# This file is included by all of the LLVM makefiles. For details on how to use
# it properly, please see the document MakefileGuide.html in the docs directory.
#
-#===-----------------------------------------------------------------------====
+#===-----------------------------------------------------------------------====#
################################################################################
# TARGETS: Define standard targets that can be invoked
#--------------------------------------------------------------------
# Set the VPATH so that we can find source files.
#--------------------------------------------------------------------
-VPATH=$(BUILD_SRC_DIR)
+VPATH=$(PROJ_SRC_DIR)
#--------------------------------------------------------------------
# Reset the list of suffixes we know how to build
#--------------------------------------------------------------------
.SUFFIXES:
-.SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a .bc .td .ps .dot
+.SUFFIXES: .c .cpp .cc .h .hpp .y .l .lo .o .a .bc .td .ps .dot .ll
.SUFFIXES: $(SHLIBEXT) $(SUFFIXES)
#--------------------------------------------------------------------
################################################################################
SrcMakefiles := $(filter %Makefile %Makefile.tests,\
- $(wildcard $(BUILD_SRC_DIR)/Makefile*))
-ObjMakefiles := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SrcMakefiles))
-ConfigureScript := $(LLVM_SRC_ROOT)/configure
-ConfigStatusScript := $(LLVM_OBJ_ROOT)/config.status
-MakefileConfigIn := $(LLVM_SRC_ROOT)/Makefile.config.in
-MakefileConfig := $(LLVM_OBJ_ROOT)/Makefile.config
-PreConditions := $(ConfigStatusScript) $(MakefileConfig) $(ObjMakefiles)
+ $(wildcard $(PROJ_SRC_DIR)/Makefile*))
+ObjMakefiles := $(subst $(PROJ_SRC_DIR),$(PROJ_OBJ_DIR),$(SrcMakefiles))
+ConfigureScript := $(PROJ_SRC_ROOT)/configure
+ConfigStatusScript := $(PROJ_OBJ_ROOT)/config.status
+MakefileConfigIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.config.in))
+MakefileCommonIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.common.in))
+MakefileConfig := $(PROJ_OBJ_ROOT)/Makefile.config
+MakefileCommon := $(PROJ_OBJ_ROOT)/Makefile.common
+PreConditions := $(ConfigStatusScript) $(ObjMakefiles)
+ifneq ($(MakefileCommonIn),)
+PreConditions += $(MakefileCommon)
+endif
+
+ifneq ($(MakefileConfigIn),)
+PreConditions += $(MakefileConfig)
+endif
-preconditions : $(PreConditions)
+preconditions: $(PreConditions)
#------------------------------------------------------------------------
# Make sure the BUILT_SOURCES are built first
#------------------------------------------------------------------------
$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES)
-clean-local::
+clean-all-local::
ifneq ($(strip $(BUILT_SOURCES)),)
-$(Verb) $(RM) -f $(BUILT_SOURCES)
endif
-ifneq ($(BUILD_OBJ_ROOT),$(BUILD_SRC_ROOT))
+ifneq ($(PROJ_OBJ_ROOT),$(PROJ_SRC_ROOT))
spotless:
- $(Echo) Wiping out $(BUILD_OBJ_ROOT) and rebuilding configuration.
$(Verb) if test -x config.status ; then \
- $(MV) config.status .. ; \
- $(MV) mklib .. ; \
+ $(EchoCmd) Wiping out $(PROJ_OBJ_ROOT) ; \
+ $(MKDIR) .spotless.save ; \
+ $(MV) config.status .spotless.save ; \
+ $(MV) mklib .spotless.save ; \
+ $(MV) projects .spotless.save ; \
$(RM) -rf * ; \
- $(MV) ../config.status . ; \
- $(MV) ../mklib . ; \
- ./config.status ; \
+ $(MV) .spotless.save/config.status . ; \
+ $(MV) .spotless.save/mklib . ; \
+ $(MV) .spotless.save/projects . ; \
+ $(RM) -rf .spotless.save ; \
+ $(EchoCmd) Rebuilding configuration of $(PROJ_OBJ_ROOT) ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript) ; \
else \
- $(EchoCmd) "make spotless" can only be run from $(BUILD_OBJ_ROOT); \
+ $(EchoCmd) "make spotless" can only be run from $(PROJ_OBJ_ROOT); \
fi
+else
+spotless:
+ $(EchoCmd) "spotless target not supported for objdir == srcdir"
endif
$(BUILT_SOURCES) : $(ObjMakefiles)
#------------------------------------------------------------------------
# Make sure we're not using a stale configuration
#------------------------------------------------------------------------
+reconfigure:
+ $(Echo) Reconfiguring $(PROJ_OBJ_ROOT)
+ $(Verb) cd $(PROJ_OBJ_ROOT) && \
+ if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \
+ fi ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript)
+
.PRECIOUS: $(ConfigStatusScript)
$(ConfigStatusScript): $(ConfigureScript)
$(Echo) Reconfiguring with $<
- $(Verb) cd $(BUILD_OBJ_ROOT) && \
+ $(Verb) cd $(PROJ_OBJ_ROOT) && \
+ if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \
+ fi ; \
$(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
$(ConfigStatusScript)
#------------------------------------------------------------------------
# Make sure the configuration makefile is up to date
#------------------------------------------------------------------------
+ifneq ($(MakefileConfigIn),)
$(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript)
$(Echo) Regenerating $@
- $(Verb) cd $(LLVM_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+endif
+
+ifneq ($(MakefileCommonIn),)
+$(MakefileCommon): $(MakefileCommonIn) $(ConfigStatusScript)
+ $(Echo) Regenerating $@
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.common
+endif
#------------------------------------------------------------------------
# If the Makefile in the source tree has been updated, copy it over into the
# build tree. But, only do this if the source and object makefiles differ
#------------------------------------------------------------------------
-ifneq ($(BUILD_OBJ_DIR),$(BUILD_SRC_DIR))
+ifneq ($(PROJ_OBJ_DIR),$(PROJ_SRC_DIR))
-Makefile: $(BUILD_SRC_DIR)/Makefile
+Makefile: $(PROJ_SRC_DIR)/Makefile
$(Echo) "Updating Makefile"
$(Verb) $(MKDIR) $(@D)
- $(Verb) cp -f $< $@
+ $(Verb) $(CP) -f $< $@
# Copy the Makefile.* files unless we're in the root directory which avoids
# the copying of Makefile.config.in or other things that should be explicitly
# taken care of.
-$(BUILD_OBJ_DIR)/Makefile% : $(BUILD_SRC_DIR)/Makefile%
+$(PROJ_OBJ_DIR)/Makefile% : $(PROJ_SRC_DIR)/Makefile%
@case '$?' in \
*Makefile.rules) ;; \
*.in) ;; \
*) $(Echo) "Updating $(@F)" ; \
$(MKDIR) $(@D) ; \
- cp -f $< $@ ;; \
+ $(CP) -f $< $@ ;; \
esac
endif
# Variables derived from configuration we are building
#--------------------------------------------------------------------
+# OPTIMIZE_OPTION - The optimization level option we want to build LLVM with
+# this can be overridden on the make command line.
+ifneq ($(OS),MingW)
+ OPTIMIZE_OPTION := -O3
+else
+ OPTIMIZE_OPTION := -O2
+endif
+
ifdef ENABLE_PROFILING
BuildMode := Profile
- CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg
- C.Flags := -O3 -DNDEBUG -pg
- LD.Flags := -O3 -DNDEBUG -pg
+ CXX.Flags := $(OPTIMIZE_OPTION) -pg -g
+ C.Flags := $(OPTIMIZE_OPTION) -pg -g
+ LD.Flags := $(OPTIMIZE_OPTION) -pg -g
else
- ifdef ENABLE_OPTIMIZED
+ ifeq ($(ENABLE_OPTIMIZED),1)
BuildMode := Release
- CXX.Flags := -O3 -DNDEBUG -finline-functions \
- -felide-constructors -fomit-frame-pointer
- C.Flags := -O3 -DNDEBUG -fomit-frame-pointer
- LD.Flags := -O3 -DNDEBUG
+ # Don't use -fomit-frame-pointer on Darwin or FreeBSD.
+ ifneq ($(OS),FreeBSD)
+ ifneq ($(OS),Darwin)
+ OmitFramePointer := -fomit-frame-pointer
+ endif
+ endif
+
+ # Darwin requires -fstrict-aliasing to be explicitly enabled.
