#include <mach/gpio.h>
#include <mach/iomux.h>
#include <linux/fb.h>
+#include <linux/regulator/machine.h>
+#include <linux/rfkill-rk.h>
+#include <linux/sensor-dev.h>
#if defined(CONFIG_HDMI_RK30)
#include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
#endif
#if defined(CONFIG_SPIM_RK29)
#include "../../../drivers/spi/rk29_spim.h"
#endif
+#if defined(CONFIG_MU509)
+#include <linux/mu509.h>
+#endif
+#if defined(CONFIG_MW100)
+#include <linux/mw100.h>
+#endif
+#if defined(CONFIG_MT6229)
+#include <linux/mt6229.h>
+#endif
+#if defined(CONFIG_SEW868)
+#include <linux/sew868.h>
+#endif
#if defined(CONFIG_ANDROID_TIMED_GPIO)
#include "../../../drivers/staging/android/timed_gpio.h"
#endif
+#if defined(CONFIG_MT6620)
+#include <linux/gps.h>
+#endif
+
+#ifdef CONFIG_THREE_FB_BUFFER
+#define RK30_FB0_MEM_SIZE 12*SZ_1M
+#else
#define RK30_FB0_MEM_SIZE 8*SZ_1M
+#endif
#ifdef CONFIG_VIDEO_RK29
/*---------------- Camera Sensor Macro Define Begin ------------------------*/
* author: ddl@rock-chips.com
*****************************************************************************************/
#ifdef CONFIG_VIDEO_RK29
-#define CONFIG_SENSOR_POWER_IOCTL_USR 0
+#define CONFIG_SENSOR_POWER_IOCTL_USR 1 //define this refer to your board layout
#define CONFIG_SENSOR_RESET_IOCTL_USR 0
#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
#define CONFIG_SENSOR_FLASH_IOCTL_USR 0
+static void rk_cif_power(int on)
+{
+ struct regulator *ldo_18,*ldo_28;
+ ldo_28 = regulator_get(NULL, "ldo7"); // vcc28_cif
+ ldo_18 = regulator_get(NULL, "ldo1"); // vcc18_cif
+ if (ldo_28 == NULL || IS_ERR(ldo_28) || ldo_18 == NULL || IS_ERR(ldo_18)){
+ printk("get cif ldo failed!\n");
+ return;
+ }
+ if(on == 0){
+ regulator_disable(ldo_28);
+ regulator_put(ldo_28);
+ regulator_disable(ldo_18);
+ regulator_put(ldo_18);
+ mdelay(500);
+ }
+ else{
+ regulator_set_voltage(ldo_28, 2800000, 2800000);
+ regulator_enable(ldo_28);
+ // printk("%s set ldo7 vcc28_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_28));
+ regulator_put(ldo_28);
+
+ regulator_set_voltage(ldo_18, 1800000, 1800000);
+ // regulator_set_suspend_voltage(ldo, 1800000);
+ regulator_enable(ldo_18);
+ // printk("%s set ldo1 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_18));
+ regulator_put(ldo_18);
+ }
+}
+
#if CONFIG_SENSOR_POWER_IOCTL_USR
static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on)
{
- #error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
+ //#error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
+ rk_cif_power(on);
}
#endif
}
};
#endif
+#if defined(CONFIG_MU509)
+static int mu509_io_init(void)
+{
+
+ rk30_mux_api_set(GPIO2B6_LCDC1DATA14_SMCADDR18_TSSYNC_NAME, GPIO2B_GPIO2B6);
+ rk30_mux_api_set(GPIO4D2_SMCDATA10_TRACEDATA10_NAME, GPIO4D_GPIO4D2);
+ rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
+ rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
+ return 0;
+}
+
+static int mu509_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk29_mu509_data rk29_mu509_info = {
+ .io_init = mu509_io_init,
+ .io_deinit = mu509_io_deinit,
