+static cl::opt<bool> DisablePostRA("disable-post-ra", cl::Hidden,
+ cl::desc("Disable Post Regalloc"));
+static cl::opt<bool> DisableBranchFold("disable-branch-fold", cl::Hidden,
+ cl::desc("Disable branch folding"));
+static cl::opt<bool> DisableTailDuplicate("disable-tail-duplicate", cl::Hidden,
+ cl::desc("Disable tail duplication"));
+static cl::opt<bool> DisableEarlyTailDup("disable-early-taildup", cl::Hidden,
+ cl::desc("Disable pre-register allocation tail duplication"));
+static cl::opt<bool> DisableBlockPlacement("disable-block-placement",
+ cl::Hidden, cl::desc("Disable the probability-driven block placement, and "
+ "re-enable the old code placement pass"));
+static cl::opt<bool> EnableBlockPlacementStats("enable-block-placement-stats",
+ cl::Hidden, cl::desc("Collect probability-driven block placement stats"));
+static cl::opt<bool> DisableCodePlace("disable-code-place", cl::Hidden,
+ cl::desc("Disable code placement"));
+static cl::opt<bool> DisableSSC("disable-ssc", cl::Hidden,
+ cl::desc("Disable Stack Slot Coloring"));
+static cl::opt<bool> DisableMachineDCE("disable-machine-dce", cl::Hidden,
+ cl::desc("Disable Machine Dead Code Elimination"));
+static cl::opt<bool> DisableMachineLICM("disable-machine-licm", cl::Hidden,
+ cl::desc("Disable Machine LICM"));
+static cl::opt<bool> DisableMachineCSE("disable-machine-cse", cl::Hidden,
+ cl::desc("Disable Machine Common Subexpression Elimination"));
+static cl::opt<cl::boolOrDefault>
+OptimizeRegAlloc("optimize-regalloc", cl::Hidden,
+ cl::desc("Enable optimized register allocation compilation path."));
+static cl::opt<cl::boolOrDefault>
+EnableMachineSched("enable-misched", cl::Hidden,
+ cl::desc("Enable the machine instruction scheduling pass."));
+static cl::opt<bool> EnableStrongPHIElim("strong-phi-elim", cl::Hidden,
+ cl::desc("Use strong PHI elimination."));
+static cl::opt<bool> DisablePostRAMachineLICM("disable-postra-machine-licm",
+ cl::Hidden,
+ cl::desc("Disable Machine LICM"));
+static cl::opt<bool> DisableMachineSink("disable-machine-sink", cl::Hidden,
+ cl::desc("Disable Machine Sinking"));
+static cl::opt<bool> DisableLSR("disable-lsr", cl::Hidden,
+ cl::desc("Disable Loop Strength Reduction Pass"));
+static cl::opt<bool> DisableCGP("disable-cgp", cl::Hidden,
+ cl::desc("Disable Codegen Prepare"));
+static cl::opt<bool> DisableCopyProp("disable-copyprop", cl::Hidden,
+ cl::desc("Disable Copy Propagation pass"));
+static cl::opt<bool> PrintLSR("print-lsr-output", cl::Hidden,
+ cl::desc("Print LLVM IR produced by the loop-reduce pass"));
+static cl::opt<bool> PrintISelInput("print-isel-input", cl::Hidden,
+ cl::desc("Print LLVM IR input to isel pass"));
+static cl::opt<bool> PrintGCInfo("print-gc", cl::Hidden,
+ cl::desc("Dump garbage collector data"));
+static cl::opt<bool> VerifyMachineCode("verify-machineinstrs", cl::Hidden,
+ cl::desc("Verify generated machine code"),
+ cl::init(getenv("LLVM_VERIFY_MACHINEINSTRS")!=NULL));
+static cl::opt<std::string>
+PrintMachineInstrs("print-machineinstrs", cl::ValueOptional,
+ cl::desc("Print machine instrs"),
+ cl::value_desc("pass-name"), cl::init("option-unspecified"));
+
+/// Allow standard passes to be disabled by command line options. This supports
+/// simple binary flags that either suppress the pass or do nothing.
+/// i.e. -disable-mypass=false has no effect.
+/// These should be converted to boolOrDefault in order to use applyOverride.
