-# Makefile.common
+#===-- Makefile.rules - Common make rules for LLVM ---------*- Makefile -*--===#
+#
+# The LLVM Compiler Infrastructure
+#
+# This file was developed by the LLVM research group and is distributed under
+# the University of Illinois Open Source License. See LICENSE.TXT for details.
+#
+#===------------------------------------------------------------------------===#
#
# This file is included by all of the LLVM makefiles. This file defines common
-# rules to do things like compile a .cpp file or generate dependancy info.
-# These are platform dependant, so this is the file used to specify these
-# system dependant operations.
+# rules to do things like compile a .cpp file or generate dependency info.
+# These are platform dependent, so this is the file used to specify these
+# system dependent operations.
#
-# The following functionality may be set by setting incoming variables:
+# The following functionality can be set by setting incoming variables.
+# The variable $(LEVEL) *must* be set:
#
# 1. LEVEL - The level of the current subdirectory from the top of the
# MagicStats view. This level should be expressed as a path, for
# example, ../.. for two levels deep.
#
# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
-# so that each of the targets "all", "install", and "clean" each build.
-# the subdirectories before the local target.
+# so that each of the targets "all", "install", and "clean" each build
+# the subdirectories before the local target. DIRS are guaranteed to be
+# built in order.
+#
+# 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be
+# built in any order. All DIRS are built in order before PARALLEL_DIRS are
+# built, which are then built in any order.
#
-# 3. Source - If specified, this sets the source code filenames. If this
+# 4. Source - If specified, this sets the source code filenames. If this
# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
-# in the current directory.
+# in the current directory. Also, if you want to build files in addition
+# to the local files, you can use the ExtraSource variable
+#
+# 5. SourceDir - If specified, this specifies a directory that the source files
+# are in, if they are not in the current directory. This should include a
+# trailing / character.
+#
+# 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree.
+#
+# 8. BUILD_SRC_DIR - The directory which contains the current set of Makefiles
+# and usually the source code too (unless SourceDir is set).
#
+# 9. BUILD_SRC_ROOT - The root directory of the source code being compiled.
+#
+# 10. BUILD_OBJ_DIR - The directory where object code should be placed.
+#
+# 11. BUILD_OBJ_ROOT - The root directory for where object code should be
+# placed.
+#
+# For building,
+# LLVM, LLVM_SRC_ROOT = BUILD_SRC_ROOT
+#
+#===-----------------------------------------------------------------------====
+
+#
+# Set the VPATH so that we can find source files.
+#
+VPATH=$(SourceDir)
+
+###########################################################################
+# Default Targets:
+# The following targets are the standard top level targets for
+# building.
+###########################################################################
+
+# Ensure people re-run configure when it gets updated
+all::$(LLVM_OBJ_ROOT)/config.status
+
+ifdef SHARED_LIBRARY
+# if SHARED_LIBRARY is specified, the default is to build the dynamic lib
+all:: dynamic
+install:: install-dynamic-library
+endif
+
+ifdef BYTECODE_LIBRARY
+# if BYTECODE_LIBRARY is specified, the default is to build the bytecode lib
+all:: bytecodelib
+install:: install-bytecode-library
+install-bytecode:: install-bytecode-library
+endif
# Default Rule: Make sure it's also a :: rule
all ::
# Default for install is to at least build everything...
install ::
+# Default rule for test. It ensures everything has a test rule
+test::
+
+# Default rule for building only bytecode.
+bytecode::
+
+# Default rule for installing only bytecode.
+install-bytecode::
+
+# Print out the directories used for building
+prdirs::
+ @${ECHO} "Build Source Root: " $(BUILD_SRC_ROOT)
+ @${ECHO} "Build Source Dir : " $(BUILD_SRC_DIR)
+ @${ECHO} "Build Object Root: " $(BUILD_OBJ_ROOT)
+ @${ECHO} "Build Object Dir : " $(BUILD_OBJ_DIR)
+ @${ECHO} "LLVM Source Root: " $(LLVM_SRC_ROOT)
+ @${ECHO} "LLVM Object Root: " $(LLVM_OBJ_ROOT)
+
+###########################################################################
+# Suffixes and implicit rules:
+# Empty out the list of suffixes, generate a list that is only
+# used by this Makefile, and cancel useless implicit rules. This
+# will hopefully speed up compilation a little bit.
