#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/ktime.h>
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
return er;
}
-/* Everytime the compare register is written to, we need to decide when to fire
- * the timer that represents timer ticks to the GUEST.
+/**
+ * kvm_mips_count_disabled() - Find whether the CP0_Count timer is disabled.
+ * @vcpu: Virtual CPU.
*
+ * Returns: 1 if the CP0_Count timer is disabled by either the guest
+ * CP0_Cause.DC bit or the count_ctl.DC bit.
+ * 0 otherwise (in which case CP0_Count timer is running).
*/
-enum emulation_result kvm_mips_emulate_count(struct kvm_vcpu *vcpu)
+static inline int kvm_mips_count_disabled(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
- enum emulation_result er = EMULATE_DONE;
+ return (vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) ||
+ (kvm_read_c0_guest_cause(cop0) & CAUSEF_DC);
+}
+
+/**
+ * kvm_mips_ktime_to_count() - Scale ktime_t to a 32-bit count.
+ *
+ * Caches the dynamic nanosecond bias in vcpu->arch.count_dyn_bias.
+ *
+ * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
+ */
+static uint32_t kvm_mips_ktime_to_count(struct kvm_vcpu *vcpu, ktime_t now)
+{
+ s64 now_ns, periods;
+ u64 delta;
+
+ now_ns = ktime_to_ns(now);
+ delta = now_ns + vcpu->arch.count_dyn_bias;
+
+ if (delta >= vcpu->arch.count_period) {
+ /* If delta is out of safe range the bias needs adjusting */
+ periods = div64_s64(now_ns, vcpu->arch.count_period);
+ vcpu->arch.count_dyn_bias = -periods * vcpu->arch.count_period;
+ /* Recalculate delta with new bias */
+ delta = now_ns + vcpu->arch.count_dyn_bias;
+ }
+
+ /*
+ * We've ensured that:
+ * delta < count_period
+ *
+ * Therefore the intermediate delta*count_hz will never overflow since
+ * at the boundary condition:
+ * delta = count_period
+ * delta = NSEC_PER_SEC * 2^32 / count_hz
+ * delta * count_hz = NSEC_PER_SEC * 2^32
+ */
+ return div_u64(delta * vcpu->arch.count_hz, NSEC_PER_SEC);
+}
+
+/**
+ * kvm_mips_count_time() - Get effective current time.
+ * @vcpu: Virtual CPU.
+ *
+ * Get effective monotonic ktime. This is usually a straightforward ktime_get(),
+ * except when the master disable bit is set in count_ctl, in which case it is
+ * count_resume, i.e. the time that the count was disabled.
+ *
+ * Returns: Effective monotonic ktime for CP0_Count.
+ */
+static inline ktime_t kvm_mips_count_time(struct kvm_vcpu *vcpu)
+{
+ if (unlikely(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC))
+ return vcpu->arch.count_resume;
+
+ return ktime_get();
+}
+
+/**
+ * kvm_mips_read_count_running() - Read the current count value as if running.
+ * @vcpu: Virtual CPU.
+ * @now: Kernel time to read CP0_Count at.
+ *
+ * Returns the current guest CP0_Count register at time @now and handles if the
+ * timer interrupt is pending and hasn't been handled yet.
+ *
+ * Returns: The current value of the guest CP0_Count register.
+ */
+static uint32_t kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now)
+{
+ ktime_t expires;
+ int running;
+
+ /* Is the hrtimer pending? */
+ expires = hrtimer_get_expires(&vcpu->arch.comparecount_timer);
+ if (ktime_compare(now, expires) >= 0) {
+ /*
+ * Cancel it while we handle it so there's no chance of
+ * interference with the timeout handler.
+ */
+ running = hrtimer_cancel(&vcpu->arch.comparecount_timer);
+
+ /* Nothing should be waiting on the timeout */
+ kvm_mips_callbacks->queue_timer_int(vcpu);
+
+ /*
+ * Restart the timer if it was running based on the expiry time
+ * we read, so that we don't push it back 2 periods.
