
+ DEBUG(dbgs() << "Stale interval: " << PrintReg(SVI.SpillReg) << '\n');
+ SibValues.erase(I);
+ return false;
+ }
+
+ LiveInterval &SibLI = LIS.getInterval(SVI.SpillReg);
+ if (!SibLI.containsValue(SVI.SpillVNI)) {
+ DEBUG(dbgs() << "Stale value: " << PrintReg(SVI.SpillReg) << '\n');
+ SibValues.erase(I);
+ return false;
+ }
+
+ // Conservatively extend the stack slot range to the range of the original
+ // value. We may be able to do better with stack slot coloring by being more
+ // careful here.
+ assert(StackInt && "No stack slot assigned yet.");
+ LiveInterval &OrigLI = LIS.getInterval(Original);
+ VNInfo *OrigVNI = OrigLI.getVNInfoAt(Idx);
+ StackInt->MergeValueInAsValue(OrigLI, OrigVNI, StackInt->getValNumInfo(0));
+ DEBUG(dbgs() << "\tmerged orig valno " << OrigVNI->id << ": "
+ << *StackInt << '\n');
+
+ // Already spilled everywhere.
+ if (SVI.AllDefsAreReloads) {
+ DEBUG(dbgs() << "\tno spill needed: " << SVI);
+ ++NumOmitReloadSpill;