static int ibm_configure_bridge;
static int ibm_configure_pe;
+/*
+ * Buffer for reporting slot-error-detail rtas calls. Its here
+ * in BSS, and not dynamically alloced, so that it ends up in
+ * RMO where RTAS can access it.
+ */
+static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
+static DEFINE_SPINLOCK(slot_errbuf_lock);
+static int eeh_error_buf_size;
+
/**
* pseries_eeh_init - EEH platform dependent initialization
*
return -EINVAL;
}
+ /* Initialize error log lock and size */
+ spin_lock_init(&slot_errbuf_lock);
+ eeh_error_buf_size = rtas_token("rtas-error-log-max");
+ if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: unknown EEH error log size\n",
+ __func__);
+ eeh_error_buf_size = 1024;
+ } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
+ pr_warning("%s: EEH error log size %d exceeds the maximal %d\n",
+ __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
+ eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
+ }
+
return 0;
}
static int pseries_eeh_set_option(struct device_node *dn, int option)
{
int ret = 0;
- struct pci_dn *pdn;
+ struct eeh_dev *edev;
const u32 *reg;
int config_addr;
- pdn = PCI_DN(dn);
+ edev = of_node_to_eeh_dev(dn);
/*
* When we're enabling or disabling EEH functioality on
case EEH_OPT_THAW_MMIO:
case EEH_OPT_THAW_DMA:
- config_addr = pdn->eeh_config_addr;
- if (pdn->eeh_pe_config_addr)
- config_addr = pdn->eeh_pe_config_addr;
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
break;
default:
}
ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
- config_addr, BUID_HI(pdn->phb->buid),
- BUID_LO(pdn->phb->buid), option);
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), option);
return ret;
}
*/
static int pseries_eeh_get_pe_addr(struct device_node *dn)
{
- return 0;
+ struct eeh_dev *edev;
+ int ret = 0;
+ int rets[3];
+
+ edev = of_node_to_eeh_dev(dn);
+
+ if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
+ /*
+ * First of all, we need to make sure there has one PE
+ * associated with the device. Otherwise, PE address is
+ * meaningless.
+ */
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+ edev->config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), 1);
+ if (ret || (rets[0] == 0))
+ return 0;
+
+ /* Retrieve the associated PE config address */
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+ edev->config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), 0);
+ if (ret) {
+ pr_warning("%s: Failed to get PE address for %s\n",
+ __func__, dn->full_name);
+ return 0;
+ }
+
+ return rets[0];
+ }
+
+ if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
+ edev->config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), 0);
+ if (ret) {
+ pr_warning("%s: Failed to get PE address for %s\n",
+ __func__, dn->full_name);
+ return 0;
+ }
+
+ return rets[0];
+ }
+
+ return ret;
}
/**
*/
static int pseries_eeh_get_state(struct device_node *dn, int *state)
{
- return 0;
+ struct eeh_dev *edev;
+ int config_addr;
+ int ret;
+ int rets[4];
+ int result;
+
+ /* Figure out PE config address if possible */
+ edev = of_node_to_eeh_dev(dn);
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
+ /* Fake PE unavailable info */
+ rets[2] = 0;
+ ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else {
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Parse the result out */
+ result = 0;
+ if (rets[1]) {
+ switch(rets[0]) {
+ case 0:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ break;
+ case 1:
+ result |= EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ break;
+ case 2:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result &= ~EEH_STATE_MMIO_ACTIVE;
+ result &= ~EEH_STATE_DMA_ACTIVE;
+ break;
+ case 4:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result &= ~EEH_STATE_MMIO_ACTIVE;
+ result &= ~EEH_STATE_DMA_ACTIVE;
+ result |= EEH_STATE_MMIO_ENABLED;
+ break;
+ case 5:
+ if (rets[2]) {
+ if (state) *state = rets[2];
+ result = EEH_STATE_UNAVAILABLE;
+ } else {
+ result = EEH_STATE_NOT_SUPPORT;
+ }
+ default:
+ result = EEH_STATE_NOT_SUPPORT;
+ }
+ } else {
+ result = EEH_STATE_NOT_SUPPORT;
+ }
+
+ return result;
}
/**
*/
static int pseries_eeh_reset(struct device_node *dn, int option)
{
- return 0;
+ struct eeh_dev *edev;
+ int config_addr;
+ int ret;
+
+ /* Figure out PE address */
+ edev = of_node_to_eeh_dev(dn);
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ /* Reset PE through RTAS call */
+ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), option);
+
+ /* If fundamental-reset not supported, try hot-reset */
+ if (option == EEH_RESET_FUNDAMENTAL &&
+ ret == -8) {
+ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), EEH_RESET_HOT);
+ }
+
+ return ret;
}
/**
*/
static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
{
- return 0;
+ int ret;
+ int mwait;
+
+ /*
+ * According to PAPR, the state of PE might be temporarily
+ * unavailable. Under the circumstance, we have to wait
+ * for indicated time determined by firmware. The maximal
+ * wait time is 5 minutes, which is acquired from the original
+ * EEH implementation. Also, the original implementation
+ * also defined the minimal wait time as 1 second.