+static AnalysisID applyDisable(AnalysisID ID, bool Override) {
+ if (Override)
+ return &NoPassID;
+ return ID;
+}
+
+/// Allow Pass selection to be overriden by command line options. This supports
+/// flags with ternary conditions. TargetID is passed through by default. The
+/// pass is suppressed when the option is false. When the option is true, the
+/// StandardID is selected if the target provides no default.
+static AnalysisID applyOverride(AnalysisID TargetID, cl::boolOrDefault Override,
+ AnalysisID StandardID) {
+ switch (Override) {
+ case cl::BOU_UNSET:
+ return TargetID;
+ case cl::BOU_TRUE:
+ if (TargetID != &NoPassID)
+ return TargetID;
+ if (StandardID == &NoPassID)
+ report_fatal_error("Target cannot enable pass");
+ return StandardID;
+ case cl::BOU_FALSE:
+ return &NoPassID;
+ }
+ llvm_unreachable("Invalid command line option state");
+}
+
+/// Allow standard passes to be disabled by the command line, regardless of who
+/// is adding the pass.
+///
+/// StandardID is the pass identified in the standard pass pipeline and provided
+/// to addPass(). It may be a target-specific ID in the case that the target
+/// directly adds its own pass, but in that case we harmlessly fall through.
+///
+/// TargetID is the pass that the target has configured to override StandardID.
+///
+/// StandardID may be a pseudo ID. In that case TargetID is the name of the real
+/// pass to run. This allows multiple options to control a single pass depending
+/// on where in the pipeline that pass is added.
+static AnalysisID overridePass(AnalysisID StandardID, AnalysisID TargetID) {
+ if (StandardID == &PostRASchedulerID)
+ return applyDisable(TargetID, DisablePostRA);
+
+ if (StandardID == &BranchFolderPassID)
+ return applyDisable(TargetID, DisableBranchFold);
+
+ if (StandardID == &TailDuplicateID)
+ return applyDisable(TargetID, DisableTailDuplicate);
+
+ if (StandardID == &TargetPassConfig::EarlyTailDuplicateID)
+ return applyDisable(TargetID, DisableEarlyTailDup);
+
+ if (StandardID == &MachineBlockPlacementID)
+ return applyDisable(TargetID, DisableCodePlace);
+
+ if (StandardID == &CodePlacementOptID)
+ return applyDisable(TargetID, DisableCodePlace);
+
+ if (StandardID == &StackSlotColoringID)
+ return applyDisable(TargetID, DisableSSC);
+
+ if (StandardID == &DeadMachineInstructionElimID)
+ return applyDisable(TargetID, DisableMachineDCE);
+
+ if (StandardID == &MachineLICMID)
+ return applyDisable(TargetID, DisableMachineLICM);
+
+ if (StandardID == &MachineCSEID)
+ return applyDisable(TargetID, DisableMachineCSE);
+
+ if (StandardID == &MachineSchedulerID)
+ return applyOverride(TargetID, EnableMachineSched, StandardID);
+
+ if (StandardID == &TargetPassConfig::PostRAMachineLICMID)
+ return applyDisable(TargetID, DisablePostRAMachineLICM);
+
+ if (StandardID == &MachineSinkingID)
+ return applyDisable(TargetID, DisableMachineSink);
+
+ if (StandardID == &MachineCopyPropagationID)
+ return applyDisable(TargetID, DisableCopyProp);
+
+ return TargetID;
+}
+
+//===---------------------------------------------------------------------===//
+/// TargetPassConfig
+//===---------------------------------------------------------------------===//
+
+INITIALIZE_PASS(TargetPassConfig, "targetpassconfig",
+ "Target Pass Configuration", false, false)
+char TargetPassConfig::ID = 0;
+
+static char NoPassIDAnchor = 0;
+char &llvm::NoPassID = NoPassIDAnchor;
+
+// Pseudo Pass IDs.