+ ifeq ($(OS),Darwin)
+ EXTRA_OPTIONS += -fstrict-aliasing
+ endif
+
+ CXX.Flags := $(OPTIMIZE_OPTION) $(OmitFramePointer)
+ C.Flags := $(OPTIMIZE_OPTION) $(OmitFramePointer)
+ LD.Flags := $(OPTIMIZE_OPTION)
else
BuildMode := Debug
- CXX.Flags := -g -D_DEBUG
- C.Flags := -g -D_DEBUG
- LD.Flags := -g -D_DEBUG
+ CXX.Flags := -g
+ C.Flags := -g
+ LD.Flags := -g
KEEP_SYMBOLS := 1
endif
endif
-CXX.Flags += $(CXXFLAGS)
-C.Flags += $(CFLAGS)
-CPP.Flags += $(CPPFLAGS)
-LD.Flags += $(LDFLAGS)
-AR.Flags := cru
+# IF REQUIRES_EH=1 is specified then don't disable exceptions
+ifndef REQUIRES_EH
+ CXX.Flags += -fno-exceptions
+endif
+
+# If DISABLE_ASSERTIONS=1 is specified (make command line or configured),
+# then disable assertions by defining the appropriate preprocessor symbols.
+ifdef DISABLE_ASSERTIONS
+ BuildMode := $(BuildMode)-Asserts
+ CXX.Flags += -DNDEBUG
+ C.Flags += -DNDEBUG
+else
+ CXX.Flags += -D_DEBUG
+ C.Flags += -D_DEBUG
+endif
+
+ifeq ($(ENABLE_PIC),1)
+ CXX.Flags += -fPIC
+ C.Flags += -fPIC
+endif
+
+CXX.Flags += $(CXXFLAGS) -Woverloaded-virtual
+C.Flags += $(CFLAGS)
+CPP.BaseFlags += $(CPPFLAGS)
+LD.Flags += $(LDFLAGS)
+AR.Flags := cru
LibTool.Flags := --tag=CXX
+# Make Floating point IEEE compliant on Alpha.
+ifeq ($(ARCH),Alpha)
+ CXX.Flags += -mieee
+ CPP.BaseFlags += -mieee
+ifeq ($(ENABLE_PIC),0)
+ CXX.Flags += -fPIC
+ CPP.BaseFlags += -fPIC
+endif
+endif
+
+ifeq ($(ARCH),Alpha)
+ LD.Flags += -Wl,--no-relax
+endif
+
#--------------------------------------------------------------------
# Directory locations
#--------------------------------------------------------------------
-ObjDir := $(BUILD_OBJ_DIR)/$(BuildMode)
-LibDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/lib
-ToolDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/bin
-ExmplDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/examples
+ObjDir := $(PROJ_OBJ_DIR)/$(BuildMode)
+LibDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/lib
+ToolDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/bin
+ExmplDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/examples
LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib
LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin
-LExmplDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+LLVMExmplDir:= $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+CFERuntimeLibDir := $(LLVMGCCDIR)/lib
#--------------------------------------------------------------------
# Full Paths To Compiled Tools and Utilities
#--------------------------------------------------------------------
-EchoCmd := $(ECHO) llvm[$(MAKELEVEL)]:
-Echo := @$(EchoCmd)
+EchoCmd = $(ECHO) llvm[$(MAKELEVEL)]:
+Echo = @$(EchoCmd)
ifndef LIBTOOL
LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
endif
ifndef LLVMAS
LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT)
endif
-ifndef BURG
-BURG := $(LLVMToolDir)/burg$(EXEEXT)
-endif
ifndef TBLGEN
-TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
-endif
-ifndef GCCAS
-GCCAS := $(LLVMToolDir)/gccas$(EXEEXT)
-endif
-ifndef GCCLD
-GCCLD := $(LLVMToolDir)/gccld$(EXEEXT)
-endif
-ifndef LLVMGCC
-LLVMGCC := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/gcc
+ ifeq ($(LLVM_CROSS_COMPILING),1)
+ TBLGEN := $(LLVMToolDir)/tblgen$(BUILD_EXEEXT)
+ else
+ TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
+ endif
endif
-ifndef LLVMGXX
-LLVMGXX := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/g++
+LLVM_CONFIG := $(LLVMToolDir)/llvm-config
+ifndef LLVMLD
+LLVMLD := $(LLVMToolDir)/llvm-ld$(EXEEXT)
endif
-ifndef LDIS
+ifndef LLVMDIS
LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
endif
ifndef LLI
LLI := $(LLVMToolDir)/lli$(EXEEXT)
endif
+ifndef LLC
+LLC := $(LLVMToolDir)/llc$(EXEEXT)
+endif
ifndef LOPT
LOPT := $(LLVMToolDir)/opt$(EXEEXT)
endif
+ifndef LBUGPOINT
+LBUGPOINT := $(LLVMToolDir)/bugpoint$(EXEEXT)
+endif
+ifndef LUPGRADE
+LUPGRADE := $(LLVMToolDir)/llvm-upgrade$(EXEEXT)
+endif
+ifeq ($(LLVMGCC_MAJVERS),3)
+UPGRADE_MSG = $(Echo) "Upgrading $(1) assembly to latest."
+UPGRADE_LL = $(Verb)$(LUPGRADE) $(1) -o $(1).up.tmp -f ; $(MV) $(1).up.tmp $(1)
+LLVMGCCWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGCC)
+LLVMGXXWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGXX)
+else
+UPGRADE_MSG =
+UPGRADE_LL =
+LLVMGCCWITHPATH := $(LLVMGCC)
+LLVMGXXWITHPATH := $(LLVMGXX)
+endif
#--------------------------------------------------------------------
# Adjust to user's request
#--------------------------------------------------------------------
-# Adjust LIBTOOL flags for shared libraries, or not.
-ifndef SHARED_LIBRARY
- LibTool.Flags += --tag=disable-shared
-else
+# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is
+# to be built. Note that if LOADABLE_MODULE is specified then the resulting
+# shared library can be opened with dlopen. Also, LOADABLE_MODULE implies
+# several other things so we force them to be defined/on.
+ifdef LOADABLE_MODULE
+ SHARED_LIBRARY := 1
+ DONT_BUILD_RELINKED := 1
+ LINK_LIBS_IN_SHARED := 1
+ LD.Flags += -module
+endif
+
+ifdef SHARED_LIBRARY
LD.Flags += -rpath $(LibDir)
+else
+ LibTool.Flags += --tag=disable-shared
endif
ifdef TOOL_VERBOSE
Verb := @
LibTool.Flags += --silent
AR.Flags += >/dev/null 2>/dev/null
- ConfigureScriptFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1
+ ConfigureScriptFLAGS += >$(PROJ_OBJ_DIR)/configure.out 2>&1
else
ConfigureScriptFLAGS :=
endif
ifndef KEEP_SYMBOLS
Strip := $(PLATFORMSTRIPOPTS)
StripWarnMsg := "(without symbols)"
+ Install.StripFlag += -s
endif
# Adjust linker flags for building an executable
# Options To Invoke Tools
#----------------------------------------------------------
-CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
+CompileCommonOpts := -pedantic -Wall -W -Wwrite-strings -Wno-long-long \
+ -Wunused -Wno-unused-parameter $(EXTRA_OPTIONS)
-LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
-CPP.Flags += -I$(BUILD_OBJ_DIR) \
- -I$(BUILD_SRC_DIR) \
- -I$(BUILD_SRC_ROOT)/include \
- -I$(BUILD_OBJ_ROOT)/include \
- -I$(LLVM_OBJ_ROOT)/include \
- -I$(LLVM_SRC_ROOT)/include \
- -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+ifeq ($(OS),HP-UX)
+ CompileCommonOpts := -D_REENTRANT -D_HPUX_SOURCE
+endif
-Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
+# If we are building a universal binary on Mac OS/X, pass extra options. This
+# is useful to people that want to link the LLVM libraries into their universal
+# apps.
+#
+# The following can be optionally specified:
+# UNIVERSAL_SDK_PATH variable can be specified as a path to the SDK to use.
+# For Mac OS/X 10.4 Intel machines, the traditional one is:
+# UNIVERSAL_SDK_PATH=/Developer/SDKs/MacOSX10.4u.sdk/
+# UNIVERSAL_ARCH can be optionally specified to be a list of architectures
+# to build for, e.g. UNIVERSAL_ARCH="i386 ppc ppc64". This defaults to
+# i386/ppc only.
