+ * Processes a read or rmw model action.
+ * @param curr is the read model action to process.
+ * @param second_part_of_rmw is boolean that is true is this is the second action of a rmw.
+ * @return True if processing this read updates the mo_graph.
+ */
+bool ModelChecker::process_read(ModelAction *curr, bool second_part_of_rmw)
+{
+ uint64_t value = VALUE_NONE;
+ bool updated = false;
+ while (true) {
+ const ModelAction *reads_from = curr->get_node()->get_read_from();
+ if (reads_from != NULL) {
+ mo_graph->startChanges();
+
+ value = reads_from->get_value();
+ bool r_status = false;
+
+ if (!second_part_of_rmw) {
+ check_recency(curr, reads_from);
+ r_status = r_modification_order(curr, reads_from);
+ }
+
+
+ if (!second_part_of_rmw && is_infeasible() && (curr->get_node()->increment_read_from() || curr->get_node()->increment_future_value())) {
+ mo_graph->rollbackChanges();
+ priv->too_many_reads = false;
+ continue;
+ }
+
+ read_from(curr, reads_from);
+ mo_graph->commitChanges();
+ mo_check_promises(curr->get_tid(), reads_from);
+
+ updated |= r_status;
+ } else if (!second_part_of_rmw) {
+ /* Read from future value */
+ value = curr->get_node()->get_future_value();
+ modelclock_t expiration = curr->get_node()->get_future_value_expiration();
+ curr->set_read_from(NULL);
+ Promise *valuepromise = new Promise(curr, value, expiration);
+ promises->push_back(valuepromise);
+ }
+ get_thread(curr)->set_return_value(value);
+ return updated;
+ }
+}
+
+/**
+ * Processes a lock, trylock, or unlock model action. @param curr is
+ * the read model action to process.
+ *
+ * The try lock operation checks whether the lock is taken. If not,
+ * it falls to the normal lock operation case. If so, it returns
+ * fail.
+ *
+ * The lock operation has already been checked that it is enabled, so
+ * it just grabs the lock and synchronizes with the previous unlock.
+ *
+ * The unlock operation has to re-enable all of the threads that are
+ * waiting on the lock.
+ *
+ * @return True if synchronization was updated; false otherwise
+ */
+bool ModelChecker::process_mutex(ModelAction *curr)
+{
+ std::mutex *mutex = NULL;
+ struct std::mutex_state *state = NULL;
+
+ if (curr->is_trylock() || curr->is_lock() || curr->is_unlock()) {
+ mutex = (std::mutex *)curr->get_location();
+ state = mutex->get_state();
+ } else if (curr->is_wait()) {
+ mutex = (std::mutex *)curr->get_value();
+ state = mutex->get_state();
+ }
+
+ switch (curr->get_type()) {
+ case ATOMIC_TRYLOCK: {
+ bool success = !state->islocked;
+ curr->set_try_lock(success);
+ if (!success) {
+ get_thread(curr)->set_return_value(0);
+ break;
+ }
+ get_thread(curr)->set_return_value(1);
+ }
+ //otherwise fall into the lock case
+ case ATOMIC_LOCK: {
+ if (curr->get_cv()->getClock(state->alloc_tid) <= state->alloc_clock)
+ assert_bug("Lock access before initialization");
+ state->islocked = true;
+ ModelAction *unlock = get_last_unlock(curr);
+ //synchronize with the previous unlock statement
+ if (unlock != NULL) {
+ curr->synchronize_with(unlock);
+ return true;
+ }
+ break;
+ }
+ case ATOMIC_UNLOCK: {
+ //unlock the lock
+ state->islocked = false;
+ //wake up the other threads
+ action_list_t *waiters = get_safe_ptr_action(lock_waiters_map, curr->get_location());
+ //activate all the waiting threads
+ for (action_list_t::iterator rit = waiters->begin(); rit != waiters->end(); rit++) {
+ scheduler->wake(get_thread(*rit));
+ }
+ waiters->clear();
+ break;
+ }
+ case ATOMIC_WAIT: {
+ //unlock the lock
+ state->islocked = false;
+ //wake up the other threads
+ action_list_t *waiters = get_safe_ptr_action(lock_waiters_map, (void *) curr->get_value());
+ //activate all the waiting threads
+ for (action_list_t::iterator rit = waiters->begin(); rit != waiters->end(); rit++) {
+ scheduler->wake(get_thread(*rit));
+ }
+ waiters->clear();
+ //check whether we should go to sleep or not...simulate spurious failures
+ if (curr->get_node()->get_misc() == 0) {
+ get_safe_ptr_action(condvar_waiters_map, curr->get_location())->push_back(curr);
+ //disable us
+ scheduler->sleep(get_current_thread());
+ }
+ break;
+ }
+ case ATOMIC_NOTIFY_ALL: {
+ action_list_t *waiters = get_safe_ptr_action(condvar_waiters_map, curr->get_location());
+ //activate all the waiting threads
+ for (action_list_t::iterator rit = waiters->begin(); rit != waiters->end(); rit++) {
+ scheduler->wake(get_thread(*rit));
+ }
+ waiters->clear();
+ break;
+ }
+ case ATOMIC_NOTIFY_ONE: {
+ action_list_t *waiters = get_safe_ptr_action(condvar_waiters_map, curr->get_location());
+ int wakeupthread = curr->get_node()->get_misc();
+ action_list_t::iterator it = waiters->begin();
+ advance(it, wakeupthread);
+ scheduler->wake(get_thread(*it));
+ waiters->erase(it);
+ break;
+ }
+
+ default:
+ ASSERT(0);
+ }
+ return false;
+}
+
+/**
+ * Process a write ModelAction
+ * @param curr The ModelAction to process
+ * @return True if the mo_graph was updated or promises were resolved
+ */
+bool ModelChecker::process_write(ModelAction *curr)
+{
+ bool updated_mod_order = w_modification_order(curr);
+ bool updated_promises = resolve_promises(curr);
+
+ if (promises->size() == 0) {
+ for (unsigned int i = 0; i < futurevalues->size(); i++) {
+ struct PendingFutureValue pfv = (*futurevalues)[i];
+ //Do more ambitious checks now that mo is more complete
+ if (mo_may_allow(pfv.writer, pfv.act) &&
+ pfv.act->get_node()->add_future_value(pfv.writer->get_value(), pfv.writer->get_seq_number() + params.maxfuturedelay))
+ set_latest_backtrack(pfv.act);
+ }
+ futurevalues->resize(0);
+ }
+
+ mo_graph->commitChanges();
+ mo_check_promises(curr->get_tid(), curr);
+
+ get_thread(curr)->set_return_value(VALUE_NONE);
+ return updated_mod_order || updated_promises;
+}
+
+/**
+ * Process a fence ModelAction
+ * @param curr The ModelAction to process
+ * @return True if synchronization was updated
+ */
+bool ModelChecker::process_fence(ModelAction *curr)
+{
+ /*
+ * fence-relaxed: no-op
+ * fence-release: only log the occurence (not in this function), for
+ * use in later synchronization
+ * fence-acquire (this function): search for hypothetical release
+ * sequences
+ */
+ bool updated = false;
+ if (curr->is_acquire()) {
+ action_list_t *list = action_trace;
+ action_list_t::reverse_iterator rit;
+ /* Find X : is_read(X) && X --sb-> curr */
+ for (rit = list->rbegin(); rit != list->rend(); rit++) {
+ ModelAction *act = *rit;
+ if (act == curr)
+ continue;
+ if (act->get_tid() != curr->get_tid())
+ continue;
+ /* Stop at the beginning of the thread */
+ if (act->is_thread_start())
+ break;
+ /* Stop once we reach a prior fence-acquire */
+ if (act->is_fence() && act->is_acquire())
+ break;
+ if (!act->is_read())
+ continue;
+ /* read-acquire will find its own release sequences */
+ if (act->is_acquire())
+ continue;
+
+ /* Establish hypothetical release sequences */
+ rel_heads_list_t release_heads;
+ get_release_seq_heads(curr, act, &release_heads);
+ for (unsigned int i = 0; i < release_heads.size(); i++)
+ if (!curr->synchronize_with(release_heads[i]))
+ set_bad_synchronization();
+ if (release_heads.size() != 0)
+ updated = true;
+ }
+ }
+ return updated;
+}
+
+/**
+ * @brief Process the current action for thread-related activity
+ *
+ * Performs current-action processing for a THREAD_* ModelAction. Proccesses
+ * may include setting Thread status, completing THREAD_FINISH/THREAD_JOIN
+ * synchronization, etc. This function is a no-op for non-THREAD actions
+ * (e.g., ATOMIC_{READ,WRITE,RMW,LOCK}, etc.)
