+ CountRegisters(F, LUIdx);
+ return true;
+}
+
+/// CollectLoopInvariantFixupsAndFormulae - Check for other uses of
+/// loop-invariant values which we're tracking. These other uses will pin these
+/// values in registers, making them less profitable for elimination.
+/// TODO: This currently misses non-constant addrec step registers.
+/// TODO: Should this give more weight to users inside the loop?
+void
+LSRInstance::CollectLoopInvariantFixupsAndFormulae() {
+ SmallVector<const SCEV *, 8> Worklist(RegUses.begin(), RegUses.end());
+ SmallPtrSet<const SCEV *, 8> Inserted;
+
+ while (!Worklist.empty()) {
+ const SCEV *S = Worklist.pop_back_val();
+
+ if (const SCEVNAryExpr *N = dyn_cast<SCEVNAryExpr>(S))
+ Worklist.insert(Worklist.end(), N->op_begin(), N->op_end());
+ else if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S))
+ Worklist.push_back(C->getOperand());
+ else if (const SCEVUDivExpr *D = dyn_cast<SCEVUDivExpr>(S)) {
+ Worklist.push_back(D->getLHS());
+ Worklist.push_back(D->getRHS());
+ } else if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(S)) {
+ if (!Inserted.insert(U)) continue;
+ const Value *V = U->getValue();
+ if (const Instruction *Inst = dyn_cast<Instruction>(V))
+ if (L->contains(Inst)) continue;
+ for (Value::use_const_iterator UI = V->use_begin(), UE = V->use_end();
+ UI != UE; ++UI) {
+ const Instruction *UserInst = dyn_cast<Instruction>(*UI);
+ // Ignore non-instructions.
+ if (!UserInst)
+ continue;
+ // Ignore instructions in other functions (as can happen with
+ // Constants).
+ if (UserInst->getParent()->getParent() != L->getHeader()->getParent())
+ continue;
+ // Ignore instructions not dominated by the loop.
+ const BasicBlock *UseBB = !isa<PHINode>(UserInst) ?
+ UserInst->getParent() :
+ cast<PHINode>(UserInst)->getIncomingBlock(
+ PHINode::getIncomingValueNumForOperand(UI.getOperandNo()));
+ if (!DT.dominates(L->getHeader(), UseBB))
+ continue;
+ // Ignore uses which are part of other SCEV expressions, to avoid
+ // analyzing them multiple times.
+ if (SE.isSCEVable(UserInst->getType()) &&
+ !isa<SCEVUnknown>(SE.getSCEV(const_cast<Instruction *>(UserInst))))
+ continue;
+ // Ignore icmp instructions which are already being analyzed.
+ if (const ICmpInst *ICI = dyn_cast<ICmpInst>(UserInst)) {
+ unsigned OtherIdx = !UI.getOperandNo();
+ Value *OtherOp = const_cast<Value *>(ICI->getOperand(OtherIdx));
+ if (SE.getSCEV(OtherOp)->hasComputableLoopEvolution(L))
+ continue;
+ }
+
+ LSRFixup &LF = getNewFixup();
+ LF.UserInst = const_cast<Instruction *>(UserInst);
+ LF.OperandValToReplace = UI.getUse();
+ std::pair<size_t, int64_t> P = getUse(S, LSRUse::Basic, 0);
+ LF.LUIdx = P.first;
+ LF.Offset = P.second;
+ LSRUse &LU = Uses[LF.LUIdx];
+ LU.AllFixupsOutsideLoop &= L->contains(LF.UserInst);
+ InsertSupplementalFormula(U, LU, LF.LUIdx);
+ CountRegisters(LU.Formulae.back(), Uses.size() - 1);
+ break;
+ }
+ }
+ }
+}
+
+/// CollectSubexprs - Split S into subexpressions which can be pulled out into
+/// separate registers. If C is non-null, multiply each subexpression by C.
+static void CollectSubexprs(const SCEV *S, const SCEVConstant *C,
+ SmallVectorImpl<const SCEV *> &Ops,
+ ScalarEvolution &SE) {
+ if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
+ // Break out add operands.
+ for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
+ I != E; ++I)
+ CollectSubexprs(*I, C, Ops, SE);
+ return;
+ } else if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
+ // Split a non-zero base out of an addrec.
+ if (!AR->getStart()->isZero()) {
+ CollectSubexprs(SE.getAddRecExpr(SE.getIntegerSCEV(0, AR->getType()),
+ AR->getStepRecurrence(SE),
+ AR->getLoop()), C, Ops, SE);
+ CollectSubexprs(AR->getStart(), C, Ops, SE);
+ return;
+ }
+ } else if (const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(S)) {
+ // Break (C * (a + b + c)) into C*a + C*b + C*c.
+ if (Mul->getNumOperands() == 2)
+ if (const SCEVConstant *Op0 =
+ dyn_cast<SCEVConstant>(Mul->getOperand(0))) {
+ CollectSubexprs(Mul->getOperand(1),
+ C ? cast<SCEVConstant>(SE.getMulExpr(C, Op0)) : Op0,
+ Ops, SE);
+ return;
+ }
+ }
+
+ // Otherwise use the value itself.
+ Ops.push_back(C ? SE.getMulExpr(C, S) : S);
+}
+
+/// GenerateReassociations - Split out subexpressions from adds and the bases of
+/// addrecs.
+void LSRInstance::GenerateReassociations(LSRUse &LU, unsigned LUIdx,
+ Formula Base,
+ unsigned Depth) {
+ // Arbitrarily cap recursion to protect compile time.
+ if (Depth >= 3) return;
+
+ for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i) {
+ const SCEV *BaseReg = Base.BaseRegs[i];
+
+ SmallVector<const SCEV *, 8> AddOps;
+ CollectSubexprs(BaseReg, 0, AddOps, SE);
+ if (AddOps.size() == 1) continue;
+
+ for (SmallVectorImpl<const SCEV *>::const_iterator J = AddOps.begin(),
+ JE = AddOps.end(); J != JE; ++J) {
+ // Don't pull a constant into a register if the constant could be folded
+ // into an immediate field.
+ if (isAlwaysFoldable(*J, LU.MinOffset, LU.MaxOffset,
+ Base.getNumRegs() > 1,
+ LU.Kind, LU.AccessTy, TLI, SE))
+ continue;
+
+ // Collect all operands except *J.
+ SmallVector<const SCEV *, 8> InnerAddOps;
+ for (SmallVectorImpl<const SCEV *>::const_iterator K = AddOps.begin(),
+ KE = AddOps.end(); K != KE; ++K)
+ if (K != J)
+ InnerAddOps.push_back(*K);
+
+ // Don't leave just a constant behind in a register if the constant could
+ // be folded into an immediate field.