+ .modem_power_en = RK30_PIN6_PB2,//RK30_PIN4_PD1,
+ .bp_power = RK30_PIN2_PB6,//RK30_PIN4_PD1,
+ .bp_reset = RK30_PIN4_PD2,
+ .ap_wakeup_bp = RK30_PIN2_PB7,
+ .bp_wakeup_ap = RK30_PIN6_PA0,
+};
+struct platform_device rk29_device_mu509 = {
+ .name = "mu509",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_mu509_info,
+ }
+ };
+#endif
+#if defined(CONFIG_MW100)
+static int mw100_io_init(void)
+{
+ rk30_mux_api_set(GPIO2B6_LCDC1DATA14_SMCADDR18_TSSYNC_NAME, GPIO2B_GPIO2B6);
+ rk30_mux_api_set(GPIO4D2_SMCDATA10_TRACEDATA10_NAME, GPIO4D_GPIO4D2);
+ rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
+ rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
+ return 0;
+}
+
+static int mw100_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk29_mw100_data rk29_mw100_info = {
+ .io_init = mw100_io_init,
+ .io_deinit = mw100_io_deinit,
+ .modem_power_en = RK30_PIN6_PB2,
+ .bp_power = RK30_PIN2_PB6,
+ .bp_reset = RK30_PIN4_PD2,
+ .ap_wakeup_bp = RK30_PIN2_PB7,
+ .bp_wakeup_ap = RK30_PIN6_PA0,
+};
+struct platform_device rk29_device_mw100 = {
+ .name = "mw100",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_mw100_info,
+ }
+ };
+#endif
+#if defined(CONFIG_MT6229)
+static int mt6229_io_init(void)
+{
+ rk30_mux_api_set(GPIO2B6_LCDC1DATA14_SMCADDR18_TSSYNC_NAME, GPIO2B_GPIO2B6);
+ rk30_mux_api_set(GPIO4D2_SMCDATA10_TRACEDATA10_NAME, GPIO4D_GPIO4D2);
+ rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
+ rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
+ return 0;
+}
+
+static int mt6229_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk29_mt6229_data rk29_mt6229_info = {
+ .io_init = mt6229_io_init,
+ .io_deinit = mt6229_io_deinit,
+ .modem_power_en = RK30_PIN6_PB2,
+ .bp_power = RK30_PIN2_PB7,
+ .bp_reset = RK30_PIN4_PD2,
+ .ap_wakeup_bp = RK30_PIN2_PC0,
+ .bp_wakeup_ap = RK30_PIN6_PA0,
+};
+struct platform_device rk29_device_mt6229 = {
+ .name = "mt6229",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_mt6229_info,
+ }
+ };
+#endif
+#if defined(CONFIG_SEW868)
+static int sew868_io_init(void)
+{
+ rk30_mux_api_set(GPIO2B6_LCDC1DATA14_SMCADDR18_TSSYNC_NAME, GPIO2B_GPIO2B6);
+ rk30_mux_api_set(GPIO4D2_SMCDATA10_TRACEDATA10_NAME, GPIO4D_GPIO4D2);
+ rk30_mux_api_set(GPIO4D4_SMCDATA12_TRACEDATA12_NAME, GPIO4D_GPIO4D4);
+ return 0;
+}
+static int sew868_io_deinit(void)
+{
+ return 0;
+}
+struct rk30_sew868_data rk30_sew868_info = {
+ .io_init = sew868_io_init,
+ .io_deinit = sew868_io_deinit,
+ .bp_power = RK30_PIN6_PB2,
+ .bp_power_active_low = 1,
+ .bp_sys = RK30_PIN2_PB6,
+ .bp_reset = RK30_PIN4_PD2,
+ .bp_reset_active_low = 1,
+ .bp_wakeup_ap = RK30_PIN4_PD4,
+ .ap_wakeup_bp = NULL,
+};
+
+struct platform_device rk30_device_sew868 = {
+ .name = "sew868",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk30_sew868_info,
+ }
+ };
+#endif
/*MMA8452 gsensor*/
#if defined (CONFIG_GS_MMA8452)
{
rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
- if (gpio_request(MMA8452_INT_PIN, NULL) != 0) {
- gpio_free(MMA8452_INT_PIN);
- printk("mma8452_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(MMA8452_INT_PIN, 1);