+ *
+ * @param curr The current action
+ * @return True if synchronization was updated or a thread completed
+ */
+bool ModelChecker::process_thread_action(ModelAction *curr)
+{
+ bool updated = false;
+
+ switch (curr->get_type()) {
+ case THREAD_CREATE: {
+ Thread *th = (Thread *)curr->get_location();
+ th->set_creation(curr);
+ break;
+ }
+ case THREAD_JOIN: {
+ Thread *blocking = (Thread *)curr->get_location();
+ ModelAction *act = get_last_action(blocking->get_id());
+ curr->synchronize_with(act);
+ updated = true; /* trigger rel-seq checks */
+ break;
+ }
+ case THREAD_FINISH: {
+ Thread *th = get_thread(curr);
+ while (!th->wait_list_empty()) {
+ ModelAction *act = th->pop_wait_list();
+ scheduler->wake(get_thread(act));
+ }
+ th->complete();
+ updated = true; /* trigger rel-seq checks */
+ break;
+ }
+ case THREAD_START: {
+ check_promises(curr->get_tid(), NULL, curr->get_cv());
+ break;
+ }
+ default:
+ break;
+ }
+
+ return updated;
+}
+
+/**
+ * @brief Process the current action for release sequence fixup activity
+ *
+ * Performs model-checker release sequence fixups for the current action,
+ * forcing a single pending release sequence to break (with a given, potential
+ * "loose" write) or to complete (i.e., synchronize). If a pending release
+ * sequence forms a complete release sequence, then we must perform the fixup
+ * synchronization, mo_graph additions, etc.
+ *
+ * @param curr The current action; must be a release sequence fixup action
+ * @param work_queue The work queue to which to add work items as they are
+ * generated
+ */
+void ModelChecker::process_relseq_fixup(ModelAction *curr, work_queue_t *work_queue)
+{
+ const ModelAction *write = curr->get_node()->get_relseq_break();
+ struct release_seq *sequence = pending_rel_seqs->back();
+ pending_rel_seqs->pop_back();
+ ASSERT(sequence);
+ ModelAction *acquire = sequence->acquire;
+ const ModelAction *rf = sequence->rf;
+ const ModelAction *release = sequence->release;
+ ASSERT(acquire);
+ ASSERT(release);
+ ASSERT(rf);
+ ASSERT(release->same_thread(rf));
+
+ if (write == NULL) {
+ /**
+ * @todo Forcing a synchronization requires that we set
+ * modification order constraints. For instance, we can't allow
+ * a fixup sequence in which two separate read-acquire
+ * operations read from the same sequence, where the first one
+ * synchronizes and the other doesn't. Essentially, we can't
+ * allow any writes to insert themselves between 'release' and
+ * 'rf'
+ */
+
+ /* Must synchronize */
+ if (!acquire->synchronize_with(release)) {
+ set_bad_synchronization();
+ return;
+ }
+ /* Re-check all pending release sequences */
+ work_queue->push_back(CheckRelSeqWorkEntry(NULL));
+ /* Re-check act for mo_graph edges */
+ work_queue->push_back(MOEdgeWorkEntry(acquire));
+
+ /* propagate synchronization to later actions */
+ action_list_t::reverse_iterator rit = action_trace->rbegin();
+ for (; (*rit) != acquire; rit++) {
+ ModelAction *propagate = *rit;
+ if (acquire->happens_before(propagate)) {
+ propagate->synchronize_with(acquire);
+ /* Re-check 'propagate' for mo_graph edges */
+ work_queue->push_back(MOEdgeWorkEntry(propagate));
+ }
+ }
+ } else {
+ /* Break release sequence with new edges:
+ * release --mo--> write --mo--> rf */
+ mo_graph->addEdge(release, write);
+ mo_graph->addEdge(write, rf);
+ }
+
+ /* See if we have realized a data race */
+ checkDataRaces();
+}
+
+/**
+ * Initialize the current action by performing one or more of the following
+ * actions, as appropriate: merging RMWR and RMWC/RMW actions, stepping forward
+ * in the NodeStack, manipulating backtracking sets, allocating and
+ * initializing clock vectors, and computing the promises to fulfill.
+ *
+ * @param curr The current action, as passed from the user context; may be
+ * freed/invalidated after the execution of this function, with a different
+ * action "returned" its place (pass-by-reference)
+ * @return True if curr is a newly-explored action; false otherwise
+ */
+bool ModelChecker::initialize_curr_action(ModelAction **curr)
+{
+ ModelAction *newcurr;
+
+ if ((*curr)->is_rmwc() || (*curr)->is_rmw()) {
+ newcurr = process_rmw(*curr);
+ delete *curr;
+
+ if (newcurr->is_rmw())
+ compute_promises(newcurr);
+
+ *curr = newcurr;
+ return false;
+ }
+
+ (*curr)->set_seq_number(get_next_seq_num());
+
+ newcurr = node_stack->explore_action(*curr, scheduler->get_enabled_array());
+ if (newcurr) {
+ /* First restore type and order in case of RMW operation */
+ if ((*curr)->is_rmwr())
+ newcurr->copy_typeandorder(*curr);
+
+ ASSERT((*curr)->get_location() == newcurr->get_location());
+ newcurr->copy_from_new(*curr);
+
+ /* Discard duplicate ModelAction; use action from NodeStack */
+ delete *curr;
+
+ /* Always compute new clock vector */
+ newcurr->create_cv(get_parent_action(newcurr->get_tid()));
+
+ *curr = newcurr;
+ return false; /* Action was explored previously */
+ } else {
+ newcurr = *curr;
+
+ /* Always compute new clock vector */
+ newcurr->create_cv(get_parent_action(newcurr->get_tid()));
+
+ /* Assign most recent release fence */
+ newcurr->set_last_fence_release(get_last_fence_release(newcurr->get_tid()));
+
+ /*
+ * Perform one-time actions when pushing new ModelAction onto
+ * NodeStack
+ */
+ if (newcurr->is_write())
+ compute_promises(newcurr);
+ else if (newcurr->is_relseq_fixup())
+ compute_relseq_breakwrites(newcurr);
+ else if (newcurr->is_wait())
+ newcurr->get_node()->set_misc_max(2);
+ else if (newcurr->is_notify_one()) {
+ newcurr->get_node()->set_misc_max(get_safe_ptr_action(condvar_waiters_map, newcurr->get_location())->size());
+ }
+ return true; /* This was a new ModelAction */
+ }
+}
+
+/**
+ * @brief Establish reads-from relation between two actions
+ *
+ * Perform basic operations involved with establishing a concrete rf relation,
+ * including setting the ModelAction data and checking for release sequences.
+ *
+ * @param act The action that is reading (must be a read)
+ * @param rf The action from which we are reading (must be a write)
+ *
+ * @return True if this read established synchronization
+ */
+bool ModelChecker::read_from(ModelAction *act, const ModelAction *rf)
+{
+ act->set_read_from(rf);
+ if (rf != NULL && act->is_acquire()) {
+ rel_heads_list_t release_heads;
+ get_release_seq_heads(act, act, &release_heads);
+ int num_heads = release_heads.size();
+ for (unsigned int i = 0; i < release_heads.size(); i++)
+ if (!act->synchronize_with(release_heads[i])) {
+ set_bad_synchronization();
+ num_heads--;
+ }
+ return num_heads > 0;
+ }
+ return false;
+}
+
+/**
+ * @brief Check whether a model action is enabled.