+ */
+ if (running) {
+ expires = ktime_add_ns(expires,
+ vcpu->arch.count_period);
+ hrtimer_start(&vcpu->arch.comparecount_timer, expires,
+ HRTIMER_MODE_ABS);
+ }
+ }
+
+ /* Return the biased and scaled guest CP0_Count */
+ return vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now);
+}
+
+/**
+ * kvm_mips_read_count() - Read the current count value.
+ * @vcpu: Virtual CPU.
+ *
+ * Read the current guest CP0_Count value, taking into account whether the timer
+ * is stopped.
+ *
+ * Returns: The current guest CP0_Count value.
+ */
+uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+
+ /* If count disabled just read static copy of count */
+ if (kvm_mips_count_disabled(vcpu))
+ return kvm_read_c0_guest_count(cop0);
+
+ return kvm_mips_read_count_running(vcpu, ktime_get());
+}
+
+/**
+ * kvm_mips_freeze_hrtimer() - Safely stop the hrtimer.
+ * @vcpu: Virtual CPU.
+ * @count: Output pointer for CP0_Count value at point of freeze.
+ *
+ * Freeze the hrtimer safely and return both the ktime and the CP0_Count value
+ * at the point it was frozen. It is guaranteed that any pending interrupts at
+ * the point it was frozen are handled, and none after that point.
+ *
+ * This is useful where the time/CP0_Count is needed in the calculation of the
+ * new parameters.
+ *
+ * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
+ *
+ * Returns: The ktime at the point of freeze.
+ */
+static ktime_t kvm_mips_freeze_hrtimer(struct kvm_vcpu *vcpu,
+ uint32_t *count)
+{
+ ktime_t now;
+
+ /* stop hrtimer before finding time */
+ hrtimer_cancel(&vcpu->arch.comparecount_timer);
+ now = ktime_get();
+
+ /* find count at this point and handle pending hrtimer */
+ *count = kvm_mips_read_count_running(vcpu, now);
+
+ return now;
+}
+
- /* If COUNT is enabled */
- if (!(kvm_read_c0_guest_cause(cop0) & CAUSEF_DC)) {
- hrtimer_try_to_cancel(&vcpu->arch.comparecount_timer);
- hrtimer_start(&vcpu->arch.comparecount_timer,
- ktime_set(0, MS_TO_NS(10)), HRTIMER_MODE_REL);
+/**
+ * kvm_mips_resume_hrtimer() - Resume hrtimer, updating expiry.
+ * @vcpu: Virtual CPU.
+ * @now: ktime at point of resume.
+ * @count: CP0_Count at point of resume.
+ *
+ * Resumes the timer and updates the timer expiry based on @now and @count.
+ * This can be used in conjunction with kvm_mips_freeze_timer() when timer
+ * parameters need to be changed.
+ *
+ * It is guaranteed that a timer interrupt immediately after resume will be
+ * handled, but not if CP_Compare is exactly at @count. That case is already
+ * handled by kvm_mips_freeze_timer().
+ *
+ * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
+ */
+static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
+ ktime_t now, uint32_t count)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ uint32_t compare;
+ u64 delta;
+ ktime_t expire;
+
+ /* Calculate timeout (wrap 0 to 2^32) */
+ compare = kvm_read_c0_guest_compare(cop0);
+ delta = (u64)(uint32_t)(compare - count - 1) + 1;
+ delta = div_u64(delta * NSEC_PER_SEC, vcpu->arch.count_hz);
+ expire = ktime_add_ns(now, delta);
+
+ /* Update hrtimer to use new timeout */
+ hrtimer_cancel(&vcpu->arch.comparecount_timer);
+ hrtimer_start(&vcpu->arch.comparecount_timer, expire, HRTIMER_MODE_ABS);
+}
+
+/**
+ * kvm_mips_update_hrtimer() - Update next expiry time of hrtimer.