+###########################################################################
+.SUFFIXES:
+.SUFFIXES: .c .cpp .h .hpp .y .l
+.SUFFIXES: .lo .o .a $(SHLIBEXT) .bc .td
+.SUFFIXES: .ps .dot .d
+
+#
+# Mark all of these targets as phony. This will hopefully speed up builds
+# slightly since GNU Make will not try to find implicit rules for targets
+# which are marked as Phony.
+#
+.PHONY: all dynamic bytecodelib install-bytecode-library
+.PHONY: clean distclean install test bytecode prdirs
+
+###########################################################################
+# Miscellaneous paths and commands:
+# This section defines various configuration macros, such as where
+# to find burg, tblgen, and libtool.
+###########################################################################
+
#--------------------------------------------------------------------
-# Installation configuration options...
+# Variables derived from configuration options...
#--------------------------------------------------------------------
-#BinInstDir=/usr/local/bin
-#LibInstDir=/usrl/local/lib/xxx
-#DocInstDir=/usr/doc/xxx
+BURG_OPTS = -I
+
+ifdef ENABLE_PROFILING
+ ENABLE_OPTIMIZED = 1
+ CONFIGURATION := Profile
+else
+ ifdef ENABLE_OPTIMIZED
+ CONFIGURATION := Release
+ else
+ CONFIGURATION := Debug
+ endif
+endif
-#---------------------------------------------------------
-# Compilation options...
-#---------------------------------------------------------
+#
+# Enable this for profiling support with 'gprof'
+# This automatically enables optimized builds.
+#
+ifdef ENABLE_PROFILING
+ PROFILE = -pg
+endif
-# Add -L options to the link command lines...
-LibPathsO = -L $(LEVEL)/lib/VMCore/Release \
- -L $(LEVEL)/lib/Assembly/Parser/Release \
- -L $(LEVEL)/lib/Assembly/Writer/Release \
- -L $(LEVEL)/lib/Analysis/Release \
- -L $(LEVEL)/lib/Bytecode/Writer/Release \
- -L $(LEVEL)/lib/Bytecode/Reader/Release \
- -L $(LEVEL)/lib/Optimizations/Release
+###########################################################################
+# Library Locations:
+# These variables describe various library locations:
+#
+# DEST* = Location of where libraries that are built will be placed.
+# LLVM* = Location of LLVM libraries used for linking.
+# PROJ* = Location of previously built libraries used for linking.
+###########################################################################
+
+# Libraries that are being built
+DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug
+DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release
+DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile
+DESTLIBBYTECODE := $(BUILD_OBJ_ROOT)/lib/BytecodeLibs
+DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
+
+# LLVM libraries used for linking
+LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug
+LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release
+LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile
+LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION)
+
+# Libraries that were built that will now be used for linking
+PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug
+PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release
+PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile
+PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION)
+
+###########################################################################
+# Tool Locations
+# These variables describe various tool locations:
+#
+# DEST* = Location of where tools that are built will be placed.
+# LLVM* = Location of LLVM tools used for building.
+# PROJ* = Location of previously built tools used for linking.
+###########################################################################
+
+DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
+DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
+DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
+DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
+
+LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug
+LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release
+LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile
+LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION)
+
+PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug
+PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release
+PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile
+PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION)
-LibPathsG = $(LibPathsO:Release=Debug)
+#
+# Libtool is found in the current directory.
+#
+LIBTOOL := $(LLVM_OBJ_ROOT)/mklib
-# Enable this for profiling support with 'gprof'
-#Prof = -pg
+#
+# If we're not building a shared library, use the disable-shared tag with
+# libtool. This will disable the building of objects for shared libraries and
+# only generate static library objects.
+#
+# For dynamic libraries, we'll take the performance hit for now, since we
+# almost never build them.
+#
+# This should speed up compilation and require no modifications to future
+# versions of libtool.
+#
+ifndef SHARED_LIBRARY
+LIBTOOL += --tag=disable-shared
+endif
-# TODO: Get rid of exceptions! : -fno-exceptions -fno-rtti
-CompileCommonOpts = $(Prof) -Wall -Winline -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include
+#
+# Verbosity levels
+#
+ifndef VERBOSE
+VERB := @
+LIBTOOL += --silent
+endif
+
+###########################################################################
+# Miscellaneous paths and commands (part deux):
+# This section defines various configuration macros, such as where
+# to find burg, tblgen, and libtool.