+ifdef UNIVERSAL
+ ifndef UNIVERSAL_ARCH
+ UNIVERSAL_ARCH := i386 ppc
+ endif
+ UNIVERSAL_ARCH_OPTIONS := $(UNIVERSAL_ARCH:%=-arch %)
+ CompileCommonOpts += $(UNIVERSAL_ARCH_OPTIONS)
+ Relink.Flags := $(UNIVERSAL_ARCH_OPTIONS:%=-XCClinker %)
+ ifdef UNIVERSAL_SDK_PATH
+ CompileCommonOpts += -isysroot $(UNIVERSAL_SDK_PATH)
+ Relink.Flags += -XCClinker -isysroot -XCClinker $(UNIVERSAL_SDK_PATH)
+ endif
+
+ # Building universal cannot compute dependencies automatically.
+ DISABLE_AUTO_DEPENDENCIES=1
+endif
+
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+CPP.BaseFlags += -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+# All -I flags should go here, so that they don't confuse llvm-config.
+CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
+ -I$(PROJ_OBJ_ROOT)/include \
+ -I$(PROJ_SRC_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ $(CPP.BaseFlags)
+
+Compile.C = $(CC) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts) -c
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
-BCCompile.C = $(LLVMGCC) $(CPP.Flags) $(CompileCommonOpts) $(C.Flags) -c
-Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts)
+Preprocess.C = $(CC) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts) -E
+
+Compile.CXX = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) -c
LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
-BCCompile.CXX = $(LLVMGXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
-Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
- $(CompileCommonOpts) $(LD.Flags) $(Strip)
-Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CXX.Flags) \
$(CompileCommonOpts)
-LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL)
-Burg = $(BURG) -I $(BUILD_SRC_DIR)
-TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR)
+
+Preprocess.CXX= $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -E
+Link = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) \
+ $(LD.Flags) $(Strip)
+LTLink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Link)
+Relink = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) \
+ $(Relink.Flags)
+LTRelink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Relink)
+LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) \
+ $(Install.Flags)
+ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
+ScriptInstall = $(INSTALL) -m 0755
+DataInstall = $(INSTALL) -m 0644
+TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR) -I$(PROJ_SRC_ROOT)/include \
+ -I $(PROJ_SRC_ROOT)/lib/Target
Archive = $(AR) $(AR.Flags)
LArchive = $(LLVMToolDir)/llvm-ar rcsf
ifdef RANLIB
# Get the list of source files and compute object file
# names from them.
#----------------------------------------------------------
-ifdef FAKE_SOURCES
- Sources :=
- FakeSources := $(FAKE_SOURCES)
- ifdef BUILT_SOURCES
- FakeSources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
- endif
- BaseNameSources := $(sort $(basename $(FakeSources)))
- ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
- ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
- ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
-else
- ifndef SOURCES
- Sources := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \
- $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \
- $(BUILD_SRC_DIR)/*.l))
- else
- Sources := $(SOURCES)
- endif
- ifdef BUILT_SOURCES
- Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
- endif
+ifndef SOURCES
+ Sources := $(notdir $(wildcard $(PROJ_SRC_DIR)/*.cpp \
+ $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c $(PROJ_SRC_DIR)/*.y \
+ $(PROJ_SRC_DIR)/*.l))
+else
+ Sources := $(SOURCES)
+endif
- BaseNameSources := $(sort $(basename $(Sources)))
- ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
- ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
- ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
+ifdef BUILT_SOURCES
+Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
endif
+BaseNameSources := $(sort $(basename $(Sources)))
+
+ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o)
+ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo)
+ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc)
+
###############################################################################
# DIRECTORIES: Handle recursive descent of directory structure
###############################################################################
# in the file so they get built before dependencies
#---------------------------------------------------------
-$(bindir):
- $(Verb) $(MKDIR) $(bindir)
-
-$(libdir):
- $(Verb) $(MKDIR) $(libdir)
-
-$(includedir):
- $(Verb) $(MKDIR) $(includedir)
-
-$(sysconfdir):
- $(Verb) $(MKDIR) $(sysconfdir)
+$(PROJ_bindir): $(PROJ_bindir)/.dir
+$(PROJ_libdir): $(PROJ_libdir)/.dir
+$(PROJ_includedir): $(PROJ_includedir)/.dir
+$(PROJ_etcdir): $(PROJ_etcdir)/.dir
# To create other directories, as needed, and timestamp their creation
%/.dir:
SubDirs :=
ifdef DIRS
SubDirs += $(DIRS)
+
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
$(RecursiveTargets)::
$(Verb) for dir in $(DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- ($(MAKE) -C $$dir $@ ) || exit 1; \
- fi ; \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
done
+else
+$(RecursiveTargets)::
+ $(Verb) for dir in $(DIRS); do \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
+ done
+endif
+
endif
#---------------------------------------------------------
$(Verb) for dir in $(EXPERIMENTAL_DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- ($(MAKE) -C $$dir $@ ) || exit 0; \
- fi ; \
+ ($(MAKE) -C $$dir $@ ) || exit 0; \
done
endif
-#---------------------------------------------------------
+#-----------------------------------------------------------
# Handle the PARALLEL_DIRS options for parallel construction
-#---------------------------------------------------------
+#-----------------------------------------------------------
ifdef PARALLEL_DIRS
SubDirs += $(PARALLEL_DIRS)
$(ParallelTargets) :
$(Verb) if [ ! -f $(@D)/Makefile ]; then \
$(MKDIR) $(@D); \
- cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \
- fi
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@)
endif
#---------------------------------------------------------
SubDirs += $(OPTIONAL_DIRS)
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
$(RecursiveTargets)::
$(Verb) for dir in $(OPTIONAL_DIRS); do \
- if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\
+ if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
- if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
- ($(MAKE) -C$$dir $@ ) || exit 1; \
- fi ; \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
fi \
done
+else
+$(RecursiveTargets)::
+ $(Verb) for dir in $(OPTIONAL_DIRS); do \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
+ done
+endif
endif
#---------------------------------------------------------
#---------------------------------------------------------
ifdef CONFIG_FILES
-install-local:: $(sysconfdir) $(CONFIG_FILES)
- $(Echo) Installing Configuration Files To $(sysconfdir)
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) UnInstall circumvented with NO_INSTALL
+else
+install-local:: $(PROJ_etcdir) $(CONFIG_FILES)
+ $(Echo) Installing Configuration Files To $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
- if test -f $(BUILD_OBJ_DIR)/$${file} ; then \
- $(INSTALL) $(BUILD_OBJ_DIR)/$${file} $(sysconfdir) ; \
- elif test -f $(BUILD_SRC_DIR)/$${file} ; then \
- $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \
+ if test -f $(PROJ_OBJ_DIR)/$${file} ; then \
+ $(DataInstall) $(PROJ_OBJ_DIR)/$${file} $(PROJ_etcdir) ; \
+ elif test -f $(PROJ_SRC_DIR)/$${file} ; then \
+ $(DataInstall) $(PROJ_SRC_DIR)/$${file} $(PROJ_etcdir) ; \
else \
$(ECHO) Error: cannot find config file $${file}. ; \
fi \
done
uninstall-local::
- $(Echo) Uninstalling Configuration Files From $(sysconfdir)
+ $(Echo) Uninstalling Configuration Files From $(PROJ_etcdir)
$(Verb)for file in $(CONFIG_FILES); do \
- $(RM) -f $(sysconfdir)/$${file} ; \
+ $(RM) -f $(PROJ_etcdir)/$${file} ; \
done
+endif
endif
+###############################################################################
+# Set up variables for building libararies
+###############################################################################
+
+#---------------------------------------------------------
+# Define various command line options pertaining to the
+# libraries needed when linking. There are "Proj" libs
+# (defined by the user's project) and "LLVM" libs (defined
+# by the LLVM project).
+#---------------------------------------------------------
+
+ifdef USEDLIBS
+ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
+ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
+endif
+
+ifdef LLVMLIBS
+LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
+LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
+LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
+endif
+
+ifeq ($(strip $(filter clean clean-local dist-clean,$(MAKECMDGOALS))),)
+ifdef LINK_COMPONENTS
+
+# If LLVM_CONFIG doesn't exist, build it. This can happen if you do a make
+# clean in tools, then do a make in tools (instead of at the top level).
+$(LLVM_CONFIG):
+ @echo "*** llvm-config doesn't exist - rebuilding it."