+ * @vcpu: Virtual CPU.
+ *
+ * Recalculates and updates the expiry time of the hrtimer. This can be used
+ * after timer parameters have been altered which do not depend on the time that
+ * the change occurs (in those cases kvm_mips_freeze_hrtimer() and
+ * kvm_mips_resume_hrtimer() are used directly).
+ *
+ * It is guaranteed that no timer interrupts will be lost in the process.
+ *
+ * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
+ */
+static void kvm_mips_update_hrtimer(struct kvm_vcpu *vcpu)
+{
+ ktime_t now;
+ uint32_t count;
+
+ /*
+ * freeze_hrtimer takes care of a timer interrupts <= count, and
+ * resume_hrtimer the hrtimer takes care of a timer interrupts > count.
+ */
+ now = kvm_mips_freeze_hrtimer(vcpu, &count);
+ kvm_mips_resume_hrtimer(vcpu, now, count);
+}
+
+/**
+ * kvm_mips_write_count() - Modify the count and update timer.
+ * @vcpu: Virtual CPU.
+ * @count: Guest CP0_Count value to set.
+ *
+ * Sets the CP0_Count value and updates the timer accordingly.
+ */
+void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ ktime_t now;
+
+ /* Calculate bias */
+ now = kvm_mips_count_time(vcpu);
+ vcpu->arch.count_bias = count - kvm_mips_ktime_to_count(vcpu, now);
+
+ if (kvm_mips_count_disabled(vcpu))
+ /* The timer's disabled, adjust the static count */
+ kvm_write_c0_guest_count(cop0, count);
+ else
+ /* Update timeout */
+ kvm_mips_resume_hrtimer(vcpu, now, count);
+}
+
+/**
+ * kvm_mips_init_count() - Initialise timer.
+ * @vcpu: Virtual CPU.
+ *
+ * Initialise the timer to a sensible frequency, namely 100MHz, zero it, and set
+ * it going if it's enabled.
+ */
+void kvm_mips_init_count(struct kvm_vcpu *vcpu)
+{
+ /* 100 MHz */
+ vcpu->arch.count_hz = 100*1000*1000;
+ vcpu->arch.count_period = div_u64((u64)NSEC_PER_SEC << 32,
+ vcpu->arch.count_hz);
+ vcpu->arch.count_dyn_bias = 0;
+
+ /* Starting at 0 */
+ kvm_mips_write_count(vcpu, 0);
+}
+
+/**
+ * kvm_mips_set_count_hz() - Update the frequency of the timer.
+ * @vcpu: Virtual CPU.
+ * @count_hz: Frequency of CP0_Count timer in Hz.
+ *
+ * Change the frequency of the CP0_Count timer. This is done atomically so that
+ * CP0_Count is continuous and no timer interrupt is lost.
+ *
+ * Returns: -EINVAL if @count_hz is out of range.
+ * 0 on success.
+ */
+int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ int dc;
+ ktime_t now;
+ u32 count;
+
+ /* ensure the frequency is in a sensible range... */
+ if (count_hz <= 0 || count_hz > NSEC_PER_SEC)
+ return -EINVAL;
+ /* ... and has actually changed */
+ if (vcpu->arch.count_hz == count_hz)
+ return 0;
+
+ /* Safely freeze timer so we can keep it continuous */
+ dc = kvm_mips_count_disabled(vcpu);
+ if (dc) {
+ now = kvm_mips_count_time(vcpu);
+ count = kvm_read_c0_guest_count(cop0);
} else {
- hrtimer_try_to_cancel(&vcpu->arch.comparecount_timer);
+ now = kvm_mips_freeze_hrtimer(vcpu, &count);
}
- return er;
+ /* Update the frequency */
+ vcpu->arch.count_hz = count_hz;
+ vcpu->arch.count_period = div_u64((u64)NSEC_PER_SEC << 32, count_hz);
+ vcpu->arch.count_dyn_bias = 0;
+
+ /* Calculate adjusted bias so dynamic count is unchanged */
+ vcpu->arch.count_bias = count - kvm_mips_ktime_to_count(vcpu, now);
+
+ /* Update and resume hrtimer */
+ if (!dc)
+ kvm_mips_resume_hrtimer(vcpu, now, count);
+ return 0;
+}
+
+/**
+ * kvm_mips_write_compare() - Modify compare and update timer.
