#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/usb/musb.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
#include "soc.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
}
-static struct gpio sdp4430_hdmi_gpios[] = {
- { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
- { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
- { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
- int status;
-
- status = gpio_request_array(sdp4430_hdmi_gpios,
- ARRAY_SIZE(sdp4430_hdmi_gpios));
- if (status)
- pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
-
- return status;
-}
-
-static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
- gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
-}
-
static struct nokia_dsi_panel_data dsi1_panel = {
.name = "taal",
.reset_gpio = 102,
.phy.dsi = {
.module = 0,
},
-
- .clocks = {
- .dispc = {
- .channel = {
- /* Logic Clock = 172.8 MHz */
- .lck_div = 1,
- /* Pixel Clock = 34.56 MHz */
- .pck_div = 5,
- .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
- },
- .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
- },
-
- .dsi = {
- .regn = 16, /* Fint = 2.4 MHz */
- .regm = 180, /* DDR Clock = 216 MHz */
- .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
- .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
-
- .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
- .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
- },
- },
.channel = OMAP_DSS_CHANNEL_LCD,
};
.module = 1,
},
-
- .clocks = {
- .dispc = {
- .channel = {
- /* Logic Clock = 172.8 MHz */
- .lck_div = 1,
- /* Pixel Clock = 34.56 MHz */
- .pck_div = 5,
- .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
- },
- .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
- },
-
- .dsi = {
- .regn = 16, /* Fint = 2.4 MHz */
- .regm = 180, /* DDR Clock = 216 MHz */
- .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
- .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
-
- .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
- .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
- },
- },
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+ .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+ .ls_oe_gpio = HDMI_GPIO_LS_OE,
.hpd_gpio = HDMI_GPIO_HPD,
};
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
- .platform_enable = sdp4430_panel_enable_hdmi,
- .platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &sdp4430_hdmi_data,
};
/* NIRQ2 for twl6040 */
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ /* GPIO_127 for twl6040 */
+ OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ /* McPDM */
+ OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ /* DMIC */
+ OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* McBSP1 */
+ OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* McBSP2 */
+ OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};