+ @$(MAKE) -C $(PROJ_OBJ_ROOT)/tools/llvm-config
+
+$(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT): $(LLVM_CONFIG)
+
+ProjLibsOptions += $(shell $(LLVM_CONFIG) --libs $(LINK_COMPONENTS))
+ProjLibsPaths += $(LLVM_CONFIG) \
+ $(shell $(LLVM_CONFIG) --libfiles $(LINK_COMPONENTS))
+endif
+endif
+
###############################################################################
# Library Build Rules: Four ways to build a library
###############################################################################
#---------------------------------------------------------
ifdef MODULE_NAME
+ifeq ($(strip $(LLVMGCC)),)
+$(warning Modules require llvm-gcc but no llvm-gcc is available ****)
+else
Module := $(LibDir)/$(MODULE_NAME).bc
-LinkModule := $(LLVMGCC) -shared -nostdlib
+LinkModule := $(LLVMLD) -L$(CFERuntimeLibDir)
+
ifdef EXPORTED_SYMBOL_FILE
-LinkMOdule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+LinkModule += -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
endif
-$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
- $(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@)
+$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(LLVMLD)
+ $(Echo) Building $(BuildMode) Bytecode Module $(notdir $@)
$(Verb) $(LinkModule) -o $@ $(ObjectsBC)
all-local:: $(Module)
ifdef BYTECODE_DESTINATION
ModuleDestDir := $(BYTECODE_DESTINATION)
else
-ModuleDestDir := $(libdir)
+ModuleDestDir := $(PROJ_libdir)
endif
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
install-module:: $(DestModule)
$(DestModule): $(ModuleDestDir) $(Module)
$(Echo) Installing $(BuildMode) Bytecode Module $(DestModule)
- $(Verb) $(INSTALL) $(Module) $@
+ $(Verb) $(DataInstall) $(Module) $(DestModule)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule)
-$(Verb) $(RM) -f $(DestModule)
+endif
+endif
endif
# if we're building a library ...
# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
LIBRARYNAME := $(strip $(LIBRARYNAME))
+ifdef LOADABLE_MODULE
+LibName.LA := $(LibDir)/$(LIBRARYNAME).la
+else
LibName.LA := $(LibDir)/lib$(LIBRARYNAME).la
+endif
LibName.A := $(LibDir)/lib$(LIBRARYNAME).a
LibName.O := $(LibDir)/$(LIBRARYNAME).o
LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca
all-local:: $(LibName.LA)
+ifdef LINK_LIBS_IN_SHARED
+ifdef LOADABLE_MODULE
+SharedLibKindMessage := "Loadable Module"
+else
+SharedLibKindMessage := "Shared Library"
+endif
+$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
+ $(Echo) Linking $(BuildMode) $(SharedLibKindMessage) \
+ $(LIBRARYNAME)$(SHLIBEXT)
+ $(Verb) $(LTLink) -o $@ $(ObjectsLO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions)
+ $(Verb) $(LTInstall) $@ $(LibDir)
+else
$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
- $(Verb) $(Link) -o $@ $(ObjectsLO)
+ $(Verb) $(LTLink) -o $@ $(ObjectsLO)
$(Verb) $(LTInstall) $@ $(LibDir)
+endif
clean-local::
ifneq ($(strip $(LibName.LA)),)
-$(Verb) $(RM) -f $(LibName.LA)
endif
-DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
+DestSharedLib = $(PROJ_libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
install-local:: $(DestSharedLib)
-$(DestSharedLib): $(libdir) $(LibName.LA)
+$(DestSharedLib): $(PROJ_libdir) $(LibName.LA)
$(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib)
$(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib)
- $(Verb) $(LIBTOOL) --finish $(libdir)
+ $(Verb) $(LIBTOOL) --finish $(PROJ_libdir)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
- -$(Verb) $(RM) -f $(libdir)/lib$(LIBRARYNAME).*
-
+ -$(Verb) $(RM) -f $(PROJ_libdir)/lib$(LIBRARYNAME).*
+endif
endif
#---------------------------------------------------------
# targets for building them.
#---------------------------------------------------------
ifdef BYTECODE_LIBRARY
-
-# make the C and C++ compilers strip debug info out of bytecode libraries.
-BCCompile.C += -Wa,-strip-debug
-BCCompile.CXX += -Wa,-strip-debug
+ifeq ($(strip $(LLVMGCC)),)
+$(warning Bytecode libraries require llvm-gcc which could not be found ****)
+else
all-local:: $(LibName.BCA)
ifdef EXPORTED_SYMBOL_FILE
-BCLinkLib = $(LLVMGCC) -shared -nostdlib -Xlinker \
- -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+BCLinkLib = $(LLVMLD) -L$(CFERuntimeLibDir) \
+ -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
-$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(LLVMLD) \
$(LLVMToolDir)/llvm-ar
$(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \
"(internalize)"
ifdef BYTECODE_DESTINATION
BytecodeDestDir := $(BYTECODE_DESTINATION)
else
-BytecodeDestDir := $(libdir)
+BytecodeDestDir := $(PROJ_libdir)
endif
DestBytecodeLib = $(BytecodeDestDir)/lib$(LIBRARYNAME).a
install-bytecode-local:: $(DestBytecodeLib)
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
install-local:: $(DestBytecodeLib)
$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA)
$(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib)
- $(Verb) $(INSTALL) $(LibName.BCA) $@
+ $(Verb) $(DataInstall) $(LibName.BCA) $(DestBytecodeLib)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib)
-$(Verb) $(RM) -f $(DestBytecodeLib)
-
+endif
+endif
endif
#---------------------------------------------------------
# ReLinked Library Targets:
-# If the user didn't explicitly forbid building a
-# relinked then we provide targets for building them.
+# If the user explicitly requests a relinked library with
+# BUILD_RELINKED, provide it. Otherwise, if they specify
+# neither of BUILD_ARCHIVE or DONT_BUILD_RELINKED, give
+# them one.
#---------------------------------------------------------
+ifndef BUILD_ARCHIVE
ifndef DONT_BUILD_RELINKED
+BUILD_RELINKED = 1
+endif
+endif
+
+ifdef BUILD_RELINKED
all-local:: $(LibName.O)
$(LibName.O): $(ObjectsO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Object Library $(notdir $@)
- $(Verb) $(Relink) -o $@ $(ObjectsO)
+ $(Verb) $(LTRelink) -o $@ $(ObjectsO)
clean-local::
ifneq ($(strip $(LibName.O)),)
-$(Verb) $(RM) -f $(LibName.O)
endif
-DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
+DestRelinkedLib = $(PROJ_libdir)/$(LIBRARYNAME).o
install-local:: $(DestRelinkedLib)
-$(DestRelinkedLib): $(libdir) $(LibName.O)
+$(DestRelinkedLib): $(PROJ_libdir) $(LibName.O)
$(Echo) Installing $(BuildMode) Object Library $(DestRelinkedLib)
$(Verb) $(LTInstall) $(LibName.O) $(DestRelinkedLib)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Object Library $(DestRelinkedLib)
-$(Verb) $(RM) -f $(DestRelinkedLib)
-
+endif
endif
#---------------------------------------------------------
-$(Verb) $(RM) -f $(LibName.A)
endif
-DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
+DestArchiveLib := $(PROJ_libdir)/lib$(LIBRARYNAME).a
install-local:: $(DestArchiveLib)
-$(DestArchiveLib): $(libdir) $(LibName.A)
+$(DestArchiveLib): $(PROJ_libdir) $(LibName.A)
$(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib)
- $(Verb) $(MKDIR) $(libdir)
+ $(Verb) $(MKDIR) $(PROJ_libdir)
$(Verb) $(LTInstall) $(LibName.A) $(DestArchiveLib)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) Archive Library $(DestArchiveLib)
-$(Verb) $(RM) -f $(DestArchiveLib)
-
+endif
endif
# endif LIBRARYNAME
ifdef TOOLNAME
-#---------------------------------------------------------
-# Handle the special "JIT" value for LLVM_LIBS which is a
-# shorthand for a bunch of libraries that get the correct
-# JIT support for a tool that runs JIT.
-#---------------------------------------------------------
-ifeq ($(LLVMLIBS),JIT)
-
-# Make sure we can get our own symbols in the tool
-Link += -dlopen self
-
-# Generic JIT libraries
-JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
-
-# You can enable the X86 JIT on a non-X86 host by setting the flag
-# ENABLE_X86_JIT on the make command line. If not, it will still be
-# enabled automagically on an X86 host.
-ifeq ($(ARCH), x86)
- ENABLE_X86_JIT = 1
-endif
-
-# What the X86 JIT requires
-ifdef ENABLE_X86_JIT
- JIT_LIBS += LLVMX86 LLVMSelectionDAG
-endif
-
-# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
-# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
-# enabled automagically on an SparcV9 host.
