#
# This file is included by Makefile.common. It defines paths and other
# values specific to a particular installation of LLVM.
+#
#===-----------------------------------------------------------------------====
-#
# Target operating system for which LLVM will be compiled.
-#
OS=@OS@
+# Target hardware architecture
+ARCH=@ARCH@
+
+# Endian-ness of the target
+ENDIAN=@ENDIAN@
+
# Path to the C++ compiler to use. This is an optional setting, which defaults
# to whatever your gmake defaults to.
#
# Under Linux, for some reason the compiler driver wants to search the PATH to
# find the system assembler, which breaks if the LLVM assembler is in our path.
# Hack it to use the assembler in /usr/bin directly.
-#
CXX = @CXX@
# We have the same problem with the CC binary, which use used by testcases for
# native builds.
-#
CC := @CC@
-#
-# Compilation flags for the C and C++ compilers.
-#
-CPPFLAGS=@DEFS@
-CCFLAGS=@DEFS@
-LDFLAGS=@LDFLAGS@
-
-#
-# Removed since it prevents the tests from working properly.
-#
-#LIBS=@LIBS@
+# Linker flags.
+LDFLAGS+=@LDFLAGS@
-#
# Libraries needed by tools
-#
TOOLLINKOPTS=@LIBS@
-#
-# Path to the archiver program.
-#
+# Path to the library archiver program.
AR_PATH = @AR@
-#
# The pathnames of the Flex and Bison programs, respectively.
-#
-BISON = @YACC@
+YACC = @YACC@
+BISON = @BISON@
FLEX = @LEX@
-#
# Paths to miscellaneous programs.
-#
-SED = @SED@
-RM = @RM@
-ECHO = @ECHO@
-MKDIR = @abs_top_srcdir@/mkinstalldirs
-DATE = @DATE@
-MV = @MV@
+RPWD = pwd
+SED = sed
+RM = rm
+ECHO = echo
+MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs
+DATE = date
+MV = mv
INSTALL = @INSTALL@
DOT = @DOT@
ETAGS = @ETAGS@
+ETAGSFLAGS = @ETAGSFLAGS@
-#
# Determine the target for which LLVM should generate code.
-#
LLVMGCCARCH := @target@/3.4-llvm
+# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
+LCC1 = @LLVMCC1@
+LCC1XX = @LLVMCC1PLUS@
+
# Path to directory where object files should be stored during a build.
# Set OBJ_ROOT to "." if you do not want to use a separate place for
# object files.
-#
-#OBJ_ROOT = .
-OBJ_ROOT := @OBJROOT@
+OBJ_ROOT := .
# Path to location for LLVM front-end this should only be specified here if you
# want to override the value set in Makefile.$(uname)
-#
LLVMGCCDIR := @LLVMGCCDIR@
-# When this setting is set to true, programs in the llvm/test/Programs hierarchy
+# When this variable is set to 1, programs in the llvm/test/Programs hierarchy
# are not recompiled from source code. Instead, the bytecode for the file is
# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk
# space is limited or when you just don't want to spend time running the C
# frontend.
-#
#USE_PRECOMPILED_BYTECODE := 1
@UPB@
# versions of the test/Programs/* programs. This is used as the bytecode source
# when USE_PRECOMPILED_BYTECODE is specified or when source code is not
# available for the program (such as SPEC).
-#
BYTECODE_REPOSITORY := @BCR@
-# Path to location for purify, this is only needed if you build with
-# ENABLE_PURIFY=1
-#
-PURIFY = @PURIFY@
-
-#
# SPEC benchmarks:
# Set the USE_SPEC variable to enable the use of the SPEC benchmarks.
# You must provide the SPEC benchmarks on your own.
-#
@USE_SPEC@
+@USE_SPEC95@
-#
# Path to the SPEC benchmarks. If you have the SPEC benchmarks, place the
# path here.
-#
#SPEC_ROOT := /home/vadve/shared/benchmarks/speccpu2000/benchspec
SPEC_ROOT := @SPEC_ROOT@
+SPEC95_ROOT := @SPEC95_ROOT@
+
+# Path to the Povray source code.
+@USE_POVRAY@
+POVRAY_ROOT := @POVRAY_ROOT@
-#
# Path to the PAPI code. This is used by the reoptimizer only.
-#
#PAPIDIR := /home/vadve/shared/papi-2.3.4.1
PAPIDIR := @PAPIDIR@
# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1)
-#
+# make command line (ie, make ENABLE_PROFILING=1):
# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
# turned on, and Debug builds are turned off.
-#
#ENABLE_OPTIMIZED = 1
@ENABLE_OPTIMIZED@
# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
# information to allow gprof to be used to get execution frequencies.
-#
#ENABLE_PROFILING = 1
-@ENABLE_PROFILING@
-#
-# This open tells the Makefiles to produce verbose output.
+# This option tells the Makefiles to produce verbose output.
# It essentially prints the commands that make is executing
-#
#VERBOSE = 1
-@ENABLE_VERBOSE@
-
-# When ENABLE_PURIFY is set to 1, the LLVM tools are linked with purify (which
-# must be locally installed) to allow for some automated memory error debugging.
-#
-#ENABLE_PURIFY = 1
-@ENABLE_PURIFY@
-#
# Enable JIT for this platform
-#
@JIT@
-#
# Disable LLC diffs for testing.
-#
@DISABLE_LLC_DIFFS@
+# Shared library extension for this platform.
+SHLIBEXT = @SHLIBEXT@
+
+###########################################################################
+# Directory Configuration
+# This section of the Makefile determines what is where. To be
+# specific, there are several locations that need to be defined:
+#
+# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
+# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
+#
+# o BUILD_SRC_DIR : The directory containing the code to build.
+# o BUILD_SRC_ROOT : The root directory of the code to build.
+#
+# o BUILD_OBJ_DIR : The directory in which compiled code will be placed.
+# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
+#
+###########################################################################
+
+# Set the object build directory. By default, it is the current directory.
+ifndef BUILD_OBJ_DIR
+BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
+endif
+
+# Set the root of the object directory.
+ifndef BUILD_OBJ_ROOT
+BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
+endif
+
+# Set the source build directory. That is almost always the current directory.
+ifndef BUILD_SRC_DIR
+BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
+endif
+
+# Set the source root directory.
+ifndef BUILD_SRC_ROOT
+BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
+endif
+
+# Set the LLVM object directory.
+ifndef LLVM_OBJ_ROOT
+ifdef LLVM_SRC_ROOT
+LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
+else
+LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
+endif
+endif
+
+# Set the LLVM source directory.
+# It is typically the root directory of what we're compiling now.
+ifndef LLVM_SRC_ROOT
+LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
+endif
+
+# Set SourceDir for backwards compatbility.
+ifndef SourceDir
+SourceDir=$(BUILD_SRC_DIR)
+endif
+
+# Installation directories, as provided by the configure script.
+exec_prefix = @exec_prefix@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
+includedir = @includedir@
+infodir = @infodir@
+mandir = @mandir@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_DATA = @INSTALL_DATA@
+