+###########################################################################
+
+#--------------------------------------------------------------------------
+# Utilities used while building the LLVM tree, which live in the utils dir
+#
+BURG := $(LLVMTOOLCURRENT)/burg$(EXEEXT)
+RunBurg := $(BURG) $(BURG_OPTS)
+TBLGEN := $(LLVMTOOLCURRENT)/tblgen$(EXEEXT)
+LGCCLDPROG := $(LLVMTOOLCURRENT)/gccld$(EXEEXT)
+
+#--------------------------------------------------------------------------
+# The LLVM GCC front-end in C and C++ flavors
+#
+LLVMGCC := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/gcc
+LLVMGXX := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/g++
+
+#--------------------------------------------------------------------------
+# The compiled LLVM tools
+#
+
+LLVMAS := $(LLVMTOOLCURRENT)/llvm-as$(EXEEXT)
+# Find the location of the platform specific LLVM GCC libraries
+LLVMGCCLIBDIR=$(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a))
+# LLVM Tool Definitions (LLVMGCC, LLVMGXX, LLVMAS are provided by
+# Makefile.rules)
+LLI = $(LLVMTOOLCURRENT)/lli$(EXEEXT)
+LLC = $(LLVMTOOLCURRENT)/llc$(EXEEXT)
+LGCCAS = $(LLVMTOOLCURRENT)/gccas$(EXEEXT)
+LGCCLD = $(LGCCLDPROG) -L$(LLVMGCCLIBDIR) -L$(LLVMGCCDIR)/lib
+LDIS = $(LLVMTOOLCURRENT)/llvm-dis$(EXEEXT)
+LOPT = $(LLVMTOOLCURRENT)/opt$(EXEEXT)
+LLINK = $(LLVMTOOLCURRENT)/llvm-link$(EXEEXT)
+LPROF = $(LLVMTOOLCURRENT)/llvm-prof$(EXEEXT)
+LANALYZE = $(LLVMTOOLCURRENT)/analyze$(EXEEXT)
+LBUGPOINT = $(LLVMTOOLCURRENT)/bugpoint$(EXEEXT)
+
+
+###########################################################################
+# Compile Time Flags
+###########################################################################
+
+#
+# Include both the project headers and the LLVM headers for compilation and
+# dependency computation.
+#
+# BUILD_OBJ_DIR : Files local to the particular object directory
+# (locallly generated header files).
+# BUILD_SRC_DIR : Files local to the particular source directory.
+# BUILD_SRC_ROOT/include : Files global to the project.
+# LLVM_OBJ_ROOT/include : config.h files generated by autoconf
+# LEVEL/include : config.h files for the project
+# LLVM_SRC_ROOT/include : Files global to LLVM.
+#
+CPPFLAGS += -I$(BUILD_OBJ_DIR) -I$(BUILD_SRC_DIR) -I$(LLVM_OBJ_ROOT)/include \
+ -I$(BUILD_SRC_ROOT)/include -I$(LEVEL)/include \
+ -I$(LLVM_SRC_ROOT)/include
+
+# By default, strip symbol information from executable
+ifndef KEEP_SYMBOLS
+STRIP = $(PLATFORMSTRIPOPTS)
+STRIP_WARN_MSG = "(without symbols)"
+endif
+
+# Allow GNU extensions:
+CPPFLAGS += -D_GNU_SOURCE
+# Pull in limit macros from stdint.h, even in C++:
+CPPFLAGS += -D__STDC_LIMIT_MACROS
+
+### FIXME: this is GCC specific
+CPPFLAGS += -DATTR_DEPRECATED='__attribute__ ((deprecated))'
+
+CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
+CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions
+
+#
+# Compile commands with libtool.
+#
+Compile := $(LIBTOOL) --tag=CXX --mode=compile $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
+CompileC := $(LIBTOOL) --mode=compile $(CC) -c $(CPPFLAGS) $(CFLAGS) $(CompileCommonOpts)
-# Compile a file, don't link...
-Compile = $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts)
-CompileG = $(Compile) -g -D_DEBUG
-# Add This for DebugMalloc: -fno-defer-pop
-CompileO = $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fnonnull-objects -freg-struct-return -fshort-enums
+# Compile a cpp file, don't link...
+CompileG := $(Compile) -g -D_DEBUG
+CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer
+CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE)
+# Compile a c file, don't link...
+CompileCG := $(CompileC) -g -D_DEBUG
+CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer
+CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE)
+
+###########################################################################
+# Link Time Options
+###########################################################################
+
+#
# Link final executable
-Link = $(CXX) $(Prof)
-LinkG = $(Link) -g $(LibPathsG)
-LinkO = $(Link) -O3 $(LibPathsO)
+# (Note that we always link with the C++ compiler).
