-# Makefile.common
+#===-- Makefile.common - Common make rules for LLVM -------*- makefile -*--====
#
# This file is included by all of the LLVM makefiles. This file defines common
# rules to do things like compile a .cpp file or generate dependancy info.
# These are platform dependant, so this is the file used to specify these
# system dependant operations.
#
-# The following functionality may be set by setting incoming variables:
+# The following functionality can be set by setting incoming variables.
+# The variable $(LEVEL) *must* be set:
#
# 1. LEVEL - The level of the current subdirectory from the top of the
# MagicStats view. This level should be expressed as a path, for
# example, ../.. for two levels deep.
#
# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
-# so that each of the targets "all", "install", and "clean" each build.
-# the subdirectories before the local target.
+# so that each of the targets "all", "install", and "clean" each build
+# the subdirectories before the local target. DIRS are guaranteed to be
+# built in order.
#
-# 3. Source - If specified, this sets the source code filenames. If this
+# 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be
+# built in any order. All DIRS are built in order before PARALLEL_DIRS are
+# built, which are then built in any order.
+#
+# 4. Source - If specified, this sets the source code filenames. If this
# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
-# in the current directory.
+# in the current directory. Also, if you want to build files in addition
+# to the local files, you can use the ExtraSource variable
+#
+#===-----------------------------------------------------------------------====
+
+# Configuration file to set paths specific to local installation of LLVM
+#
+include $(LEVEL)/Makefile.config
+
+# These are options that can either be enabled here, or can be enabled on the
+# make command line (ie, make ENABLE_PROFILING=1)
+#
+
+# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
+# information to allow gprof to be used to get execution frequencies.
+#
+#ENABLE_PROFILING = 1
+
+# When ENABLE_PURIFY is enabled, the LLVM tools are linked with purify (which
+# must be locally installed) to allow for some automated memory error debugging.
+#
+#ENABLE_PURIFY = 1
+
+# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
+# turned on, and Debug builds are turned off.
#
+#ENABLE_OPTIMIZED = 1
+
+
+# Figure out how to do platform specific stuff on this platform. This is really
+# gross and should be autoconfiscated (automake actually), but should hopefully
+# work on Linux and solaris (SunOS).
+#
+UNAME := $(shell uname)
+include $(LEVEL)/Makefile.$(UNAME)
+
+ifdef SHARED_LIBRARY
+# if SHARED_LIBRARY is specified, the default is to build the dynamic lib
+dynamic ::
+endif
# Default Rule: Make sure it's also a :: rule
all ::
# Default for install is to at least build everything...
install ::
+
+# Figure out which directory to build stuff into. We want to build into the
+# /shared directory by default because it is guaranteed to be local to the
+# current machine.
+#
+ifeq ($(LLVM_OBJ_DIR),.)
+BUILD_ROOT = $(LLVM_OBJ_DIR)
+BUILD_ROOT_TOP = $(LEVEL)
+else
+
+BUILD_ROOT := $(LLVM_OBJ_DIR)$(patsubst $(HOME)%,%,$(shell pwd))
+
+# Calculate the BUILD_ROOT_TOP variable, which is the top of the llvm/ tree.
+# Note that although this is just equal to $(BUILD_ROOT)/$(LEVEL), we cannot use
+# this expression because some of the directories on the source tree may not
+# exist in the build tree (for example the test/ heirarchy). Thus we evaluate
+# the directory to eliminate the ../'s
+#
+TOP_DIRECTORY := $(shell cd $(LEVEL); pwd)
+BUILD_ROOT_TOP := $(LLVM_OBJ_DIR)$(patsubst $(HOME)%,%,$(TOP_DIRECTORY))
+endif
+
#--------------------------------------------------------------------
-# Installation configuration options...
+# Variables derived from configuration options...
