#
# This file is distributed under the University of Illinois Open Source
# License. See LICENSE.TXT for details.
-#
+#
#===------------------------------------------------------------------------===#
#
# This file is included by all of the LLVM makefiles. For details on how to use
RecursiveTargets := all clean clean-all install uninstall install-bytecode
LocalTargets := all-local clean-local clean-all-local check-local \
install-local printvars uninstall-local \
- install-bytecode-local
+ install-bytecode-local unittests
TopLevelTargets := check dist dist-check dist-clean dist-gzip dist-bzip2 \
- dist-zip
+ dist-zip unittests
UserTargets := $(RecursiveTargets) $(LocalTargets) $(TopLevelTargets)
InternalTargets := preconditions distdir dist-hook
# Reset the list of suffixes we know how to build.
#--------------------------------------------------------------------
.SUFFIXES:
-.SUFFIXES: .c .cpp .cc .h .hpp .y .l .lo .o .a .bc .td .ps .dot .ll
+.SUFFIXES: .c .cpp .cc .h .hpp .lo .o .a .bc .td .ps .dot .ll
.SUFFIXES: $(SHLIBEXT) $(SUFFIXES)
#--------------------------------------------------------------------
.PHONY: $(UserTargets) $(InternalTargets)
#--------------------------------------------------------------------
-# Make sure all the user-target rules are double colon rules and
+# Make sure all the user-target rules are double colon rules and
# they are defined first.
#--------------------------------------------------------------------
clean-all:: clean-local clean-all-local
install:: install-local
uninstall:: uninstall-local
-install-local:: all-local
+install-local:: all-local
install-bytecode:: install-bytecode-local
###############################################################################
CPP.Defines += -D_DEBUG
endif
-# If ENABLE_EXPENSIVE_CHECKS=1 is specified (make command line or
-# configured), then enable expensive checks by defining the
+# If ENABLE_EXPENSIVE_CHECKS=1 is specified (make command line or
+# configured), then enable expensive checks by defining the
# appropriate preprocessor symbols.
ifdef ENABLE_EXPENSIVE_CHECKS
BuildMode := $(BuildMode)+Checks
TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
endif
endif
-LLVM_CONFIG := $(LLVMToolDir)/llvm-config
+LLVM_CONFIG := $(LLVMToolDir)/llvm-config
ifndef LLVMLD
LLVMLD := $(LLVMToolDir)/llvm-ld$(EXEEXT)
endif
# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is
# to be built. Note that if LOADABLE_MODULE is specified then the resulting
-# shared library can be opened with dlopen. Also, LOADABLE_MODULE implies
+# shared library can be opened with dlopen. Also, LOADABLE_MODULE implies
# several other things so we force them to be defined/on.
ifdef LOADABLE_MODULE
SHARED_LIBRARY := 1
AR.Flags += >/dev/null 2>/dev/null
ConfigureScriptFLAGS += >$(PROJ_OBJ_DIR)/configure.out 2>&1
else
- ConfigureScriptFLAGS :=
+ ConfigureScriptFLAGS :=
endif
# By default, strip symbol information from executable
CPP.BaseFlags += -include llvm/System/Solaris.h
endif
-LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
+LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
CPP.BaseFlags += -D_GNU_SOURCE -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS
# All -I flags should go here, so that they don't confuse llvm-config.
CPP.Flags += $(sort -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
LTRelink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Relink)
LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) \
$(Install.Flags)
-ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
-ScriptInstall = $(INSTALL) -m 0755
+ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
+ScriptInstall = $(INSTALL) -m 0755
DataInstall = $(INSTALL) -m 0644
# When compiling under Mingw/Cygwin, the tblgen tool expects Windows
endif
#----------------------------------------------------------
-# Get the list of source files and compute object file
-# names from them.
+# Get the list of source files and compute object file
+# names from them.
#----------------------------------------------------------
ifndef SOURCES
Sources := $(notdir $(wildcard $(PROJ_SRC_DIR)/*.cpp \
- $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c $(PROJ_SRC_DIR)/*.y \
- $(PROJ_SRC_DIR)/*.l))
+ $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c))
else
Sources := $(SOURCES)
-endif
+endif
ifdef BUILT_SOURCES
-Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES))
+Sources += $(filter %.cpp %.c %.cc,$(BUILT_SOURCES))
endif
BaseNameSources := $(sort $(basename $(Sources)))
# Handle the DIRS options for sequential construction
#---------------------------------------------------------
-SubDirs :=
+SubDirs :=
ifdef DIRS
SubDirs += $(DIRS)