+char TargetPassConfig::EarlyTailDuplicateID = 0;
+char TargetPassConfig::PostRAMachineLICMID = 0;
+
+namespace llvm {
+class PassConfigImpl {
+public:
+ // List of passes explicitly substituted by this target. Normally this is
+ // empty, but it is a convenient way to suppress or replace specific passes
+ // that are part of a standard pass pipeline without overridding the entire
+ // pipeline. This mechanism allows target options to inherit a standard pass's
+ // user interface. For example, a target may disable a standard pass by
+ // default by substituting NoPass, and the user may still enable that standard
+ // pass with an explicit command line option.
+ DenseMap<AnalysisID,AnalysisID> TargetPasses;
+
+ /// Store the pairs of <AnalysisID, AnalysisID> of which the second pass
+ /// is inserted after each instance of the first one.
+ SmallVector<std::pair<AnalysisID, AnalysisID>, 4> InsertedPasses;
+};
+} // namespace llvm
+
+// Out of line virtual method.
+TargetPassConfig::~TargetPassConfig() {
+ delete Impl;
+}
+
+// Out of line constructor provides default values for pass options and
+// registers all common codegen passes.
+TargetPassConfig::TargetPassConfig(TargetMachine *tm, PassManagerBase &pm)
+ : ImmutablePass(ID), TM(tm), PM(&pm), Impl(0), Initialized(false),
+ DisableVerify(false),
+ EnableTailMerge(true) {
+
+ Impl = new PassConfigImpl();
+
+ // Register all target independent codegen passes to activate their PassIDs,
+ // including this pass itself.
+ initializeCodeGen(*PassRegistry::getPassRegistry());
+
+ // Substitute Pseudo Pass IDs for real ones.
+ substitutePass(EarlyTailDuplicateID, TailDuplicateID);
+ substitutePass(PostRAMachineLICMID, MachineLICMID);
+
+ // Temporarily disable experimental passes.
+ substitutePass(MachineSchedulerID, NoPassID);
+}
+
+/// Insert InsertedPassID pass after TargetPassID.
+void TargetPassConfig::insertPass(const char &TargetPassID,
+ const char &InsertedPassID) {
+ assert(&TargetPassID != &InsertedPassID && "Insert a pass after itself!");
+ std::pair<AnalysisID, AnalysisID> P(&TargetPassID, &InsertedPassID);
+ Impl->InsertedPasses.push_back(P);
+}
+
+/// createPassConfig - Create a pass configuration object to be used by
+/// addPassToEmitX methods for generating a pipeline of CodeGen passes.
+///
+/// Targets may override this to extend TargetPassConfig.
+TargetPassConfig *LLVMTargetMachine::createPassConfig(PassManagerBase &PM) {
+ return new TargetPassConfig(this, PM);
+}
+
+TargetPassConfig::TargetPassConfig()
+ : ImmutablePass(ID), PM(0) {
+ llvm_unreachable("TargetPassConfig should not be constructed on-the-fly");
+}
+
+// Helper to verify the analysis is really immutable.
+void TargetPassConfig::setOpt(bool &Opt, bool Val) {
+ assert(!Initialized && "PassConfig is immutable");
+ Opt = Val;
+}
+
+void TargetPassConfig::substitutePass(char &StandardID, char &TargetID) {
+ Impl->TargetPasses[&StandardID] = &TargetID;
+}
+
+AnalysisID TargetPassConfig::getPassSubstitution(AnalysisID ID) const {
+ DenseMap<AnalysisID, AnalysisID>::const_iterator
+ I = Impl->TargetPasses.find(ID);
+ if (I == Impl->TargetPasses.end())
+ return ID;
+ return I->second;
+}
+
+/// Add a CodeGen pass at this point in the pipeline after checking for target
+/// and command line overrides.
+AnalysisID TargetPassConfig::addPass(char &ID) {
+ assert(!Initialized && "PassConfig is immutable");
+
+ AnalysisID TargetID = getPassSubstitution(&ID);
+ AnalysisID FinalID = overridePass(&ID, TargetID);
+ if (FinalID == &NoPassID)
+ return FinalID;
+
+ Pass *P = Pass::createPass(FinalID);
+ if (!P)
+ llvm_unreachable("Pass ID not registered");
+ PM->add(P);
+ // Add the passes after the pass P if there is any.