#--------------------------------------------------------------------
#BinInstDir=/usr/local/bin
#LibInstDir=/usrl/local/lib/xxx
#DocInstDir=/usr/doc/xxx
+BURG_OPTS = -I
+
+PURIFY := $(PURIFY) -cache-dir="$(BUILD_ROOT_TOP)/../purifycache" -chain-length="30" -messages=all
+
+# Shorthand for commonly accessed directories
+LIBDEBUG := $(BUILD_ROOT_TOP)/lib/Debug
+LIBRELEASE := $(BUILD_ROOT_TOP)/lib/Release
+LIBPROFILE := $(BUILD_ROOT_TOP)/lib/Profile
+TOOLDEBUG := $(BUILD_ROOT_TOP)/tools/Debug
+TOOLRELEASE := $(BUILD_ROOT_TOP)/tools/Release
+TOOLPROFILE := $(BUILD_ROOT_TOP)/tools/Profile
+
+# Verbosity levels
+ifdef VERBOSE
+VERB :=
+else
+VERB := @
+endif
+
#---------------------------------------------------------
# Compilation options...
#---------------------------------------------------------
-# Add -L options to the link command lines...
-LibPathsO = -L $(LEVEL)/lib/Support/Release \
- -L $(LEVEL)/lib/VMCore/Release \
- -L $(LEVEL)/lib/Assembly/Parser/Release \
- -L $(LEVEL)/lib/Assembly/Writer/Release \
- -L $(LEVEL)/lib/Analysis/Release \
- -L $(LEVEL)/lib/Bytecode/Writer/Release \
- -L $(LEVEL)/lib/Bytecode/Reader/Release \
- -L $(LEVEL)/lib/Optimizations/Release \
- -L $(LEVEL)/lib/CodeGen/InstrSelection/Release \
- -L $(LEVEL)/lib/CodeGen/TargetMachine/Release \
- -L $(LEVEL)/lib/CodeGen/TargetMachine/Sparc/Release \
- -L $(LEVEL)/lib/LLC/Release
+# Special tools used while building the LLVM tree. Burg is built as part of the
+# utils directory.
+#
+BURG := $(TOOLDEBUG)/burg
+RunBurg := $(BURG) $(BURG_OPTS)
+
-LibPathsG = $(LibPathsO:Release=Debug)
+# Enable this for profiling support with 'gprof'
+# This automatically enables optimized builds.
+ifdef ENABLE_PROFILING
+ PROFILE = -pg
+ ENABLE_OPTIMIZED = 1
+else
+ PROFILE =
+endif
+# By default, strip symbol information from executable
+ifdef KEEP_SYMBOLS
+STRIP =
+else
+STRIP = -s
+endif
-# List of libraries in all the directories on LibPathsG/O.
-# Add one of these to the list of dependences for an executable
-# to ensure it is relinked when any of the libs is updated.
-# See llvm/lib/LLC/Makefile for an example.
-LibsO = $(addsuffix /lib*.a,$(subst -L,,$(LibPathsO)))
-LibsG = $(addsuffix /lib*.a,$(subst -L,,$(LibPathsG)))
+# Allow gnu extensions...
+CPPFLAGS += -D_GNU_SOURCE
+# -Wno-unused-parameter
+CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include
-# Enable this for profiling support with 'gprof'
-#Prof = -pg
+# Compile a cpp file, don't link...
+Compile := $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
+CompileG := $(Compile) -g -D_DEBUG
+CompileO := $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fshort-enums ## DISABLE -freg-struct-return because of gcc3.2 bug
+CompileP := $(CompileO) $(PROFILE)
-# TODO: Get rid of exceptions! : -fno-exceptions -fno-rtti
-CompileCommonOpts = $(Prof) -Wall -Winline -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include
+# Compile a c file, don't link...
+CompileC := $(CC) -c $(CPPFLAGS) $(CCFLAGS) $(CompileCommonOpts)
+CompileCG := $(CompileC) -g -D_DEBUG
+CompileCO := $(CompileC) -O3 -DNDEBUG -finline-functions -felide-constructors -fshort-enums ## DISABLE -freg-struct-return because of gcc3.2 bug
+CompileCP := $(CompileCO) $(PROFILE)
-# Compile a file, don't link...
-Compile = $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
-CompileG = $(Compile) -g -D_DEBUG
-# Add This for DebugMalloc: -fno-defer-pop
-CompileO = $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fnonnull-objects -freg-struct-return -fshort-enums
# Link final executable
-Link = $(CXX) $(Prof)
-LinkG = $(Link) -g $(LibPathsG)
-LinkO = $(Link) -O3 $(LibPathsO)
-# Create a .so file from a .cpp file...
