# Variables derived from configuration we are building
#--------------------------------------------------------------------
-
ifdef ENABLE_PROFILING
BuildMode := Profile
- CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg
- C.Flags := -O3 -DNDEBUG -pg
- LD.Flags := -O3 -DNDEBUG -pg
+ CXX.Flags := -O3 -felide-constructors -finline-functions -pg
+ C.Flags := -O3 -pg
+ LD.Flags := -O3 -pg
else
ifdef ENABLE_OPTIMIZED
BuildMode := Release
ifneq ($(OS),FreeBSD)
OmitFramePointer := -fomit-frame-pointer
endif
- CXX.Flags := -O3 -DNDEBUG -finline-functions -felide-constructors \
- $(OmitFramePointer)
- C.Flags := -O3 -DNDEBUG $(OmitFramePointer)
- LD.Flags := -O3 -DNDEBUG
+ CXX.Flags := -O3 -finline-functions -felide-constructors $(OmitFramePointer)
+ C.Flags := -O3 $(OmitFramePointer)
+ LD.Flags := -O3
else
BuildMode := Debug
- CXX.Flags := -g -D_DEBUG
- C.Flags := -g -D_DEBUG
- LD.Flags := -g -D_DEBUG
+ CXX.Flags := -g
+ C.Flags := -g
+ LD.Flags := -g
KEEP_SYMBOLS := 1
endif
endif
-CXX.Flags += $(CXXFLAGS)
-C.Flags += $(CFLAGS)
-CPP.Flags += $(CPPFLAGS)
-LD.Flags += $(LDFLAGS)
-AR.Flags := cru
+# If DISABLE_ASSERTIONS=1 is specified (make command line or configured),
+# then disable assertions by defining the appropriate preprocessor symbols.
+ifdef DISABLE_ASSERTIONS
+ BuildMode := $(BuildMode)-Asserts
+ CXX.Flags += -DNDEBUG
+ C.Flags += -DNDEBUG
+else
+ CXX.Flags += -D_DEBUG
+ C.Flags += -D_DEBUG
+endif
+
+CXX.Flags += $(CXXFLAGS)
+C.Flags += $(CFLAGS)
+CPP.BaseFlags += $(CPPFLAGS)
+LD.Flags += $(LDFLAGS)
+AR.Flags := cru
LibTool.Flags := --tag=CXX
#Make Floating point ieee complient on alpha
ifeq ($(ARCH),Alpha)
- CXX.Flags += -mieee
- CPP.Flags += -mieee
+ CXX.Flags += -mieee
+ CPP.BaseFlags += -mieee
endif
#--------------------------------------------------------------------
ifndef LLVMAS
LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT)
endif
-ifndef BURG
-BURG := $(LLVMToolDir)/burg$(EXEEXT)
-endif
ifndef TBLGEN
TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
endif
CompileCommonOpts := -D_REENTRANT -D_HPUX_SOURCE
endif
-LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
-CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
- -I$(PROJ_OBJ_ROOT)/include \
- -I$(PROJ_SRC_ROOT)/include \
- -I$(LLVM_OBJ_ROOT)/include \
- -I$(LLVM_SRC_ROOT)/include \
- -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+# If we are building a universal binary on Mac OS/X, pass extra options. This is
+# useful to people that want to link the LLVM libraries into their universal apps.
+ifdef UNIVERSAL
+ CompileCommonOpts += \
+ -arch i386 -arch ppc -isysroot /Developer/SDKs/MACOSX10.4u.sdk/
+ Relink.Flags := -XCClinker -arch -XCClinker i386 -XCClinker -arch \
+ -XCClinker ppc -XCClinker \
+ -isysroot -XCClinker /Developer/SDKs/MACOSX10.4u.sdk/
+ DISABLE_AUTO_DEPENDENCIES=1
+endif
+
+# Temporary workaround for a Mac OSX / x86 compatibility issue.
+ifeq ($(OS),Darwin)
+ifeq ($(ARCH),x86)
+ CXX.Flags += -fno-use-cxa-atexit
+endif
+endif
+
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+CPP.BaseFlags += -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
+# All -I flags should go here, so that they don't confuse llvm-config.
+CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
+ -I$(PROJ_OBJ_ROOT)/include \
+ -I$(PROJ_SRC_ROOT)/include \
+ -I$(LLVM_OBJ_ROOT)/include \
+ -I$(LLVM_SRC_ROOT)/include \
+ $(CPP.BaseFlags)
Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
$(CXX.Flags)
Preprocess.CXX= $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -E
Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
- $(CompileCommonOpts) $(LD.Flags) $(Strip)
+ $(CXX.Flags) $(CompileCommonOpts) $(LD.Flags) $(Strip)
Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
- $(CompileCommonOpts)
+ $(CXX.Flags) $(CompileCommonOpts) $(Relink.Flags)
LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) \
$(Install.Flags)
ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
+ScriptInstall = $(INSTALL) -m 0755
DataInstall = $(INSTALL) -m 0644
-Burg = $(BURG) -I $(PROJ_SRC_DIR)
-TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR) -I$(PROJ_SRC_ROOT)/include
+TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR) -I$(PROJ_SRC_ROOT)/include \
+ -I $(PROJ_SRC_ROOT)/lib/Target
Archive = $(AR) $(AR.Flags)
LArchive = $(LLVMToolDir)/llvm-ar rcsf
ifdef RANLIB
# shorthand for a bunch of libraries that get the correct
# JIT support for a library or a tool that runs JIT.
#---------------------------------------------------------
+ifeq ($(firstword $(LLVMLIBS)),config)
+LLVM_CONFIG := $(LLVM_SRC_ROOT)/utils/llvm-config/llvm-config
+LLVMLIBS := $(shell $(LLVM_CONFIG) --libnames $(wordlist 2,9999,$(LLVMLIBS)))
+LLVMLIBS := $(patsubst lib%.a,%.a,$(LLVMLIBS))
+LLVMLIBS := $(patsubst %.o,%,$(LLVMLIBS))
+endif
+
ifeq ($(LLVMLIBS),JIT)
# Make sure we can get our own symbols in the tool
JIT_LIBS += LLVMX86 LLVMSelectionDAG
endif
-# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
-# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
-# enabled automagically on an SparcV9 host.
-ifeq ($(ARCH), Sparc)
- ENABLE_SPARCV9_JIT = 1
-endif
-
-# What the Sparc JIT requires
-ifdef ENABLE_SPARCV9_JIT
- JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
- LLVMSparcV9LiveVar LLVMInstrumentation.a \
- LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
- LLVMDataStructure LLVMSparcV9RegAlloc
-endif
-
# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
# ENABLE_PPC_JIT on the make command line. If not, it will still be
# enabled automagically on an PowerPC host.
endif
LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts.a LLVMTransformUtils.a LLVMAnalysis.a \
- LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
+ LLVMBCReader LLVMTarget.a LLVMCore LLVMSupport.a LLVMbzip2 \
LLVMSystem.a $(PLATFORMLIBDL)
endif
#---------------------------------------------------------
# Some versions of gcc on Alpha produce too many symbols, so use a .a file
ifeq ($(ARCH),Alpha)
-USEDLIBS := $(subst LLVMCore, LLVMCore.a, $(USEDLIBS))
+USEDLIBS := $(subst LLVMCore, LLVMCore.a, $(USEDLIBS))
LLVMLIBS := $(subst LLVMCore, LLVMCore.a, $(LLVMLIBS))
+CORE_IS_ARCHIVE := 1
+else
+CORE_IS_ARCHIVE := 0
endif
ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
else
Module := $(LibDir)/$(MODULE_NAME).bc
-LinkModule := $(GCCLD)
+LinkModule := $(GCCLD) -L$(CFERuntimeLibDir)
+
ifdef EXPORTED_SYMBOL_FILE
LinkModule += -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
all-local:: $(LibName.BCA)
ifdef EXPORTED_SYMBOL_FILE
-BCLinkLib = $(GCCLD) -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+BCLinkLib = $(GCCLD) -L$(CFERuntimeLibDir) -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \
$(LLVMToolDir)/llvm-ar
$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
- $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(LLVMLibsOptions) \
- $(ProjLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
+ $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
$(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
$(StripWarnMsg)
$(MAKE) check && \
$(MAKE) install && \
$(MAKE) uninstall && \
- $(MAKE) dist && \
- $(MAKE) clean && \
$(MAKE) dist-clean && \
$(EchoCmd) ===== $(DistTarGZip) Ready For Distribution =====
$(EchoCmd) Removing old $(DistDir) ; \
$(RM) -rf $(DistDir); \
$(EchoCmd) Making 'all' to verify build ; \
- $(MAKE) all ; \
+ $(MAKE) ENABLE_OPTIMIZED=1 all ; \
fi
$(Echo) Building Distribution Directory $(DistDir)
$(Verb) $(MKDIR) $(DistDir)
if test "$$subdir" \!= "." ; then \
new_distdir="$(DistDir)/$$subdir" ; \
test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \
- ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \
- exit 1; \
+ ( cd $$subdir && $(MAKE) ENABLE_OPTIMIZED=1 \
+ DistDir="$$new_distdir" distdir ) || exit 1; \
fi; \
done
$(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
$(Echo) "LexFiles : " '$(LexFiles)'
$(Echo) "Module : " '$(Module)'
$(Echo) "FilesToConfig: " '$(FilesToConfigPATH)'
+ $(Echo) "SubDirs : " '$(SubDirs)'