+ *
+ * Checks whether a lock or join operation would be successful (i.e., is the
+ * lock already locked, or is the joined thread already complete). If not, put
+ * the action in a waiter list.
+ *
+ * @param curr is the ModelAction to check whether it is enabled.
+ * @return a bool that indicates whether the action is enabled.
+ */
+bool ModelChecker::check_action_enabled(ModelAction *curr) {
+ if (curr->is_lock()) {
+ std::mutex *lock = (std::mutex *)curr->get_location();
+ struct std::mutex_state *state = lock->get_state();
+ if (state->islocked) {
+ //Stick the action in the appropriate waiting queue
+ get_safe_ptr_action(lock_waiters_map, curr->get_location())->push_back(curr);
+ return false;
+ }
+ } else if (curr->get_type() == THREAD_JOIN) {
+ Thread *blocking = (Thread *)curr->get_location();
+ if (!blocking->is_complete()) {
+ blocking->push_wait_list(curr);
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/**
+ * Stores the ModelAction for the current thread action. Call this
+ * immediately before switching from user- to system-context to pass
+ * data between them.
+ * @param act The ModelAction created by the user-thread action
+ */
+void ModelChecker::set_current_action(ModelAction *act) {
+ priv->current_action = act;
+}
+
+/**
+ * This is the heart of the model checker routine. It performs model-checking
+ * actions corresponding to a given "current action." Among other processes, it
+ * calculates reads-from relationships, updates synchronization clock vectors,
+ * forms a memory_order constraints graph, and handles replay/backtrack
+ * execution when running permutations of previously-observed executions.
+ *
+ * @param curr The current action to process
+ * @return The next Thread that must be executed. May be NULL if ModelChecker
+ * makes no choice (e.g., according to replay execution, combining RMW actions,
+ * etc.)
+ */
+Thread * ModelChecker::check_current_action(ModelAction *curr)
+{
+ ASSERT(curr);
+ bool second_part_of_rmw = curr->is_rmwc() || curr->is_rmw();
+
+ if (!check_action_enabled(curr)) {
+ /* Make the execution look like we chose to run this action
+ * much later, when a lock/join can succeed */
+ get_current_thread()->set_pending(curr);
+ scheduler->sleep(get_current_thread());
+ return get_next_thread(NULL);
+ }
+
+ bool newly_explored = initialize_curr_action(&curr);
+
+ wake_up_sleeping_actions(curr);
+
+ /* Add the action to lists before any other model-checking tasks */
+ if (!second_part_of_rmw)
+ add_action_to_lists(curr);
+
+ /* Build may_read_from set for newly-created actions */
+ if (newly_explored && curr->is_read())
+ build_reads_from_past(curr);
+
+ /* Initialize work_queue with the "current action" work */
+ work_queue_t work_queue(1, CheckCurrWorkEntry(curr));
+ while (!work_queue.empty() && !has_asserted()) {
+ WorkQueueEntry work = work_queue.front();
+ work_queue.pop_front();
+
+ switch (work.type) {
+ case WORK_CHECK_CURR_ACTION: {
+ ModelAction *act = work.action;
+ bool update = false; /* update this location's release seq's */
+ bool update_all = false; /* update all release seq's */
+
+ if (process_thread_action(curr))
+ update_all = true;
+
+ if (act->is_read() && process_read(act, second_part_of_rmw))
+ update = true;
+
+ if (act->is_write() && process_write(act))
+ update = true;
+
+ if (act->is_fence() && process_fence(act))
+ update_all = true;
+
+ if (act->is_mutex_op() && process_mutex(act))
+ update_all = true;
+
+ if (act->is_relseq_fixup())
+ process_relseq_fixup(curr, &work_queue);
+
+ if (update_all)
+ work_queue.push_back(CheckRelSeqWorkEntry(NULL));
+ else if (update)
+ work_queue.push_back(CheckRelSeqWorkEntry(act->get_location()));
+ break;
+ }
+ case WORK_CHECK_RELEASE_SEQ:
+ resolve_release_sequences(work.location, &work_queue);
+ break;
+ case WORK_CHECK_MO_EDGES: {
+ /** @todo Complete verification of work_queue */
+ ModelAction *act = work.action;
+ bool updated = false;
+
+ if (act->is_read()) {
+ const ModelAction *rf = act->get_reads_from();
+ if (rf != NULL && r_modification_order(act, rf))
+ updated = true;
+ }
+ if (act->is_write()) {
+ if (w_modification_order(act))
+ updated = true;
+ }
+ mo_graph->commitChanges();
+
+ if (updated)
+ work_queue.push_back(CheckRelSeqWorkEntry(act->get_location()));
+ break;
+ }
+ default:
+ ASSERT(false);
+ break;
+ }
+ }
+
+ check_curr_backtracking(curr);
+ set_backtracking(curr);
+ return get_next_thread(curr);
+}
+
+void ModelChecker::check_curr_backtracking(ModelAction *curr)
+{
+ Node *currnode = curr->get_node();
+ Node *parnode = currnode->get_parent();
+
+ if ((parnode && !parnode->backtrack_empty()) ||
+ !currnode->misc_empty() ||
+ !currnode->read_from_empty() ||
+ !currnode->future_value_empty() ||
+ !currnode->promise_empty() ||
+ !currnode->relseq_break_empty()) {
+ set_latest_backtrack(curr);
+ }
+}
+
+bool ModelChecker::promises_expired() const
+{
+ for (unsigned int i = 0; i < promises->size(); i++) {
+ Promise *promise = (*promises)[i];
+ if (promise->get_expiration() < priv->used_sequence_numbers)
+ return true;
+ }
+ return false;
+}
+
+/**
+ * This is the strongest feasibility check available.
+ * @return whether the current trace (partial or complete) must be a prefix of
+ * a feasible trace.
+ */
+bool ModelChecker::isfeasibleprefix() const
+{
+ return pending_rel_seqs->size() == 0 && is_feasible_prefix_ignore_relseq();
+}
+
+/**
+ * Returns whether the current completed trace is feasible, except for pending
+ * release sequences.
+ */
+bool ModelChecker::is_feasible_prefix_ignore_relseq() const
+{
+ if (DBG_ENABLED() && promises->size() != 0)
+ DEBUG("Infeasible: unrevolved promises\n");
+
+ return !is_infeasible() && promises->size() == 0;
+}
+
+/**
+ * Check if the current partial trace is infeasible. Does not check any
+ * end-of-execution flags, which might rule out the execution. Thus, this is
+ * useful only for ruling an execution as infeasible.
+ * @return whether the current partial trace is infeasible.
+ */
+bool ModelChecker::is_infeasible() const
+{
+ if (DBG_ENABLED() && mo_graph->checkForRMWViolation())
+ DEBUG("Infeasible: RMW violation\n");
+
+ return mo_graph->checkForRMWViolation() || is_infeasible_ignoreRMW();
+}
+
+/**
+ * Check If the current partial trace is infeasible, while ignoring
+ * infeasibility related to 2 RMW's reading from the same store. It does not
+ * check end-of-execution feasibility.
+ * @see ModelChecker::is_infeasible
+ * @return whether the current partial trace is infeasible, ignoring multiple
+ * RMWs reading from the same store.