-ifeq ($(ARCH), Sparc)
- ENABLE_SPARCV9_JIT = 1
-endif
-
-# What the Sparc JIT requires
-ifdef ENABLE_SPARCV9_JIT
- JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
- LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \
- LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
- LLVMDataStructure.a LLVMSparcV9RegAlloc
-endif
-
-# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
-# ENABLE_PPC_JIT on the make command line. If not, it will still be
-# enabled automagically on an PowerPC host.
-ifeq ($(ARCH), PowerPC)
- ENABLE_PPC_JIT = 1
-endif
-
-# What the PowerPC JIT requires
-ifdef ENABLE_PPC_JIT
- JIT_LIBS += LLVMPowerPC
-endif
-
-LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \
- LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
- LLVMSystem.a $(PLATFORMLIBDL)
-endif
-
#---------------------------------------------------------
# Set up variables for building a tool.
#---------------------------------------------------------
ifdef EXAMPLE_TOOL
-ToolBuildPath := $(ExmplDir)/$(TOOLNAME)$(EXEEXT)
+ToolBuildPath := $(ExmplDir)/$(strip $(TOOLNAME))$(EXEEXT)
else
-ToolBuildPath := $(ToolDir)/$(TOOLNAME)$(EXEEXT)
+ToolBuildPath := $(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT)
endif
-ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
-LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
-LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
-ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
-LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
-
-#---------------------------------------------------------
-# Tell make that we need to rebuild subdirectories before
-# we can link the tool. This affects things like LLI which
-# has library subdirectories.
-#---------------------------------------------------------
-$(ToolBuildPath): $(addsuffix /.makeall, $(PARALLEL_DIRS))
#---------------------------------------------------------
# Provide targets for building the tools
$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
- $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
- $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB)
- $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) $(StripWarnMsg)
+ $(Verb) $(LTLink) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
+ $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
+ $(StripWarnMsg)
-DestTool = $(bindir)/$(TOOLNAME)
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
+DestTool = $(PROJ_bindir)/$(TOOLNAME)
install-local:: $(DestTool)
-$(DestTool): $(bindir) $(ToolBuildPath)
+$(DestTool): $(PROJ_bindir) $(ToolBuildPath)
$(Echo) Installing $(BuildMode) $(DestTool)
- $(Verb) $(INSTALL) $(ToolBuildPath) $(DestTool)
+ $(Verb) $(ProgInstall) $(ToolBuildPath) $(DestTool)
uninstall-local::
$(Echo) Uninstalling $(BuildMode) $(DestTool)
-$(Verb) $(RM) -f $(DestTool)
-
+endif
endif
###############################################################################
# Object Build Rules: Build object files based on sources
###############################################################################
+# FIXME: This should be checking for "if not GCC or ICC", not for "if HP-UX"
+ifeq ($(OS),HP-UX)
+ DISABLE_AUTO_DEPENDENCIES=1
+endif
+
+ifdef SHARED_LIBRARY
+PIC_FLAG = "(PIC)"
+MAYBE_PIC_Compile.CXX = $(LTCompile.CXX)
+MAYBE_PIC_Compile.C = $(LTCompile.C)
+else
+MAYBE_PIC_Compile.CXX = $(Compile.CXX)
+MAYBE_PIC_Compile.C = $(Compile.C)
+endif
+
# Provide rule sets for when dependency generation is enabled
ifndef DISABLE_AUTO_DEPENDENCIES
#---------------------------------------------------------
# Create .lo files in the ObjDir directory from the .cpp and .c files...
#---------------------------------------------------------
-ifdef SHARED_LIBRARY
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
- $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build " $(PIC_FLAG)
+ $(Verb) if $(MAYBE_PIC_Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ;\
+ then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
+
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
+ $(Verb) if $(MAYBE_PIC_Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ;\
then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
- $(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
+ $(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
+ $(Verb) if $(MAYBE_PIC_Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACd"; exit 1; fi
#---------------------------------------------------------
-# Create .o files in the ObjDir directory from the .cpp and .c files...
+# Create .bc files in the ObjDir directory from .cpp .cc and .c files...
#---------------------------------------------------------
-else
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
- $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
- then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
- else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
-
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build"
- $(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \
- then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \
- else $(RM) -f "$(ObjDir)/$*.Cd"; exit 1; fi
-
-endif
-
-#---------------------------------------------------------
-# Create .bc files in the ObjDir directory from .cpp and .c files...
-#---------------------------------------------------------
-$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \
+ $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" \
+ $< -o $@ -S -emit-llvm ; \
+ then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
+ else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
+
+$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
+ $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" \
+ $< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
-$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
+$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGCC)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
- $(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \
+ $(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" \
+ $< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCd"; exit 1; fi
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
# Provide alternate rule sets if dependencies are disabled
else
-ifdef SHARED_LIBRARY
-
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
- $(LTCompile.CXX) $< -o $@
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@
+
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
- $(LTCompile.C) $< -o $@
+ $(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.C) $< -o $@
-else
+$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
+ $(BCCompile.CXX) $< -o $@ -S -emit-llvm
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
+
+$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
+ $(BCCompile.CXX) $< -o $@ -S -emit-llvm
+ $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_LL,$@)
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
- $(Compile.CXX) $< -o $@
+$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGCC)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
+ $(BCCompile.C) $< -o $@ -S -emit-llvm
+ $(call UPGRADE_MSG,@)
+ $(call UPGRADE_LL,@)
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
- $(Compile.C) $< -o $@
endif
-$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
- $(BCCompile.CXX) $< -o $@
-$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
- $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
- $(BCCompile.C) $< -o $@
+## Rules for building preprocessed (.i/.ii) outputs.
+$(BuildMode)/%.ii: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp for $(BuildMode) build to .ii file"
+ $(Verb) $(Preprocess.CXX) $< -o $@
+
+$(BuildMode)/%.ii: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc for $(BuildMode) build to .ii file"
+ $(Verb) $(Preprocess.CXX) $< -o $@
+
+$(BuildMode)/%.i: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build to .i file"
+ $(Verb) $(Preprocess.C) $< -o $@
+
+
+$(ObjDir)/%.s: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cpp to asm for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@ -S
+$(ObjDir)/%.s: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.cc to asm for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.CXX) $< -o $@ -S
+
+$(ObjDir)/%.s: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c to asm for $(BuildMode) build" $(PIC_FLAG)
+ $(MAYBE_PIC_Compile.C) $< -o $@ -S
+
+
+# make the C and C++ compilers strip debug info out of bytecode libraries.
+ifdef DEBUG_RUNTIME
+$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(LLVMAS) $(LOPT)
+ $(Echo) "Compiling $*.ll to $*.bc for $(BuildMode) build (bytecode)"
+ $(Verb) $(LLVMAS) $< -o - | $(LOPT) -std-compile-opts -o $@ -f
+else
+$(ObjectsBC): $(ObjDir)/%.bc: $(ObjDir)/%.ll $(LLVMAS) $(LOPT)
+ $(Echo) "Compiling $*.ll to $*.bc for $(BuildMode) build (bytecode)"
+ $(Verb) $(LLVMAS) $< -o - | \
+ $(LOPT) -std-compile-opts -strip-debug -o $@ -f
endif
+
#---------------------------------------------------------
# Provide rule to build .bc files from .ll sources,
# regardless of dependencies
ifdef TARGET
-TDFiles := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
+TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) \
+ $(LLVM_SRC_ROOT)/lib/Target/Target.td \
+ $(LLVM_SRC_ROOT)/lib/Target/TargetCallingConv.td \
+ $(LLVM_SRC_ROOT)/lib/Target/TargetSelectionDAG.td \
+ $(LLVM_SRC_ROOT)/include/llvm/CodeGen/ValueTypes.td) \
+ $(wildcard $(LLVM_SRC_ROOT)/include/llvm/Intrinsics*.td)
INCFiles := $(filter %.inc,$(BUILT_SOURCES))
INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
.PRECIOUS: $(INCTMPFiles) $(INCFiles)
# All of these files depend on tblgen and the .td files.
$(INCTMPFiles) : $(TBLGEN) $(TDFiles)
+# INCFiles rule: All of the tblgen generated files are emitted to
+# $(ObjDir)/%.inc.tmp, instead of emitting them directly to %.inc. This allows
+# us to only "touch" the real file if the contents of it change. IOW, if
+# tblgen is modified, all of the .inc.tmp files are regereated, but no
+# dependencies of the .inc files are, unless the contents of the .inc file
+# changes.