+ * @vcpu: Virtual CPU.
+ * @compare: New CP0_Compare value.
+ *
+ * Update CP0_Compare to a new value and update the timeout.
+ */
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+
+ /* if unchanged, must just be an ack */
+ if (kvm_read_c0_guest_compare(cop0) == compare)
+ return;
+
+ /* Update compare */
+ kvm_write_c0_guest_compare(cop0, compare);
+
+ /* Update timeout if count enabled */
+ if (!kvm_mips_count_disabled(vcpu))
+ kvm_mips_update_hrtimer(vcpu);
+}
+
+/**
+ * kvm_mips_count_disable() - Disable count.
+ * @vcpu: Virtual CPU.
+ *
+ * Disable the CP0_Count timer. A timer interrupt on or before the final stop
+ * time will be handled but not after.
+ *
+ * Assumes CP0_Count was previously enabled but now Guest.CP0_Cause.DC or
+ * count_ctl.DC has been set (count disabled).
+ *
+ * Returns: The time that the timer was stopped.
+ */
+static ktime_t kvm_mips_count_disable(struct kvm_vcpu *vcpu)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ uint32_t count;
+ ktime_t now;
+
+ /* Stop hrtimer */
+ hrtimer_cancel(&vcpu->arch.comparecount_timer);
+
+ /* Set the static count from the dynamic count, handling pending TI */
+ now = ktime_get();
+ count = kvm_mips_read_count_running(vcpu, now);
+ kvm_write_c0_guest_count(cop0, count);
+
+ return now;
+}
+
+/**
+ * kvm_mips_count_disable_cause() - Disable count using CP0_Cause.DC.
+ * @vcpu: Virtual CPU.
+ *
+ * Disable the CP0_Count timer and set CP0_Cause.DC. A timer interrupt on or
+ * before the final stop time will be handled if the timer isn't disabled by
+ * count_ctl.DC, but not after.
+ *
+ * Assumes CP0_Cause.DC is clear (count enabled).
+ */
+void kvm_mips_count_disable_cause(struct kvm_vcpu *vcpu)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+
+ kvm_set_c0_guest_cause(cop0, CAUSEF_DC);
+ if (!(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC))
+ kvm_mips_count_disable(vcpu);
+}
+
+/**
+ * kvm_mips_count_enable_cause() - Enable count using CP0_Cause.DC.
+ * @vcpu: Virtual CPU.
+ *
+ * Enable the CP0_Count timer and clear CP0_Cause.DC. A timer interrupt after
+ * the start time will be handled if the timer isn't disabled by count_ctl.DC,
+ * potentially before even returning, so the caller should be careful with
+ * ordering of CP0_Cause modifications so as not to lose it.
+ *
+ * Assumes CP0_Cause.DC is set (count disabled).
+ */
+void kvm_mips_count_enable_cause(struct kvm_vcpu *vcpu)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ uint32_t count;
+
+ kvm_clear_c0_guest_cause(cop0, CAUSEF_DC);
+
+ /*
+ * Set the dynamic count to match the static count.
+ * This starts the hrtimer if count_ctl.DC allows it.
+ * Otherwise it conveniently updates the biases.
+ */
+ count = kvm_read_c0_guest_count(cop0);
+ kvm_mips_write_count(vcpu, count);
+}
+
+/**
+ * kvm_mips_set_count_ctl() - Update the count control KVM register.
+ * @vcpu: Virtual CPU.