+ * */
+bool ModelChecker::is_infeasible_ignoreRMW() const
+{
+ if (DBG_ENABLED()) {
+ if (mo_graph->checkForCycles())
+ DEBUG("Infeasible: modification order cycles\n");
+ if (priv->failed_promise)
+ DEBUG("Infeasible: failed promise\n");
+ if (priv->too_many_reads)
+ DEBUG("Infeasible: too many reads\n");
+ if (priv->bad_synchronization)
+ DEBUG("Infeasible: bad synchronization ordering\n");
+ if (promises_expired())
+ DEBUG("Infeasible: promises expired\n");
+ }
+ return mo_graph->checkForCycles() || priv->failed_promise ||
+ priv->too_many_reads || priv->bad_synchronization ||
+ promises_expired();
+}
+
+/** Close out a RMWR by converting previous RMWR into a RMW or READ. */
+ModelAction * ModelChecker::process_rmw(ModelAction *act) {
+ ModelAction *lastread = get_last_action(act->get_tid());
+ lastread->process_rmw(act);
+ if (act->is_rmw() && lastread->get_reads_from() != NULL) {
+ mo_graph->addRMWEdge(lastread->get_reads_from(), lastread);
+ mo_graph->commitChanges();
+ }
+ return lastread;
+}
+
+/**
+ * Checks whether a thread has read from the same write for too many times
+ * without seeing the effects of a later write.
+ *
+ * Basic idea:
+ * 1) there must a different write that we could read from that would satisfy the modification order,
+ * 2) we must have read from the same value in excess of maxreads times, and
+ * 3) that other write must have been in the reads_from set for maxreads times.
+ *
+ * If so, we decide that the execution is no longer feasible.
+ */
+void ModelChecker::check_recency(ModelAction *curr, const ModelAction *rf)
+{
+ if (params.maxreads != 0) {
+ if (curr->get_node()->get_read_from_size() <= 1)
+ return;
+ //Must make sure that execution is currently feasible... We could
+ //accidentally clear by rolling back
+ if (is_infeasible())
+ return;
+ std::vector<action_list_t> *thrd_lists = get_safe_ptr_vect_action(obj_thrd_map, curr->get_location());
+ int tid = id_to_int(curr->get_tid());
+
+ /* Skip checks */
+ if ((int)thrd_lists->size() <= tid)
+ return;
+ action_list_t *list = &(*thrd_lists)[tid];
+
+ action_list_t::reverse_iterator rit = list->rbegin();
+ /* Skip past curr */
+ for (; (*rit) != curr; rit++)
+ ;
+ /* go past curr now */
+ rit++;
+
+ action_list_t::reverse_iterator ritcopy = rit;
+ //See if we have enough reads from the same value
+ int count = 0;
+ for (; count < params.maxreads; rit++, count++) {
+ if (rit == list->rend())
+ return;
+ ModelAction *act = *rit;
+ if (!act->is_read())
+ return;
+
+ if (act->get_reads_from() != rf)
+ return;
+ if (act->get_node()->get_read_from_size() <= 1)
+ return;
+ }
+ for (int i = 0; i < curr->get_node()->get_read_from_size(); i++) {
+ /* Get write */
+ const ModelAction *write = curr->get_node()->get_read_from_at(i);
+
+ /* Need a different write */
+ if (write == rf)
+ continue;
+
+ /* Test to see whether this is a feasible write to read from */
+ mo_graph->startChanges();
+ r_modification_order(curr, write);
+ bool feasiblereadfrom = !is_infeasible();
+ mo_graph->rollbackChanges();
+
+ if (!feasiblereadfrom)
+ continue;
+ rit = ritcopy;
+
+ bool feasiblewrite = true;
+ //new we need to see if this write works for everyone
+
+ for (int loop = count; loop > 0; loop--, rit++) {
+ ModelAction *act = *rit;
+ bool foundvalue = false;
+ for (int j = 0; j < act->get_node()->get_read_from_size(); j++) {
+ if (act->get_node()->get_read_from_at(j) == write) {
+ foundvalue = true;
+ break;
+ }
+ }
+ if (!foundvalue) {
+ feasiblewrite = false;
+ break;
+ }
+ }
+ if (feasiblewrite) {
+ priv->too_many_reads = true;
+ return;
+ }
+ }
+ }
+}
+
+/**
+ * Updates the mo_graph with the constraints imposed from the current
+ * read.
+ *
+ * Basic idea is the following: Go through each other thread and find
+ * the lastest action that happened before our read. Two cases:
+ *
+ * (1) The action is a write => that write must either occur before
+ * the write we read from or be the write we read from.
+ *
+ * (2) The action is a read => the write that that action read from
+ * must occur before the write we read from or be the same write.
+ *
+ * @param curr The current action. Must be a read.
+ * @param rf The action that curr reads from. Must be a write.
+ * @return True if modification order edges were added; false otherwise
+ */
+bool ModelChecker::r_modification_order(ModelAction *curr, const ModelAction *rf)
+{
+ std::vector<action_list_t> *thrd_lists = get_safe_ptr_vect_action(obj_thrd_map, curr->get_location());
+ unsigned int i;
+ bool added = false;
+ ASSERT(curr->is_read());
+
+ /* Last SC fence in the current thread */
+ ModelAction *last_sc_fence_local = get_last_seq_cst_fence(curr->get_tid(), NULL);
+
+ /* Iterate over all threads */
+ for (i = 0; i < thrd_lists->size(); i++) {
+ /* Last SC fence in thread i */
+ ModelAction *last_sc_fence_thread_local = NULL;
+ if (int_to_id((int)i) != curr->get_tid())
+ last_sc_fence_thread_local = get_last_seq_cst_fence(int_to_id(i), NULL);
+
+ /* Last SC fence in thread i, before last SC fence in current thread */
+ ModelAction *last_sc_fence_thread_before = NULL;
+ if (last_sc_fence_local)
+ last_sc_fence_thread_before = get_last_seq_cst_fence(int_to_id(i), last_sc_fence_local);
+
+ /* Iterate over actions in thread, starting from most recent */
+ action_list_t *list = &(*thrd_lists)[i];
+ action_list_t::reverse_iterator rit;
+ for (rit = list->rbegin(); rit != list->rend(); rit++) {
+ ModelAction *act = *rit;
+
+ if (act->is_write() && act != rf && act != curr) {
+ /* C++, Section 29.3 statement 5 */
+ if (curr->is_seqcst() && last_sc_fence_thread_local &&
+ *act < *last_sc_fence_thread_local) {
+ mo_graph->addEdge(act, rf);
+ added = true;
+ break;
+ }
+ /* C++, Section 29.3 statement 4 */
+ else if (act->is_seqcst() && last_sc_fence_local &&
+ *act < *last_sc_fence_local) {
+ mo_graph->addEdge(act, rf);
+ added = true;
+ break;
+ }
+ /* C++, Section 29.3 statement 6 */
+ else if (last_sc_fence_thread_before &&
+ *act < *last_sc_fence_thread_before) {
+ mo_graph->addEdge(act, rf);
+ added = true;
+ break;
+ }
+ }
+
+ /*
+ * Include at most one act per-thread that "happens
+ * before" curr. Don't consider reflexively.
+ */
+ if (act->happens_before(curr) && act != curr) {
+ if (act->is_write()) {
+ if (rf != act) {
+ mo_graph->addEdge(act, rf);
+ added = true;
+ }
+ } else {
+ const ModelAction *prevreadfrom = act->get_reads_from();
+ //if the previous read is unresolved, keep going...
+ if (prevreadfrom == NULL)
+ continue;
+
+ if (rf != prevreadfrom) {
+ mo_graph->addEdge(prevreadfrom, rf);
+ added = true;
+ }
+ }
+ break;
+ }
+ }
+ }
+
+ return added;
+}
+
+/** This method fixes up the modification order when we resolve a
+ * promises. The basic problem is that actions that occur after the
+ * read curr could not property add items to the modification order
+ * for our read.
+ *
+ * So for each thread, we find the earliest item that happens after
+ * the read curr. This is the item we have to fix up with additional
+ * constraints. If that action is write, we add a MO edge between
+ * the Action rf and that action. If the action is a read, we add a
+ * MO edge between the Action rf, and whatever the read accessed.