+ for (SmallVector<std::pair<AnalysisID, AnalysisID>, 4>::iterator
+ I = Impl->InsertedPasses.begin(), E = Impl->InsertedPasses.end();
+ I != E; ++I) {
+ if ((*I).first == &ID) {
+ assert((*I).second && "Illegal Pass ID!");
+ Pass *NP = Pass::createPass((*I).second);
+ assert(NP && "Pass ID not registered");
+ PM->add(NP);
+ }
+ }
+ return FinalID;
+}
+
+void TargetPassConfig::printAndVerify(const char *Banner) const {
+ if (TM->shouldPrintMachineCode())
+ PM->add(createMachineFunctionPrinterPass(dbgs(), Banner));
+
+ if (VerifyMachineCode)
+ PM->add(createMachineVerifierPass(Banner));
+}
+
+/// Add common target configurable passes that perform LLVM IR to IR transforms
+/// following machine independent optimization.
+void TargetPassConfig::addIRPasses() {
+ // Basic AliasAnalysis support.
+ // Add TypeBasedAliasAnalysis before BasicAliasAnalysis so that
+ // BasicAliasAnalysis wins if they disagree. This is intended to help
+ // support "obvious" type-punning idioms.
+ PM->add(createTypeBasedAliasAnalysisPass());
+ PM->add(createBasicAliasAnalysisPass());
+
+ // Before running any passes, run the verifier to determine if the input
+ // coming from the front-end and/or optimizer is valid.
+ if (!DisableVerify)
+ PM->add(createVerifierPass());
+
+ // Run loop strength reduction before anything else.
+ if (getOptLevel() != CodeGenOpt::None && !DisableLSR) {
+ PM->add(createLoopStrengthReducePass(getTargetLowering()));
+ if (PrintLSR)
+ PM->add(createPrintFunctionPass("\n\n*** Code after LSR ***\n", &dbgs()));
+ }
+
+ PM->add(createGCLoweringPass());
+
+ // Make sure that no unreachable blocks are instruction selected.
+ PM->add(createUnreachableBlockEliminationPass());
+}
+
+/// Add common passes that perform LLVM IR to IR transforms in preparation for
+/// instruction selection.
+void TargetPassConfig::addISelPrepare() {
+ if (getOptLevel() != CodeGenOpt::None && !DisableCGP)
+ PM->add(createCodeGenPreparePass(getTargetLowering()));
+
+ PM->add(createStackProtectorPass(getTargetLowering()));
+
+ addPreISel();
+
+ if (PrintISelInput)
+ PM->add(createPrintFunctionPass("\n\n"
+ "*** Final LLVM Code input to ISel ***\n",
+ &dbgs()));
+
+ // All passes which modify the LLVM IR are now complete; run the verifier
+ // to ensure that the IR is valid.
+ if (!DisableVerify)
+ PM->add(createVerifierPass());
+}
+
+/// Add the complete set of target-independent postISel code generator passes.
+///
+/// This can be read as the standard order of major LLVM CodeGen stages. Stages
+/// with nontrivial configuration or multiple passes are broken out below in
+/// add%Stage routines.
+///
+/// Any TargetPassConfig::addXX routine may be overriden by the Target. The
+/// addPre/Post methods with empty header implementations allow injecting
+/// target-specific fixups just before or after major stages. Additionally,
+/// targets have the flexibility to change pass order within a stage by
+/// overriding default implementation of add%Stage routines below. Each
+/// technique has maintainability tradeoffs because alternate pass orders are
+/// not well supported. addPre/Post works better if the target pass is easily
+/// tied to a common pass. But if it has subtle dependencies on multiple passes,
+/// the target should override the stage instead.
+///
+/// TODO: We could use a single addPre/Post(ID) hook to allow pass injection
+/// before/after any target-independent pass. But it's currently overkill.
+void TargetPassConfig::addMachinePasses() {
+ // Print the instruction selected machine code...
+ printAndVerify("After Instruction Selection");
+
+ // Insert a machine instr printer pass after the specified pass.
+ // If -print-machineinstrs specified, print machineinstrs after all passes.
