select HAVE_ARCH_KGDB
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
- select RTC_LIB
+ select RTC_LIB if !LEMOTE_FULOONG2E
mainmenu "Linux/MIPS Kernel Configuration"
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config AR7
+ bool "Texas Instruments AR7"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select NO_EXCEPT_FILL
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_GPIO
+ select GCD
+ select VLYNQ
+ help
+ Support for the Texas Instruments AR7 System-on-a-Chip
+ family: TNETD7100, 7200 and 7300.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
help
Support for BCM47XX based boards
+config BCM63XX
+ bool "Broadcom BCM63XX based boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select SWAP_IO_SPACE
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for BCM63XX based boards
+
config MIPS_COBALT
bool "Cobalt Server"
select CEVT_R4K
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
-config LEMOTE_FULONG
- bool "Lemote Fulong mini-PC"
- select ARCH_SPARSEMEM_ENABLE
- select CEVT_R4K
- select CSRC_R4K
- select SYS_HAS_CPU_LOONGSON2
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select BOARD_SCACHE
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select I8259
- select ISA
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select CPU_HAS_WB
+config MACH_LOONGSON
+ bool "Loongson family of machines"
help
- Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
- an FPGA northbridge
+ This enables the support of Loongson family of machines.
+
+ Loongson is a family of general-purpose MIPS-compatible CPUs.
+ developed at Institute of Computing Technology (ICT),
+ Chinese Academy of Sciences (CAS) in the People's Republic
+ of China. The chief architect is Professor Weiwu Hu.
config MIPS_MALTA
bool "MIPS Malta board"
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken
+ select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
help
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
+ select ARCH_REQUIRE_GPIOLIB
config NXP_STB220
bool "NXP STB220 board"
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_CPU_CAVIUM_OCTEON
help
The Octeon simulator is software performance model of the Cavium
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
+ select HW_HAS_PCI
+ select ARCH_SUPPORTS_MSI
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
+source "arch/mips/loongson/Kconfig"
endmenu
bool
config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
+ help
+ Say Y here to allow turning CPUs off and on. CPUs can be
+ controlled through /sys/devices/system/cpu.
+ (Note: power management support will enable this option
+ automatically on SMP systems. )
+ Say N if you want to disable CPU hotplug.
+
+config SYS_SUPPORTS_HOTPLUG_CPU
bool
- default n
config I8259
bool
config SYS_SUPPORTS_LITTLE_ENDIAN
bool
+config SYS_SUPPORTS_HUGETLBFS
+ bool
+ depends on CPU_SUPPORTS_HUGEPAGES && 64BIT
+ default y
+
config IRQ_CPU
bool
prompt "CPU type"
default CPU_R4X00
-config CPU_LOONGSON2
- bool "Loongson 2"
- depends on SYS_HAS_CPU_LOONGSON2
- select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_SUPPORTS_64BIT_KERNEL
- select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON2E
+ bool "Loongson 2E"
+ depends on SYS_HAS_CPU_LOONGSON2E
+ select CPU_LOONGSON2
help
The Loongson 2E processor implements the MIPS III instruction set
with many extensions.
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
config CPU_MIPS32_R2
bool "MIPS32 Release 2"
depends on SYS_HAS_CPU_MIPS32_R2
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
config CPU_MIPS64_R1
bool "MIPS64 Release 1"
depends on SYS_HAS_CPU_MIPS64_R1
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_HUGEPAGES
help
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
config CPU_MIPS64_R2
bool "MIPS64 Release 2"
depends on SYS_HAS_CPU_MIPS64_R2
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_HUGEPAGES
help
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
config CPU_R4300
bool "R4300"
depends on SYS_HAS_CPU_R4300
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
config CPU_R4X00
bool "R4x00"
depends on SYS_HAS_CPU_R4X00
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
config CPU_TX49XX
bool "R49XX"
depends on SYS_HAS_CPU_TX49XX
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_R5000
bool "R5000"
depends on SYS_HAS_CPU_R5000
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
config CPU_R5432
bool "R5432"
depends on SYS_HAS_CPU_R5432
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_R5500
bool "R5500"
depends on SYS_HAS_CPU_R5500
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HUGEPAGES
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
config CPU_R6000
bool "R6000"
depends on EXPERIMENTAL
- select CPU_HAS_LLSC
depends on SYS_HAS_CPU_R6000
select CPU_SUPPORTS_32BIT_KERNEL
help
config CPU_NEVADA
bool "RM52xx"
depends on SYS_HAS_CPU_NEVADA
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
bool "R8000"
depends on EXPERIMENTAL
depends on SYS_HAS_CPU_R8000
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
help
config CPU_R10000
bool "R10000"
depends on SYS_HAS_CPU_R10000
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_RM7000
bool "RM7000"
depends on SYS_HAS_CPU_RM7000
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_RM9000
bool "RM9000"
depends on SYS_HAS_CPU_RM9000
- select CPU_HAS_LLSC
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_SB1
bool "SB1"
depends on SYS_HAS_CPU_SB1
- select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_HUGEPAGES
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
endchoice
-config SYS_HAS_CPU_LOONGSON2
+config CPU_LOONGSON2
+ bool
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+config SYS_HAS_CPU_LOONGSON2E
bool
config SYS_HAS_CPU_MIPS32_R1
bool
config CPU_SUPPORTS_64BIT_KERNEL
bool
+config CPU_SUPPORTS_HUGEPAGES
+ bool
#
# Set to y for ptrace access to watch registers.
config MIPS_CMP
bool "MIPS CMP framework support"
depends on SYS_SUPPORTS_MIPS_CMP
- select SYNC_R4K if BROKEN
+ select SYNC_R4K
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_SCHED_SMT if SMP
select WEAK_ORDERING
config 64BIT_PHYS_ADDR
bool
-config CPU_HAS_LLSC
- bool
-
config CPU_HAS_SMARTMIPS
depends on SYS_SUPPORTS_SMARTMIPS
bool "Support for the SmartMIPS ASE"
menu "Power management options"
+config ARCH_HIBERNATION_POSSIBLE
+ def_bool y
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
+
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on !SMP
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
source "kernel/power/Kconfig"
projects / firefly-linux-kernel-4.4.55.git / blobdiff