+ if (InnerAddOps.size() == 1 &&
+ isAlwaysFoldable(InnerAddOps[0], LU.MinOffset, LU.MaxOffset,
+ Base.getNumRegs() > 1,
+ LU.Kind, LU.AccessTy, TLI, SE))
+ continue;
+
+ Formula F = Base;
+ F.BaseRegs[i] = SE.getAddExpr(InnerAddOps);
+ F.BaseRegs.push_back(*J);
+ if (InsertFormula(LU, LUIdx, F))
+ // If that formula hadn't been seen before, recurse to find more like
+ // it.
+ GenerateReassociations(LU, LUIdx, LU.Formulae.back(), Depth+1);
+ }
+ }
+}
+
+/// GenerateCombinations - Generate a formula consisting of all of the
+/// loop-dominating registers added into a single register.
+void LSRInstance::GenerateCombinations(LSRUse &LU, unsigned LUIdx,
+ Formula Base) {
+ // This method is only intersting on a plurality of registers.
+ if (Base.BaseRegs.size() <= 1) return;
+
+ Formula F = Base;
+ F.BaseRegs.clear();
+ SmallVector<const SCEV *, 4> Ops;
+ for (SmallVectorImpl<const SCEV *>::const_iterator
+ I = Base.BaseRegs.begin(), E = Base.BaseRegs.end(); I != E; ++I) {
+ const SCEV *BaseReg = *I;
+ if (BaseReg->properlyDominates(L->getHeader(), &DT) &&
+ !BaseReg->hasComputableLoopEvolution(L))
+ Ops.push_back(BaseReg);
+ else
+ F.BaseRegs.push_back(BaseReg);
+ }
+ if (Ops.size() > 1) {
+ const SCEV *Sum = SE.getAddExpr(Ops);
+ // TODO: If Sum is zero, it probably means ScalarEvolution missed an
+ // opportunity to fold something. For now, just ignore such cases
+ // rather than procede with zero in a register.
+ if (!Sum->isZero()) {
+ F.BaseRegs.push_back(Sum);
+ (void)InsertFormula(LU, LUIdx, F);
+ }
+ }
+}
+
+/// GenerateSymbolicOffsets - Generate reuse formulae using symbolic offsets.
+void LSRInstance::GenerateSymbolicOffsets(LSRUse &LU, unsigned LUIdx,
+ Formula Base) {
+ // We can't add a symbolic offset if the address already contains one.
+ if (Base.AM.BaseGV) return;
+
+ for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i) {
+ const SCEV *G = Base.BaseRegs[i];
+ GlobalValue *GV = ExtractSymbol(G, SE);
+ if (G->isZero() || !GV)
+ continue;
+ Formula F = Base;
+ F.AM.BaseGV = GV;
+ if (!isLegalUse(F.AM, LU.MinOffset, LU.MaxOffset,
+ LU.Kind, LU.AccessTy, TLI))
+ continue;
+ F.BaseRegs[i] = G;
+ (void)InsertFormula(LU, LUIdx, F);
+ }
+}
+
+/// GenerateConstantOffsets - Generate reuse formulae using symbolic offsets.
+void LSRInstance::GenerateConstantOffsets(LSRUse &LU, unsigned LUIdx,
+ Formula Base) {
+ // TODO: For now, just add the min and max offset, because it usually isn't
+ // worthwhile looking at everything inbetween.
+ SmallVector<int64_t, 4> Worklist;
+ Worklist.push_back(LU.MinOffset);
+ if (LU.MaxOffset != LU.MinOffset)
+ Worklist.push_back(LU.MaxOffset);
+
+ for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i) {
+ const SCEV *G = Base.BaseRegs[i];
+
+ for (SmallVectorImpl<int64_t>::const_iterator I = Worklist.begin(),
+ E = Worklist.end(); I != E; ++I) {
+ Formula F = Base;
+ F.AM.BaseOffs = (uint64_t)Base.AM.BaseOffs - *I;
+ if (isLegalUse(F.AM, LU.MinOffset - *I, LU.MaxOffset - *I,
+ LU.Kind, LU.AccessTy, TLI)) {
+ F.BaseRegs[i] = SE.getAddExpr(G, SE.getIntegerSCEV(*I, G->getType()));
+
+ (void)InsertFormula(LU, LUIdx, F);
+ }
+ }
+
+ int64_t Imm = ExtractImmediate(G, SE);
+ if (G->isZero() || Imm == 0)
+ continue;
+ Formula F = Base;
+ F.AM.BaseOffs = (uint64_t)F.AM.BaseOffs + Imm;
+ if (!isLegalUse(F.AM, LU.MinOffset, LU.MaxOffset,
+ LU.Kind, LU.AccessTy, TLI))
+ continue;
+ F.BaseRegs[i] = G;
+ (void)InsertFormula(LU, LUIdx, F);
+ }
+}
+
+/// GenerateICmpZeroScales - For ICmpZero, check to see if we can scale up
+/// the comparison. For example, x == y -> x*c == y*c.
+void LSRInstance::GenerateICmpZeroScales(LSRUse &LU, unsigned LUIdx,
+ Formula Base) {
+ if (LU.Kind != LSRUse::ICmpZero) return;
+
+ // Determine the integer type for the base formula.
+ const Type *IntTy = Base.getType();
+ if (!IntTy) return;
+ if (SE.getTypeSizeInBits(IntTy) > 64) return;
+
+ // Don't do this if there is more than one offset.
+ if (LU.MinOffset != LU.MaxOffset) return;
+
+ assert(!Base.AM.BaseGV && "ICmpZero use is not legal!");
+
+ // Check each interesting stride.
+ for (SmallSetVector<int64_t, 8>::const_iterator
+ I = Factors.begin(), E = Factors.end(); I != E; ++I) {
+ int64_t Factor = *I;
+ Formula F = Base;
+
+ // Check that the multiplication doesn't overflow.
+ if (F.AM.BaseOffs == INT64_MIN && Factor == -1)
+ continue;
+ F.AM.BaseOffs = (uint64_t)Base.AM.BaseOffs * Factor;
+ if (F.AM.BaseOffs / Factor != Base.AM.BaseOffs)
+ continue;
+
+ // Check that multiplying with the use offset doesn't overflow.
+ int64_t Offset = LU.MinOffset;
+ if (Offset == INT64_MIN && Factor == -1)
+ continue;
+ Offset = (uint64_t)Offset * Factor;
+ if (Offset / Factor != LU.MinOffset)
+ continue;
+
+ // Check that this scale is legal.
+ if (!isLegalUse(F.AM, Offset, Offset, LU.Kind, LU.AccessTy, TLI))
+ continue;
+
+ // Compensate for the use having MinOffset built into it.
