SrcMakefiles := $(filter %Makefile %Makefile.tests,\
$(wildcard $(BUILD_SRC_DIR)/Makefile*))
ObjMakefiles := $(subst $(BUILD_SRC_DIR),$(BUILD_OBJ_DIR),$(SrcMakefiles))
-ConfigureScript := $(LLVM_SRC_ROOT)/configure
-ConfigStatusScript := $(LLVM_OBJ_ROOT)/config.status
+ConfigureScript := $(BUILD_SRC_ROOT)/configure
+ConfigStatusScript := $(BUILD_OBJ_ROOT)/config.status
+LConfigStatusScript:= $(LLVM_OBJ_ROOT)/config.status
MakefileConfigIn := $(LLVM_SRC_ROOT)/Makefile.config.in
MakefileConfig := $(LLVM_OBJ_ROOT)/Makefile.config
PreConditions := $(ConfigStatusScript) $(MakefileConfig) $(ObjMakefiles)
#------------------------------------------------------------------------
# Make sure the BUILT_SOURCES are built first
#------------------------------------------------------------------------
-$(filter-out clean clean-local,UserTargets):: $(BUILT_SOURCES)
+$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES)
clean-local::
ifneq ($(strip $(BUILT_SOURCES)),)
-$(Verb) $(RM) -f $(BUILT_SOURCES)
endif
+ifneq ($(BUILD_OBJ_ROOT),$(BUILD_SRC_ROOT))
+spotless:
+ $(Verb) if test -x config.status ; then \
+ $(EchoCmd) Wiping out $(BUILD_OBJ_ROOT) ; \
+ $(MKDIR) .spotless.save ; \
+ $(MV) config.status .spotless.save ; \
+ $(MV) mklib .spotless.save ; \
+ $(MV) projects .spotless.save ; \
+ $(RM) -rf * ; \
+ $(MV) .spotless.save/config.status . ; \
+ $(MV) .spotless.save/mklib . ; \
+ $(MV) .spotless.save/projects . ; \
+ $(RM) -rf .spotless.save ; \
+ $(EchoCmd) Rebuilding configuration of $(BUILD_OBJ_ROOT) ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript) ; \
+ else \
+ $(EchoCmd) "make spotless" can only be run from $(BUILD_OBJ_ROOT); \
+ fi
+endif
+
$(BUILT_SOURCES) : $(ObjMakefiles)
#------------------------------------------------------------------------
# Make sure we're not using a stale configuration
#------------------------------------------------------------------------
+reconfigure:
+ $(Echo) Reconfiguring $(BUILD_OBJ_ROOT)
+ $(Verb) cd $(BUILD_OBJ_ROOT) && \
+ if test -w $(BUILD_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(BUILD_OBJ_ROOT)/config.cache ; \
+ fi ; \
+ $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
+ $(ConfigStatusScript)
+
.PRECIOUS: $(ConfigStatusScript)
$(ConfigStatusScript): $(ConfigureScript)
$(Echo) Reconfiguring with $<
$(Verb) cd $(BUILD_OBJ_ROOT) && \
+ if test -w $(BUILD_OBJ_ROOT)/config.cache ; then \
+ $(RM) $(BUILD_OBJ_ROOT)/config.cache ; \
+ fi ; \
$(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \
$(ConfigStatusScript)
#------------------------------------------------------------------------
# Make sure the configuration makefile is up to date
#------------------------------------------------------------------------
-$(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript)
+$(MakefileConfig): $(MakefileConfigIn) $(LConfigStatusScript)
$(Echo) Regenerating $@
- $(Verb) cd $(LLVM_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config
+ $(Verb) cd $(LLVM_OBJ_ROOT) ; $(LConfigStatusScript) Makefile.config
#------------------------------------------------------------------------
# If the Makefile in the source tree has been updated, copy it over into the
Makefile: $(BUILD_SRC_DIR)/Makefile
$(Echo) "Updating Makefile"
$(Verb) $(MKDIR) $(@D)
- $(Verb) cp -f $< $@
+ $(Verb) $(CP) -f $< $@
# Copy the Makefile.* files unless we're in the root directory which avoids
# the copying of Makefile.config.in or other things that should be explicitly
*.in) ;; \
*) $(Echo) "Updating $(@F)" ; \
$(MKDIR) $(@D) ; \
- cp -f $< $@ ;; \
+ $(CP) -f $< $@ ;; \
esac
endif
ExmplDir := $(BUILD_OBJ_ROOT)/$(BuildMode)/examples
LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib
LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin
-LExmplDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+LLVMExmplDir:= $(LLVM_OBJ_ROOT)/$(BuildMode)/examples
+CFERuntimeLibDir := $(LLVMGCCDIR)/lib
#--------------------------------------------------------------------
# Full Paths To Compiled Tools and Utilities
ifndef GCCLD
GCCLD := $(LLVMToolDir)/gccld$(EXEEXT)
endif
-ifndef LLVMGCC
-LLVMGCC := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/gcc
-endif
-ifndef LLVMGXX
-LLVMGXX := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCCDIR)/bin/g++
-endif
ifndef LDIS
LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
endif
ifndef LOPT
LOPT := $(LLVMToolDir)/opt$(EXEEXT)
endif
+LLVMGCCWITHPATH := PATH=$(LLVMToolDir):$(PATH) $(LLVMGCC)
+LLVMGXXWITHPATH := PATH=$(LLVMToolDir):$(PATH) $(LLVMGXX)
#--------------------------------------------------------------------
# Adjust to user's request
Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
-BCCompile.C = $(LLVMGCC) $(CPP.Flags) $(CompileCommonOpts) $(C.Flags) -c
+BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(C.Flags) -c
Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
-BCCompile.CXX = $(LLVMGXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
+ $(CXX.Flags) -c
Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
$(CompileCommonOpts) $(LD.Flags) $(Strip)
Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
$(Verb) for dir in $(DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
($(MAKE) -C $$dir $@ ) || exit 1; \
$(Verb) for dir in $(EXPERIMENTAL_DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