-#MakeSO = $(CXX) -shared $(Prof)
-MakeSO = $(CXX) -G $(Prof)
-MakeSOG = $(MakeSO) -g
-MakeSOO = $(MakeSO) -O3
+ifdef ENABLE_PURIFY # To enable purify, build with 'gmake ENABLE_PURIFY=1'
+Link := $(PURIFY) $(CXX) -static
+else
+Link := $(CXX)
+endif
+LinkG := $(Link) -g -L $(LIBDEBUG) $(STRIP)
+LinkO := $(Link) -O3 -L $(LIBRELEASE)
+LinkP := $(Link) -O3 -L $(LIBPROFILE) $(PROFILE)
+
+# Create one .o file from a bunch of .o files...
+Relink = ld -r
+
+# MakeSO - Create a .so file from a .o files...
+MakeSO := $(CXX) $(MakeSharedObjectOption)
+MakeSOO := $(MakeSO) -O3
+MakeSOP := $(MakeSOO) $(PROFILE)
# Create dependancy file from CPP file, send to stdout.
-Depend = $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
+Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
+DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
# Archive a bunch of .o files into a .a file...
AR = ar cq
-MakeLib = $(AR)
+BISON = bison
#----------------------------------------------------------
# Source includes all of the cpp files, and objects are derived from the
# source files...
-ifndef Source
-Source = $(wildcard *.cpp *.c *.y *.l)
-endif
+# The local Makefile can list other Source files via ExtraSource = ...
+#
+Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l)
+
+Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source)))))
+ObjectsO := $(addprefix $(BUILD_ROOT)/Release/,$(Objs))
+ObjectsP := $(addprefix $(BUILD_ROOT)/Profile/,$(Objs))
+ObjectsG := $(addprefix $(BUILD_ROOT)/Debug/,$(Objs))
-Objs = $(sort $(addsuffix .o,$(basename $(Source))))
-ObjectsO = $(addprefix Release/,$(Objs))
-ObjectsG = $(addprefix Debug/,$(Objs))
#---------------------------------------------------------
-# Handle the DIRS option
+# Handle the DIRS and PARALLEL_DIRS options
#---------------------------------------------------------
-ifdef DIRS # Only do this if we're using DIRS!
+ifdef DIRS
+all install clean ::
+ $(VERB) for dir in ${DIRS}; do \
+ (cd $$dir; $(MAKE) $@) || exit 1; \
+ done
+endif
+
+# Handle PARALLEL_DIRS
+ifdef PARALLEL_DIRS
+all :: $(addsuffix /.makeall , $(PARALLEL_DIRS))
+install :: $(addsuffix /.makeinstall, $(PARALLEL_DIRS))
+clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS))
-all :: $(addsuffix /.makeall , $(DIRS))
-install :: $(addsuffix /.makeinstall, $(DIRS))
-clean :: $(addsuffix /.makeclean , $(DIRS))
+%/.makeall %/.makeinstall %/.makeclean:
+ $(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
-%/.makeall %/.makeclean %/.makeinstall:
- cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
endif
#---------------------------------------------------------
# Handle the LIBRARYNAME option - used when building libs...
#---------------------------------------------------------
+#
+# When libraries are built, they are allowed to optionally define the
+# DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file
+# from being built for the library. This .o files may then be linked to by a
+# tool if the tool does not need (or want) the semantics a .a file provides
+# (linking in only object files that are "needed"). If a library is never to
+# be used in this way, it is better to define DONT_BUILD_RELINKED, and define
+# BUILD_ARCHIVE instead.