+ F.AM.BaseOffs = (uint64_t)F.AM.BaseOffs + Offset - LU.MinOffset;
+
+ const SCEV *FactorS = SE.getIntegerSCEV(Factor, IntTy);
+
+ // Check that multiplying with each base register doesn't overflow.
+ for (size_t i = 0, e = F.BaseRegs.size(); i != e; ++i) {
+ F.BaseRegs[i] = SE.getMulExpr(F.BaseRegs[i], FactorS);
+ if (getExactSDiv(F.BaseRegs[i], FactorS, SE) != Base.BaseRegs[i])
+ goto next;
+ }
+
+ // Check that multiplying with the scaled register doesn't overflow.
+ if (F.ScaledReg) {
+ F.ScaledReg = SE.getMulExpr(F.ScaledReg, FactorS);
+ if (getExactSDiv(F.ScaledReg, FactorS, SE) != Base.ScaledReg)
+ continue;
+ }
+
+ // If we make it here and it's legal, add it.
+ (void)InsertFormula(LU, LUIdx, F);
+ next:;
+ }
+}
+
+/// GenerateScales - Generate stride factor reuse formulae by making use of
+/// scaled-offset address modes, for example.
+void LSRInstance::GenerateScales(LSRUse &LU, unsigned LUIdx,
+ Formula Base) {
+ // Determine the integer type for the base formula.
+ const Type *IntTy = Base.getType();
+ if (!IntTy) return;
+
+ // If this Formula already has a scaled register, we can't add another one.
+ if (Base.AM.Scale != 0) return;
+
+ // Check each interesting stride.
+ for (SmallSetVector<int64_t, 8>::const_iterator
+ I = Factors.begin(), E = Factors.end(); I != E; ++I) {
+ int64_t Factor = *I;
+
+ Base.AM.Scale = Factor;
+ Base.AM.HasBaseReg = Base.BaseRegs.size() > 1;
+ // Check whether this scale is going to be legal.
+ if (!isLegalUse(Base.AM, LU.MinOffset, LU.MaxOffset,
+ LU.Kind, LU.AccessTy, TLI)) {
+ // As a special-case, handle special out-of-loop Basic users specially.
+ // TODO: Reconsider this special case.
+ if (LU.Kind == LSRUse::Basic &&
+ isLegalUse(Base.AM, LU.MinOffset, LU.MaxOffset,
+ LSRUse::Special, LU.AccessTy, TLI) &&
+ LU.AllFixupsOutsideLoop)
+ LU.Kind = LSRUse::Special;
+ else
+ continue;
+ }
+ // For an ICmpZero, negating a solitary base register won't lead to
+ // new solutions.
+ if (LU.Kind == LSRUse::ICmpZero &&
+ !Base.AM.HasBaseReg && Base.AM.BaseOffs == 0 && !Base.AM.BaseGV)
+ continue;
+ // For each addrec base reg, apply the scale, if possible.
+ for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i)
+ if (const SCEVAddRecExpr *AR =
+ dyn_cast<SCEVAddRecExpr>(Base.BaseRegs[i])) {
+ const SCEV *FactorS = SE.getIntegerSCEV(Factor, IntTy);
+ if (FactorS->isZero())
+ continue;
+ // Divide out the factor, ignoring high bits, since we'll be
+ // scaling the value back up in the end.
+ if (const SCEV *Quotient = getExactSDiv(AR, FactorS, SE, true)) {
+ // TODO: This could be optimized to avoid all the copying.
+ Formula F = Base;
+ F.ScaledReg = Quotient;
+ std::swap(F.BaseRegs[i], F.BaseRegs.back());
+ F.BaseRegs.pop_back();
+ (void)InsertFormula(LU, LUIdx, F);
+ }
+ }
+ }
+}
+
+/// GenerateTruncates - Generate reuse formulae from different IV types.
+void LSRInstance::GenerateTruncates(LSRUse &LU, unsigned LUIdx,
+ Formula Base) {
+ // This requires TargetLowering to tell us which truncates are free.
+ if (!TLI) return;
+
+ // Don't bother truncating symbolic values.
+ if (Base.AM.BaseGV) return;
+
+ // Determine the integer type for the base formula.
+ const Type *DstTy = Base.getType();
+ if (!DstTy) return;
+ DstTy = SE.getEffectiveSCEVType(DstTy);
+
+ for (SmallSetVector<const Type *, 4>::const_iterator
+ I = Types.begin(), E = Types.end(); I != E; ++I) {
+ const Type *SrcTy = *I;
+ if (SrcTy != DstTy && TLI->isTruncateFree(SrcTy, DstTy)) {
+ Formula F = Base;
+
+ if (F.ScaledReg) F.ScaledReg = SE.getAnyExtendExpr(F.ScaledReg, *I);
+ for (SmallVectorImpl<const SCEV *>::iterator J = F.BaseRegs.begin(),
+ JE = F.BaseRegs.end(); J != JE; ++J)
+ *J = SE.getAnyExtendExpr(*J, SrcTy);
+
+ // TODO: This assumes we've done basic processing on all uses and
+ // have an idea what the register usage is.
+ if (!F.hasRegsUsedByUsesOtherThan(LUIdx, RegUses))
+ continue;
+
+ (void)InsertFormula(LU, LUIdx, F);
+ }
+ }
+}
+
+namespace {
+
+/// WorkItem - Helper class for GenerateCrossUseConstantOffsets. It's used to
+/// defer modifications so that the search phase doesn't have to worry about
+/// the data structures moving underneath it.
+struct WorkItem {
+ size_t LUIdx;
+ int64_t Imm;
+ const SCEV *OrigReg;
+
+ WorkItem(size_t LI, int64_t I, const SCEV *R)
+ : LUIdx(LI), Imm(I), OrigReg(R) {}
+
+ void print(raw_ostream &OS) const;
+ void dump() const;
+};
+
+}
+
+void WorkItem::print(raw_ostream &OS) const {
+ OS << "in formulae referencing " << *OrigReg << " in use " << LUIdx
+ << " , add offset " << Imm;
+}
+
+void WorkItem::dump() const {
+ print(errs()); errs() << '\n';
+}
+
+/// GenerateCrossUseConstantOffsets - Look for registers which are a constant
+/// distance apart and try to form reuse opportunities between them.
+void LSRInstance::GenerateCrossUseConstantOffsets() {
+ // Group the registers by their value without any added constant offset.