($(MAKE) -C $$dir $@ ) || exit 0; \
$(ParallelTargets) :
$(Verb) if [ ! -f $(@D)/Makefile ]; then \
$(MKDIR) $(@D); \
- cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
$(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \
if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\
if [ ! -f $$dir/Makefile ]; then \
$(MKDIR) $$dir; \
- cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
+ $(CP) $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \
fi; \
if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \
($(MAKE) -C$$dir $@ ) || exit 1; \
ifdef MODULE_NAME
Module := $(LibDir)/$(MODULE_NAME).bc
-LinkModule := $(LLVMGCC) -shared -nostdlib
+LinkModule := $(LLVMGCCWITHPATH) -shared -nostdlib
ifdef EXPORTED_SYMBOL_FILE
LinkMOdule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
ifdef BYTECODE_DESTINATION
ModuleDestDir := $(BYTECODE_DESTINATION)
else
-ModuleDestDir := $(BYTECODE_DESTINATION)
+ModuleDestDir := $(libdir)
endif
DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc
all-local:: $(LibName.LA)
-$(LibName.LA): $(BUILT_SOURCES) $(ObjectsLO) $(LibDir)/.dir
+$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
$(Verb) $(Link) -o $@ $(ObjectsLO)
$(Verb) $(LTInstall) $@ $(LibDir)
all-local:: $(LibName.BCA)
ifdef EXPORTED_SYMBOL_FILE
-BCLinkLib = $(LLVMGCC) -shared -nostdlib -Xlinker \
+BCLinkLib = $(LLVMGCCWITHPATH) -shared -nostdlib -Xlinker \
-internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
-$(LibName.BCA): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \
+ $(LLVMToolDir)/llvm-ar
$(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \
"(internalize)"
$(Verb) $(BCLinkLib) -o $(ObjDir)/$(LIBRARYNAME).o $(ObjectsBC)
$(Verb) $(RM) -f $@
$(Verb) $(LArchive) $@ $(ObjDir)/$(LIBRARYNAME).o
else
-$(LibName.BCA): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir
+$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir \
+ $(LLVMToolDir)/llvm-ar
$(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@)
$(Verb) $(RM) -f $@
$(Verb) $(LArchive) $@ $(ObjectsBC)
all-local:: $(LibName.O)
-$(LibName.O): $(BUILT_SOURCES) $(ObjectsO) $(LibDir)/.dir
+$(LibName.O): $(ObjectsO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Object Library $(notdir $@)
$(Verb) $(Relink) -o $@ $(ObjectsO)
all-local:: $(LibName.A)
-$(LibName.A): $(BUILT_SOURCES) $(ObjectsO) $(LibDir)/.dir
+$(LibName.A): $(ObjectsO) $(LibDir)/.dir
$(Echo) Building $(BuildMode) Archive Library $(notdir $@)
-$(Verb) $(RM) -f $@
$(Verb) $(Archive) $@ $(ObjectsO)
# What the X86 JIT requires
ifdef ENABLE_X86_JIT
- JIT_LIBS += LLVMX86 LLVMSelectionDAG
+ JIT_LIBS += LLVMX86
endif
# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
$(ToolBuildPath): $(ToolDir)/.dir
endif
-$(ToolBuildPath): $(BUILT_SOURCES) $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
+$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
$(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
$(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB)
#---------------------------------------------------------
ifdef SHARED_LIBRARY
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
$(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
$(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \
#---------------------------------------------------------
else
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build"
$(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir
+$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build"
$(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \
#---------------------------------------------------------
# Create .bc files in the ObjDir directory from .cpp and .c files...
#---------------------------------------------------------
-$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS)
+$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
-$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS)
+$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \
then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \
ifdef SHARED_LIBRARY
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
$(LTCompile.CXX) $< -o $@
-$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir
- $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)"
+$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)"
$(LTCompile.C) $< -o $@
else
-$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir
+$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build"
$(Compile.CXX) $< -o $@
-$(ObjDir)/%.o: %.c $(ObjDir)/.dir
- $(Echo) "Compiling $*.cpp for $(BuildMode) build"
+$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+ $(Echo) "Compiling $*.c for $(BuildMode) build"
$(Compile.C) $< -o $@
endif
-$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS)
+$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@
-$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS)
+$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(BCCompile.C) $< -o $@
TDFiles := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
INCFiles := $(filter %.inc,$(BUILT_SOURCES))
-
-$(INCFiles) : $(TBLGEN) $(TDFiles)
-
-%GenRegisterNames.inc : %.td
+INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
+.PRECIOUS: $(INCTMPFiles) $(INCFiles)
+
+# All of these files depend on tblgen and the .td files.