+#
+Link := $(LIBTOOL) --tag=CXX --mode=link $(CXX)
+
+# link both projlib and llvmlib libraries
+LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP)
+LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE)
+LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE)
+
+# TOOLLINKOPTSB to pass options to the linker like library search path etc
+# Note that this is different from TOOLLINKOPTS, these options
+# are passed to the linker *before* the USEDLIBS options are passed.
+# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib
+ifdef TOOLLINKOPTSB
+LinkG := $(LinkG) $(TOOLLINKOPTSB)
+LinkO := $(LinkO) $(TOOLLINKOPTSB)
+LinkP := $(LinkP) $(TOOLLINKOPTSB)
+endif
+
+# Create one .o file from a bunch of .o files...
+Relink := ${LIBTOOL} --tag=CXX --mode=link $(CXX)
+
+#
+# Configure where the item being compiled should go.
+#
+ifdef SHARED_LIBRARY
+Link += -rpath $(DESTLIBCURRENT)
+endif
-# Create a .so file from a .cpp file...
-#MakeSO = $(CXX) -shared $(Prof)
-MakeSO = $(CXX) -G $(Prof)
-MakeSOG = $(MakeSO) -g
-MakeSOO = $(MakeSO) -O3
+ifdef TOOLNAME
+Link += -rpath $(DESTTOOLCURRENT)
+endif
-# Create dependancy file from CPP file, send to stdout.
-Depend = $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
+# Create dependency file from CPP file, send to stdout.
+Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
+DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
# Archive a bunch of .o files into a .a file...
-AR = ar cq
-MakeLib = $(AR)
+AR = $(AR_PATH) cr
#----------------------------------------------------------
# Source includes all of the cpp files, and objects are derived from the
# source files...
+# The local Makefile can list other Source files via ExtraSource = ...
+#
ifndef Source
-Source = $(wildcard *.cpp *.c *.y *.l)
+Source := $(notdir $(ExtraSource) $(wildcard $(SourceDir)/*.cpp \
+ $(SourceDir)/*.cc $(SourceDir)/*.c $(SourceDir)/*.y \
+ $(SourceDir)/*.l))
endif
-Objs = $(addsuffix .o,$(basename $(Source)))
-ObjectsO = $(addprefix Release/,$(Objs))
-ObjectsG = $(addprefix Debug/,$(Objs))
+#
+# Libtool Objects
+#
+Srcs := $(sort $(basename $(Source)))
+ObjectsO := $(Srcs:%=$(BUILD_OBJ_DIR)/Release/%.lo)
+ObjectsP := $(Srcs:%=$(BUILD_OBJ_DIR)/Profile/%.lo)
+ObjectsG := $(Srcs:%=$(BUILD_OBJ_DIR)/Debug/%.lo)
+ObjectsBC := $(Srcs:%=$(BUILD_OBJ_DIR)/BytecodeObj/%.bc)
+
+#
+# The real objects underlying the libtool objects
+#
+RObjs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source)))))
+RObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(RObjs))
+RObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(RObjs))
+RObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(RObjs))
#---------------------------------------------------------
-# Handle the DIRS option
+# Handle the DIRS and PARALLEL_DIRS options
#---------------------------------------------------------
-ifdef DIRS # Only do this if we're using DIRS!