return 0;
}
-static struct mma8452_platform_data mma8452_info = {
- .model = 8452,
- .swap_xy = 0,
- .swap_xyz = 1,
- .init_platform_hw = mma8452_init_platform_hw,
+static struct sensor_platform_data mma8452_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = mma8452_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+#if defined (CONFIG_GS_LIS3DH)
+#define LIS3DH_INT_PIN RK30_PIN4_PC0
+
+static int lis3dh_init_platform_hw(void)
+{
+ rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
+
+ return 0;
+}
+
+static struct sensor_platform_data lis3dh_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = lis3dh_init_platform_hw,
.orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
};
+#endif
+#if defined (CONFIG_GS_KXTIK)
+#define KXTIK_INT_PIN RK30_PIN4_PC0
+
+static int kxtik_init_platform_hw(void)
+{
+ rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
+
+ return 0;
+}
+
+static struct sensor_platform_data kxtik_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = kxtik_init_platform_hw,
+ .orientation = {0, 1, 0, 0, 0, -1, 1, 0, 0},
+};
+
#endif
#if defined (CONFIG_COMPASS_AK8975)
-static struct akm8975_platform_data akm8975_info =
+static struct sensor_platform_data akm8975_info =
{
+ .type = SENSOR_TYPE_COMPASS,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
.m_layout =
{
{
{1, 0, 0},
- {0, 0, 1},
{0, 1, 0},
+ {0, 0, 1},
},
{
return 0;
}
-static struct l3g4200d_platform_data l3g4200d_info = {
+static struct sensor_platform_data l3g4200d_info = {
+ .type = SENSOR_TYPE_GYROSCOPE,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
.orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
- .init = l3g4200d_init_platform_hw,
+ .init_platform_hw = l3g4200d_init_platform_hw,
.x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware
.y_min = 40,
.z_min = 20,
#endif
#ifdef CONFIG_LS_CM3217
+static struct sensor_platform_data cm3217_info = {
+ .type = SENSOR_TYPE_LIGHT,
+ .irq_enable = 0,
+ .poll_delay_ms = 500,
+};
-#define CM3217_POWER_PIN INVALID_GPIO
-#define CM3217_IRQ_PIN INVALID_GPIO
-static int cm3217_init_hw(void)
-{
-#if 0
- if (gpio_request(CM3217_POWER_PIN, NULL) != 0) {
- gpio_free(CM3217_POWER_PIN);
- printk("%s: request cm3217 power pin error\n", __func__);
- return -EIO;
- }
- gpio_pull_updown(CM3217_POWER_PIN, PullDisable);
+#endif
- if (gpio_request(CM3217_IRQ_PIN, NULL) != 0) {
- gpio_free(CM3217_IRQ_PIN);
- printk("%s: request cm3217 int pin error\n", __func__);
- return -EIO;
- }
- gpio_pull_updown(CM3217_IRQ_PIN, PullDisable);
+#if defined(CONFIG_PS_AL3006)
+static struct sensor_platform_data proximity_al3006_info = {
+ .type = SENSOR_TYPE_PROXIMITY,
+ .irq_enable = 1,
+ .poll_delay_ms = 200,
+};
#endif
- return 0;
-}
-static void cm3217_exit_hw(void)
-{
-#if 0
- gpio_free(CM3217_POWER_PIN);
- gpio_free(CM3217_IRQ_PIN);
+#if defined(CONFIG_PS_STK3171)
+static struct sensor_platform_data proximity_stk3171_info = {
+ .type = SENSOR_TYPE_PROXIMITY,
+ .irq_enable = 1,
+ .poll_delay_ms = 200,
+};
#endif
- return;
-}
-static struct cm3217_platform_data cm3217_info = {