+$(INCTMPFiles) : $(TBLGEN) $(TDFiles)
+
+# INCFiles rule: All of the tblgen generated files are emitted to
+# $(ObjDir)/%.inc.tmp, instead of emitting them directly to %.inc. This allows
+# us to only "touch" the real file if the contents of it change. IOW, if
+# tblgen is modified, all of the .inc.tmp files are regereated, but no
+# dependencies of the .inc files are, unless the contents of the .inc file
+# changes.
+$(INCFiles) : %.inc : $(ObjDir)/%.inc.tmp
+ $(Verb) $(CMP) -s $@ $< || $(CP) $< $@
+
+$(TARGET:%=$(ObjDir)/%GenRegisterNames.inc.tmp): \
+$(ObjDir)/%GenRegisterNames.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register names with tblgen"
$(Verb) $(TableGen) -gen-register-enums -o $@ $<
-%GenRegisterInfo.h.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenRegisterInfo.h.inc.tmp): \
+$(ObjDir)/%GenRegisterInfo.h.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register information header with tblgen"
$(Verb) $(TableGen) -gen-register-desc-header -o $@ $<
-%GenRegisterInfo.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenRegisterInfo.inc.tmp): \
+$(ObjDir)/%GenRegisterInfo.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) register info implementation with tblgen"
$(Verb) $(TableGen) -gen-register-desc -o $@ $<
-%GenInstrNames.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenInstrNames.inc.tmp): \
+$(ObjDir)/%GenInstrNames.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) instruction names with tblgen"
$(Verb) $(TableGen) -gen-instr-enums -o $@ $<
-%GenInstrInfo.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenInstrInfo.inc.tmp): \
+$(ObjDir)/%GenInstrInfo.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) instruction information with tblgen"
$(Verb) $(TableGen) -gen-instr-desc -o $@ $<
-%GenAsmWriter.inc : %.td
+$(TARGET:%=$(ObjDir)/%GenAsmWriter.inc.tmp): \
+$(ObjDir)/%GenAsmWriter.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) assembly writer with tblgen"
$(Verb) $(TableGen) -gen-asm-writer -o $@ $<
-%GenATTAsmWriter.inc : %.td
- $(Echo) "Building $(<F) AT&T assembly writer with tblgen"
- $(Verb) $(TableGen) -gen-asm-writer -o $@ $<
-
-%GenIntelAsmWriter.inc : %.td
- $(Echo) "Building $(<F) Intel assembly writer with tblgen"
+$(TARGET:%=$(ObjDir)/%GenAsmWriter1.inc.tmp): \
+$(ObjDir)/%GenAsmWriter1.inc.tmp : %.td $(ObjDir)/.dir
+ $(Echo) "Building $(<F) assembly writer #1 with tblgen"
$(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $@ $<
-%GenInstrSelector.inc: %.td
- $(Echo) "Building $(<F) instruction selector with tblgen"
- $(Verb) $(TableGen) -gen-instr-selector -o $@ $<
-
-%GenCodeEmitter.inc:: %.td
+$(TARGET:%=$(ObjDir)/%GenCodeEmitter.inc.tmp): \
+$(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) code emitter with tblgen"
$(Verb) $(TableGen) -gen-emitter -o $@ $<
gunzip -c $(DistTarGZip) | $(TAR) xf - && \
cd build && \
../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
- --srcdir=../$(DistName) --with-llvmgccdir="$(LLVMGCCDIR)" && \
+ --srcdir=../$(DistName) && \
$(MAKE) all && \
$(MAKE) check && \
$(MAKE) install && \
if test -d "$$from_dir/$$file"; then \
if test -d "$(BUILD_SRC_DIR)/$$file" && \
test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \
- cp -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+ $(CP) -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
fi; \
- cp -pR $$from_dir/$$file $$to_dir || exit 1; \
+ $(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \
elif test -f "$$from_dir/$$file" ; then \
- cp -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
+ $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
elif test -L "$$from_dir/$$file" ; then \
- cp -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
+ $(CP) -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \
elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \
$(EchoCmd) "===== WARNING: Distribution Source " \
"$$from_dir/$$file Not Found!" ; \
$(Echo) "Sources : " '$(Sources)'
$(Echo) "TDFiles : " '$(TDFiles)'
$(Echo) "INCFiles : " '$(INCFiles)'
+ $(Echo) "INCTMPFiles : " '$(INCTMPFiles)'
$(Echo) "Compile.CXX : " '$(Compile.CXX)'
$(Echo) "Compile.C : " '$(Compile.C)'
$(Echo) "Archive : " '$(Archive)'