+#
+# Some libraries must be built as .a files (libscalar for example) because if
+# it's built as a .o file, then all of the constituent .o files in it will be
+# linked into tools (for example gccas) even if they only use one of the parts
+# of it. For this reason, sometimes it's useful to use libraries as .a files.
ifdef LIBRARYNAME
-LIBNAME_O := Release/lib$(LIBRARYNAME).so
-LIBNAME_G := Debug/lib$(LIBRARYNAME).so
-LIBNAME_AO := Release/lib$(LIBRARYNAME).a
-LIBNAME_AG := Debug/lib$(LIBRARYNAME).a
+# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
+LIBRARYNAME := $(strip $(LIBRARYNAME))
+
+LIBNAME_O := $(LIBRELEASE)/lib$(LIBRARYNAME).so
+LIBNAME_P := $(LIBPROFILE)/lib$(LIBRARYNAME).so
+LIBNAME_G := $(LIBDEBUG)/lib$(LIBRARYNAME).so
+LIBNAME_AO := $(LIBRELEASE)/lib$(LIBRARYNAME).a
+LIBNAME_AP := $(LIBPROFILE)/lib$(LIBRARYNAME).a
+LIBNAME_AG := $(LIBDEBUG)/lib$(LIBRARYNAME).a
+LIBNAME_OBJO := $(LIBRELEASE)/$(LIBRARYNAME).o
+LIBNAME_OBJP := $(LIBPROFILE)/$(LIBRARYNAME).o
+LIBNAME_OBJG := $(LIBDEBUG)/$(LIBRARYNAME).o
+
-all:: $(LIBNAME_AG)
-###all:: $(LIBNAME_G)
-# TODO: Enable optimized builds
+ifndef ENABLE_OPTIMIZED
+BUILD_LIBNAME_G := $(LIBNAME_G)
+ifndef DONT_BUILD_RELINKED
+BUILD_LIBNAME_OBJG := $(LIBNAME_OBJG)
+endif
+ifdef BUILD_ARCHIVE
+BUILD_LIBNAME_AG := $(LIBNAME_AG)
+endif
+endif
+
+# If optimized builds are enabled...
+ifdef ENABLE_OPTIMIZED
+ ifdef ENABLE_PROFILING
+ BUILD_LIBNAME_O := $(LIBNAME_P)
+ ifndef DONT_BUILD_RELINKED
+ BUILD_LIBNAME_OBJO := $(LIBNAME_OBJP)
+ endif
+ ifdef BUILD_ARCHIVE
+ BUILD_LIBNAME_AO := $(LIBNAME_AP)
+ endif
+ else
+ BUILD_LIBNAME_O := $(LIBNAME_O)
+ ifndef DONT_BUILD_RELINKED
+ BUILD_LIBNAME_OBJO := $(LIBNAME_OBJO)
+ endif
+ ifdef BUILD_ARCHIVE
+ BUILD_LIBNAME_AO := $(LIBNAME_AO)
+ endif
+ endif
+endif
-$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) Release/.dir Depend/.dir
+all:: $(BUILD_LIBNAME_AG) $(BUILD_LIBNAME_OBJG) # Debug
+all:: $(BUILD_LIBNAME_AO) $(BUILD_LIBNAME_OBJO) # Release
+all:: $(BUILD_LIBNAME_AP) $(BUILD_LIBNAME_OBJP) # Profile
+dynamic:: $(BUILD_LIBNAME_G) $(BUILD_LIBNAME_O) $(BUILD_LIBNAME_P) # .so files
+
+$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir
@echo ======= Linking $(LIBRARYNAME) release library =======
- $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
+
+$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir
+ @echo ======= Linking $(LIBRARYNAME) profile library =======
+ $(VERB) $(MakeSOP) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) Debug/.dir Depend/.dir
+$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir
@echo ======= Linking $(LIBRARYNAME) debug library =======
- $(MakeSOG) -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) Release/.dir Depend/.dir
+$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir
@echo ======= Linking $(LIBRARYNAME) release library =======
- rm -f $@
- $(MakeLib) $@ $(ObjectsO) $(LibSubDirs)
+ @rm -f $@
+ $(VERB) $(AR) $@ $(ObjectsO) $(LibSubDirs)
+
+$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir
+ @echo ======= Linking $(LIBRARYNAME) profile library =======
+ @rm -f $@
+ $(VERB) $(AR) $@ $(ObjectsP) $(LibSubDirs)
-$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) Debug/.dir Depend/.dir
+$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir
@echo ======= Linking $(LIBRARYNAME) debug library =======
- rm -f $@
- $(MakeLib) $@ $(ObjectsG) $(LibSubDirs)
+ @rm -f $@
+ $(VERB) $(AR) $@ $(ObjectsG) $(LibSubDirs)
+
+$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir
+ @echo "Linking $@"
+ $(VERB) $(Relink) -o $@ $(ObjectsO) $(LibSubDirs)
+
+$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir
+ @echo "Linking $@"
+ $(VERB) $(Relink) -o $@ $(ObjectsP) $(LibSubDirs)
+
+$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir
+ $(VERB) $(Relink) -o $@ $(ObjectsG) $(LibSubDirs)
endif
+#------------------------------------------------------------------------
+# Create a TAGS database for emacs
+#------------------------------------------------------------------------
+
+ifeq ($(LEVEL), .)