+ if (StringRef(PrintMachineInstrs.getValue()).equals(""))
+ TM->Options.PrintMachineCode = true;
+ else if (!StringRef(PrintMachineInstrs.getValue())
+ .equals("option-unspecified")) {
+ const PassRegistry *PR = PassRegistry::getPassRegistry();
+ const PassInfo *TPI = PR->getPassInfo(PrintMachineInstrs.getValue());
+ const PassInfo *IPI = PR->getPassInfo(StringRef("print-machineinstrs"));
+ assert (TPI && IPI && "Pass ID not registered!");
+ const char *TID = (char *)(TPI->getTypeInfo());
+ const char *IID = (char *)(IPI->getTypeInfo());
+ insertPass(*TID, *IID);
+ }
+
+ // Expand pseudo-instructions emitted by ISel.
+ addPass(ExpandISelPseudosID);
+
+ // Add passes that optimize machine instructions in SSA form.
+ if (getOptLevel() != CodeGenOpt::None) {
+ addMachineSSAOptimization();
+ }
+ else {
+ // If the target requests it, assign local variables to stack slots relative
+ // to one another and simplify frame index references where possible.
+ addPass(LocalStackSlotAllocationID);
+ }
+
+ // Run pre-ra passes.
+ if (addPreRegAlloc())
+ printAndVerify("After PreRegAlloc passes");
+
+ // Run register allocation and passes that are tightly coupled with it,
+ // including phi elimination and scheduling.
+ if (getOptimizeRegAlloc())
+ addOptimizedRegAlloc(createRegAllocPass(true));
+ else
+ addFastRegAlloc(createRegAllocPass(false));
+
+ // Run post-ra passes.
+ if (addPostRegAlloc())
+ printAndVerify("After PostRegAlloc passes");
+
+ // Insert prolog/epilog code. Eliminate abstract frame index references...
+ addPass(PrologEpilogCodeInserterID);
+ printAndVerify("After PrologEpilogCodeInserter");
+
+ /// Add passes that optimize machine instructions after register allocation.
+ if (getOptLevel() != CodeGenOpt::None)
+ addMachineLateOptimization();
+
+ // Expand pseudo instructions before second scheduling pass.
+ addPass(ExpandPostRAPseudosID);
+ printAndVerify("After ExpandPostRAPseudos");
+
+ // Run pre-sched2 passes.
+ if (addPreSched2())
+ printAndVerify("After PreSched2 passes");
+
+ // Second pass scheduler.
+ if (getOptLevel() != CodeGenOpt::None) {
+ addPass(PostRASchedulerID);
+ printAndVerify("After PostRAScheduler");
+ }
+
+ // GC
+ addPass(GCMachineCodeAnalysisID);
+ if (PrintGCInfo)
+ PM->add(createGCInfoPrinter(dbgs()));
+
+ // Basic block placement.
+ if (getOptLevel() != CodeGenOpt::None)
+ addBlockPlacement();
+
+ if (addPreEmitPass())
+ printAndVerify("After PreEmit passes");
+}
+
+/// Add passes that optimize machine instructions in SSA form.
+void TargetPassConfig::addMachineSSAOptimization() {
+ // Pre-ra tail duplication.
+ if (addPass(EarlyTailDuplicateID) != &NoPassID)
+ printAndVerify("After Pre-RegAlloc TailDuplicate");
+
+ // Optimize PHIs before DCE: removing dead PHI cycles may make more
+ // instructions dead.
+ addPass(OptimizePHIsID);
+
+ // If the target requests it, assign local variables to stack slots relative
+ // to one another and simplify frame index references where possible.
+ addPass(LocalStackSlotAllocationID);
+
+ // With optimization, dead code should already be eliminated. However
+ // there is one known exception: lowered code for arguments that are only
+ // used by tail calls, where the tail calls reuse the incoming stack
+ // arguments directly (see t11 in test/CodeGen/X86/sibcall.ll).
+ addPass(DeadMachineInstructionElimID);
+ printAndVerify("After codegen DCE pass");
+
+ addPass(MachineLICMID);
+ addPass(MachineCSEID);
+ addPass(MachineSinkingID);
+ printAndVerify("After Machine LICM, CSE and Sinking passes");
+
+ addPass(PeepholeOptimizerID);
+ printAndVerify("After codegen peephole optimization pass");
+}
+
+//===---------------------------------------------------------------------===//
+/// Register Allocation Pass Configuration
+//===---------------------------------------------------------------------===//
+
+bool TargetPassConfig::getOptimizeRegAlloc() const {
+ switch (OptimizeRegAlloc) {
+ case cl::BOU_UNSET: return getOptLevel() != CodeGenOpt::None;
+ case cl::BOU_TRUE: return true;
+ case cl::BOU_FALSE: return false;
+ }
+ llvm_unreachable("Invalid optimize-regalloc state");
+}
+
+/// RegisterRegAlloc's global Registry tracks allocator registration.