+ typedef std::map<int64_t, const SCEV *> ImmMapTy;
+ typedef DenseMap<const SCEV *, ImmMapTy> RegMapTy;
+ RegMapTy Map;
+ DenseMap<const SCEV *, SmallBitVector> UsedByIndicesMap;
+ SmallVector<const SCEV *, 8> Sequence;
+ for (RegUseTracker::const_iterator I = RegUses.begin(), E = RegUses.end();
+ I != E; ++I) {
+ const SCEV *Reg = *I;
+ int64_t Imm = ExtractImmediate(Reg, SE);
+ std::pair<RegMapTy::iterator, bool> Pair =
+ Map.insert(std::make_pair(Reg, ImmMapTy()));
+ if (Pair.second)
+ Sequence.push_back(Reg);
+ Pair.first->second.insert(std::make_pair(Imm, *I));
+ UsedByIndicesMap[Reg] |= RegUses.getUsedByIndices(*I);
+ }
+
+ // Now examine each set of registers with the same base value. Build up
+ // a list of work to do and do the work in a separate step so that we're
+ // not adding formulae and register counts while we're searching.
+ SmallVector<WorkItem, 32> WorkItems;
+ SmallSet<std::pair<size_t, int64_t>, 32> UniqueItems;
+ for (SmallVectorImpl<const SCEV *>::const_iterator I = Sequence.begin(),
+ E = Sequence.end(); I != E; ++I) {
+ const SCEV *Reg = *I;
+ const ImmMapTy &Imms = Map.find(Reg)->second;
+
+ // It's not worthwhile looking for reuse if there's only one offset.
+ if (Imms.size() == 1)
+ continue;
+
+ DEBUG(dbgs() << "Generating cross-use offsets for " << *Reg << ':';
+ for (ImmMapTy::const_iterator J = Imms.begin(), JE = Imms.end();
+ J != JE; ++J)
+ dbgs() << ' ' << J->first;
+ dbgs() << '\n');
+
+ // Examine each offset.
+ for (ImmMapTy::const_iterator J = Imms.begin(), JE = Imms.end();
+ J != JE; ++J) {
+ const SCEV *OrigReg = J->second;
+
+ int64_t JImm = J->first;
+ const SmallBitVector &UsedByIndices = RegUses.getUsedByIndices(OrigReg);
+
+ if (!isa<SCEVConstant>(OrigReg) &&
+ UsedByIndicesMap[Reg].count() == 1) {
+ DEBUG(dbgs() << "Skipping cross-use reuse for " << *OrigReg << '\n');
+ continue;
+ }
+
+ // Conservatively examine offsets between this orig reg a few selected
+ // other orig regs.
+ ImmMapTy::const_iterator OtherImms[] = {
+ Imms.begin(), prior(Imms.end()),
+ Imms.upper_bound((Imms.begin()->first + prior(Imms.end())->first) / 2)
+ };
+ for (size_t i = 0, e = array_lengthof(OtherImms); i != e; ++i) {
+ ImmMapTy::const_iterator M = OtherImms[i];
+ if (M == J || M == JE) continue;
+
+ // Compute the difference between the two.
+ int64_t Imm = (uint64_t)JImm - M->first;
+ for (int LUIdx = UsedByIndices.find_first(); LUIdx != -1;
+ LUIdx = UsedByIndices.find_next(LUIdx))
+ // Make a memo of this use, offset, and register tuple.
+ if (UniqueItems.insert(std::make_pair(LUIdx, Imm)))
+ WorkItems.push_back(WorkItem(LUIdx, Imm, OrigReg));
+ }
+ }
+ }
+
+ Map.clear();
+ Sequence.clear();
+ UsedByIndicesMap.clear();
+ UniqueItems.clear();
+
+ // Now iterate through the worklist and add new formulae.
+ for (SmallVectorImpl<WorkItem>::const_iterator I = WorkItems.begin(),
+ E = WorkItems.end(); I != E; ++I) {
+ const WorkItem &WI = *I;
+ size_t LUIdx = WI.LUIdx;
+ LSRUse &LU = Uses[LUIdx];
+ int64_t Imm = WI.Imm;
+ const SCEV *OrigReg = WI.OrigReg;
+
+ const Type *IntTy = SE.getEffectiveSCEVType(OrigReg->getType());
+ const SCEV *NegImmS = SE.getSCEV(ConstantInt::get(IntTy, -(uint64_t)Imm));
+ unsigned BitWidth = SE.getTypeSizeInBits(IntTy);
+
+ // TODO: Use a more targetted data structure.
+ for (size_t L = 0, LE = LU.Formulae.size(); L != LE; ++L) {
+ Formula F = LU.Formulae[L];
+ // Use the immediate in the scaled register.
+ if (F.ScaledReg == OrigReg) {
+ int64_t Offs = (uint64_t)F.AM.BaseOffs +
+ Imm * (uint64_t)F.AM.Scale;
+ // Don't create 50 + reg(-50).
+ if (F.referencesReg(SE.getSCEV(
+ ConstantInt::get(IntTy, -(uint64_t)Offs))))
+ continue;
+ Formula NewF = F;
+ NewF.AM.BaseOffs = Offs;
+ if (!isLegalUse(NewF.AM, LU.MinOffset, LU.MaxOffset,
+ LU.Kind, LU.AccessTy, TLI))
+ continue;
+ NewF.ScaledReg = SE.getAddExpr(NegImmS, NewF.ScaledReg);
+
+ // If the new scale is a constant in a register, and adding the constant
+ // value to the immediate would produce a value closer to zero than the
+ // immediate itself, then the formula isn't worthwhile.
+ if (const SCEVConstant *C = dyn_cast<SCEVConstant>(NewF.ScaledReg))
+ if (C->getValue()->getValue().isNegative() !=
+ (NewF.AM.BaseOffs < 0) &&
+ (C->getValue()->getValue().abs() * APInt(BitWidth, F.AM.Scale))
+ .ule(APInt(BitWidth, NewF.AM.BaseOffs).abs()))
+ continue;
+
+ // OK, looks good.
+ (void)InsertFormula(LU, LUIdx, NewF);
+ } else {
+ // Use the immediate in a base register.
+ for (size_t N = 0, NE = F.BaseRegs.size(); N != NE; ++N) {
+ const SCEV *BaseReg = F.BaseRegs[N];
+ if (BaseReg != OrigReg)
+ continue;
+ Formula NewF = F;
+ NewF.AM.BaseOffs = (uint64_t)NewF.AM.BaseOffs + Imm;
+ if (!isLegalUse(NewF.AM, LU.MinOffset, LU.MaxOffset,
+ LU.Kind, LU.AccessTy, TLI))
+ continue;
+ NewF.BaseRegs[N] = SE.getAddExpr(NegImmS, BaseReg);
+
+ // If the new formula has a constant in a register, and adding the
+ // constant value to the immediate would produce a value closer to
+ // zero than the immediate itself, then the formula isn't worthwhile.