+$(INCFiles) : %.inc : $(ObjDir)/%.inc.tmp
+ $(Verb) $(CMP) -s $@ $< || $(CP) $< $@
$(TARGET:%=$(ObjDir)/%GenRegisterNames.inc.tmp): \
$(ObjDir)/%GenRegisterNames.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register names with tblgen"
$(Verb) $(TableGen) -gen-register-enums -o $@ $<
-$(TARGET:%=%GenRegisterNames.inc): \
-%GenRegisterNames.inc : $(ObjDir)/%GenRegisterNames.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
-
$(TARGET:%=$(ObjDir)/%GenRegisterInfo.h.inc.tmp): \
$(ObjDir)/%GenRegisterInfo.h.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register information header with tblgen"
$(Verb) $(TableGen) -gen-register-desc-header -o $@ $<
-$(TARGET:%=%GenRegisterInfo.h.inc): \
-%GenRegisterInfo.h.inc : $(ObjDir)/%GenRegisterInfo.h.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
-
$(TARGET:%=$(ObjDir)/%GenRegisterInfo.inc.tmp): \
$(ObjDir)/%GenRegisterInfo.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register info implementation with tblgen"
$(Verb) $(TableGen) -gen-register-desc -o $@ $<
-$(TARGET:%=%GenRegisterInfo.inc): \
-%GenRegisterInfo.inc : $(ObjDir)/%GenRegisterInfo.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
-
$(TARGET:%=$(ObjDir)/%GenInstrNames.inc.tmp): \
$(ObjDir)/%GenInstrNames.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) instruction names with tblgen"
$(Verb) $(TableGen) -gen-instr-enums -o $@ $<
-$(TARGET:%=%GenInstrNames.inc): \
-%GenInstrNames.inc : $(ObjDir)/%GenInstrNames.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
-
$(TARGET:%=$(ObjDir)/%GenInstrInfo.inc.tmp): \
$(ObjDir)/%GenInstrInfo.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) instruction information with tblgen"
$(Verb) $(TableGen) -gen-instr-desc -o $@ $<
-$(TARGET:%=%GenInstrInfo.inc): \
-%GenInstrInfo.inc : $(ObjDir)/%GenInstrInfo.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
-
$(TARGET:%=$(ObjDir)/%GenAsmWriter.inc.tmp): \
$(ObjDir)/%GenAsmWriter.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) assembly writer with tblgen"
$(Verb) $(TableGen) -gen-asm-writer -o $@ $<
-$(TARGET:%=%GenAsmWriter.inc): \
-%GenAsmWriter.inc : $(ObjDir)/%GenAsmWriter.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
$(TARGET:%=$(ObjDir)/%GenAsmWriter1.inc.tmp): \
$(ObjDir)/%GenAsmWriter1.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) assembly writer #1 with tblgen"
$(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $<
-$(TARGET:%=%GenAsmWriter1.inc): \
-%GenAsmWriter1.inc : $(ObjDir)/%GenAsmWriter1.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
-
-
$(TARGET:%=$(ObjDir)/%GenCodeEmitter.inc.tmp): \
$(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) code emitter with tblgen"
$(Verb) $(TableGen) -gen-emitter -o $@ $<
-$(TARGET:%=%GenCodeEmitter.inc): \
-%GenCodeEmitter.inc : $(ObjDir)/%GenCodeEmitter.inc.tmp
- $(Verb) cmp -s $@ $< || cp $< $@
+$(TARGET:%=$(ObjDir)/%GenDAGISel.inc.tmp): \
+$(ObjDir)/%GenDAGISel.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) instruction selector implementation with tblgen"
+ $(Verb) $(TableGen) -gen-dag-isel -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenSubtarget.inc.tmp): \
+$(ObjDir)/%GenSubtarget.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) subtarget information with tblgen"
+ $(Verb) $(TableGen) -gen-subtarget -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenCallingConv.inc.tmp): \
+$(ObjDir)/%GenCallingConv.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) calling convention information with tblgen"
+ $(Verb) $(TableGen) -gen-callingconv -o $@ $<
clean-local::
-$(Verb) $(RM) -f $(INCFiles)
ifneq ($(LexFiles),)
-LexOutput := $(strip $(patsubst %.l,%.cpp,$(LexFiles)))
+# Cancel built-in rules for lex
+%.c: %.l
+%.cpp: %.l
-.PRECIOUS: $(LexOutput)
+all:: $(LexFiles:%.l=$(PROJ_SRC_DIR)/%.cpp.cvs)
# Note the extra sed filtering here, used to cut down on the warnings emited
# by GCC. The last line is a gross hack to work around flex aparently not
# uninitialized string buffers in LLVM we can generate very long tokens, so
# this is a hack around it.
# FIXME. (f.e. char Buffer[10000] )
-%.cpp: %.l
+$(PROJ_SRC_DIR)/%.cpp: $(PROJ_SRC_DIR)/%.l
$(Echo) Flexing $*.l
- $(Verb) $(FLEX) -t $< | \
+ $(Verb) $(FLEX) -t $(PROJ_SRC_DIR)/$*.l | \
$(SED) 's/void yyunput/inline void yyunput/' | \
$(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
$(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
- > $@
+ > $(PROJ_SRC_DIR)/$*.cpp
+
+# IFF the .l file has changed since it was last checked into CVS, copy the .l
+# file to .l.cvs and the generated .cpp file to .cpp.cvs. We use this mechanism
+# so that people without flex can build LLVM by copying the .cvs files to the
+# source location and building them.
+$(LexFiles:%.l=$(PROJ_SRC_DIR)/%.cpp.cvs): \
+$(PROJ_SRC_DIR)/%.cpp.cvs: $(PROJ_SRC_DIR)/%.cpp
+ $(Verb) $(CMP) -s $(PROJ_SRC_DIR)/$*.l $(PROJ_SRC_DIR)/$*.l.cvs || \
+ ($(CP) $< $@; $(CP) $(PROJ_SRC_DIR)/$*.l $(PROJ_SRC_DIR)/$*.l.cvs)
+
+$(LexFiles:%.l=$(ObjDir)/%.o) : \
+$(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
clean-local::
-$(Verb) $(RM) -f $(LexOutput)
- $(Verb) $(RM) -f $(LexOutput)
endif
YaccFiles := $(filter %.y,$(Sources))
ifneq ($(YaccFiles),)
-YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.h .cpp .output)
.PRECIOUS: $(YaccOutput)
+all:: $(YaccFiles:%.y=$(PROJ_SRC_DIR)/%.cpp.cvs)
+
# Cancel built-in rules for yacc
%.c: %.y
%.cpp: %.y
%.h: %.y
-# Rule for building the bison parsers...
-%.cpp %.h : %.y
+# Rule for building the bison based parsers...
+$(PROJ_SRC_DIR)/%.cpp $(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.y
+ifneq ($(BISON),)
$(Echo) "Bisoning $*.y"
- $(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
- $(Verb) $(MV) -f $*.tab.c $*.cpp
- $(Verb) $(MV) -f $*.tab.h $*.h
+ $(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
+ $(Verb) $(MV) -f $*.tab.c $(PROJ_SRC_DIR)/$*.cpp
+ $(Verb) $(MV) -f $*.tab.h $(PROJ_SRC_DIR)/$*.h
+else
+ $(Echo) "Bison of $*.y SKIPPED -- bison not found"
+endif
+
+# IFF the .y file has changed since it was last checked into CVS, copy the .y
+# file to .y.cvs and the generated .cpp/.h file to .cpp.cvs/.h.cvs. We use this
+# mechanism so that people without flex can build LLVM by copying the .cvs files
+# to the source location and building them.