+ *
+ * @param curr is the read ModelAction that we are fixing up MO edges for.
+ * @param rf is the write ModelAction that curr reads from.
+ *
+ */
+void ModelChecker::post_r_modification_order(ModelAction *curr, const ModelAction *rf)
+{
+ std::vector<action_list_t> *thrd_lists = get_safe_ptr_vect_action(obj_thrd_map, curr->get_location());
+ unsigned int i;
+ ASSERT(curr->is_read());
+
+ /* Iterate over all threads */
+ for (i = 0; i < thrd_lists->size(); i++) {
+ /* Iterate over actions in thread, starting from most recent */
+ action_list_t *list = &(*thrd_lists)[i];
+ action_list_t::reverse_iterator rit;
+ ModelAction *lastact = NULL;
+
+ /* Find last action that happens after curr that is either not curr or a rmw */
+ for (rit = list->rbegin(); rit != list->rend(); rit++) {
+ ModelAction *act = *rit;
+ if (curr->happens_before(act) && (curr != act || curr->is_rmw())) {
+ lastact = act;
+ } else
+ break;
+ }
+
+ /* Include at most one act per-thread that "happens before" curr */
+ if (lastact != NULL) {
+ if (lastact == curr) {
+ //Case 1: The resolved read is a RMW, and we need to make sure
+ //that the write portion of the RMW mod order after rf
+
+ mo_graph->addEdge(rf, lastact);
+ } else if (lastact->is_read()) {
+ //Case 2: The resolved read is a normal read and the next
+ //operation is a read, and we need to make sure the value read
+ //is mod ordered after rf
+
+ const ModelAction *postreadfrom = lastact->get_reads_from();
+ if (postreadfrom != NULL && rf != postreadfrom)
+ mo_graph->addEdge(rf, postreadfrom);
+ } else {
+ //Case 3: The resolved read is a normal read and the next
+ //operation is a write, and we need to make sure that the
+ //write is mod ordered after rf
+ if (lastact != rf)
+ mo_graph->addEdge(rf, lastact);
+ }
+ break;
+ }
+ }
+}
+
+/**
+ * Updates the mo_graph with the constraints imposed from the current write.
+ *
+ * Basic idea is the following: Go through each other thread and find
+ * the lastest action that happened before our write. Two cases:
+ *
+ * (1) The action is a write => that write must occur before
+ * the current write
+ *
+ * (2) The action is a read => the write that that action read from
+ * must occur before the current write.
+ *
+ * This method also handles two other issues:
+ *
+ * (I) Sequential Consistency: Making sure that if the current write is
+ * seq_cst, that it occurs after the previous seq_cst write.
+ *
+ * (II) Sending the write back to non-synchronizing reads.
+ *
+ * @param curr The current action. Must be a write.
+ * @return True if modification order edges were added; false otherwise
+ */
+bool ModelChecker::w_modification_order(ModelAction *curr)
+{
+ std::vector<action_list_t> *thrd_lists = get_safe_ptr_vect_action(obj_thrd_map, curr->get_location());
+ unsigned int i;
+ bool added = false;
+ ASSERT(curr->is_write());
+
+ if (curr->is_seqcst()) {
+ /* We have to at least see the last sequentially consistent write,
+ so we are initialized. */
+ ModelAction *last_seq_cst = get_last_seq_cst_write(curr);
+ if (last_seq_cst != NULL) {
+ mo_graph->addEdge(last_seq_cst, curr);
+ added = true;
+ }
+ }
+
+ /* Last SC fence in the current thread */
+ ModelAction *last_sc_fence_local = get_last_seq_cst_fence(curr->get_tid(), NULL);
+
+ /* Iterate over all threads */
+ for (i = 0; i < thrd_lists->size(); i++) {
+ /* Last SC fence in thread i, before last SC fence in current thread */
+ ModelAction *last_sc_fence_thread_before = NULL;
+ if (last_sc_fence_local && int_to_id((int)i) != curr->get_tid())
+ last_sc_fence_thread_before = get_last_seq_cst_fence(int_to_id(i), last_sc_fence_local);
+
+ /* Iterate over actions in thread, starting from most recent */
+ action_list_t *list = &(*thrd_lists)[i];
+ action_list_t::reverse_iterator rit;
+ for (rit = list->rbegin(); rit != list->rend(); rit++) {
+ ModelAction *act = *rit;
+ if (act == curr) {
+ /*
+ * 1) If RMW and it actually read from something, then we
+ * already have all relevant edges, so just skip to next
+ * thread.
+ *
+ * 2) If RMW and it didn't read from anything, we should
+ * whatever edge we can get to speed up convergence.
+ *
+ * 3) If normal write, we need to look at earlier actions, so
+ * continue processing list.
+ */
+ if (curr->is_rmw()) {
+ if (curr->get_reads_from() != NULL)
+ break;
+ else
+ continue;
+ } else
+ continue;
+ }
+
+ /* C++, Section 29.3 statement 7 */
+ if (last_sc_fence_thread_before && act->is_write() &&
+ *act < *last_sc_fence_thread_before) {
+ mo_graph->addEdge(act, curr);
+ added = true;
+ break;
+ }
+
+ /*
+ * Include at most one act per-thread that "happens
+ * before" curr
+ */
+ if (act->happens_before(curr)) {
+ /*
+ * Note: if act is RMW, just add edge:
+ * act --mo--> curr
+ * The following edge should be handled elsewhere:
+ * readfrom(act) --mo--> act
+ */
+ if (act->is_write())
+ mo_graph->addEdge(act, curr);
+ else if (act->is_read()) {
+ //if previous read accessed a null, just keep going
+ if (act->get_reads_from() == NULL)
+ continue;
+ mo_graph->addEdge(act->get_reads_from(), curr);
+ }
+ added = true;
+ break;
+ } else if (act->is_read() && !act->could_synchronize_with(curr) &&
+ !act->same_thread(curr)) {
+ /* We have an action that:
+ (1) did not happen before us
+ (2) is a read and we are a write
+ (3) cannot synchronize with us
+ (4) is in a different thread
+ =>
+ that read could potentially read from our write. Note that
+ these checks are overly conservative at this point, we'll
+ do more checks before actually removing the
+ pendingfuturevalue.
+
+ */
+ if (thin_air_constraint_may_allow(curr, act)) {
+ if (!is_infeasible() ||
+ (curr->is_rmw() && act->is_rmw() && curr->get_reads_from() == act->get_reads_from() && !is_infeasible_ignoreRMW())) {
+ struct PendingFutureValue pfv = {curr, act};
+ futurevalues->push_back(pfv);
+ }
+ }
+ }
+ }
+ }
+
+ return added;
+}
+
+/** Arbitrary reads from the future are not allowed. Section 29.3
+ * part 9 places some constraints. This method checks one result of constraint
+ * constraint. Others require compiler support. */
+bool ModelChecker::thin_air_constraint_may_allow(const ModelAction *writer, const ModelAction *reader)
+{
+ if (!writer->is_rmw())
+ return true;
+
+ if (!reader->is_rmw())
+ return true;
+
+ for (const ModelAction *search = writer->get_reads_from(); search != NULL; search = search->get_reads_from()) {
+ if (search == reader)
+ return false;
+ if (search->get_tid() == reader->get_tid() &&
+ search->happens_before(reader))
+ break;
+ }
+
+ return true;
+}
+
+/**
+ * Arbitrary reads from the future are not allowed. Section 29.3 part 9 places
+ * some constraints. This method checks one the following constraint (others
+ * require compiler support):
+ *
+ * If X --hb-> Y --mo-> Z, then X should not read from Z.
