config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_CPU_IDLE_WAIT
+ bool
+ default y
+
+config ARCH_HAS_DEFAULT_IDLE
+ bool
+ default y
+
config ARCH_HAS_ILOG2_U32
bool
help
Setting ARM L1 cache line size to 64 Bytes.
+config ARCH_PROVIDES_UDELAY
+ bool
+
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_HAS_BARRIERS if CACHE_L2X0
+ select ARCH_HAS_CPUFREQ
+ select ARCH_PROVIDES_UDELAY
+ select FIQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
+config ARM_ERRATA_742230
+ bool "ARM errata: DMB operation may be faulty"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 742230 Cortex-A9
+ (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+ between two write operations may not ensure the correct visibility
+ ordering of the two writes. This workaround sets a specific bit in
+ the diagnostic register of the Cortex-A9 which causes the DMB
+ instruction to behave as a DSB, ensuring the correct behaviour of
+ the two writes.
+
+config ARM_ERRATA_742231
+ bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 742231 Cortex-A9
+ (r2p0..r2p2) erratum. Under certain conditions, specific to the
+ Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+ accessing some data located in the same cache line, may get corrupted
+ data due to bad handling of the address hazard when the line gets
+ replaced from one of the CPUs at the same time as another CPU is
+ accessing it. This workaround sets specific bits in the diagnostic
+ register of the Cortex-A9 which reduces the linefill issuing
+ capabilities of the processor.
+
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
-config ZRELADDR
- hex "Physical address of the decompressed kernel image"
- depends on !AUTO_ZRELADDR
- default 0x00008000 if ARCH_BCMRING ||\
- ARCH_CNS3XXX ||\
- ARCH_DOVE ||\
- ARCH_EBSA110 ||\
- ARCH_FOOTBRIDGE ||\
- ARCH_INTEGRATOR ||\
- ARCH_IOP13XX ||\
- ARCH_IOP33X ||\
- ARCH_IXP2000 ||\
- ARCH_IXP23XX ||\
- ARCH_IXP4XX ||\
- ARCH_KIRKWOOD ||\
- ARCH_KS8695 ||\
- ARCH_LOKI ||\
- ARCH_MMP ||\
- ARCH_MV78XX0 ||\
- ARCH_NOMADIK ||\
- ARCH_NUC93X ||\
- ARCH_NS9XXX ||\
- ARCH_ORION5X ||\
- ARCH_SPEAR3XX ||\
- ARCH_SPEAR6XX ||\
- ARCH_U8500 ||\
- ARCH_VERSATILE ||\
- ARCH_W90X900
- default 0x08008000 if ARCH_MX1 ||\
- ARCH_SHARK
- default 0x10008000 if ARCH_MSM ||\
- ARCH_OMAP1 ||\
- ARCH_RPC
- default 0x20008000 if ARCH_S5P6440 ||\
- ARCH_S5P6442 ||\
- ARCH_S5PC100 ||\
- ARCH_S5PV210
- default 0x30008000 if ARCH_S3C2410 ||\
- ARCH_S3C2400 ||\
- ARCH_S3C2412 ||\
- ARCH_S3C2416 ||\
- ARCH_S3C2440 ||\
- ARCH_S3C2443
- default 0x40008000 if ARCH_STMP378X ||\
- ARCH_STMP37XX ||\
- ARCH_SH7372 ||\
- ARCH_SH7377
- default 0x50008000 if ARCH_S3C64XX ||\
- ARCH_SH7367
- default 0x60008000 if ARCH_VEXPRESS
- default 0x80008000 if ARCH_MX25 ||\
- ARCH_MX3 ||\
- ARCH_NETX ||\
- ARCH_OMAP2PLUS ||\
- ARCH_PNX4008
- default 0x90008000 if ARCH_MX5 ||\
- ARCH_MX91231
- default 0xa0008000 if ARCH_IOP32X ||\
- ARCH_PXA ||\
- MACH_MX27
- default 0xc0008000 if ARCH_LH7A40X ||\
- MACH_MX21
- default 0xf0008000 if ARCH_AAEC2000 ||\
- ARCH_L7200
- default 0xc0028000 if ARCH_CLPS711X
- default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
- default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
- default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
- default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
- default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
- default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
- default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
- default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
- default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
- default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
- default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
- default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
- default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
- default 0xc0208000 if ARCH_SA1100 && SA1111
- default 0xc0008000 if ARCH_SA1100 && !SA1111
- default 0x30108000 if ARCH_S3C2410 && PM_H1940
- default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
- default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
- help
- ZRELADDR is the physical address where the decompressed kernel
- image will be placed. ZRELADDR has to be specified when the
- assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
- selected.
-
endmenu
menu "CPU Power Management"