+MachinePassRegistry RegisterRegAlloc::Registry;
+
+/// A dummy default pass factory indicates whether the register allocator is
+/// overridden on the command line.
+static FunctionPass *useDefaultRegisterAllocator() { return 0; }
+static RegisterRegAlloc
+defaultRegAlloc("default",
+ "pick register allocator based on -O option",
+ useDefaultRegisterAllocator);
+
+/// -regalloc=... command line option.
+static cl::opt<RegisterRegAlloc::FunctionPassCtor, false,
+ RegisterPassParser<RegisterRegAlloc> >
+RegAlloc("regalloc",
+ cl::init(&useDefaultRegisterAllocator),
+ cl::desc("Register allocator to use"));
+
+
+/// Instantiate the default register allocator pass for this target for either
+/// the optimized or unoptimized allocation path. This will be added to the pass
+/// manager by addFastRegAlloc in the unoptimized case or addOptimizedRegAlloc
+/// in the optimized case.
+///
+/// A target that uses the standard regalloc pass order for fast or optimized
+/// allocation may still override this for per-target regalloc
+/// selection. But -regalloc=... always takes precedence.
+FunctionPass *TargetPassConfig::createTargetRegisterAllocator(bool Optimized) {
+ if (Optimized)
+ return createGreedyRegisterAllocator();
+ else
+ return createFastRegisterAllocator();
+}
+
+/// Find and instantiate the register allocation pass requested by this target
+/// at the current optimization level. Different register allocators are
+/// defined as separate passes because they may require different analysis.
+///
+/// This helper ensures that the regalloc= option is always available,
+/// even for targets that override the default allocator.
+///
+/// FIXME: When MachinePassRegistry register pass IDs instead of function ptrs,
+/// this can be folded into addPass.
+FunctionPass *TargetPassConfig::createRegAllocPass(bool Optimized) {
+ RegisterRegAlloc::FunctionPassCtor Ctor = RegisterRegAlloc::getDefault();
+
+ // Initialize the global default.
+ if (!Ctor) {
+ Ctor = RegAlloc;
+ RegisterRegAlloc::setDefault(RegAlloc);
+ }
+ if (Ctor != useDefaultRegisterAllocator)
+ return Ctor();
+
+ // With no -regalloc= override, ask the target for a regalloc pass.
+ return createTargetRegisterAllocator(Optimized);
+}
+
+/// Add the minimum set of target-independent passes that are required for
+/// register allocation. No coalescing or scheduling.
+void TargetPassConfig::addFastRegAlloc(FunctionPass *RegAllocPass) {
+ addPass(PHIEliminationID);
+ addPass(TwoAddressInstructionPassID);
+
+ PM->add(RegAllocPass);
+ printAndVerify("After Register Allocation");
+}
+
+/// Add standard target-independent passes that are tightly coupled with
+/// optimized register allocation, including coalescing, machine instruction
+/// scheduling, and register allocation itself.
+void TargetPassConfig::addOptimizedRegAlloc(FunctionPass *RegAllocPass) {
+ addPass(ProcessImplicitDefsID);
+
+ // LiveVariables currently requires pure SSA form.
+ //
+ // FIXME: Once TwoAddressInstruction pass no longer uses kill flags,
+ // LiveVariables can be removed completely, and LiveIntervals can be directly
+ // computed. (We still either need to regenerate kill flags after regalloc, or
+ // preferably fix the scavenger to not depend on them).
+ addPass(LiveVariablesID);
+
+ // Add passes that move from transformed SSA into conventional SSA. This is a
+ // "copy coalescing" problem.
+ //
+ if (!EnableStrongPHIElim) {
+ // Edge splitting is smarter with machine loop info.
+ addPass(MachineLoopInfoID);
+ addPass(PHIEliminationID);