- .irq_pin = CM3217_IRQ_PIN,
- .power_pin = CM3217_POWER_PIN,
- .init_platform_hw = cm3217_init_hw,
- .exit_platform_hw = cm3217_exit_hw,
+
+#if defined(CONFIG_LS_AL3006)
+static struct sensor_platform_data light_al3006_info = {
+ .type = SENSOR_TYPE_LIGHT,
+ .irq_enable = 1,
+ .poll_delay_ms = 200,
};
#endif
+#if defined(CONFIG_LS_STK3171)
+static struct sensor_platform_data light_stk3171_info = {
+ .type = SENSOR_TYPE_LIGHT,
+ .irq_enable = 1,
+ .poll_delay_ms = 200,
+};
+#endif
#ifdef CONFIG_FB_ROCKCHIP
+#define LCD_CS_MUX_NAME GPIO4C7_SMCDATA7_TRACEDATA7_NAME
+#define LCD_CS_PIN RK30_PIN4_PC7
+#define LCD_CS_VALUE GPIO_HIGH
+
#define LCD_EN_MUX_NAME GPIO4C7_SMCDATA7_TRACEDATA7_NAME
-#define LCD_EN_PIN RK30_PIN4_PC7
-#define LCD_EN_VALUE GPIO_HIGH
+#define LCD_EN_PIN RK30_PIN6_PB4
+#define LCD_EN_VALUE GPIO_LOW
static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
{
int ret = 0;
- rk30_mux_api_set(LCD_EN_MUX_NAME, GPIO4C_GPIO4C7);
+ rk30_mux_api_set(LCD_CS_MUX_NAME, GPIO4C_GPIO4C7);
+ ret = gpio_request(LCD_CS_PIN, NULL);
+ if (ret != 0)
+ {
+ gpio_free(LCD_CS_PIN);
+ printk(KERN_ERR "request lcd cs pin fail!\n");
+ return -1;
+ }
+ else
+ {
+ gpio_direction_output(LCD_CS_PIN, LCD_CS_VALUE);
+ }
ret = gpio_request(LCD_EN_PIN, NULL);
if (ret != 0)
{
}
else
{
- gpio_direction_output(LCD_EN_PIN, 1);
- gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
+ gpio_direction_output(LCD_EN_PIN, LCD_EN_VALUE);
}
return 0;
}
static int rk_fb_io_disable(void)
{
+ gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE? 0:1);
gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE? 0:1);
return 0;
}
static int rk_fb_io_enable(void)
{
+ gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
return 0;
}
#include "board-rk30-sdk-sdmmc.c"
#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
-#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB7 //According to your own project to set the value of write-protect-pin.
+#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB2 //According to your own project to set the value of write-protect-pin.
#endif
#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
-#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PC7 //According to your own project to set the value of write-protect-pin.
+#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PB3 //According to your own project to set the value of write-protect-pin.
#endif
#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK30_PIN6_PB2
+#define RK29SDK_WIFI_SDIO_CARD_INT RK30_PIN3_PD2
#endif //endif ---#ifdef CONFIG_SDMMC_RK29
#else
.use_dma = 0,
#endif
+
+#if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+ .status = rk29sdk_wifi_mmc0_status,
+ .register_status_notify = rk29sdk_wifi_mmc0_status_register,
+#endif
+
.detect_irq = RK30_PIN3_PB6, // INVALID_GPIO
.enable_sd_wakeup = 0,
#endif
#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
-#ifdef CONFIG_WIFI_CONTROL_FUNC
+#if defined(CONFIG_WIFI_CONTROL_FUNC) || defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
.status = rk29sdk_wifi_status,