+ for (SmallVectorImpl<const SCEV *>::const_iterator
+ J = NewF.BaseRegs.begin(), JE = NewF.BaseRegs.end();
+ J != JE; ++J)
+ if (const SCEVConstant *C = dyn_cast<SCEVConstant>(*J))
+ if (C->getValue()->getValue().isNegative() !=
+ (NewF.AM.BaseOffs < 0) &&
+ C->getValue()->getValue().abs()
+ .ule(APInt(BitWidth, NewF.AM.BaseOffs).abs()))
+ goto skip_formula;
+
+ // Ok, looks good.
+ (void)InsertFormula(LU, LUIdx, NewF);
+ break;
+ skip_formula:;
+ }
+ }
+ }
+ }
+}
+
+/// GenerateAllReuseFormulae - Generate formulae for each use.
+void
+LSRInstance::GenerateAllReuseFormulae() {
+ // This is split into multiple loops so that hasRegsUsedByUsesOtherThan
+ // queries are more precise.
+ for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
+ LSRUse &LU = Uses[LUIdx];
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateReassociations(LU, LUIdx, LU.Formulae[i]);
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateCombinations(LU, LUIdx, LU.Formulae[i]);
+ }
+ for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
+ LSRUse &LU = Uses[LUIdx];
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateSymbolicOffsets(LU, LUIdx, LU.Formulae[i]);
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateConstantOffsets(LU, LUIdx, LU.Formulae[i]);
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateICmpZeroScales(LU, LUIdx, LU.Formulae[i]);
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateScales(LU, LUIdx, LU.Formulae[i]);
+ }
+ for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
+ LSRUse &LU = Uses[LUIdx];
+ for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
+ GenerateTruncates(LU, LUIdx, LU.Formulae[i]);
+ }
+
+ GenerateCrossUseConstantOffsets();
+}
+
+/// If their are multiple formulae with the same set of registers used
+/// by other uses, pick the best one and delete the others.
+void LSRInstance::FilterOutUndesirableDedicatedRegisters() {
+#ifndef NDEBUG
+ bool Changed = false;
+#endif
+
+ // Collect the best formula for each unique set of shared registers. This
+ // is reset for each use.
+ typedef DenseMap<SmallVector<const SCEV *, 2>, size_t, UniquifierDenseMapInfo>
+ BestFormulaeTy;
+ BestFormulaeTy BestFormulae;
+
+ for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
+ LSRUse &LU = Uses[LUIdx];
+ FormulaSorter Sorter(L, LU, SE, DT);
+
+ // Clear out the set of used regs; it will be recomputed.
+ LU.Regs.clear();
+
+ for (size_t FIdx = 0, NumForms = LU.Formulae.size();
+ FIdx != NumForms; ++FIdx) {
+ Formula &F = LU.Formulae[FIdx];
+
+ SmallVector<const SCEV *, 2> Key;
+ for (SmallVectorImpl<const SCEV *>::const_iterator J = F.BaseRegs.begin(),
+ JE = F.BaseRegs.end(); J != JE; ++J) {
+ const SCEV *Reg = *J;
+ if (RegUses.isRegUsedByUsesOtherThan(Reg, LUIdx))
+ Key.push_back(Reg);
+ }
+ if (F.ScaledReg &&
+ RegUses.isRegUsedByUsesOtherThan(F.ScaledReg, LUIdx))
+ Key.push_back(F.ScaledReg);
+ // Unstable sort by host order ok, because this is only used for
+ // uniquifying.
+ std::sort(Key.begin(), Key.end());
+
+ std::pair<BestFormulaeTy::const_iterator, bool> P =
+ BestFormulae.insert(std::make_pair(Key, FIdx));
+ if (!P.second) {
+ Formula &Best = LU.Formulae[P.first->second];
+ if (Sorter.operator()(F, Best))
+ std::swap(F, Best);
+ DEBUG(dbgs() << "Filtering out "; F.print(dbgs());
+ dbgs() << "\n"
+ " in favor of "; Best.print(dbgs());
+ dbgs() << '\n');
+#ifndef NDEBUG
+ Changed = true;
+#endif
+ std::swap(F, LU.Formulae.back());
+ LU.Formulae.pop_back();
+ --FIdx;
+ --NumForms;
+ continue;
+ }
+ if (F.ScaledReg) LU.Regs.insert(F.ScaledReg);
+ LU.Regs.insert(F.BaseRegs.begin(), F.BaseRegs.end());
+ }
+ BestFormulae.clear();
+ }
+
+ DEBUG(if (Changed) {
+ dbgs() << "\n"
+ "After filtering out undesirable candidates:\n";
+ print_uses(dbgs());
+ });
+}
+
+/// NarrowSearchSpaceUsingHeuristics - If there are an extrordinary number of
+/// formulae to choose from, use some rough heuristics to prune down the number
+/// of formulae. This keeps the main solver from taking an extrordinary amount
+/// of time in some worst-case scenarios.
+void LSRInstance::NarrowSearchSpaceUsingHeuristics() {
+ // This is a rough guess that seems to work fairly well.
+ const size_t Limit = UINT16_MAX;
+
+ SmallPtrSet<const SCEV *, 4> Taken;
+ for (;;) {
+ // Estimate the worst-case number of solutions we might consider. We almost
+ // never consider this many solutions because we prune the search space,
+ // but the pruning isn't always sufficient.
+ uint32_t Power = 1;
+ for (SmallVectorImpl<LSRUse>::const_iterator I = Uses.begin(),
+ E = Uses.end(); I != E; ++I) {
+ size_t FSize = I->Formulae.size();
+ if (FSize >= Limit) {
+ Power = Limit;
+ break;
+ }
+ Power *= FSize;
+ if (Power >= Limit)
+ break;
+ }
+ if (Power < Limit)
+ break;
+
+ // Ok, we have too many of formulae on our hands to conveniently handle.
+ // Use a rough heuristic to thin out the list.
+
+ // Pick the register which is used by the most LSRUses, which is likely
+ // to be a good reuse register candidate.
+ const SCEV *Best = 0;
+ unsigned BestNum = 0;
+ for (RegUseTracker::const_iterator I = RegUses.begin(), E = RegUses.end();
+ I != E; ++I) {
+ const SCEV *Reg = *I;
+ if (Taken.count(Reg))
+ continue;
+ if (!Best)
+ Best = Reg;
+ else {
+ unsigned Count = RegUses.getUsedByIndices(Reg).count();
+ if (Count > BestNum) {
+ Best = Reg;
+ BestNum = Count;
+ }
+ }
+ }
+
+ DEBUG(dbgs() << "Narrowing the search space by assuming " << *Best
+ << " will yeild profitable reuse.\n");
+ Taken.insert(Best);
+
+ // In any use with formulae which references this register, delete formulae
+ // which don't reference it.