+tags:
+ etags -l c++ `find include lib tools -name '*.cpp' -o -name '*.h'`
+all:: tags
+endif
+
+#------------------------------------------------------------------------
+# Handle the TOOLNAME option - used when building tool executables...
+#------------------------------------------------------------------------
+#
+# The TOOLNAME option should be used with a USEDLIBS variable that tells the
+# libraries (and the order of the libs) that should be linked to the
+# tool. USEDLIBS should contain a list of library names (some with .a extension)
+# that are automatically linked in as .o files unless the .a suffix is added.
+#
+ifdef TOOLNAME
+
+# TOOLEXENAME* - These compute the output filenames to generate...
+TOOLEXENAME_G := $(BUILD_ROOT_TOP)/tools/Debug/$(TOOLNAME)
+TOOLEXENAME_O := $(BUILD_ROOT_TOP)/tools/Release/$(TOOLNAME)
+TOOLEXENAME_P := $(BUILD_ROOT_TOP)/tools/Profile/$(TOOLNAME)
+
+ifndef ENABLE_OPTIMIZED
+ TOOLEXENAMES := $(TOOLEXENAME_G)
+else
+ ifdef ENABLE_PROFILING
+ TOOLEXENAMES := $(TOOLEXENAME_P)
+ else
+ TOOLEXENAMES := $(TOOLEXENAME_O)
+ endif
+endif
+
+# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
+USED_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+USED_LIBS_OPTIONS_G := $(patsubst %.o, $(LIBDEBUG)/%.o, $(USED_LIBS_OPTIONS))
+USED_LIBS_OPTIONS_O := $(patsubst %.o, $(LIBRELEASE)/%.o,$(USED_LIBS_OPTIONS))
+USED_LIBS_OPTIONS_P := $(patsubst %.o, $(LIBPROFILE)/%.o,$(USED_LIBS_OPTIONS))
+
+
+# USED_LIB_PATHS - Compute the path of the libraries used so that tools are
+# rebuilt if libraries change. This has to make sure to handle .a/.so and .o
+# files seperately.
+#
+STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+USED_LIB_PATHS_G := $(addprefix $(LIBDEBUG)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_O := $(addprefix $(LIBRELEASE)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_P := $(addprefix $(LIBPROFILE)/, $(STATICUSEDLIBS))
+
+all:: $(TOOLEXENAMES)
+clean::
+ $(VERB) rm -f $(TOOLEXENAMES)
+
+$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(BUILD_ROOT_TOP)/tools/Debug/.dir
+ @echo ======= Linking $(TOOLNAME) debug executable =======
+ $(VERB) $(LinkG) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_G) $(TOOLLINKOPTS)
+
+$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(BUILD_ROOT_TOP)/tools/Release/.dir
+ @echo ======= Linking $(TOOLNAME) release executable =======
+ $(VERB) $(LinkO) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_O) $(TOOLLINKOPTS)
+
+$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(BUILD_ROOT_TOP)/tools/Profile/.dir
+ @echo ======= Linking $(TOOLNAME) profile executable =======
+ $(VERB) $(LinkP) -o $@ $(ObjectsP) $(USED_LIBS_OPTIONS_P) $(TOOLLINKOPTS)