+ */
+bool ModelChecker::mo_may_allow(const ModelAction *writer, const ModelAction *reader)
+{
+ std::vector<action_list_t> *thrd_lists = get_safe_ptr_vect_action(obj_thrd_map, reader->get_location());
+ unsigned int i;
+ /* Iterate over all threads */
+ for (i = 0; i < thrd_lists->size(); i++) {
+ const ModelAction *write_after_read = NULL;
+
+ /* Iterate over actions in thread, starting from most recent */
+ action_list_t *list = &(*thrd_lists)[i];
+ action_list_t::reverse_iterator rit;
+ for (rit = list->rbegin(); rit != list->rend(); rit++) {
+ ModelAction *act = *rit;
+
+ /* Don't disallow due to act == reader */
+ if (!reader->happens_before(act) || reader == act)
+ break;
+ else if (act->is_write())
+ write_after_read = act;
+ else if (act->is_read() && act->get_reads_from() != NULL)
+ write_after_read = act->get_reads_from();
+ }
+
+ if (write_after_read && write_after_read != writer && mo_graph->checkReachable(write_after_read, writer))
+ return false;
+ }
+ return true;
+}
+
+/**
+ * Finds the head(s) of the release sequence(s) containing a given ModelAction.
+ * The ModelAction under consideration is expected to be taking part in
+ * release/acquire synchronization as an object of the "reads from" relation.
+ * Note that this can only provide release sequence support for RMW chains
+ * which do not read from the future, as those actions cannot be traced until
+ * their "promise" is fulfilled. Similarly, we may not even establish the
+ * presence of a release sequence with certainty, as some modification order
+ * constraints may be decided further in the future. Thus, this function
+ * "returns" two pieces of data: a pass-by-reference vector of @a release_heads
+ * and a boolean representing certainty.
+ *
+ * @param rf The action that might be part of a release sequence. Must be a
+ * write.
+ * @param release_heads A pass-by-reference style return parameter. After
+ * execution of this function, release_heads will contain the heads of all the
+ * relevant release sequences, if any exists with certainty
+ * @param pending A pass-by-reference style return parameter which is only used
+ * when returning false (i.e., uncertain). Returns most information regarding
+ * an uncertain release sequence, including any write operations that might
+ * break the sequence.
+ * @return true, if the ModelChecker is certain that release_heads is complete;
+ * false otherwise
+ */
+bool ModelChecker::release_seq_heads(const ModelAction *rf,
+ rel_heads_list_t *release_heads,
+ struct release_seq *pending) const
+{
+ /* Only check for release sequences if there are no cycles */
+ if (mo_graph->checkForCycles())
+ return false;
+
+ while (rf) {
+ ASSERT(rf->is_write());
+
+ if (rf->is_release())
+ release_heads->push_back(rf);
+ else if (rf->get_last_fence_release())
+ release_heads->push_back(rf->get_last_fence_release());
+ if (!rf->is_rmw())
+ break; /* End of RMW chain */
+
+ /** @todo Need to be smarter here... In the linux lock
+ * example, this will run to the beginning of the program for
+ * every acquire. */
+ /** @todo The way to be smarter here is to keep going until 1
+ * thread has a release preceded by an acquire and you've seen
+ * both. */
+
+ /* acq_rel RMW is a sufficient stopping condition */
+ if (rf->is_acquire() && rf->is_release())
+ return true; /* complete */
+
+ rf = rf->get_reads_from();
+ };
+ if (!rf) {
+ /* read from future: need to settle this later */
+ pending->rf = NULL;
+ return false; /* incomplete */
+ }
+
+ if (rf->is_release())
+ return true; /* complete */
+
+ /* else relaxed write
+ * - check for fence-release in the same thread (29.8, stmt. 3)
+ * - check modification order for contiguous subsequence
+ * -> rf must be same thread as release */
+
+ const ModelAction *fence_release = rf->get_last_fence_release();
+ /* Synchronize with a fence-release unconditionally; we don't need to
+ * find any more "contiguous subsequence..." for it */
+ if (fence_release)
+ release_heads->push_back(fence_release);
+
+ int tid = id_to_int(rf->get_tid());
+ std::vector<action_list_t> *thrd_lists = get_safe_ptr_vect_action(obj_thrd_map, rf->get_location());
+ action_list_t *list = &(*thrd_lists)[tid];
+ action_list_t::const_reverse_iterator rit;
+
+ /* Find rf in the thread list */
+ rit = std::find(list->rbegin(), list->rend(), rf);
+ ASSERT(rit != list->rend());
+
+ /* Find the last {write,fence}-release */
+ for (; rit != list->rend(); rit++) {
+ if (fence_release && *(*rit) < *fence_release)
+ break;
+ if ((*rit)->is_release())
+ break;
+ }
+ if (rit == list->rend()) {
+ /* No write-release in this thread */
+ return true; /* complete */
+ } else if (fence_release && *(*rit) < *fence_release) {
+ /* The fence-release is more recent (and so, "stronger") than
+ * the most recent write-release */
+ return true; /* complete */
+ } /* else, need to establish contiguous release sequence */
+ ModelAction *release = *rit;
+
+ ASSERT(rf->same_thread(release));
+
+ pending->writes.clear();
+
+ bool certain = true;
+ for (unsigned int i = 0; i < thrd_lists->size(); i++) {
+ if (id_to_int(rf->get_tid()) == (int)i)
+ continue;
+ list = &(*thrd_lists)[i];
+
+ /* Can we ensure no future writes from this thread may break
+ * the release seq? */
+ bool future_ordered = false;
+
+ ModelAction *last = get_last_action(int_to_id(i));
+ Thread *th = get_thread(int_to_id(i));
+ if ((last && rf->happens_before(last)) ||
+ !is_enabled(th) ||
+ th->is_complete())
+ future_ordered = true;
+
+ ASSERT(!th->is_model_thread() || future_ordered);
+
+ for (rit = list->rbegin(); rit != list->rend(); rit++) {
+ const ModelAction *act = *rit;
+ /* Reach synchronization -> this thread is complete */
+ if (act->happens_before(release))
+ break;
+ if (rf->happens_before(act)) {
+ future_ordered = true;
+ continue;
+ }
+
+ /* Only non-RMW writes can break release sequences */
+ if (!act->is_write() || act->is_rmw())
+ continue;
+
+ /* Check modification order */
+ if (mo_graph->checkReachable(rf, act)) {
+ /* rf --mo--> act */
+ future_ordered = true;
+ continue;
+ }
+ if (mo_graph->checkReachable(act, release))
+ /* act --mo--> release */
+ break;
+ if (mo_graph->checkReachable(release, act) &&
+ mo_graph->checkReachable(act, rf)) {
+ /* release --mo-> act --mo--> rf */
+ return true; /* complete */
+ }
+ /* act may break release sequence */
+ pending->writes.push_back(act);
+ certain = false;
+ }
+ if (!future_ordered)
+ certain = false; /* This thread is uncertain */
+ }
+
+ if (certain) {
+ release_heads->push_back(release);
+ pending->writes.clear();
+ } else {
+ pending->release = release;
+ pending->rf = rf;
+ }
+ return certain;
+}
+
+/**
+ * An interface for getting the release sequence head(s) with which a
+ * given ModelAction must synchronize. This function only returns a non-empty
+ * result when it can locate a release sequence head with certainty. Otherwise,
+ * it may mark the internal state of the ModelChecker so that it will handle
+ * the release sequence at a later time, causing @a acquire to update its
+ * synchronization at some later point in execution.
+ *
+ * @param acquire The 'acquire' action that may synchronize with a release
+ * sequence
+ * @param read The read action that may read from a release sequence; this may
+ * be the same as acquire, or else an earlier action in the same thread (i.e.,
+ * when 'acquire' is a fence-acquire)
+ * @param release_heads A pass-by-reference return parameter. Will be filled
+ * with the head(s) of the release sequence(s), if they exists with certainty.
