Merge branch 'depends/tty-omap-serial' into next/cleanup

[firefly-linux-kernel-4.4.55.git] / arch / arm / mach-ux500 / board-mop500.c

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8674a890fd1c7071ae2efce55a3a7c888a97c091..1d2e3c6f8b5911a0cc2d6c59602559bca823c75f 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-       void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-       prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-                       PRCC_K_SOFTRST_SET);
-       prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-                       PRCC_K_SOFTRST_CLEAR);
-
-       /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-       writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-       udelay(1);
-
-       /* Release soft reset PRCC_K_SOFTRST_SET */
-       writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-       udelay(1);
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
        .dma_filter = stedma40_filter,
        .dma_rx_param = &uart0_dma_cfg_rx,
        .dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-       .reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {
@@ -797,6 +776,7 @@ static void __init u8500_init_machine(void)
                                ARRAY_SIZE(mop500_platform_devs));
 
                mop500_sdi_init(parent);
+               mop500_msp_init(parent);
                i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
                i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
                i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +784,8 @@ static void __init u8500_init_machine(void)
 
                mop500_uib_init();
 
+       } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+               mop500_msp_init(parent);
        } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
                /*
                 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +797,7 @@ static void __init u8500_init_machine(void)
                                ARRAY_SIZE(mop500_platform_devs));
 
                hrefv60_sdi_init(parent);
+               mop500_msp_init(parent);
 
                i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
                i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;