+ifdef DIRS
+all install clean test bytecode stripped-bytecode install-bytecode::
+ $(VERB) for dir in ${DIRS}; do \
+ if [ ! -f $$dir/Makefile ]; \
+ then \
+ $(MKDIR) $$dir; \
+ cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \
+ done
+endif
-all :: $(addsuffix /.makeall , $(DIRS))
-install :: $(addsuffix /.makeinstall, $(DIRS))
-clean :: $(addsuffix /.makeclean , $(DIRS))
+# Handle PARALLEL_DIRS
+ifdef PARALLEL_DIRS
+all :: $(addsuffix /.makeall , $(PARALLEL_DIRS))
+install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS))
+clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS))
+test :: $(addsuffix /.maketest , $(PARALLEL_DIRS))
+bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS))
+stripped-bytecode :: $(addsuffix /.makestripped-bytecode, $(PARALLEL_DIRS))
+install-bytecode :: $(addsuffix /.makeinstall-bytecode, $(PARALLEL_DIRS))
+
+%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode %/.makestripped-bytecode %/.makeinstall-bytecode:
+ $(VERB) if [ ! -f $(@D)/Makefile ]; \
+ then \
+ $(MKDIR) $(@D); \
+ cp $(SourceDir)/$(@D)/Makefile $(@D)/Makefile; \
+ fi; \
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) $(MFLAGS)
+endif
-%/.makeall %/.makeclean %/.makeinstall:
- cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
+# Handle directories that may or may not exist
+ifdef OPTIONAL_DIRS
+all install clean test bytecode stripped-bytecode install-bytecode::
+ $(VERB) for dir in ${OPTIONAL_DIRS}; do \
+ if [ -d $(SourceDir)/$$dir ]; \
+ then\
+ if [ ! -f $$dir/Makefile ]; \
+ then \
+ $(MKDIR) $$dir; \
+ cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \
+ fi \
+ done
endif
+###########################################################################
+# Library Build Rules:
+#
#---------------------------------------------------------
# Handle the LIBRARYNAME option - used when building libs...
#---------------------------------------------------------
+#
+# When libraries are built, they are allowed to optionally define the
+# DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file
+# from being built for the library. This .o files may then be linked to by a
+# tool if the tool does not need (or want) the semantics a .a file provides
+# (linking in only object files that are "needed"). If a library is never to
+# be used in this way, it is better to define DONT_BUILD_RELINKED, and define
+# BUILD_ARCHIVE instead.
+#
+# Some libraries must be built as .a files (libscalar for example) because if
+# it's built as a .o file, then all of the constituent .o files in it will be
+# linked into tools (for example gccas) even if they only use one of the parts
+# of it. For this reason, sometimes it's useful to use libraries as .a files.
+###########################################################################
+
+# Install rule for making bytecode library directory if it does not exist.
+# Trigger this by making libraries that need to be installed here depend on it.
+$(DESTDIR)$(bytecode_libdir):
+ $(MKDIR) $@
ifdef LIBRARYNAME
-LIBNAME_O := Release/lib$(LIBRARYNAME).so
-LIBNAME_G := Debug/lib$(LIBRARYNAME).so
-LIBNAME_AO := Release/lib$(LIBRARYNAME).a
-LIBNAME_AG := Debug/lib$(LIBRARYNAME).a
+# Make sure there isn't any extranous whitespace on the LIBRARYNAME option
+LIBRARYNAME := $(strip $(LIBRARYNAME))
+
+LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_CUR := $(DESTLIBCURRENT)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a
+LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a
+LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a
+LIBNAME_ACUR := $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a
+LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o
+LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o
+LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o
+LIBNAME_OBJCUR := $(DESTLIBCURRENT)/$(LIBRARYNAME).o
+LIBNAME_BC := $(DESTLIBBYTECODE)/lib$(LIBRARYNAME).bc
+
+
+#--------------------------------------------------------------------
+# Library Targets
+# Modify the top level targets to build the desired libraries.
+#--------------------------------------------------------------------
+
+# dynamic target builds a shared object version of the library...
+dynamic:: $(LIBNAME_CUR)
+bytecodelib:: $(LIBNAME_BC)
+install-bytecode-library:: $(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc
+
+$(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) $(DESTDIR)$(bytecode_libdir)
+ @${ECHO} ======= Installing $(LIBRARYNAME) bytecode library =======
+ cp $< $@
+
+# Does the library want a .o version built?
+ifndef DONT_BUILD_RELINKED
+all:: $(LIBNAME_OBJCUR)
+install:: install-single-object-library
+endif
+
+# Does the library want an archive version built?
+ifdef BUILD_ARCHIVE
+all:: $(LIBNAME_ACUR)
+install:: install-archive-library
+endif
+
+#--------------------------------------------------------------------
+# Rules for building libraries
+#--------------------------------------------------------------------
+
+LinkBCLib := $(LLVMGCC) -shared -nostdlib
+ifdef EXPORTED_SYMBOL_LIST
+LinkBCLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST)
+else
+ ifdef EXPORTED_SYMBOL_FILE
+LinkBCLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
+ else
+LinkBCLib += -Xlinker -disable-internalize
+ endif
+endif
+
+
+# Rule for building bytecode libraries.
+$(LIBNAME_BC): $(ObjectsBC) $(LibSubDirs) $(DESTLIBBYTECODE)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) bytecode library
+ $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) bytecode library =======
+#
+# Rules for building dynamically linked libraries.