#---------------------------------------------------------
# Define various command line options pertaining to the
-# libraries needed when linking. There are "Proj" libs
-# (defined by the user's project) and "LLVM" libs (defined
+# libraries needed when linking. There are "Proj" libs
+# (defined by the user's project) and "LLVM" libs (defined
# by the LLVM project).
#---------------------------------------------------------
install-module:: $(DestModule)
install-local:: $(DestModule)
-$(DestModule): $(ModuleDestDir) $(Module)
+$(DestModule): $(ModuleDestDir) $(Module)
$(Echo) Installing $(BuildMode) Bytecode Module $(DestModule)
$(Verb) $(DataInstall) $(Module) $(DestModule)
$(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib)
$(Verb) $(LIBTOOL) --finish $(PROJ_libdir)
-uninstall-local::
+uninstall-local::
$(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib)
-$(Verb) $(RM) -f $(PROJ_libdir)/lib$(LIBRARYNAME).*
endif
#---------------------------------------------------------
# Bytecode Library Targets:
# If the user asked for a bytecode library to be built
-# with the BYTECODE_LIBRARY variable, then we provide
+# with the BYTECODE_LIBRARY variable, then we provide
# targets for building them.
#---------------------------------------------------------
ifdef BYTECODE_LIBRARY
else
install-local:: $(DestBytecodeLib)
-$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA)
+$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA)
$(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib)
$(Verb) $(DataInstall) $(LibName.BCA) $(DestBytecodeLib)
#---------------------------------------------------------
# Archive Library Targets:
-# If the user wanted a regular archive library built,
+# If the user wanted a regular archive library built,
# then we provide targets for building them.
#---------------------------------------------------------
ifdef BUILD_ARCHIVE
endif
# endif LIBRARYNAME
-endif
+endif
###############################################################################
# Tool Build Rules: Build executable tool based on TOOLNAME option
$(Verb) $(LTLink) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
$(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
$(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
- $(StripWarnMsg)
+ $(StripWarnMsg)
ifdef NO_INSTALL
install-local::
endif
###############################################################################
-# Object Build Rules: Build object files based on sources
+# Object Build Rules: Build object files based on sources
###############################################################################
# FIXME: This should be checking for "if not GCC or ICC", not for "if HP-UX"
$< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
- $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_MSG,$@)
$(call UPGRADE_LL,$@)
$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi
- $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_MSG,$@)
$(call UPGRADE_LL,$@)
$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGCC)
$< -o $@ -S -emit-llvm ; \
then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \
else $(RM) -f "$(ObjDir)/$*.BCCd"; exit 1; fi
- $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_MSG,$@)
$(call UPGRADE_LL,$@)
# Provide alternate rule sets if dependencies are disabled
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cpp for $(BuildMode) build" $(PIC_FLAG)
- $(MAYBE_PIC_Compile.CXX) $< -o $@
+ $(MAYBE_PIC_Compile.CXX) $< -o $@
$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.cc for $(BuildMode) build" $(PIC_FLAG)
- $(MAYBE_PIC_Compile.CXX) $< -o $@
+ $(MAYBE_PIC_Compile.CXX) $< -o $@
$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
$(Echo) "Compiling $*.c for $(BuildMode) build" $(PIC_FLAG)
- $(MAYBE_PIC_Compile.C) $< -o $@
+ $(MAYBE_PIC_Compile.C) $< -o $@
$(ObjDir)/%.ll: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@ -S -emit-llvm
- $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_MSG,$@)
$(call UPGRADE_LL,$@)
$(ObjDir)/%.ll: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGXX)
$(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)"
$(BCCompile.CXX) $< -o $@ -S -emit-llvm
- $(call UPGRADE_MSG,$@)
+ $(call UPGRADE_MSG,$@)
$(call UPGRADE_LL,$@)
$(ObjDir)/%.ll: %.c $(ObjDir)/.dir $(BUILT_SOURCES) $(LLVMGCC)
$(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)"
$(BCCompile.C) $< -o $@ -S -emit-llvm
- $(call UPGRADE_MSG,@)
+ $(call UPGRADE_MSG,@)
$(call UPGRADE_LL,@)