.register_status_notify = rk29sdk_wifi_status_register,
#endif
.write_prt = INVALID_GPIO,
#endif
+#if defined(CONFIG_RK29_SDIO_IRQ_FROM_GPIO)
+ .sdio_INT_gpio = RK29SDK_WIFI_SDIO_CARD_INT,
+#endif
+
#else
.detect_irq = INVALID_GPIO,
.enable_sd_wakeup = 0,
* the end of setting for SDMMC devices
**************************************************************************************************/
-/* bluetooth rfkill device */
-static struct platform_device rk29sdk_rfkill = {
- .name = "rk29sdk_rfkill",
- .id = -1,
-};
-
#ifdef CONFIG_BATTERY_RK30_ADC
static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
.dc_det_pin = RK30_PIN6_PA5,
#include "board-rk30-sdk-vmac.c"
#endif
+#ifdef CONFIG_RFKILL_RK
+// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
+static struct rfkill_rk_platform_data rfkill_rk_platdata = {
+ .type = RFKILL_TYPE_BLUETOOTH,
+
+ .poweron_gpio = { // BT_REG_ON
+ .io = RK30_PIN3_PC7,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C7_SDMMC1WRITEPRT_NAME,
+ .fgpio = GPIO3C_GPIO3C7,
+ },
+ },
+
+ .reset_gpio = { // BT_RST
+ .io = RK30_PIN3_PD1, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW,
+ .iomux = {
+ .name = GPIO3D1_SDMMC1BACKENDPWR_NAME,
+ .fgpio = GPIO3D_GPIO3D1,
+ },
+ },
+
+ .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup
+ .io = RK30_PIN3_PC6, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C6_SDMMC1DETECTN_NAME,
+ .fgpio = GPIO3C_GPIO3C6,
+ },
+ },
+
+ .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
+ .gpio = {
+ .io = RK30_PIN6_PA7, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising
+ .iomux = {
+ .name = NULL,
+ },
+ },
+ },
+
+ .rts_gpio = { // UART_RTS, enable or disable BT's data coming
+ .io = RK30_PIN1_PA3, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW,
+ .iomux = {
+ .name = GPIO1A3_UART0RTSN_NAME,
+ .fgpio = GPIO1A_GPIO1A3,
+ .fmux = GPIO1A_UART0_RTS_N,
+ },
+ },
+};
+
+static struct platform_device device_rfkill_rk = {
+ .name = "rfkill_rk",
+ .id = -1,
+ .dev = {
+ .platform_data = &rfkill_rk_platdata,
+ },
+};
+#endif
+
static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_BACKLIGHT_RK29_BL
&rk29_device_backlight,
#ifdef CONFIG_RK_IRDA
&irda_device,
#endif
-#ifdef CONFIG_WIFI_CONTROL_FUNC
+#if defined(CONFIG_WIFI_CONTROL_FUNC)||defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
&rk29sdk_wifi_device,
#endif
-#ifdef CONFIG_BT
- &rk29sdk_rfkill,
-#endif
+
+#if defined(CONFIG_MT6620)
+ &mt3326_device_gps,
+#endif
+
#ifdef CONFIG_RK29_SUPPORT_MODEM
&rk30_device_modem,
#endif
+#if defined(CONFIG_MU509)
+ &rk29_device_mu509,
+#endif
+#if defined(CONFIG_MW100)
+ &rk29_device_mw100,
+#endif
+#if defined(CONFIG_MT6229)
+ &rk29_device_mt6229,
+#endif
+#if defined(CONFIG_SEW868)
+ &rk30_device_sew868,
+#endif
#ifdef CONFIG_BATTERY_RK30_ADC
&rk30_device_adc_battery,
#endif
+#ifdef CONFIG_RFKILL_RK
+ &device_rfkill_rk,
+#endif
};
// i2c
.platform_data = &mma8452_info,
},
#endif
+#if defined (CONFIG_GS_LIS3DH)
+ {
+ .type = "gs_lis3dh",
+ .addr = 0x19, //0x19(SA0-->VCC), 0x18(SA0-->GND)
+ .flags = 0,
+ .irq = LIS3DH_INT_PIN,
+ .platform_data = &lis3dh_info,