+#
+$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) dynamic release library
+ $(VERB) $(Link) -o $*.la $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic release library =======
+
+$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) dynamic profile library
+ $(VERB) $(Link) -o $*.la $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic profile library =======
+
+$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) dynamic debug library
+ $(VERB) $(Link) -o $*.la $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic debug library =======
+
+install-dynamic-library: $(LIBNAME_CUR)
+ $(MKDIR) $(DESTDIR)$(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_CUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+
+#
+# Rules for building static archive libraries.
+#
+$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) archive release library
+ @$(RM) -f $@
+ $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static
+ @${ECHO} Finished building $(LIBRARYNAME) archive release library =======
+
+$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) archive profile library
+ @$(RM) -f $@
+ $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static
+ @${ECHO} ======= Finished building $(LIBRARYNAME) archive profile library =======
+
+$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
+ @${ECHO} Linking $(LIBRARYNAME) archive debug library
+ @$(RM) -f $@
+ $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static
+ @${ECHO} ======= Finished building $(LIBRARYNAME) archive debug library =======
+
+install-archive-library: $(LIBNAME_ACUR)
+ $(MKDIR) $(DESTDIR)$(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_ACUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a
+
+#
+# Rules for building .o libraries.
+#
+# JTC:
+# Note that for this special case, we specify the actual object files
+# instead of their libtool counterparts. This is because libtool
+# doesn't want to generate a reloadable object file unless it is given
+# .o files explicitly.
+#
+# Note that we're making an assumption here: If we build a .lo file,
+# it's corresponding .o file will be placed in the same directory.
+#
+# I think that is safe.
+#
+$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
+ @${ECHO} "Linking `basename $@`"
+ $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs)
+
+$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
+ @${ECHO} "Linking `basename $@`"
+ $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs)
+
+$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
+ @${ECHO} "Linking `basename $@`"
+ $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs)
+
+install-single-object-library: $(LIBNAME_OBJCUR)
+ $(MKDIR) $(DESTDIR)$(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_OBJCUR) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o
+
+endif
+
+#------------------------------------------------------------------------
+# Handle the TOOLNAME option - used when building tool executables...
+#------------------------------------------------------------------------
+#
+# The TOOLNAME option should be used with a USEDLIBS variable that tells the
+# libraries (and the order of the libs) that should be linked to the
+# tool. USEDLIBS should contain a list of library names (some with .a extension)
+# that are automatically linked in as .o files unless the .a suffix is added.
+#
+ifdef TOOLNAME
+
+# TOOLEXENAME* - These compute the output filenames to generate...
+TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME)
+TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME)
+TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME)
+TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME)
+
+# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
+PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS))
+PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
+PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS))
+
+LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS))
+LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
+LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS))
+
+LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G)
+LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O)
+LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P)
+
+# USED_LIB_PATHS - Compute the path of the libraries used so that tools are
+# rebuilt if libraries change. This has to make sure to handle .a/.so and .o
+# files separately.
+#
+STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS))
+USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS))
+
+#
+# Libtool link options:
+# Ensure that all binaries have their symbols exported so that they can
+# by dlsym'ed.
+#
+LINK_OPTS := -export-dynamic $(TOOLLINKOPTS)
+
-all:: $(LIBNAME_AG)
-# TODO: Enable optimized builds
-$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) Release/.dir Depend/.dir
- @echo ======= Linking $(LIBRARYNAME) release library =======
- $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) Debug/.dir Depend/.dir
- @echo ======= Linking $(LIBRARYNAME) debug library =======
- $(MakeSOG) -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
-$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) Release/.dir Depend/.dir
- @echo ======= Linking $(LIBRARYNAME) release library =======
- rm -f $@
- $(MakeLib) $@ $(ObjectsO) $(LibSubDirs)
+# Tell make that we need to rebuild subdirectories before we can link the tool.
+# This affects things like LLI which has library subdirectories.