+ * @count_ctl: Count control register new value.
+ *
+ * Set the count control KVM register. The timer is updated accordingly.
+ *
+ * Returns: -EINVAL if reserved bits are set.
+ * 0 on success.
+ */
+int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl)
+{
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ s64 changed = count_ctl ^ vcpu->arch.count_ctl;
+ s64 delta;
+ ktime_t expire, now;
+ uint32_t count, compare;
+
+ /* Only allow defined bits to be changed */
+ if (changed & ~(s64)(KVM_REG_MIPS_COUNT_CTL_DC))
+ return -EINVAL;
+
+ /* Apply new value */
+ vcpu->arch.count_ctl = count_ctl;
+
+ /* Master CP0_Count disable */
+ if (changed & KVM_REG_MIPS_COUNT_CTL_DC) {
+ /* Is CP0_Cause.DC already disabling CP0_Count? */
+ if (kvm_read_c0_guest_cause(cop0) & CAUSEF_DC) {
+ if (count_ctl & KVM_REG_MIPS_COUNT_CTL_DC)
+ /* Just record the current time */
+ vcpu->arch.count_resume = ktime_get();
+ } else if (count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) {
+ /* disable timer and record current time */
+ vcpu->arch.count_resume = kvm_mips_count_disable(vcpu);
+ } else {
+ /*
+ * Calculate timeout relative to static count at resume
+ * time (wrap 0 to 2^32).
+ */
+ count = kvm_read_c0_guest_count(cop0);
+ compare = kvm_read_c0_guest_compare(cop0);
+ delta = (u64)(uint32_t)(compare - count - 1) + 1;
+ delta = div_u64(delta * NSEC_PER_SEC,
+ vcpu->arch.count_hz);
+ expire = ktime_add_ns(vcpu->arch.count_resume, delta);
+
+ /* Handle pending interrupt */
+ now = ktime_get();
+ if (ktime_compare(now, expire) >= 0)
+ /* Nothing should be waiting on the timeout */
+ kvm_mips_callbacks->queue_timer_int(vcpu);
+
+ /* Resume hrtimer without changing bias */
+ count = kvm_mips_read_count_running(vcpu, now);
+ kvm_mips_resume_hrtimer(vcpu, now, count);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * kvm_mips_set_count_resume() - Update the count resume KVM register.
+ * @vcpu: Virtual CPU.
+ * @count_resume: Count resume register new value.
+ *
+ * Set the count resume KVM register.
+ *
+ * Returns: -EINVAL if out of valid range (0..now).
+ * 0 on success.
+ */
+int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume)
+{
+ /*
+ * It doesn't make sense for the resume time to be in the future, as it
+ * would be possible for the next interrupt to be more than a full
+ * period in the future.
+ */
+ if (count_resume < 0 || count_resume > ktime_to_ns(ktime_get()))
+ return -EINVAL;
+
+ vcpu->arch.count_resume = ns_to_ktime(count_resume);
+ return 0;
+}
+
+/**
+ * kvm_mips_count_timeout() - Push timer forward on timeout.
+ * @vcpu: Virtual CPU.
+ *
+ * Handle an hrtimer event by push the hrtimer forward a period.
+ *
+ * Returns: The hrtimer_restart value to return to the hrtimer subsystem.
