MIPS: PCMCIA: new socket driver for Au1000 demoboards.
[firefly-linux-kernel-4.4.55.git] / arch / mips / include / asm / mach-pb1x00 / pb1100.h
index b1a60f1cbd021446bf6c91625e2f0e17f7e8b474..f2bf73a11fb2312a6cef38921affaf8eaa005dbc 100644 (file)
 #ifndef __ASM_PB1100_H
 #define __ASM_PB1100_H
 
-#define PB1100_IDENT           0xAE000000
-#define BOARD_STATUS_REG       0xAE000004
-#  define PB1100_ROM_SEL       (1 << 15)
-#  define PB1100_ROM_SIZ       (1 << 14)
-#  define PB1100_SWAP_BOOT     (1 << 13)
-#  define PB1100_FLASH_WP      (1 << 12)
-#  define PB1100_ROM_H_STS     (1 << 11)
-#  define PB1100_ROM_L_STS     (1 << 10)
-#  define PB1100_FLASH_H_STS   (1 << 9)
-#  define PB1100_FLASH_L_STS   (1 << 8)
-#  define PB1100_SRAM_SIZ      (1 << 7)
-#  define PB1100_TSC_BUSY      (1 << 6)
-#  define PB1100_PCMCIA_VS_MASK (3 << 4)
-#  define PB1100_RS232_CD      (1 << 3)
-#  define PB1100_RS232_CTS     (1 << 2)
-#  define PB1100_RS232_DSR     (1 << 1)
-#  define PB1100_RS232_RI      (1 << 0)
-
-#define PB1100_IRDA_RS232      0xAE00000C
-#  define PB1100_IRDA_FULL     (0 << 14)       /* full power           */
-#  define PB1100_IRDA_SHUTDOWN (1 << 14)
-#  define PB1100_IRDA_TT       (2 << 14)       /* 2/3 power            */
-#  define PB1100_IRDA_OT       (3 << 14)       /* 1/3 power            */
-#  define PB1100_IRDA_FIR      (1 << 13)
-
-#define PCMCIA_BOARD_REG       0xAE000010
-#  define PB1100_SD_WP1_RO     (1 << 15)       /* read only            */
-#  define PB1100_SD_WP0_RO     (1 << 14)       /* read only            */
-#  define PB1100_SD_PWR1       (1 << 11)       /* applies power to SD1 */
-#  define PB1100_SD_PWR0       (1 << 10)       /* applies power to SD0 */
-#  define PB1100_SEL_SD_CONN1  (1 << 9)
-#  define PB1100_SEL_SD_CONN0  (1 << 8)
-#  define PC_DEASSERT_RST      (1 << 7)
-#  define PC_DRV_EN            (1 << 4)
-
-#define PB1100_G_CONTROL       0xAE000014      /* graphics control     */
-
-#define PB1100_RST_VDDI        0xAE00001C
-#  define PB1100_SOFT_RESET    (1 << 15)       /* clear to reset the board */
-#  define PB1100_VDDI_MASK     0x1F
-
-#define PB1100_LEDS            0xAE000018
-
-/*
- * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0  is the LED Display's decimal points.
- */
-#define PB1100_HEX_LED         0xAE000018
-
 /* PCMCIA Pb1100 specific defines */
 #define PCMCIA_MAX_SOCK  0
 #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)