+$(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \
+ $(addsuffix /.makeall, $(PARALLEL_DIRS))
+
+all:: $(TOOLEXENAMES)
+
+clean::
+ $(VERB) $(RM) -f $(TOOLEXENAMES)
-$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) Debug/.dir Depend/.dir
- @echo ======= Linking $(LIBRARYNAME) debug library =======
- rm -f $@
- $(MakeLib) $@ $(ObjectsG) $(LibSubDirs)
+$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir
+ @${ECHO} Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG)
+ $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS)
+ @${ECHO} ======= Finished building $(TOOLNAME) debug executable $(STRIP_WARN_MSG) =======
+
+$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir
+ @${ECHO} Linking $(TOOLNAME) release executable
+ $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS)
+ @${ECHO} ======= Finished building $(TOOLNAME) release executable =======
+
+$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir
+ @${ECHO} Linking $(TOOLNAME) profile executable
+ $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS)
+ @${ECHO} ======= Finished building $(TOOLNAME) profile executable =======
+
+install:: $(TOOLEXENAMES)
+ $(MKDIR) $(DESTDIR)$(bindir)
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) -c -m 0755 $(TOOLEXENAMES) $(DESTDIR)$(bindir)/$(TOOLNAME)
endif
+
#---------------------------------------------------------
+.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir $(BUILD_OBJ_DIR)/BytecodeObj/.dir
+.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir
+.PRECIOUS: $(BUILD_OBJ_DIR)/Profile/.dir
-# Create dependencies for the *.cpp files...
-Depend/%.d: %.cpp Depend/.dir
- $(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@
+# Create .lo files in the ObjectFiles directory from the .cpp and .c files...
+$(BUILD_OBJ_DIR)/Release/%.lo: %.cpp $(BUILD_OBJ_DIR)/Release/.dir
+ @${ECHO} "Compiling `basename $<`"
+ $(VERB) $(CompileO) $< -o $@
-# Create dependencies for the *.c files...
-Depend/%.d: %.c Depend/.dir
- $(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@
+$(BUILD_OBJ_DIR)/Release/%.lo: %.c $(BUILD_OBJ_DIR)/Release/.dir
+ @${ECHO} "Compiling `basename $<`"
+ $(VERB) $(CompileCO) $< -o $@
+
+$(BUILD_OBJ_DIR)/Profile/%.lo: %.cpp $(BUILD_OBJ_DIR)/Profile/.dir
+ @${ECHO} "Compiling `basename $<`"
+ $(VERB) $(CompileP) $< -o $@
+
+$(BUILD_OBJ_DIR)/Profile/%.lo: %.c $(BUILD_OBJ_DIR)/Profile/.dir
+ @${ECHO} "Compiling `basename $<`"
+ $(VERB) $(CompileCP) $< -o $@
+
+$(BUILD_OBJ_DIR)/Debug/%.lo: %.cpp $(BUILD_OBJ_DIR)/Debug/.dir
+ @${ECHO} "Compiling `basename $<`"
+ $(VERB) $(CompileG) $< -o $@
+
+$(BUILD_OBJ_DIR)/Debug/%.lo: %.c $(BUILD_OBJ_DIR)/Debug/.dir
+ @${ECHO} "Compiling `basename $<`"
+ $(VERB) $(CompileCG) $< -o $@
-# Create .o files in the ObjectFiles directory from the .cpp and .c files...
-Release/%.o: %.cpp Release/.dir Depend/.dir
- $(CompileO) $< -o $@
+$(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.cpp $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LCC1XX)
+ @${ECHO} "Compiling `basename $<` to bytecode"
+ $(VERB) $(LLVMGXX) $(CompileCommonOpts) $(CPPFLAGS) -c $< -o $@
-Release/%.o: %.c Release/.dir Depend/.dir
- $(CompileO) $< -o $@
+$(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.c $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LCC1)
+ @${ECHO} "Compiling `basename $<` to bytecode"
+ $(VERB) $(LLVMGCC) $(CompileCommonOpts) $(CPPFLAGS) -c $< -o $@
-Debug/%.o: %.cpp Debug/.dir Depend/.dir
- $(CompileG) $< -o $@
+$(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.ll $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LLVMAS)
+ @${ECHO} "Compiling `basename $<` to bytecode"
+ $(VERB) $(LLVMAS) $< -f -o $@
-Debug/%.o: %.c Debug/.dir Depend/.dir
- $(CompileG) $< -o $@
+
+#
+# Rules for building lex/yacc files
+#
+LEX_FILES = $(filter %.l, $(Source))
+LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp)
+YACC_FILES = $(filter %.y, $(Source))
+YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output)
+.PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT)
# Create a .cpp source file from a flex input file... this uses sed to cut down
# on the warnings emited by GCC...
+#
+# The last line is a gross hack to work around flex aparently not being able to
+# resize the buffer on a large token input. Currently, for uninitialized string
+# buffers in LLVM we can generate very long tokens, so this is a hack around it.