+ * @see ModelChecker::release_seq_heads
+ */
+void ModelChecker::get_release_seq_heads(ModelAction *acquire,
+ ModelAction *read, rel_heads_list_t *release_heads)
+{
+ const ModelAction *rf = read->get_reads_from();
+ struct release_seq *sequence = (struct release_seq *)snapshot_calloc(1, sizeof(struct release_seq));
+ sequence->acquire = acquire;
+ sequence->read = read;
+
+ if (!release_seq_heads(rf, release_heads, sequence)) {
+ /* add act to 'lazy checking' list */
+ pending_rel_seqs->push_back(sequence);
+ } else {
+ snapshot_free(sequence);
+ }
+}
+
+/**
+ * Attempt to resolve all stashed operations that might synchronize with a
+ * release sequence for a given location. This implements the "lazy" portion of
+ * determining whether or not a release sequence was contiguous, since not all
+ * modification order information is present at the time an action occurs.
+ *
+ * @param location The location/object that should be checked for release
+ * sequence resolutions. A NULL value means to check all locations.
+ * @param work_queue The work queue to which to add work items as they are
+ * generated
+ * @return True if any updates occurred (new synchronization, new mo_graph
+ * edges)
+ */
+bool ModelChecker::resolve_release_sequences(void *location, work_queue_t *work_queue)
+{
+ bool updated = false;
+ std::vector< struct release_seq *, SnapshotAlloc<struct release_seq *> >::iterator it = pending_rel_seqs->begin();
+ while (it != pending_rel_seqs->end()) {
+ struct release_seq *pending = *it;
+ ModelAction *acquire = pending->acquire;
+ const ModelAction *read = pending->read;
+
+ /* Only resolve sequences on the given location, if provided */
+ if (location && read->get_location() != location) {
+ it++;
+ continue;
+ }
+
+ const ModelAction *rf = read->get_reads_from();
+ rel_heads_list_t release_heads;
+ bool complete;
+ complete = release_seq_heads(rf, &release_heads, pending);
+ for (unsigned int i = 0; i < release_heads.size(); i++) {
+ if (!acquire->has_synchronized_with(release_heads[i])) {
+ if (acquire->synchronize_with(release_heads[i]))
+ updated = true;
+ else
+ set_bad_synchronization();
+ }
+ }
+
+ if (updated) {
+ /* Re-check all pending release sequences */
+ work_queue->push_back(CheckRelSeqWorkEntry(NULL));
+ /* Re-check read-acquire for mo_graph edges */
+ if (acquire->is_read())
+ work_queue->push_back(MOEdgeWorkEntry(acquire));
+
+ /* propagate synchronization to later actions */
+ action_list_t::reverse_iterator rit = action_trace->rbegin();
+ for (; (*rit) != acquire; rit++) {
+ ModelAction *propagate = *rit;
+ if (acquire->happens_before(propagate)) {
+ propagate->synchronize_with(acquire);
+ /* Re-check 'propagate' for mo_graph edges */
+ work_queue->push_back(MOEdgeWorkEntry(propagate));
+ }
+ }
+ }
+ if (complete) {
+ it = pending_rel_seqs->erase(it);
+ snapshot_free(pending);
+ } else {
+ it++;
+ }
+ }
+
+ // If we resolved promises or data races, see if we have realized a data race.
+ checkDataRaces();
+
+ return updated;
+}
+
+/**
+ * Performs various bookkeeping operations for the current ModelAction. For
+ * instance, adds action to the per-object, per-thread action vector and to the
+ * action trace list of all thread actions.
+ *
+ * @param act is the ModelAction to add.
+ */
+void ModelChecker::add_action_to_lists(ModelAction *act)
+{
+ int tid = id_to_int(act->get_tid());
+ ModelAction *uninit = NULL;
+ int uninit_id = -1;
+ action_list_t *list = get_safe_ptr_action(obj_map, act->get_location());
+ if (list->empty() && act->is_atomic_var()) {
+ uninit = new_uninitialized_action(act->get_location());
+ uninit_id = id_to_int(uninit->get_tid());
+ list->push_back(uninit);
+ }
+ list->push_back(act);
+
+ action_trace->push_back(act);
+ if (uninit)
+ action_trace->push_front(uninit);
+
+ std::vector<action_list_t> *vec = get_safe_ptr_vect_action(obj_thrd_map, act->get_location());
+ if (tid >= (int)vec->size())
+ vec->resize(priv->next_thread_id);
+ (*vec)[tid].push_back(act);
+ if (uninit)
+ (*vec)[uninit_id].push_front(uninit);
+
+ if ((int)thrd_last_action->size() <= tid)
+ thrd_last_action->resize(get_num_threads());
+ (*thrd_last_action)[tid] = act;
+ if (uninit)
+ (*thrd_last_action)[uninit_id] = uninit;
+
+ if (act->is_fence() && act->is_release()) {
+ if ((int)thrd_last_fence_release->size() <= tid)
+ thrd_last_fence_release->resize(get_num_threads());
+ (*thrd_last_fence_release)[tid] = act;
+ }
+
+ if (act->is_wait()) {
+ void *mutex_loc = (void *) act->get_value();
+ get_safe_ptr_action(obj_map, mutex_loc)->push_back(act);
+
+ std::vector<action_list_t> *vec = get_safe_ptr_vect_action(obj_thrd_map, mutex_loc);
+ if (tid >= (int)vec->size())
+ vec->resize(priv->next_thread_id);
+ (*vec)[tid].push_back(act);
+ }
+}
+
+/**
+ * @brief Get the last action performed by a particular Thread
+ * @param tid The thread ID of the Thread in question
+ * @return The last action in the thread
+ */
+ModelAction * ModelChecker::get_last_action(thread_id_t tid) const
+{
+ int threadid = id_to_int(tid);
+ if (threadid < (int)thrd_last_action->size())
+ return (*thrd_last_action)[id_to_int(tid)];
+ else
+ return NULL;
+}
+
+/**
+ * @brief Get the last fence release performed by a particular Thread
+ * @param tid The thread ID of the Thread in question
+ * @return The last fence release in the thread, if one exists; NULL otherwise
+ */
+ModelAction * ModelChecker::get_last_fence_release(thread_id_t tid) const
+{
+ int threadid = id_to_int(tid);
+ if (threadid < (int)thrd_last_fence_release->size())
+ return (*thrd_last_fence_release)[id_to_int(tid)];
+ else
+ return NULL;
+}
+
+/**
+ * Gets the last memory_order_seq_cst write (in the total global sequence)
+ * performed on a particular object (i.e., memory location), not including the
+ * current action.
+ * @param curr The current ModelAction; also denotes the object location to
+ * check
+ * @return The last seq_cst write
+ */
+ModelAction * ModelChecker::get_last_seq_cst_write(ModelAction *curr) const
+{
+ void *location = curr->get_location();
+ action_list_t *list = get_safe_ptr_action(obj_map, location);
+ /* Find: max({i in dom(S) | seq_cst(t_i) && isWrite(t_i) && samevar(t_i, t)}) */
+ action_list_t::reverse_iterator rit;
+ for (rit = list->rbegin(); rit != list->rend(); rit++)
+ if ((*rit)->is_write() && (*rit)->is_seqcst() && (*rit) != curr)
+ return *rit;
+ return NULL;
+}
+
+/**
+ * Gets the last memory_order_seq_cst fence (in the total global sequence)
+ * performed in a particular thread, prior to a particular fence.
+ * @param tid The ID of the thread to check
+ * @param before_fence The fence from which to begin the search; if NULL, then
+ * search for the most recent fence in the thread.
+ * @return The last prior seq_cst fence in the thread, if exists; otherwise, NULL
+ */
+ModelAction * ModelChecker::get_last_seq_cst_fence(thread_id_t tid, const ModelAction *before_fence) const
+{
+ /* All fences should have NULL location */
+ action_list_t *list = get_safe_ptr_action(obj_map, NULL);
+ action_list_t::reverse_iterator rit = list->rbegin();
+
+ if (before_fence) {
+ for (; rit != list->rend(); rit++)
+ if (*rit == before_fence)
+ break;
+
+ ASSERT(*rit == before_fence);
+ rit++;
+ }
+
+ for (; rit != list->rend(); rit++)
+ if ((*rit)->is_fence() && (tid == (*rit)->get_tid()) && (*rit)->is_seqcst())
+ return *rit;
+ return NULL;
+}
+
+/**
+ * Gets the last unlock operation performed on a particular mutex (i.e., memory
+ * location). This function identifies the mutex according to the current
+ * action, which is presumed to perform on the same mutex.
