* This file handles the architecture-dependent parts of initialization
*/
+#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/mmzone.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/edd.h>
#include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+
#include <video/edid.h>
+
+#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
#include "setup_arch_pre.h"
#include <bios_ebda.h>
+/* Forward Declaration. */
+void __init find_max_pfn(void);
+
/* This value is set up by the early boot code to point to the value
immediately after the boot time page tables. It contains a *physical*
address, and must not be in the .bss segment! */
unsigned long init_pg_tables_end __initdata = ~0UL;
-int disable_pse __initdata = 0;
+int disable_pse __devinitdata = 0;
/*
* Machine setup..
struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
/* common cpu data for all cpus */
struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+EXPORT_SYMBOL(boot_cpu_data);
unsigned long mmu_cr4_features;
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
+#ifdef CONFIG_MCA
+EXPORT_SYMBOL(machine_id);
+#endif
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
unsigned int mca_pentium_flag;
/* For PCI or other memory-mapped resources */
unsigned long pci_mem_start = 0x10000000;
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
/* Boot loader ID as an integer, for the benefit of proc_dointvec */
int bootloader_type;
* Setup options
*/
struct drive_info_struct { char dummy[32]; } drive_info;
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || \
+ defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
+EXPORT_SYMBOL(drive_info);
+#endif
struct screen_info screen_info;
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(screen_info);
+#endif
struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
struct sys_desc_table_struct {
unsigned short length;
unsigned char table[0];
};
struct edid_info edid_info;
struct ist_info ist_info;
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+EXPORT_SYMBOL(ist_info);
+#endif
struct e820map e820;
extern void early_cpu_init(void);
if (to != command_line)
to--;
if (!memcmp(from+7, "exactmap", 8)) {
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we
+ * still need to know the real mem
+ * size before original memory map is
+ * reset.
+ */
+ find_max_pfn();
+ saved_max_pfn = max_pfn;
+#endif
from += 8+7;
e820.nr_map = 0;
userdef = 1;
#endif /* CONFIG_X86_LOCAL_APIC */
#endif /* CONFIG_ACPI_BOOT */
+#ifdef CONFIG_X86_LOCAL_APIC
+ /* enable local APIC */
+ else if (!memcmp(from, "lapic", 5))
+ lapic_enable();
+
+ /* disable local APIC */
+ else if (!memcmp(from, "nolapic", 6))
+ lapic_disable();
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_KEXEC
+ /* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never set's it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+ else if (!memcmp(from, "crashkernel=", 12)) {
+ unsigned long size, base;
+ size = memparse(from+12, &from);
+ if (*from == '@') {
+ base = memparse(from+1, &from);
+ /* FIXME: Do I want a sanity check
+ * to validate the memory range?
+ */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ }
+#endif
+#ifdef CONFIG_CRASH_DUMP
+ /* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+ else if (!memcmp(from, "elfcorehdr=", 11))
+ elfcorehdr_addr = memparse(from+11, &from);
+#endif
+
/*
* highmem=size forces highmem to be exactly 'size' bytes.
* This works even on boxes that have no highmem otherwise.
reserve_bootmem(addr, PAGE_SIZE);
}
-#ifndef CONFIG_DISCONTIGMEM
+#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init setup_bootmem_allocator(void);
static unsigned long __init setup_memory(void)
{
free_area_init(zones_size);
}
#else
-extern unsigned long setup_memory(void);
+extern unsigned long __init setup_memory(void);
extern void zone_sizes_init(void);
-#endif /* !CONFIG_DISCONTIGMEM */
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
void __init setup_bootmem_allocator(void)
{
* the (very unlikely) case of us accidentally initializing the
* bootmem allocator with an invalid RAM area.
*/
- reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
- bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+ reserve_bootmem(__PHYSICAL_START, (PFN_PHYS(min_low_pfn) +
+ bootmap_size + PAGE_SIZE-1) - (__PHYSICAL_START));
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
}
}
#endif
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1);
+#endif
}
/*
*/
request_resource(res, code_resource);
request_resource(res, data_resource);
+#ifdef CONFIG_KEXEC
+ request_resource(res, &crashk_res);
+#endif
}
}
}
#endif
paging_init();
remapped_pgdat_init();
+ sparse_init();
zone_sizes_init();
/*