ARM: sun4i: dt: Add USB host nodes to hackberry dts

[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / sun4i-a10-hackberry.dts

diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 6692d336335d172b2eb1cffc30a84892d07c8708..d7c17e46ce23096aafe13f88c7d480ebdea83d32 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
        model = "Miniand Hackberry";
@@ -35,6 +36,28 @@
                        };
                };
 
+               usbphy: phy@01c13400 {
+                       usb1_vbus-supply = <&reg_usb1_vbus>;
+                       usb2_vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
+               ehci0: usb@01c14000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@01c14400 {
+                       status = "okay";
+               };
+
+               ehci1: usb@01c1c000 {
+                       status = "okay";
+               };
+
+               ohci1: usb@01c1c400 {
+                       status = "okay";
+               };
+
                pio: pinctrl@01c20800 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&hackberry_hogs>;
@@ -45,6 +68,13 @@
                                allwinner,drive = <0>;
                                allwinner,pull = <0>;
                        };
+
+                       usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+                                       allwinner,pins = "PH12";
+                                       allwinner,function = "gpio_out";
+                                       allwinner,drive = <0>;
+                                       allwinner,pull = <0>;
+                       };
                };
 
                uart0: serial@01c28000 {
@@ -62,4 +92,14 @@
                enable-active-high;
                gpio = <&pio 7 19 0>;
        };
+
+       reg_usb1_vbus: usb1-vbus {
+               status = "okay";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+               gpio = <&pio 7 12 0>;
+               status = "okay";
+       };
 };