+# FIXME. (f.e. char Buffer[10000] )
+#
%.cpp: %.l
- flex -t $< | sed '/^find_rule/d' | sed 's/void yyunput/inline void yyunput/' | sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' > $@
+ @${ECHO} Flexing $<
+ $(VERB) $(FLEX) -t $< | \
+ $(SED) '/^find_rule/d' | \
+ $(SED) 's/void yyunput/inline void yyunput/' | \
+ $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
+ $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
+ > $@.tmp
+ $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@
+ @# remove the output of flex if it didn't get moved over...
+ @rm -f $@.tmp
# Rule for building the bison parsers...
-
+%.c: %.y # Cancel built-in rules for yacc
+%.h: %.y # Cancel built-in rules for yacc
%.cpp %.h : %.y
- bison -d -p $(<:%Parser.y=%) $(basename $@).y
- mv -f $(basename $@).tab.c $(basename $@).cpp
- mv -f $(basename $@).tab.h $(basename $@).h
+ @${ECHO} "Bisoning `basename $<`"
+ $(VERB) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
+ $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || ${MV} -f $*.tab.c $*.cpp
+ $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h
+ @# If the files were not updated, don't leave them lying around...
+ @rm -f $*.tab.c $*.tab.h
# To create the directories...
%/.dir:
- mkdir -p $(@D)
- @date > $@
+ $(VERB) ${MKDIR} $* > /dev/null
+ @$(DATE) > $@
+
+# To create postscript files from dot files...
+ifneq ($(DOT),false)
+%.ps: %.dot
+ ${DOT} -Tps < $< > $@
+else
+%.ps: %.dot
+ ${ECHO} "Cannot build $@: The program dot is not installed"
+endif
+
+#
+# This rules ensures that header files that are removed still have a rule for
+# which they can be "generated." This allows make to ignore them and
+# reproduce the dependency lists.
+#
+%.h:: ;
-# Clean does not remove the output files... just the temporaries
+# 'make clean' nukes the tree
clean::
- rm -rf Debug Release Depend
- rm -f core *.o *.d *.so *~ *.flc
+ $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release
+ $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend
+ $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/BytecodeObj
+ $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
+ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set
+ $(VERB) $(RM) -f *$(SHLIBEXT)
+endif
+ $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
+
+###########################################################################
+# C/C++ Dependencies
+# Define variables and rules that generate header file dependencies
+# from C/C++ source files.
+###########################################################################
+
+ifndef DISABLE_AUTO_DEPENDENCIES
+
+# If dependencies were generated for the file that included this file,
+# include the dependencies now...
+#
+SourceBaseNames := $(basename $(Source))
+SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d)
-# If dependancies were generated for the file that included this file,
-# include the dependancies now...
+# Create dependencies for the *.cpp files...
+$(BUILD_OBJ_DIR)/Depend/%.d: %.cpp $(BUILD_OBJ_DIR)/Depend/.dir
+ $(VERB) $(Depend) $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+
+# Create dependencies for the *.c files...
+$(BUILD_OBJ_DIR)/Depend/%.d: %.c $(BUILD_OBJ_DIR)/Depend/.dir
+ $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+
+#
+# Autoconf Dependencies.
#
-SourceDepend = $(addsuffix .d,$(addprefix Depend/,$(basename $(Source))))
-ifneq ($(SourceDepend),)
-include $(SourceDepend)
+$(LLVM_OBJ_ROOT)/config.status:: $(LLVM_SRC_ROOT)/configure
+ @${ECHO} "****************************************************************"
+ @${ECHO} " You need to re-run $(LLVM_SRC_ROOT)/configure"
+ @${ECHO} " in directory $(LLVM_OBJ_ROOT)"
+ @${ECHO} "****************************************************************"
+ $(VERB) exit 1
+
+# If the Makefile in the source tree has been updated, copy it over into the
+# build tree.
+Makefile :: $(BUILD_SRC_DIR)/Makefile
+ @${ECHO} "===== Updating Makefile from source dir: `dirname $<` ====="
+ $(MKDIR) $(@D)
+ cp -f $< $@
+
+#
+# Include dependencies generated from C/C++ source files, but not if we
+# are cleaning (this example taken from the GNU Make Manual).
+#
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),distclean)
+-include /dev/null $(SourceDepend)
endif
+endif
+
+endif # ifndef DISABLE_AUTO_DEPENDENCIES