+$(YaccFiles:%.y=$(PROJ_SRC_DIR)/%.cpp.cvs): \
+$(PROJ_SRC_DIR)/%.cpp.cvs: $(PROJ_SRC_DIR)/%.cpp
+ $(Verb) $(CMP) -s $(PROJ_SRC_DIR)/$*.y $(PROJ_SRC_DIR)/$*.y.cvs || \
+ ($(CP) $< $@; \
+ $(CP) $(PROJ_SRC_DIR)/$*.y $(PROJ_SRC_DIR)/$*.y.cvs; \
+ $(CP) $(PROJ_SRC_DIR)/$*.h $(PROJ_SRC_DIR)/$*.h.cvs)
+
+
+$(YaccFiles:%.y=$(ObjDir)/%.o): $(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
+
+YaccOutput := $(YaccFiles:%.y=%.output)
clean-local::
-$(Verb) $(RM) -f $(YaccOutput)
- $(Verb) $(RM) -f $(YaccOutput)
endif
###############################################################################
# which they can be "generated." This allows make to ignore them and
# reproduce the dependency lists.
%.h:: ;
+%.hpp:: ;
# Define clean-local to clean the current directory. Note that this uses a
# very conservative approach ensuring that empty variables do not cause
tags:: TAGS CTAGS
TAGS:
- find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
- $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
- $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
- $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \
+ $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \
+ $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \
+ $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \
-name '*.cpp' -o -name '*.h' | \
$(ETAGS) $(ETAGSFLAGS) -
CTAGS:
- find $(BUILD_SRC_ROOT)/include $(BUILD_SRC_ROOT)/lib \
- $(BUILD_SRC_ROOT)/tools $(BUILD_SRC_ROOT)/examples \
- $(BUILD_OBJ_ROOT)/include $(BUILD_OBJ_ROOT)/lib \
- $(BUILD_OBJ_ROOT)/tools $(BUILD_OBJ_ROOT)/examples \
+ find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \
+ $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \
+ $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \
+ $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \
\( -name '*.cpp' -o -name '*.h' \) -print | \
- ctags -ImtT -o $(BUILD_OBJ_ROOT)/CTAGS -L -
+ ctags -ImtT -o $(PROJ_OBJ_ROOT)/CTAGS -L -
###############################################################################
ifndef DISABLE_AUTO_DEPENDENCIES
# If its not one of the cleaning targets
-ifneq ($strip($(filter-out clean clean-local dist-clean,$(MAKECMDGOALS))),)
+ifneq ($(strip $(filter-out clean clean-local dist-clean,$(MAKECMDGOALS)))),)
# Get the list of dependency files
DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources)))
-DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles))
+DependFiles := $(DependFiles:%=$(PROJ_OBJ_DIR)/$(BuildMode)/%.d)
-include /dev/null $(DependFiles)
###############################################################################
check::
- $(Verb) if test -d "$(BUILD_OBJ_ROOT)/test" ; then \
- if test -f "$(BUILD_OBJ_ROOT)/test/Makefile" ; then \
+ $(Verb) if test -d "$(PROJ_OBJ_ROOT)/test" ; then \
+ if test -f "$(PROJ_OBJ_ROOT)/test/Makefile" ; then \
$(EchoCmd) Running test suite ; \
- $(MAKE) -C $(BUILD_OBJ_ROOT)/test check-local \
+ $(MAKE) -C $(PROJ_OBJ_ROOT)/test check-local \
TESTSUITE=$(TESTSUITE) ; \
else \
$(EchoCmd) No Makefile in test directory ; \
#------------------------------------------------------------------------
# Define distribution related variables
#------------------------------------------------------------------------
-DistName := $(LLVM_TARBALL_NAME)
-DistDir := $(BUILD_OBJ_ROOT)/$(DistName)
-TopDistDir := $(BUILD_OBJ_ROOT)/$(DistName)
-DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz
-DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip
-DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2
+DistName := $(PROJECT_NAME)-$(PROJ_VERSION)
+DistDir := $(PROJ_OBJ_ROOT)/$(DistName)
+TopDistDir := $(PROJ_OBJ_ROOT)/$(DistName)
+DistTarGZip := $(PROJ_OBJ_ROOT)/$(DistName).tar.gz
+DistZip := $(PROJ_OBJ_ROOT)/$(DistName).zip
+DistTarBZ2 := $(PROJ_OBJ_ROOT)/$(DistName).tar.bz2
DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \
ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \
Makefile.config.in configure autoconf
DistOther := $(notdir $(wildcard \
- $(BUILD_SRC_DIR)/*.h \
- $(BUILD_SRC_DIR)/*.td \
- $(BUILD_SRC_DIR)/*.def \
- $(BUILD_SRC_DIR)/*.ll \
- $(BUILD_SRC_DIR)/*.in))
+ $(PROJ_SRC_DIR)/*.h \
+ $(PROJ_SRC_DIR)/*.td \
+ $(PROJ_SRC_DIR)/*.def \
+ $(PROJ_SRC_DIR)/*.ll \
+ $(PROJ_SRC_DIR)/*.in))
DistSubDirs := $(SubDirs)
DistSources = $(Sources) $(EXTRA_DIST)
DistFiles = $(DistAlways) $(DistSources) $(DistOther)
#------------------------------------------------------------------------
# We MUST build distribution with OBJ_DIR != SRC_DIR
#------------------------------------------------------------------------
-ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR))
+ifeq ($(PROJ_SRC_DIR),$(PROJ_OBJ_DIR))
dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
$(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR
else
-#------------------------------------------------------------------------
-# Prevent catastrophic remove
-#------------------------------------------------------------------------
-ifeq ($(LLVM_TARBALL_NAME),)
-$(error LLVM_TARBALL_NAME is empty. Please rerun configure)
-endif
-
#------------------------------------------------------------------------
# Prevent attempt to run dist targets from anywhere but the top level
#------------------------------------------------------------------------
ifneq ($(LEVEL),.)
-
dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip ::
- $(Echo) ERROR: You must run $@ from $(BUILD_OBJ_ROOT)
-
+ $(Echo) ERROR: You must run $@ from $(PROJ_OBJ_ROOT)
else
#------------------------------------------------------------------------
$(DistTarGZip) : $(TopDistDir)/.makedistdir
$(Echo) Packing gzipped distribution tar file.
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \
$(GZIP) -c > "$(DistTarGZip)"
dist-bzip2:: $(DistTarBZ2)
$(DistTarBZ2) : $(TopDistDir)/.makedistdir
$(Echo) Packing bzipped distribution tar file.
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \
$(BZIP2) -c >$(DistTarBZ2)
dist-zip:: $(DistZip)
$(DistZip) : $(TopDistDir)/.makedistdir
$(Echo) Packing zipped distribution file.
$(Verb) rm -f $(DistZip)
- $(Verb) cd $(BUILD_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
+ $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
$(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL =====
-DistCheckDir := $(LLVM_OBJ_ROOT)/_distcheckdir
+DistCheckDir := $(PROJ_OBJ_ROOT)/_distcheckdir
dist-check:: $(DistTarGZip)
$(Echo) Checking distribution tar file.