+ },
+#endif
+#if defined (CONFIG_GS_KXTIK)
+ {
+ .type = "gs_kxtik",
+ .addr = 0x0F,
+ .flags = 0,
+ .irq = KXTIK_INT_PIN,
+ .platform_data = &kxtik_info,
+ },
+#endif
#if defined (CONFIG_COMPASS_AK8975)
{
.type = "ak8975",
.platform_data = &l3g4200d_info,
},
#endif
+#if defined (CONFIG_LS_AL3006)
+ {
+ .type = "light_al3006",
+ .addr = 0x1c, //sel = 0; if sel =1, then addr = 0x1D
+ .flags = 0,
+ .irq = RK30_PIN6_PA2,
+ .platform_data = &light_al3006_info,
+ },
+#endif
+#if defined (CONFIG_LS_STK3171)
+ {
+ .type = "ls_stk3171",
+ .addr = 0x48,
+ .flags = 0,
+ .irq = RK30_PIN6_PA2,
+ .platform_data = &light_stk3171_info,
+ },
+#endif
+
+
+#if defined (CONFIG_PS_AL3006)
+ {
+ .type = "proximity_al3006",
+ .addr = 0x1c, //sel = 0; if sel =1, then addr = 0x1D
+ .flags = 0,
+ .irq = RK30_PIN6_PA2,
+ .platform_data = &proximity_al3006_info,
+ },
+#endif
+
+#if defined (CONFIG_PS_STK3171)
+ {
+ .type = "ps_stk3171",
+ .addr = 0x48,
+ .flags = 0,
+ .irq = RK30_PIN6_PA2,
+ .platform_data = &proximity_stk3171_info,
+ },
+#endif
#if defined (CONFIG_SND_SOC_RK1000)
{
.type = "rk1000_i2c_codec",
};
#endif
-
+#define PMIC_TYPE_WM8326 1
+#define PMIC_TYPE_TPS65910 2
+int __sramdata g_pmic_type = 0;
#ifdef CONFIG_I2C1_RK30
+#ifdef CONFIG_MFD_WM831X_I2C
#include "board-rk30-sdk-wm8326.c"
+#endif
+#ifdef CONFIG_MFD_TPS65910
+#define TPS65910_HOST_IRQ RK30_PIN6_PA4
+#include "board-rk30-sdk-tps65910.c"
+#endif
static struct i2c_board_info __initdata i2c1_info[] = {
#if defined (CONFIG_MFD_WM831X_I2C)
.platform_data = &wm831x_platdata,
},
#endif
+#if defined (CONFIG_MFD_TPS65910)
+ {
+ .type = "tps65910",
+ .addr = TPS65910_I2C_ID0,
+ .flags = 0,
+ .irq = TPS65910_HOST_IRQ,
+ .platform_data = &tps65910_data,
+ },
+#endif
};
#endif
+void __sramfunc board_pmu_suspend(void)
+{
+ #if defined (CONFIG_MFD_WM831X_I2C)
+ if(g_pmic_type == PMIC_TYPE_WM8326)
+ board_pmu_wm8326_suspend();
+ #endif
+ #if defined (CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ board_pmu_tps65910_suspend();
+ #endif
+}
+
+void __sramfunc board_pmu_resume(void)
+{
+ #if defined (CONFIG_MFD_WM831X_I2C)
+ if(g_pmic_type == PMIC_TYPE_WM8326)
+ board_pmu_wm8326_resume();
+ #endif
+ #if defined (CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ board_pmu_tps65910_resume();
+ #endif
+}
+
#ifdef CONFIG_I2C2_RK30
static struct i2c_board_info __initdata i2c2_info[] = {
#if defined (CONFIG_TOUCHSCREEN_GT8XX)
#endif
#if defined (CONFIG_LS_CM3217)
{
- .type = "lightsensor",
+ .type = "light_cm3217",
.addr = 0x10,
.flags = 0,
- .irq = CM3217_IRQ_PIN,
.platform_data = &cm3217_info,
},
#endif
{
printk(KERN_ERR "rk30_pm_power_off start...\n");
gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
-#if defined(CONFIG_MFD_WM831X)
- wm831x_set_bits(Wm831x,WM831X_GPIO_LEVEL,0x0001,0x0000); //set sys_pwr 0
- wm831x_device_shutdown(Wm831x);//wm8326 shutdown
-#endif
+ #if defined(CONFIG_MFD_WM831X)
+ if(g_pmic_type == PMIC_TYPE_WM8326)
+ {
+ wm831x_set_bits(Wm831x,WM831X_GPIO_LEVEL,0x0001,0x0000); //set sys_pwr 0
+ wm831x_device_shutdown(Wm831x);//wm8326 shutdown
+ }
+ #endif