+ for (SmallVectorImpl<LSRUse>::iterator I = Uses.begin(),
+ E = Uses.end(); I != E; ++I) {
+ LSRUse &LU = *I;
+ if (!LU.Regs.count(Best)) continue;
+
+ // Clear out the set of used regs; it will be recomputed.
+ LU.Regs.clear();
+
+ for (size_t i = 0, e = LU.Formulae.size(); i != e; ++i) {
+ Formula &F = LU.Formulae[i];
+ if (!F.referencesReg(Best)) {
+ DEBUG(dbgs() << " Deleting "; F.print(dbgs()); dbgs() << '\n');
+ std::swap(LU.Formulae.back(), F);
+ LU.Formulae.pop_back();
+ --e;
+ --i;
+ continue;
+ }
+
+ if (F.ScaledReg) LU.Regs.insert(F.ScaledReg);
+ LU.Regs.insert(F.BaseRegs.begin(), F.BaseRegs.end());
+ }
+ }
+
+ DEBUG(dbgs() << "After pre-selection:\n";
+ print_uses(dbgs()));
+ }
+}
+
+/// SolveRecurse - This is the recursive solver.
+void LSRInstance::SolveRecurse(SmallVectorImpl<const Formula *> &Solution,
+ Cost &SolutionCost,
+ SmallVectorImpl<const Formula *> &Workspace,
+ const Cost &CurCost,
+ const SmallPtrSet<const SCEV *, 16> &CurRegs,
+ DenseSet<const SCEV *> &VisitedRegs) const {
+ // Some ideas:
+ // - prune more:
+ // - use more aggressive filtering
+ // - sort the formula so that the most profitable solutions are found first
+ // - sort the uses too
+ // - search faster:
+ // - dont compute a cost, and then compare. compare while computing a cost
+ // and bail early.
+ // - track register sets with SmallBitVector
+
+ const LSRUse &LU = Uses[Workspace.size()];
+
+ // If this use references any register that's already a part of the
+ // in-progress solution, consider it a requirement that a formula must
+ // reference that register in order to be considered. This prunes out
+ // unprofitable searching.
+ SmallSetVector<const SCEV *, 4> ReqRegs;
+ for (SmallPtrSet<const SCEV *, 16>::const_iterator I = CurRegs.begin(),
+ E = CurRegs.end(); I != E; ++I)
+ if (LU.Regs.count(*I))
+ ReqRegs.insert(*I);
+
+ bool AnySatisfiedReqRegs = false;
+ SmallPtrSet<const SCEV *, 16> NewRegs;
+ Cost NewCost;
+retry:
+ for (SmallVectorImpl<Formula>::const_iterator I = LU.Formulae.begin(),
+ E = LU.Formulae.end(); I != E; ++I) {
+ const Formula &F = *I;
+
+ // Ignore formulae which do not use any of the required registers.
+ for (SmallSetVector<const SCEV *, 4>::const_iterator J = ReqRegs.begin(),
+ JE = ReqRegs.end(); J != JE; ++J) {
+ const SCEV *Reg = *J;
+ if ((!F.ScaledReg || F.ScaledReg != Reg) &&
+ std::find(F.BaseRegs.begin(), F.BaseRegs.end(), Reg) ==
+ F.BaseRegs.end())
+ goto skip;
+ }
+ AnySatisfiedReqRegs = true;
+
+ // Evaluate the cost of the current formula. If it's already worse than
+ // the current best, prune the search at that point.
+ NewCost = CurCost;
+ NewRegs = CurRegs;
+ NewCost.RateFormula(F, NewRegs, VisitedRegs, L, LU.Offsets, SE, DT);
+ if (NewCost < SolutionCost) {
+ Workspace.push_back(&F);
+ if (Workspace.size() != Uses.size()) {
+ SolveRecurse(Solution, SolutionCost, Workspace, NewCost,
+ NewRegs, VisitedRegs);
+ if (F.getNumRegs() == 1 && Workspace.size() == 1)
+ VisitedRegs.insert(F.ScaledReg ? F.ScaledReg : F.BaseRegs[0]);
+ } else {
+ DEBUG(dbgs() << "New best at "; NewCost.print(dbgs());
+ dbgs() << ". Regs:";
+ for (SmallPtrSet<const SCEV *, 16>::const_iterator
+ I = NewRegs.begin(), E = NewRegs.end(); I != E; ++I)
+ dbgs() << ' ' << **I;
+ dbgs() << '\n');
+
+ SolutionCost = NewCost;
+ Solution = Workspace;
+ }
+ Workspace.pop_back();
+ }
+ skip:;
+ }
+
+ // If none of the formulae had all of the required registers, relax the
+ // constraint so that we don't exclude all formulae.
+ if (!AnySatisfiedReqRegs) {
+ ReqRegs.clear();
+ goto retry;
+ }
+}
+
+void LSRInstance::Solve(SmallVectorImpl<const Formula *> &Solution) const {
+ SmallVector<const Formula *, 8> Workspace;
+ Cost SolutionCost;
+ SolutionCost.Loose();
+ Cost CurCost;
+ SmallPtrSet<const SCEV *, 16> CurRegs;
+ DenseSet<const SCEV *> VisitedRegs;
+ Workspace.reserve(Uses.size());
+
+ SolveRecurse(Solution, SolutionCost, Workspace, CurCost,
+ CurRegs, VisitedRegs);
+
+ // Ok, we've now made all our decisions.
+ DEBUG(dbgs() << "\n"
+ "The chosen solution requires "; SolutionCost.print(dbgs());
+ dbgs() << ":\n";
+ for (size_t i = 0, e = Uses.size(); i != e; ++i) {
+ dbgs() << " ";
+ Uses[i].print(dbgs());
+ dbgs() << "\n"
+ " ";
+ Solution[i]->print(dbgs());
+ dbgs() << '\n';
+ });
+}
+
+/// getImmediateDominator - A handy utility for the specific DominatorTree
+/// query that we need here.
+///
+static BasicBlock *getImmediateDominator(BasicBlock *BB, DominatorTree &DT) {
+ DomTreeNode *Node = DT.getNode(BB);
+ if (!Node) return 0;
+ Node = Node->getIDom();
+ if (!Node) return 0;
+ return Node->getBlock();
+}
+
+Value *LSRInstance::Expand(const LSRFixup &LF,
+ const Formula &F,
+ BasicBlock::iterator IP,
+ SCEVExpander &Rewriter,
+ SmallVectorImpl<WeakVH> &DeadInsts) const {
+ const LSRUse &LU = Uses[LF.LUIdx];
+
+ // Then, collect some instructions which we will remain dominated by when
+ // expanding the replacement. These must be dominated by any operands that
+ // will be required in the expansion.
