ARM: dts: enable SD and GMAC at rk3288-evb

[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / rk3288.dtsi

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index de907f977f4e2903ad84a641630036cfdb35772f..422760e63814122de5b830db0c836d527611da75 100644 (file)
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -493,6 +494,7 @@
                        "aclk_mac", "pclk_mac";
                resets = <&cru SRST_MAC>;
                reset-names = "stmmaceth";
+               max-speed = <100>;
                status = "disabled";
        };
 
@@ -728,6 +730,16 @@
                                clocks = <&cru ACLK_GPU>;
                        };
                };
+
+               reboot-mode {
+                       compatible = "syscon-reboot-mode";
+                       offset = <0x94>;
+                       mode-normal = <BOOT_NORMAL>;
+                       mode-recovery = <BOOT_RECOVERY>;
+                       mode-bootloader = <BOOT_FASTBOOT>;
+                       mode-loader = <BOOT_LOADER>;
+                       mode-ums = <BOOT_UMS>;
+               };
        };
 
        sgrf: syscon@ff740000 {
@@ -777,7 +789,7 @@
                clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
                dmas = <&dmac_bus_s 3>;
                dma-names = "tx";
-               interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+               interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&spdif_tx>;
                rockchip,grf = <&grf>;
@@ -787,7 +799,7 @@
        i2s: i2s@ff890000 {
                compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
                reg = <0xff890000 0x10000>;
-               interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+               interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
                #address-cells = <1>;
                #size-cells = <0>;
                dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;