gunzip -c $(DistTarGZip) | $(TAR) xf - && \
cd build && \
../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
- --srcdir=../$(DistName) --with-llvmgccdir="$(LLVMGCCDIR)" && \
+ --srcdir=../$(DistName) $(DIST_CHECK_CONFIG_OPTIONS) && \
$(MAKE) all && \
$(MAKE) check && \
$(MAKE) install && \
$(MAKE) uninstall && \
- $(MAKE) dist && \
- $(MAKE) clean && \
$(MAKE) dist-clean && \
$(EchoCmd) ===== $(DistTarGZip) Ready For Distribution =====
$(EchoCmd) Removing old $(DistDir) ; \
$(RM) -rf $(DistDir); \
$(EchoCmd) Making 'all' to verify build ; \
- $(MAKE) all ; \
+ $(MAKE) ENABLE_OPTIMIZED=1 all ; \
fi
$(Echo) Building Distribution Directory $(DistDir)
$(Verb) $(MKDIR) $(DistDir)
- $(Verb) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \
- srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \
+ $(Verb) srcdirstrip=`echo "$(PROJ_SRC_DIR)" | sed 's|.|.|g'`; \
+ srcrootstrip=`echo "$(PROJ_SRC_ROOT)" | sed 's|.|.|g'`; \
for file in $(DistFiles) ; do \
case "$$file" in \
- $(BUILD_SRC_DIR)/*) \
+ $(PROJ_SRC_DIR)/*) \
file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \
;; \
- $(BUILD_SRC_ROOT)/*) \
+ $(PROJ_SRC_ROOT)/*) \
file=`echo "$$file" | \
sed "s#^$$srcrootstrip/##"` \
;; \
esac; \
- if test -f "$(BUILD_SRC_DIR)/$$file" || \
- test -d "$(BUILD_SRC_DIR)/$$file" ; then \
- from_dir="$(BUILD_SRC_DIR)" ; \
+ if test -f "$(PROJ_SRC_DIR)/$$file" || \
+ test -d "$(PROJ_SRC_DIR)/$$file" ; then \
+ from_dir="$(PROJ_SRC_DIR)" ; \
elif test -f "$$file" || test -d "$$file" ; then \
from_dir=. ; \
fi ; \
$(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \
fi ; \
if test -d "$$from_dir/$$file"; then \
- if test -d "$(BUILD_SRC_DIR)/$$file" && \
- test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \
- cp -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ if test -d "$(PROJ_SRC_DIR)/$$file" && \
+ test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \
+ cd $(PROJ_SRC_DIR) ; \
+ $(TAR) cf - $$file --exclude .svn --exclude CVS | \
+ ( cd $$to_dir ; $(TAR) xf - ) ; \
+ cd $(PROJ_OBJ_DIR) ; \
+ else \
+ cd $$from_dir ; \
+ $(TAR) cf - $$file --exclude .svn --exclude CVS | \
+ ( cd $$to_dir ; $(TAR) xf - ) ; \
+ cd $(PROJ_OBJ_DIR) ; \
fi; \
- cp -pR $$from_dir/$$file $$to_dir || exit 1; \
elif test -f "$$from_dir/$$file" ; then \
- cp -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
+ $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
elif test -L "$$from_dir/$$file" ; then \
- cp -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
+ $(CP) -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \
$(EchoCmd) "===== WARNING: Distribution Source " \
"$$from_dir/$$file Not Found!" ; \
if test "$$subdir" \!= "." ; then \
new_distdir="$(DistDir)/$$subdir" ; \
test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
- ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \
- exit 1; \
+ ( cd $$subdir && $(MAKE) ENABLE_OPTIMIZED=1 \
+ DistDir="$$new_distdir" distdir ) || exit 1; \
fi; \
done
$(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
- $(EchoCmd) Eliminating CVS directories from distribution ; \
- $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\
+ $(EchoCmd) Eliminating CVS/.svn directories from distribution ; \
+ $(RM) -rf `find $(TopDistDir) -type d \( -name CVS -o \
+ -name .svn \) -print` ;\
$(MAKE) dist-hook ; \
$(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \
-o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \
#------------------------------------------------------------------------
# Install support for the project's include files:
#------------------------------------------------------------------------
+ifdef NO_INSTALL
+install-local::
+ $(Echo) Install circumvented with NO_INSTALL
+uninstall-local::
+ $(Echo) Uninstall circumvented with NO_INSTALL
+else
install-local::
$(Echo) Installing include files
- $(Verb) $(MKDIR) $(includedir)
- $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
- cd $(BUILD_SRC_ROOT)/include && \
- find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
- -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \
+ $(Verb) $(MKDIR) $(PROJ_includedir)
+ $(Verb) if test -d "$(PROJ_SRC_ROOT)/include" ; then \
+ cd $(PROJ_SRC_ROOT)/include && \
+ for hdr in `find . -type f '!' '(' -name '*~' -o -name '.cvsignore' \
+ -o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS ` ; do \
+ instdir=`dirname "$(PROJ_includedir)/$$hdr"` ; \
+ if test \! -d "$$instdir" ; then \
+ $(EchoCmd) Making install directory $$instdir ; \
+ $(MKDIR) $$instdir ;\
+ fi ; \
+ $(DataInstall) $$hdr $(PROJ_includedir)/$$hdr ; \
+ done ; \
+ fi
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
+ $(Verb) if test -d "$(PROJ_OBJ_ROOT)/include" ; then \
+ cd $(PROJ_OBJ_ROOT)/include && \
+ for hdr in `find . -type f -print | grep -v CVS` ; do \
+ $(DataInstall) $$hdr $(PROJ_includedir)/$$hdr ; \
+ done ; \
fi
+endif
uninstall-local::
$(Echo) Uninstalling include files
- $(Verb) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \
- cd $(BUILD_SRC_ROOT)/include && \
+ $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
+ cd $(PROJ_SRC_ROOT)/include && \
$(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \
- -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \
- fi
-
+ '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' \
+ -o -name '*.in' ')' -print ')' | \
+ grep -v CVS | sed 's#^#$(PROJ_includedir)/#'` ; \
+ cd $(PROJ_SRC_ROOT)/include && \
+ $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f -name '*.in' \
+ -print ')' | sed 's#\.in$$##;s#^#$(PROJ_includedir)/#'` ; \
+ fi
+endif
endif
#------------------------------------------------------------------------
# Print out the directories used for building
#------------------------------------------------------------------------
printvars::
- $(Echo) "BuildMode : " '$(BuildMode)'
- $(Echo) "BUILD_SRC_ROOT : " '$(BUILD_SRC_ROOT)'
- $(Echo) "BUILD_SRC_DIR : " '$(BUILD_SRC_DIR)'
- $(Echo) "BUILD_OBJ_ROOT : " '$(BUILD_OBJ_ROOT)'
- $(Echo) "BUILD_OBJ_DIR : " '$(BUILD_OBJ_DIR)'
- $(Echo) "LLVM_SRC_ROOT : " '$(LLVM_SRC_ROOT)'
- $(Echo) "LLVM_OBJ_ROOT : " '$(LLVM_OBJ_ROOT)'
- $(Echo) "libdir : " '$(libdir)'
- $(Echo) "bindir : " '$(bindir)'
- $(Echo) "sysconfdir : " '$(sysconfdir)'
- $(Echo) "UserTargets : " '$(UserTargets)'
- $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
- $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
- $(Echo) "ObjDir : " '$(ObjDir)'
- $(Echo) "LibDir : " '$(LibDir)'
- $(Echo) "ToolDir : " '$(ToolDir)'
- $(Echo) "ExmplDir : " '$(ExmplDir)'
- $(Echo) "Sources : " '$(Sources)'
- $(Echo) "TDFiles : " '$(TDFiles)'
- $(Echo) "INCFiles : " '$(INCFiles)'
- $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
- $(Echo) "Compile.CXX : " '$(Compile.CXX)'
- $(Echo) "Compile.C : " '$(Compile.C)'
- $(Echo) "Archive : " '$(Archive)'
- $(Echo) "YaccFiles : " '$(YaccFiles)'
- $(Echo) "LexFiles : " '$(LexFiles)'
- $(Echo) "Module : " '$(Module)'
+ $(Echo) "BuildMode : " '$(BuildMode)'
+ $(Echo) "PROJ_SRC_ROOT: " '$(PROJ_SRC_ROOT)'
+ $(Echo) "PROJ_SRC_DIR : " '$(PROJ_SRC_DIR)'
+ $(Echo) "PROJ_OBJ_ROOT: " '$(PROJ_OBJ_ROOT)'
+ $(Echo) "PROJ_OBJ_DIR : " '$(PROJ_OBJ_DIR)'
+ $(Echo) "LLVM_SRC_ROOT: " '$(LLVM_SRC_ROOT)'
+ $(Echo) "LLVM_OBJ_ROOT: " '$(LLVM_OBJ_ROOT)'
+ $(Echo) "PROJ_prefix : " '$(PROJ_prefix)'
+ $(Echo) "PROJ_bindir : " '$(PROJ_bindir)'
+ $(Echo) "PROJ_libdir : " '$(PROJ_libdir)'
+ $(Echo) "PROJ_etcdir : " '$(PROJ_etcdir)'
+ $(Echo) "PROJ_includedir : " '$(PROJ_includedir)'
+ $(Echo) "UserTargets : " '$(UserTargets)'
+ $(Echo) "ObjMakefiles : " '$(ObjMakefiles)'
+ $(Echo) "SrcMakefiles : " '$(SrcMakefiles)'
+ $(Echo) "ObjDir : " '$(ObjDir)'
+ $(Echo) "LibDir : " '$(LibDir)'
+ $(Echo) "ToolDir : " '$(ToolDir)'
+ $(Echo) "ExmplDir : " '$(ExmplDir)'
+ $(Echo) "Sources : " '$(Sources)'
+ $(Echo) "TDFiles : " '$(TDFiles)'
+ $(Echo) "INCFiles : " '$(INCFiles)'
+ $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
+ $(Echo) "PreConditions: " '$(PreConditions)'
+ $(Echo) "Compile.CXX : " '$(Compile.CXX)'
+ $(Echo) "Compile.C : " '$(Compile.C)'
+ $(Echo) "Archive : " '$(Archive)'
+ $(Echo) "YaccFiles : " '$(YaccFiles)'
+ $(Echo) "LexFiles : " '$(LexFiles)'
+ $(Echo) "Module : " '$(Module)'
+ $(Echo) "FilesToConfig: " '$(FilesToConfigPATH)'
+ $(Echo) "SubDirs : " '$(SubDirs)'