+ SmallVector<Instruction *, 4> Inputs;
+ if (Instruction *I = dyn_cast<Instruction>(LF.OperandValToReplace))
+ Inputs.push_back(I);
+ if (LU.Kind == LSRUse::ICmpZero)
+ if (Instruction *I =
+ dyn_cast<Instruction>(cast<ICmpInst>(LF.UserInst)->getOperand(1)))
+ Inputs.push_back(I);
+ if (LF.PostIncLoop && !L->contains(LF.UserInst))
+ Inputs.push_back(L->getLoopLatch()->getTerminator());
+
+ // Then, climb up the immediate dominator tree as far as we can go while
+ // still being dominated by the input positions.
+ for (;;) {
+ bool AllDominate = true;
+ Instruction *BetterPos = 0;
+ BasicBlock *IDom = getImmediateDominator(IP->getParent(), DT);
+ if (!IDom) break;
+ Instruction *Tentative = IDom->getTerminator();
+ for (SmallVectorImpl<Instruction *>::const_iterator I = Inputs.begin(),
+ E = Inputs.end(); I != E; ++I) {
+ Instruction *Inst = *I;
+ if (Inst == Tentative || !DT.dominates(Inst, Tentative)) {
+ AllDominate = false;
+ break;
+ }
+ if (IDom == Inst->getParent() &&
+ (!BetterPos || DT.dominates(BetterPos, Inst)))
+ BetterPos = next(BasicBlock::iterator(Inst));
+ }
+ if (!AllDominate)
+ break;
+ if (BetterPos)
+ IP = BetterPos;
+ else
+ IP = Tentative;
+ }
+ while (isa<PHINode>(IP)) ++IP;
+
+ // Inform the Rewriter if we have a post-increment use, so that it can
+ // perform an advantageous expansion.
+ Rewriter.setPostInc(LF.PostIncLoop);
+
+ // This is the type that the user actually needs.
+ const Type *OpTy = LF.OperandValToReplace->getType();
+ // This will be the type that we'll initially expand to.
+ const Type *Ty = F.getType();
+ if (!Ty)
+ // No type known; just expand directly to the ultimate type.
+ Ty = OpTy;
+ else if (SE.getEffectiveSCEVType(Ty) == SE.getEffectiveSCEVType(OpTy))
+ // Expand directly to the ultimate type if it's the right size.
+ Ty = OpTy;
+ // This is the type to do integer arithmetic in.
+ const Type *IntTy = SE.getEffectiveSCEVType(Ty);
+
+ // Build up a list of operands to add together to form the full base.
+ SmallVector<const SCEV *, 8> Ops;
+
+ // Expand the BaseRegs portion.
+ for (SmallVectorImpl<const SCEV *>::const_iterator I = F.BaseRegs.begin(),
+ E = F.BaseRegs.end(); I != E; ++I) {
+ const SCEV *Reg = *I;
+ assert(!Reg->isZero() && "Zero allocated in a base register!");
+
+ // If we're expanding for a post-inc user for the add-rec's loop, make the
+ // post-inc adjustment.
+ const SCEV *Start = Reg;
+ while (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(Start)) {
+ if (AR->getLoop() == LF.PostIncLoop) {
+ Reg = SE.getAddExpr(Reg, AR->getStepRecurrence(SE));
+ // If the user is inside the loop, insert the code after the increment
+ // so that it is dominated by its operand. If the original insert point
+ // was already dominated by the increment, keep it, because there may
+ // be loop-variant operands that need to be respected also.
+ if (L->contains(LF.UserInst) && !DT.dominates(IVIncInsertPos, IP))
+ IP = IVIncInsertPos;
+ break;
+ }
+ Start = AR->getStart();
+ }
+
+ Ops.push_back(SE.getUnknown(Rewriter.expandCodeFor(Reg, 0, IP)));
+ }
+
+ // Expand the ScaledReg portion.
+ Value *ICmpScaledV = 0;
+ if (F.AM.Scale != 0) {
+ const SCEV *ScaledS = F.ScaledReg;
+
+ // If we're expanding for a post-inc user for the add-rec's loop, make the
+ // post-inc adjustment.
+ if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(ScaledS))
+ if (AR->getLoop() == LF.PostIncLoop)
+ ScaledS = SE.getAddExpr(ScaledS, AR->getStepRecurrence(SE));
+
+ if (LU.Kind == LSRUse::ICmpZero) {
+ // An interesting way of "folding" with an icmp is to use a negated
+ // scale, which we'll implement by inserting it into the other operand
+ // of the icmp.
+ assert(F.AM.Scale == -1 &&
+ "The only scale supported by ICmpZero uses is -1!");
+ ICmpScaledV = Rewriter.expandCodeFor(ScaledS, 0, IP);
+ } else {
+ // Otherwise just expand the scaled register and an explicit scale,
+ // which is expected to be matched as part of the address.
+ ScaledS = SE.getUnknown(Rewriter.expandCodeFor(ScaledS, 0, IP));
+ ScaledS = SE.getMulExpr(ScaledS,
+ SE.getIntegerSCEV(F.AM.Scale,
+ ScaledS->getType()));
+ Ops.push_back(ScaledS);
+ }
+ }
+
+ // Expand the immediate portions.
+ if (F.AM.BaseGV)
+ Ops.push_back(SE.getSCEV(F.AM.BaseGV));
+ int64_t Offset = (uint64_t)F.AM.BaseOffs + LF.Offset;
+ if (Offset != 0) {
+ if (LU.Kind == LSRUse::ICmpZero) {
+ // The other interesting way of "folding" with an ICmpZero is to use a
+ // negated immediate.
+ if (!ICmpScaledV)
+ ICmpScaledV = ConstantInt::get(IntTy, -Offset);
+ else {
+ Ops.push_back(SE.getUnknown(ICmpScaledV));
+ ICmpScaledV = ConstantInt::get(IntTy, Offset);
+ }
+ } else {
+ // Just add the immediate values. These again are expected to be matched
+ // as part of the address.
+ Ops.push_back(SE.getIntegerSCEV(Offset, IntTy));
+ }
+ }
+
+ // Emit instructions summing all the operands.
+ const SCEV *FullS = Ops.empty() ?
+ SE.getIntegerSCEV(0, IntTy) :
+ SE.getAddExpr(Ops);
+ Value *FullV = Rewriter.expandCodeFor(FullS, Ty, IP);
+
+ // We're done expanding now, so reset the rewriter.
+ Rewriter.setPostInc(0);
+
+ // An ICmpZero Formula represents an ICmp which we're handling as a
+ // comparison against zero. Now that we've expanded an expression for that
+ // form, update the ICmp's other operand.