+ #if defined(CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ {
+ tps65910_device_shutdown();//tps65910 shutdown
+ }
+ #endif
+
while (1);
}
static void __init machine_rk30_board_init(void)
{
+ avs_init();
gpio_request(POWER_ON_PIN, "poweronpin");
gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
#ifdef CONFIG_WIFI_CONTROL_FUNC
rk29sdk_wifi_bt_gpio_control_init();
#endif
+
+#if defined(CONFIG_MT6620)
+ clk_set_rate(clk_get_sys("rk_serial.0", "uart"), 16*1000000);
+#endif
}
static void __init rk30_reserve(void)
* comments : min arm/logic voltage
*/
static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
- {.frequency = 252 * 1000, .cpu_volt = 1050 * 1000, .logic_volt = 1050 * 1000},//0.975V/1.000V
- {.frequency = 504 * 1000, .cpu_volt = 1050 * 1000, .logic_volt = 1050 * 1000},//0.975V/1.000V
- {.frequency = 816 * 1000, .cpu_volt = 1050 * 1000, .logic_volt = 1050 * 1000},//1.000V/1.025V
- {.frequency = 1008 * 1000, .cpu_volt = 1050 * 1000, .logic_volt = 1050 * 1000},//1.025V/1.050V
- {.frequency = 1200 * 1000, .cpu_volt = 1150 * 1000, .logic_volt = 1100 * 1000},//1.100V/1.050V
- {.frequency = 1272 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1150 * 1000},//1.150V/1.100V
- {.frequency = 1416 * 1000, .cpu_volt = 1275 * 1000, .logic_volt = 1150 * 1000},//1.225V/1.100V
- {.frequency = 1512 * 1000, .cpu_volt = 1325 * 1000, .logic_volt = 1200 * 1000},//1.300V/1.150V
- {.frequency = 1608 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1200 * 1000},//1.325V/1.175V
+ {.frequency = 252 * 1000, .cpu_volt = 1075 * 1000, .logic_volt = 1125 * 1000},//0.975V/1.000V
+ {.frequency = 504 * 1000, .cpu_volt = 1100 * 1000, .logic_volt = 1125 * 1000},//0.975V/1.000V
+ {.frequency = 816 * 1000, .cpu_volt = 1125 * 1000, .logic_volt = 1150 * 1000},//1.000V/1.025V
+ {.frequency = 1008 * 1000, .cpu_volt = 1125 * 1000, .logic_volt = 1150 * 1000},//1.025V/1.050V
+ {.frequency = 1200 * 1000, .cpu_volt = 1175 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
+ {.frequency = 1272 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},//1.150V/1.100V
+ {.frequency = 1416 * 1000, .cpu_volt = 1300 * 1000, .logic_volt = 1200 * 1000},//1.225V/1.100V
+ {.frequency = 1512 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1250 * 1000},//1.300V/1.150V
+ {.frequency = 1608 * 1000, .cpu_volt = 1425 * 1000, .logic_volt = 1300 * 1000},//1.325V/1.175V
{.frequency = CPUFREQ_TABLE_END},
};
+
static struct cpufreq_frequency_table dvfs_gpu_table[] = {
- {.frequency = 266 * 1000, .index = 1000 * 1000},
- {.frequency = 400 * 1000, .index = 1350 * 1000},
+ {.frequency = 266 * 1000, .index = 1050 * 1000},
+ {.frequency = 400 * 1000, .index = 1275 * 1000},
{.frequency = CPUFREQ_TABLE_END},
};
static struct cpufreq_frequency_table dvfs_ddr_table[] = {
- {.frequency = 300 * 1000, .index = 1000 * 1000},
- {.frequency = 400 * 1000, .index = 1100 * 1000},
+ {.frequency = 300 * 1000, .index = 1050 * 1000},
+ {.frequency = 400 * 1000, .index = 1125 * 1000},
{.frequency = CPUFREQ_TABLE_END},
};
projects / firefly-linux-kernel-4.4.55.git / blobdiff