+ */
+enum hrtimer_restart kvm_mips_count_timeout(struct kvm_vcpu *vcpu)
+{
+ /* Add the Count period to the current expiry time */
+ hrtimer_add_expires_ns(&vcpu->arch.comparecount_timer,
+ vcpu->arch.count_period);
+ return HRTIMER_RESTART;
}
enum emulation_result kvm_mips_emul_eret(struct kvm_vcpu *vcpu)
#endif
/* Get reg */
if ((rd == MIPS_CP0_COUNT) && (sel == 0)) {
- /* XXXKYMA: Run the Guest count register @ 1/4 the rate of the host */
- vcpu->arch.gprs[rt] = (read_c0_count() >> 2);
+ vcpu->arch.gprs[rt] = kvm_mips_read_count(vcpu);
} else if ((rd == MIPS_CP0_ERRCTL) && (sel == 0)) {
vcpu->arch.gprs[rt] = 0x0;
#ifdef CONFIG_KVM_MIPS_DYN_TRANS
}
/* Are we writing to COUNT */
else if ((rd == MIPS_CP0_COUNT) && (sel == 0)) {
- /* Linux doesn't seem to write into COUNT, we throw an error
- * if we notice a write to COUNT
- */
- /*er = EMULATE_FAIL; */
+ kvm_mips_write_count(vcpu, vcpu->arch.gprs[rt]);
goto done;
} else if ((rd == MIPS_CP0_COMPARE) && (sel == 0)) {
kvm_debug("[%#x] MTCz, COMPARE %#lx <- %#lx\n",
/* If we are writing to COMPARE */
/* Clear pending timer interrupt, if any */
kvm_mips_callbacks->dequeue_timer_int(vcpu);
- kvm_write_c0_guest_compare(cop0,
- vcpu->arch.gprs[rt]);
+ kvm_mips_write_compare(vcpu,
+ vcpu->arch.gprs[rt]);
} else if ((rd == MIPS_CP0_STATUS) && (sel == 0)) {
kvm_write_c0_guest_status(cop0,
vcpu->arch.gprs[rt]);
#ifdef CONFIG_KVM_MIPS_DYN_TRANS
kvm_mips_trans_mtc0(inst, opc, vcpu);
#endif
+ } else if ((rd == MIPS_CP0_CAUSE) && (sel == 0)) {
+ uint32_t old_cause, new_cause;
+ old_cause = kvm_read_c0_guest_cause(cop0);
+ new_cause = vcpu->arch.gprs[rt];
+ /* Update R/W bits */
+ kvm_change_c0_guest_cause(cop0, 0x08800300,
+ new_cause);
+ /* DC bit enabling/disabling timer? */
+ if ((old_cause ^ new_cause) & CAUSEF_DC) {
+ if (new_cause & CAUSEF_DC)
+ kvm_mips_count_disable_cause(vcpu);
+ else
+ kvm_mips_count_enable_cause(vcpu);
+ }
} else {
cop0->reg[rd][sel] = vcpu->arch.gprs[rt];
#ifdef CONFIG_KVM_MIPS_DYN_TRANS
printk("%s: va: %#lx, unmapped: %#x\n", __func__, va, CKSEG0ADDR(pa));
- mips32_SyncICache(CKSEG0ADDR(pa), 32);
+ local_flush_icache_range(CKSEG0ADDR(pa), 32);
return 0;
}
struct kvm_run *run, struct kvm_vcpu *vcpu)
{
enum emulation_result er = EMULATE_DONE;
-
#ifdef DEBUG
+ struct mips_coproc *cop0 = vcpu->arch.cop0;
+ unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) |
+ (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK);
+ int index;
+
/*
* If address not in the guest TLB, then we are in trouble
*/
current_cpu_data.icache.linesz);
break;
case 2: /* Read count register */
- printk("RDHWR: Cont register\n");
- arch->gprs[rt] = kvm_read_c0_guest_count(cop0);
+ arch->gprs[rt] = kvm_mips_read_count(vcpu);
break;
case 3: /* Count register resolution */
switch (current_cpu_data.cputype) {
er = EMULATE_FAIL;
}
} else {
-#ifdef DEBUG
kvm_debug
("Injecting hi: %#lx, lo0: %#lx, lo1: %#lx into shadow host TLB\n",
tlb->tlb_hi, tlb->tlb_lo0, tlb->tlb_lo1);
-#endif
/* OK we have a Guest TLB entry, now inject it into the shadow host TLB */
kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb, NULL,
NULL);
projects / firefly-linux-kernel-4.4.55.git / blobdiff