+ */
+#define EEH_STATE_MIN_WAIT_TIME (1000)
+#define EEH_STATE_MAX_WAIT_TIME (300 * 1000)
+
+ while (1) {
+ ret = pseries_eeh_get_state(dn, &mwait);
+
+ /*
+ * If the PE's state is temporarily unavailable,
+ * we have to wait for the specified time. Otherwise,
+ * the PE's state will be returned immediately.
+ */
+ if (ret != EEH_STATE_UNAVAILABLE)
+ return ret;
+
+ if (max_wait <= 0) {
+ pr_warning("%s: Timeout when getting PE's state (%d)\n",
+ __func__, max_wait);
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ if (mwait <= 0) {
+ pr_warning("%s: Firmware returned bad wait value %d\n",
+ __func__, mwait);
+ mwait = EEH_STATE_MIN_WAIT_TIME;
+ } else if (mwait > EEH_STATE_MAX_WAIT_TIME) {
+ pr_warning("%s: Firmware returned too long wait value %d\n",
+ __func__, mwait);
+ mwait = EEH_STATE_MAX_WAIT_TIME;
+ }
+
+ max_wait -= mwait;
+ msleep(mwait);
+ }
+
+ return EEH_STATE_NOT_SUPPORT;
}
/**
*/
static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len)
{
- return 0;
+ struct eeh_dev *edev;
+ int config_addr;
+ unsigned long flags;
+ int ret;
+
+ edev = of_node_to_eeh_dev(dn);
+ spin_lock_irqsave(&slot_errbuf_lock, flags);
+ memset(slot_errbuf, 0, eeh_error_buf_size);
+
+ /* Figure out the PE address */
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
+ BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid),
+ virt_to_phys(drv_log), len,
+ virt_to_phys(slot_errbuf), eeh_error_buf_size,
+ severity);
+ if (!ret)
+ log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
+ spin_unlock_irqrestore(&slot_errbuf_lock, flags);
+
+ return ret;
}
/**
*/
static int pseries_eeh_configure_bridge(struct device_node *dn)
{
- return 0;
+ struct eeh_dev *edev;
+ int config_addr;
+ int ret;
+
+ /* Figure out the PE address */
+ edev = of_node_to_eeh_dev(dn);
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ /* Use new configure-pe function, if supported */
+ if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else {
+ return -EFAULT;
+ }
+
+ if (ret)
+ pr_warning("%s: Unable to configure bridge %d for %s\n",
+ __func__, ret, dn->full_name);
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_read_config - Read PCI config space
+ * @dn: device node
+ * @where: PCI address
+ * @size: size to read
+ * @val: return value
+ *
+ * Read config space from the speicifed device
+ */
+static int pseries_eeh_read_config(struct device_node *dn, int where, int size, u32 *val)
+{
+ struct pci_dn *pdn;
+
+ pdn = PCI_DN(dn);
+
+ return rtas_read_config(pdn, where, size, val);
+}
+
+/**
+ * pseries_eeh_write_config - Write PCI config space
+ * @dn: device node
+ * @where: PCI address
+ * @size: size to write
+ * @val: value to be written
+ *
+ * Write config space to the specified device
+ */
+static int pseries_eeh_write_config(struct device_node *dn, int where, int size, u32 val)
+{
+ struct pci_dn *pdn;
+
+ pdn = PCI_DN(dn);
+
+ return rtas_write_config(pdn, where, size, val);
}
static struct eeh_ops pseries_eeh_ops = {
.reset = pseries_eeh_reset,
.wait_state = pseries_eeh_wait_state,
.get_log = pseries_eeh_get_log,
- .configure_bridge = pseries_eeh_configure_bridge
+ .configure_bridge = pseries_eeh_configure_bridge,
+ .read_config = pseries_eeh_read_config,
+ .write_config = pseries_eeh_write_config
};
/**
projects / firefly-linux-kernel-4.4.55.git / blobdiff