endif
# All of these files depend on tblgen and the .td files.
$(INCTMPFiles) : $(TBLGEN) $(TDFiles)
-# INCFiles rule: All of the tblgen generated files are emitted to
+# INCFiles rule: All of the tblgen generated files are emitted to
# $(ObjDir)/%.inc.tmp, instead of emitting them directly to %.inc. This allows
# us to only "touch" the real file if the contents of it change. IOW, if
# tblgen is modified, all of the .inc.tmp files are regenerated, but no
$(TARGET:%=$(ObjDir)/%GenAsmWriter1.inc.tmp): \
$(ObjDir)/%GenAsmWriter1.inc.tmp : %.td $(ObjDir)/.dir
$(Echo) "Building $(<F) assembly writer #1 with tblgen"
- $(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $(call SYSPATH, $@) $<
+ $(Verb) $(TableGen) -gen-asm-writer -asmwriternum=1 -o $(call SYSPATH, $@) $<
$(TARGET:%=$(ObjDir)/%GenCodeEmitter.inc.tmp): \
$(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir
endif
-###############################################################################
-# LEX AND YACC: Provide rules for generating sources with lex and yacc
-###############################################################################
-
-#---------------------------------------------------------
-# Provide rules for generating a .cpp source file from
-# (f)lex input sources.
-#---------------------------------------------------------
-
-LexFiles := $(filter %.l,$(Sources))
-
-ifneq ($(LexFiles),)
-
-# Cancel built-in rules for lex
-%.c: %.l
-%.cpp: %.l
-
-all:: $(LexFiles:%.l=$(PROJ_SRC_DIR)/%.cpp.cvs)
-
-# Note the extra sed filtering here, used to cut down on the warnings emited
-# by GCC. The last line is a gross hack to work around flex aparently not
-# being able to resize the buffer on a large token input. Currently, for
-# uninitialized string buffers in LLVM we can generate very long tokens, so
-# this is a hack around it.
-# FIXME. (f.e. char Buffer[10000] )
-$(PROJ_SRC_DIR)/%.cpp: $(PROJ_SRC_DIR)/%.l
- $(Echo) Flexing $*.l
- $(Verb) $(FLEX) -t $(PROJ_SRC_DIR)/$*.l | \
- $(SED) 's/void yyunput/inline void yyunput/' | \
- $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
- $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
- > $(PROJ_SRC_DIR)/$*.cpp
-
-# IFF the .l file has changed since it was last checked into SVN, copy the .l
-# file to .l.cvs and the generated .cpp file to .cpp.cvs. We use this mechanism
-# so that people without flex can build LLVM by copying the .cvs files to the
-# source location and building them.
-$(LexFiles:%.l=$(PROJ_SRC_DIR)/%.cpp.cvs): \
-$(PROJ_SRC_DIR)/%.cpp.cvs: $(PROJ_SRC_DIR)/%.cpp
- $(Verb) $(CMP) -s $(PROJ_SRC_DIR)/$*.l $(PROJ_SRC_DIR)/$*.l.cvs || \
- ($(CP) $< $@; $(CP) $(PROJ_SRC_DIR)/$*.l $(PROJ_SRC_DIR)/$*.l.cvs)
-
-$(LexFiles:%.l=$(ObjDir)/%.o) : \
-$(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
-
-clean-local::
- -$(Verb) $(RM) -f $(LexOutput)
-
-endif
-
-#---------------------------------------------------------
-# Provide rules for generating a .cpp and .h source files
-# from yacc (bison) input sources.
-#---------------------------------------------------------
-
-YaccFiles := $(filter %.y,$(Sources))
-ifneq ($(YaccFiles),)
-
-.PRECIOUS: $(YaccOutput)
-
-all:: $(YaccFiles:%.y=$(PROJ_SRC_DIR)/%.cpp.cvs)
-
-# Cancel built-in rules for yacc
-%.c: %.y
-%.cpp: %.y
-%.h: %.y
-
-# Rule for building the bison based parsers...
-ifneq ($(BISON),)
-$(PROJ_SRC_DIR)/%.cpp $(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.y
- $(Echo) "Bisoning $*.y"
- $(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
- $(Verb) $(MV) -f $*.tab.c $(PROJ_SRC_DIR)/$*.cpp
- $(Verb) $(MV) -f $*.tab.h $(PROJ_SRC_DIR)/$*.h
-
-# IFF the .y file has changed since it was last checked into SVN, copy the .y
-# file to .y.cvs and the generated .cpp/.h file to .cpp.cvs/.h.cvs. We use this
-# mechanism so that people without flex can build LLVM by copying the .cvs files
-# to the source location and building them.