+
+endif
+
+
#---------------------------------------------------------
+.PRECIOUS: $(BUILD_ROOT)/Depend/.dir
+.PRECIOUS: $(BUILD_ROOT)/Debug/.dir $(BUILD_ROOT)/Release/.dir
# Create dependencies for the *.cpp files...
-Depend/%.d: %.cpp Depend/.dir
- $(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@
+$(BUILD_ROOT)/Depend/%.d: %.cpp $(BUILD_ROOT)/Depend/.dir
+ $(VERB) $(Depend) $< | sed 's|$*\.o *|$(BUILD_ROOT)/Release/& $(BUILD_ROOT)/Profile/& $(BUILD_ROOT)/Debug/& $(BUILD_ROOT)/Depend/$(@F)|g' > $@
# Create dependencies for the *.c files...
-Depend/%.d: %.c Depend/.dir
- $(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@
+$(BUILD_ROOT)/Depend/%.d: %.c $(BUILD_ROOT)/Depend/.dir
+ $(VERB) $(DependC) $< | sed 's|$*\.o *|Release/& Profile/& Debug/& Depend/$(@F)|g' > $@
# Create .o files in the ObjectFiles directory from the .cpp and .c files...
-Release/%.o: %.cpp Release/.dir Depend/.dir
- $(CompileO) $< -o $@
+$(BUILD_ROOT)/Release/%.o: %.cpp $(BUILD_ROOT)/Release/.dir
+ @echo "Compiling $<"
+ $(VERB) $(CompileO) $< -o $@
+
+$(BUILD_ROOT)/Release/%.o: %.c $(BUILD_ROOT)/Release/.dir
+ $(VERB) $(CompileOC) $< -o $@
+
+$(BUILD_ROOT)/Profile/%.o: %.cpp $(BUILD_ROOT)/Profile/.dir
+ @echo "Compiling $<"
+ $(VERB) $(CompileP) $< -o $@
-Release/%.o: %.c Release/.dir Depend/.dir
- $(CompileO) $< -o $@
+$(BUILD_ROOT)/Profile/%.o: %.c $(BUILD_ROOT)/Profile/.dir
+ @echo "Compiling $<"
+ $(VERB) $(CompileCP) $< -o $@
-Debug/%.o: %.cpp Debug/.dir Depend/.dir
- $(CompileG) $< -o $@
+$(BUILD_ROOT)/Debug/%.o: %.cpp $(BUILD_ROOT)/Debug/.dir
+ @echo "Compiling $<"
+ $(VERB) $(CompileG) $< -o $@
-Debug/%.o: %.c Debug/.dir Depend/.dir
- $(CompileG) $< -o $@
+$(BUILD_ROOT)/Debug/%.o: %.c $(BUILD_ROOT)/Debug/.dir
+ $(VERB) $(CompileCG) $< -o $@
# Create a .cpp source file from a flex input file... this uses sed to cut down
# on the warnings emited by GCC...
# Rule for building the bison parsers...
%.cpp %.h : %.y
- bison -d -p $(<:%Parser.y=%) $(basename $@).y
- mv -f $(basename $@).tab.c $(basename $@).cpp
- mv -f $(basename $@).tab.h $(basename $@).h
+ $(VERB) $(BISON) -v -d -p $(<:%Parser.y=%) $(basename $@).y
+ $(VERB) mv -f $(basename $@).tab.c $(basename $@).cpp
+ $(VERB) mv -f $(basename $@).tab.h $(basename $@).h
# To create the directories...
%/.dir:
- mkdir -p $(@D)
+ $(VERB) mkdir -p $(@D)
@date > $@
-# Clean does not remove the output files... just the temporaries
+# 'make clean' nukes the tree
clean::
- rm -rf Debug Release Depend
- rm -f core *.o *.d *.so *~ *.flc
+ $(VERB) rm -rf $(BUILD_ROOT)/Debug $(BUILD_ROOT)/Release $(BUILD_ROOT)/Profile $(BUILD_ROOT)/Depend
+ $(VERB) rm -f core *.o *.d *.so *~ *.flc
# If dependancies were generated for the file that included this file,
# include the dependancies now...
#
-SourceDepend = $(addsuffix .d,$(addprefix Depend/,$(basename $(Source))))
+SourceDepend := $(addsuffix .d,$(addprefix $(BUILD_ROOT)/Depend/,$(basename $(filter-out Debug/%, $(Source)))))
ifneq ($(SourceDepend),)
include $(SourceDepend)
endif