+ * @param curr The current ModelAction; also denotes the object location to
+ * check
+ * @return The last unlock operation
+ */
+ModelAction * ModelChecker::get_last_unlock(ModelAction *curr) const
+{
+ void *location = curr->get_location();
+ action_list_t *list = get_safe_ptr_action(obj_map, location);
+ /* Find: max({i in dom(S) | isUnlock(t_i) && samevar(t_i, t)}) */
+ action_list_t::reverse_iterator rit;
+ for (rit = list->rbegin(); rit != list->rend(); rit++)
+ if ((*rit)->is_unlock() || (*rit)->is_wait())
+ return *rit;
+ return NULL;
+}
+
+ModelAction * ModelChecker::get_parent_action(thread_id_t tid) const
+{
+ ModelAction *parent = get_last_action(tid);
+ if (!parent)
+ parent = get_thread(tid)->get_creation();
+ return parent;
+}
+
+/**
+ * Returns the clock vector for a given thread.
+ * @param tid The thread whose clock vector we want
+ * @return Desired clock vector
+ */
+ClockVector * ModelChecker::get_cv(thread_id_t tid) const
+{
+ return get_parent_action(tid)->get_cv();
+}
+
+/**
+ * Resolve a set of Promises with a current write. The set is provided in the
+ * Node corresponding to @a write.
+ * @param write The ModelAction that is fulfilling Promises
+ * @return True if promises were resolved; false otherwise
+ */
+bool ModelChecker::resolve_promises(ModelAction *write)
+{
+ bool resolved = false;
+ std::vector< thread_id_t, ModelAlloc<thread_id_t> > threads_to_check;
+
+ for (unsigned int i = 0, promise_index = 0; promise_index < promises->size(); i++) {
+ Promise *promise = (*promises)[promise_index];
+ if (write->get_node()->get_promise(i)) {
+ ModelAction *read = promise->get_action();
+ if (read->is_rmw()) {
+ mo_graph->addRMWEdge(write, read);
+ }
+ read_from(read, write);
+ //First fix up the modification order for actions that happened
+ //before the read
+ r_modification_order(read, write);
+ //Next fix up the modification order for actions that happened
+ //after the read.
+ post_r_modification_order(read, write);
+ //Make sure the promise's value matches the write's value
+ ASSERT(promise->get_value() == write->get_value());
+ delete(promise);
+
+ promises->erase(promises->begin() + promise_index);
+ threads_to_check.push_back(read->get_tid());
+
+ resolved = true;
+ } else
+ promise_index++;
+ }
+
+ //Check whether reading these writes has made threads unable to
+ //resolve promises
+
+ for (unsigned int i = 0; i < threads_to_check.size(); i++)
+ mo_check_promises(threads_to_check[i], write);
+
+ return resolved;
+}
+
+/**
+ * Compute the set of promises that could potentially be satisfied by this
+ * action. Note that the set computation actually appears in the Node, not in
+ * ModelChecker.
+ * @param curr The ModelAction that may satisfy promises
+ */
+void ModelChecker::compute_promises(ModelAction *curr)
+{
+ for (unsigned int i = 0; i < promises->size(); i++) {
+ Promise *promise = (*promises)[i];
+ const ModelAction *act = promise->get_action();
+ if (!act->happens_before(curr) &&
+ act->is_read() &&
+ !act->could_synchronize_with(curr) &&
+ !act->same_thread(curr) &&
+ act->get_location() == curr->get_location() &&
+ promise->get_value() == curr->get_value()) {
+ curr->get_node()->set_promise(i, act->is_rmw());
+ }
+ }
+}
+
+/** Checks promises in response to change in ClockVector Threads. */
+void ModelChecker::check_promises(thread_id_t tid, ClockVector *old_cv, ClockVector *merge_cv)
+{
+ for (unsigned int i = 0; i < promises->size(); i++) {
+ Promise *promise = (*promises)[i];
+ const ModelAction *act = promise->get_action();
+ if ((old_cv == NULL || !old_cv->synchronized_since(act)) &&
+ merge_cv->synchronized_since(act)) {
+ if (promise->increment_threads(tid)) {
+ //Promise has failed
+ priv->failed_promise = true;
+ return;
+ }
+ }
+ }
+}
+
+void ModelChecker::check_promises_thread_disabled() {
+ for (unsigned int i = 0; i < promises->size(); i++) {
+ Promise *promise = (*promises)[i];
+ if (promise->check_promise()) {
+ priv->failed_promise = true;
+ return;
+ }
+ }
+}
+
+/** Checks promises in response to addition to modification order for threads.
+ * Definitions:
+ * pthread is the thread that performed the read that created the promise
+ *
+ * pread is the read that created the promise
+ *
+ * pwrite is either the first write to same location as pread by
+ * pthread that is sequenced after pread or the value read by the
+ * first read to the same lcoation as pread by pthread that is
+ * sequenced after pread..
+ *
+ * 1. If tid=pthread, then we check what other threads are reachable
+ * through the mode order starting with pwrite. Those threads cannot
+ * perform a write that will resolve the promise due to modification
+ * order constraints.
+ *
+ * 2. If the tid is not pthread, we check whether pwrite can reach the
+ * action write through the modification order. If so, that thread
+ * cannot perform a future write that will resolve the promise due to
+ * modificatin order constraints.
+ *
+ * @param tid The thread that either read from the model action
+ * write, or actually did the model action write.
+ *
+ * @param write The ModelAction representing the relevant write.
+ */
+void ModelChecker::mo_check_promises(thread_id_t tid, const ModelAction *write)
+{
+ void *location = write->get_location();
+ for (unsigned int i = 0; i < promises->size(); i++) {
+ Promise *promise = (*promises)[i];
+ const ModelAction *act = promise->get_action();
+
+ //Is this promise on the same location?
+ if (act->get_location() != location)
+ continue;
+
+ //same thread as the promise
+ if (act->get_tid() == tid) {
+
+ //do we have a pwrite for the promise, if not, set it
+ if (promise->get_write() == NULL) {
+ promise->set_write(write);
+ //The pwrite cannot happen before the promise
+ if (write->happens_before(act) && (write != act)) {
+ priv->failed_promise = true;
+ return;
+ }
+ }
+ if (mo_graph->checkPromise(write, promise)) {
+ priv->failed_promise = true;
+ return;
+ }
+ }
+
+ //Don't do any lookups twice for the same thread
+ if (promise->has_sync_thread(tid))
+ continue;
+
+ if (promise->get_write() && mo_graph->checkReachable(promise->get_write(), write)) {
+ if (promise->increment_threads(tid)) {
+ priv->failed_promise = true;
+ return;
+ }
+ }
+ }
+}
+
+/**
+ * Compute the set of writes that may break the current pending release
+ * sequence. This information is extracted from previou release sequence
+ * calculations.
+ *
+ * @param curr The current ModelAction. Must be a release sequence fixup
+ * action.
+ */
+void ModelChecker::compute_relseq_breakwrites(ModelAction *curr)
+{
+ if (pending_rel_seqs->empty())
+ return;
+
+ struct release_seq *pending = pending_rel_seqs->back();
+ for (unsigned int i = 0; i < pending->writes.size(); i++) {
+ const ModelAction *write = pending->writes[i];
+ curr->get_node()->add_relseq_break(write);
+ }
+
+ /* NULL means don't break the sequence; just synchronize */
+ curr->get_node()->add_relseq_break(NULL);
+}
+
+/**
+ * Build up an initial set of all past writes that this 'read' action may read
+ * from. This set is determined by the clock vector's "happens before"