-$(YaccFiles:%.y=$(PROJ_SRC_DIR)/%.cpp.cvs): \
-$(PROJ_SRC_DIR)/%.cpp.cvs: $(PROJ_SRC_DIR)/%.cpp
- $(Verb) $(CMP) -s $(PROJ_SRC_DIR)/$*.y $(PROJ_SRC_DIR)/$*.y.cvs || \
- ($(CP) $< $@; \
- $(CP) $(PROJ_SRC_DIR)/$*.y $(PROJ_SRC_DIR)/$*.y.cvs; \
- $(CP) $(PROJ_SRC_DIR)/$*.h $(PROJ_SRC_DIR)/$*.h.cvs)
-
-else
-$(PROJ_SRC_DIR)/%.cpp : $(PROJ_SRC_DIR)/%.cpp.cvs
- $(Echo) "Bison of $*.y SKIPPED, bison not found -- copying .cpp.cvs"
- $(Verb)$(CP) $(PROJ_SRC_DIR)/$*.cpp.cvs $(PROJ_SRC_DIR)/$*.cpp
-
-$(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.h.cvs
- $(Echo) "Bison of $*.y SKIPPED, bison not found -- copying .h.cvs"
- $(Verb)$(CP) $(PROJ_SRC_DIR)/$*.h.cvs $(PROJ_SRC_DIR)/$*.h
-endif
-
-
-$(YaccFiles:%.y=$(ObjDir)/%.o): $(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
-
-YaccOutput := $(YaccFiles:%.y=%.output)
-
-clean-local::
- -$(Verb) $(RM) -f $(YaccOutput)
-endif
-
###############################################################################
# OTHER RULES: Other rules needed
###############################################################################
%.hpp:: ;
# Define clean-local to clean the current directory. Note that this uses a
-# very conservative approach ensuring that empty variables do not cause
+# very conservative approach ensuring that empty variables do not cause
# errors or disastrous removal.
clean-local::
ifneq ($(strip $(ObjRootDir)),)
endif
-endif
+endif
###############################################################################
# CHECK: Running the test suite
$(EchoCmd) No test directory ; \
fi
+###############################################################################
+# UNITTESTS: Running the unittests test suite
+###############################################################################
+
+unittests::
+ $(Verb) if test -d "$(PROJ_OBJ_ROOT)/unittests" ; then \
+ if test -f "$(PROJ_OBJ_ROOT)/unittests/Makefile" ; then \
+ $(EchoCmd) Running unittests test suite ; \
+ $(MAKE) -C $(PROJ_OBJ_ROOT)/unittests ; \
+ else \
+ $(EchoCmd) No Makefile in unittests directory ; \
+ fi ; \
+ else \
+ $(EchoCmd) No unittests directory ; \
+ fi
+
###############################################################################
# DISTRIBUTION: Handle construction of a distribution tarball
###############################################################################
$(Verb) rm -f $(DistZip)
$(Verb) cd $(PROJ_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName)
-dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
+dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip)
$(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL =====
DistCheckDir := $(PROJ_OBJ_ROOT)/_distcheckdir
--srcdir=../$(DistName) $(DIST_CHECK_CONFIG_OPTIONS) && \
$(MAKE) all && \
$(MAKE) check && \
+ $(MAKE) unittests && \
$(MAKE) install && \
$(MAKE) uninstall && \
$(MAKE) dist-clean && \
$(MAKE) ENABLE_OPTIMIZED=1 all ; \
fi
$(Echo) Building Distribution Directory $(DistDir)
- $(Verb) $(MKDIR) $(DistDir)
+ $(Verb) $(MKDIR) $(DistDir)
$(Verb) srcdirstrip=`echo "$(PROJ_SRC_DIR)" | sed 's|.|.|g'`; \
srcrootstrip=`echo "$(PROJ_SRC_ROOT)" | sed 's|.|.|g'`; \
for file in $(DistFiles) ; do \
$(Verb) $(MKDIR) $(PROJ_includedir)
$(Verb) if test -d "$(PROJ_SRC_ROOT)/include" ; then \
cd $(PROJ_SRC_ROOT)/include && \
- for hdr in `find . -type f '!' '(' -name '*~' -o -name '.cvsignore' \
+ for hdr in `find . -type f '!' '(' -name '*~' \
-o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS | \
grep -v .svn` ; do \
instdir=`dirname "$(PROJ_includedir)/$$hdr"` ; \
$(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \
cd $(PROJ_SRC_ROOT)/include && \
$(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \
- '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' \
+ '!' '(' -name '*~' -o -name '.#*' \
-o -name '*.in' ')' -print ')' | \
grep -v CVS | sed 's#^#$(PROJ_includedir)/#'` ; \
cd $(PROJ_SRC_ROOT)/include && \