+ if (LU.Kind == LSRUse::ICmpZero) {
+ ICmpInst *CI = cast<ICmpInst>(LF.UserInst);
+ DeadInsts.push_back(CI->getOperand(1));
+ assert(!F.AM.BaseGV && "ICmp does not support folding a global value and "
+ "a scale at the same time!");
+ if (F.AM.Scale == -1) {
+ if (ICmpScaledV->getType() != OpTy) {
+ Instruction *Cast =
+ CastInst::Create(CastInst::getCastOpcode(ICmpScaledV, false,
+ OpTy, false),
+ ICmpScaledV, OpTy, "tmp", CI);
+ ICmpScaledV = Cast;
+ }
+ CI->setOperand(1, ICmpScaledV);
+ } else {
+ assert(F.AM.Scale == 0 &&
+ "ICmp does not support folding a global value and "
+ "a scale at the same time!");
+ Constant *C = ConstantInt::getSigned(SE.getEffectiveSCEVType(OpTy),
+ -(uint64_t)Offset);
+ if (C->getType() != OpTy)
+ C = ConstantExpr::getCast(CastInst::getCastOpcode(C, false,
+ OpTy, false),
+ C, OpTy);
+
+ CI->setOperand(1, C);
+ }
+ }
+
+ return FullV;
+}
+
+/// RewriteForPHI - Helper for Rewrite. PHI nodes are special because the use
+/// of their operands effectively happens in their predecessor blocks, so the
+/// expression may need to be expanded in multiple places.
+void LSRInstance::RewriteForPHI(PHINode *PN,
+ const LSRFixup &LF,
+ const Formula &F,
+ SCEVExpander &Rewriter,
+ SmallVectorImpl<WeakVH> &DeadInsts,
+ Pass *P) const {
+ DenseMap<BasicBlock *, Value *> Inserted;
+ for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
+ if (PN->getIncomingValue(i) == LF.OperandValToReplace) {
+ BasicBlock *BB = PN->getIncomingBlock(i);
+
+ // If this is a critical edge, split the edge so that we do not insert
+ // the code on all predecessor/successor paths. We do this unless this
+ // is the canonical backedge for this loop, which complicates post-inc
+ // users.
+ if (e != 1 && BB->getTerminator()->getNumSuccessors() > 1 &&
+ !isa<IndirectBrInst>(BB->getTerminator()) &&
+ (PN->getParent() != L->getHeader() || !L->contains(BB))) {
+ // Split the critical edge.
+ BasicBlock *NewBB = SplitCriticalEdge(BB, PN->getParent(), P);
+
+ // If PN is outside of the loop and BB is in the loop, we want to
+ // move the block to be immediately before the PHI block, not
+ // immediately after BB.
+ if (L->contains(BB) && !L->contains(PN))
+ NewBB->moveBefore(PN->getParent());
+
+ // Splitting the edge can reduce the number of PHI entries we have.
+ e = PN->getNumIncomingValues();
+ BB = NewBB;
+ i = PN->getBasicBlockIndex(BB);
+ }
+
+ std::pair<DenseMap<BasicBlock *, Value *>::iterator, bool> Pair =
+ Inserted.insert(std::make_pair(BB, static_cast<Value *>(0)));
+ if (!Pair.second)
+ PN->setIncomingValue(i, Pair.first->second);
+ else {
+ Value *FullV = Expand(LF, F, BB->getTerminator(), Rewriter, DeadInsts);
+
+ // If this is reuse-by-noop-cast, insert the noop cast.
+ const Type *OpTy = LF.OperandValToReplace->getType();
+ if (FullV->getType() != OpTy)
+ FullV =
+ CastInst::Create(CastInst::getCastOpcode(FullV, false,
+ OpTy, false),
+ FullV, LF.OperandValToReplace->getType(),
+ "tmp", BB->getTerminator());
+
+ PN->setIncomingValue(i, FullV);
+ Pair.first->second = FullV;
+ }
+ }
+}
+
+/// Rewrite - Emit instructions for the leading candidate expression for this
+/// LSRUse (this is called "expanding"), and update the UserInst to reference
+/// the newly expanded value.
+void LSRInstance::Rewrite(const LSRFixup &LF,
+ const Formula &F,
+ SCEVExpander &Rewriter,
+ SmallVectorImpl<WeakVH> &DeadInsts,
+ Pass *P) const {
+ // First, find an insertion point that dominates UserInst. For PHI nodes,
+ // find the nearest block which dominates all the relevant uses.
+ if (PHINode *PN = dyn_cast<PHINode>(LF.UserInst)) {
+ RewriteForPHI(PN, LF, F, Rewriter, DeadInsts, P);
+ } else {
+ Value *FullV = Expand(LF, F, LF.UserInst, Rewriter, DeadInsts);
+
+ // If this is reuse-by-noop-cast, insert the noop cast.
+ const Type *OpTy = LF.OperandValToReplace->getType();
+ if (FullV->getType() != OpTy) {
+ Instruction *Cast =
+ CastInst::Create(CastInst::getCastOpcode(FullV, false, OpTy, false),
+ FullV, OpTy, "tmp", LF.UserInst);
+ FullV = Cast;
+ }
+
+ // Update the user. ICmpZero is handled specially here (for now) because
+ // Expand may have updated one of the operands of the icmp already, and
+ // its new value may happen to be equal to LF.OperandValToReplace, in
+ // which case doing replaceUsesOfWith leads to replacing both operands
+ // with the same value. TODO: Reorganize this.
+ if (Uses[LF.LUIdx].Kind == LSRUse::ICmpZero)
+ LF.UserInst->setOperand(0, FullV);
+ else
+ LF.UserInst->replaceUsesOfWith(LF.OperandValToReplace, FullV);
+ }
+
+ DeadInsts.push_back(LF.OperandValToReplace);
+}
+
+void
+LSRInstance::ImplementSolution(const SmallVectorImpl<const Formula *> &Solution,
+ Pass *P) {
+ // Keep track of instructions we may have made dead, so that
+ // we can remove them after we are done working.
+ SmallVector<WeakVH, 16> DeadInsts;
+
+ SCEVExpander Rewriter(SE);
+ Rewriter.disableCanonicalMode();
+ Rewriter.setIVIncInsertPos(L, IVIncInsertPos);
+
+ // Expand the new value definitions and update the users.
+ for (size_t i = 0, e = Fixups.size(); i != e; ++i) {
+ size_t LUIdx = Fixups[i].LUIdx;
+
+ Rewrite(Fixups[i], *Solution[LUIdx], Rewriter, DeadInsts, P);
+
+ Changed = true;
+ }