arm: dts: rk3288-android: set PWM_POLARITY_INVERTED to 0

[firefly-linux-kernel-4.4.55.git] / arch / x86 / pci / amd_bus.c

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index e88f4c53d7f6b41d4268b4eb51fad5badd514c2b..c20d2cc7ef64062e1b8bf032255253488ff94b43 100644 (file)
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -11,27 +11,33 @@
 
 #include "bus_numa.h"
 
-/*
- * This discovers the pcibus <-> node mapping on AMD K8.
- * also get peer root bus resource for io,mmio
- */
+#define AMD_NB_F0_NODE_ID                      0x60
+#define AMD_NB_F0_UNIT_ID                      0x64
+#define AMD_NB_F1_CONFIG_MAP_REG               0xe0
+
+#define RANGE_NUM                              16
+#define AMD_NB_F1_CONFIG_MAP_RANGES            4
 
-struct pci_hostbridge_probe {
+struct amd_hostbridge {
        u32 bus;
        u32 slot;
-       u32 vendor;
        u32 device;
 };
 
-static struct pci_hostbridge_probe pci_probes[] __initdata = {
-       { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
-       { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
-       { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
-       { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
+/*
+ * IMPORTANT NOTE:
+ * hb_probes[] and early_root_info_init() is in maintenance mode.
+ * It only supports K8, Fam10h, Fam11h, and Fam15h_00h-0fh .
+ * Future processor will rely on information in ACPI.
+ */
+static struct amd_hostbridge hb_probes[] __initdata = {
+       { 0, 0x18, 0x1100 }, /* K8 */
+       { 0, 0x18, 0x1200 }, /* Family10h */
+       { 0xff, 0, 0x1200 }, /* Family10h */
+       { 0, 0x18, 0x1300 }, /* Family11h */
+       { 0, 0x18, 0x1600 }, /* Family15h */
 };
 
-#define RANGE_NUM 16
-
 static struct pci_root_info __init *find_pci_root_info(int node, int link)
 {
        struct pci_root_info *info;
@@ -45,12 +51,12 @@ static struct pci_root_info __init *find_pci_root_info(int node, int link)
 }
 
 /**
- * early_fill_mp_bus_to_node()
+ * early_root_info_init()
  * called before pcibios_scan_root and pci_scan_bus
- * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
- * Registers found in the K8 northbridge
+ * fills the mp_bus_to_cpumask array based according
+ * to the LDT Bus Number Registers found in the northbridge.
  */
-static int __init early_fill_mp_bus_info(void)
+static int __init early_root_info_init(void)
 {
        int i;
        unsigned bus;
@@ -75,19 +81,21 @@ static int __init early_fill_mp_bus_info(void)
                return -1;
 
        found = false;
-       for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
+       for (i = 0; i < ARRAY_SIZE(hb_probes); i++) {
                u32 id;
                u16 device;
                u16 vendor;
 
-               bus = pci_probes[i].bus;
-               slot = pci_probes[i].slot;
+               bus = hb_probes[i].bus;
+               slot = hb_probes[i].slot;
                id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
-
                vendor = id & 0xffff;
                device = (id>>16) & 0xffff;
-               if (pci_probes[i].vendor == vendor &&
-                   pci_probes[i].device == device) {
+
+               if (vendor != PCI_VENDOR_ID_AMD)
+                       continue;
+
+               if (hb_probes[i].device == device) {
                        found = true;
                        break;
                }
@@ -96,10 +104,16 @@ static int __init early_fill_mp_bus_info(void)
        if (!found)
                return 0;
 
-       for (i = 0; i < 4; i++) {
+       /*
+        * We should learn topology and routing information from _PXM and
+        * _CRS methods in the ACPI namespace.  We extract node numbers
+        * here to work around BIOSes that don't supply _PXM.
+        */
+       for (i = 0; i < AMD_NB_F1_CONFIG_MAP_RANGES; i++) {
                int min_bus;
                int max_bus;
-               reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
+               reg = read_pci_config(bus, slot, 1,
+                               AMD_NB_F1_CONFIG_MAP_REG + (i << 2));
 
                /* Check if that register is enabled for bus range */
                if ((reg & 7) != 3)
@@ -113,10 +127,21 @@ static int __init early_fill_mp_bus_info(void)
                info = alloc_pci_root_info(min_bus, max_bus, node, link);
        }
 
+       /*
+        * The following code extracts routing information for use on old
+        * systems where Linux doesn't automatically use host bridge _CRS
+        * methods (or when the user specifies "pci=nocrs").
+        *
+        * We only do this through Fam11h, because _CRS should be enough on
+        * newer systems.
+        */
+       if (boot_cpu_data.x86 > 0x11)
+               return 0;
+
        /* get the default node and link for left over res */
-       reg = read_pci_config(bus, slot, 0, 0x60);
+       reg = read_pci_config(bus, slot, 0, AMD_NB_F0_NODE_ID);
        def_node = (reg >> 8) & 0x07;
-       reg = read_pci_config(bus, slot, 0, 0x64);
+       reg = read_pci_config(bus, slot, 0, AMD_NB_F0_UNIT_ID);
        def_link = (reg >> 8) & 0x03;
 
        memset(range, 0, sizeof(range));
@@ -363,7 +388,7 @@ static int __init pci_io_ecs_init(void)
        int cpu;
 
        /* assume all cpus from fam10h have IO ECS */
-        if (boot_cpu_data.x86 < 0x10)
+       if (boot_cpu_data.x86 < 0x10)
                return 0;
 
        /* Try the PCI method first. */
@@ -387,7 +412,7 @@ static int __init amd_postcore_init(void)
        if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
                return 0;
 
-       early_fill_mp_bus_info();
+       early_root_info_init();
        pci_io_ecs_init();
 
        return 0;