ACPI: Better describe ACPI_DEBUGGER

[firefly-linux-kernel-4.4.55.git] / drivers / acpi / acpi_lpss.c

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 46b58abb08c5e05efb9111f76e788a3601f6046c..f51bd0d0bc17ceced34eab34463c8f048430de91 100644 (file)
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
@@ -60,6 +59,7 @@ ACPI_MODULE_NAME("acpi_lpss");
 #define LPSS_CLK_DIVIDER               BIT(2)
 #define LPSS_LTR                       BIT(3)
 #define LPSS_SAVE_CTX                  BIT(4)
+#define LPSS_NO_D3_DELAY               BIT(5)
 
 struct lpss_private_data;
 
@@ -156,6 +156,10 @@ static const struct lpss_device_desc byt_pwm_dev_desc = {
        .flags = LPSS_SAVE_CTX,
 };
 
+static const struct lpss_device_desc bsw_pwm_dev_desc = {
+       .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
+};
+
 static const struct lpss_device_desc byt_uart_dev_desc = {
        .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
        .clk_con_id = "baudclk",
@@ -163,6 +167,14 @@ static const struct lpss_device_desc byt_uart_dev_desc = {
        .setup = lpss_uart_setup,
 };
 
+static const struct lpss_device_desc bsw_uart_dev_desc = {
+       .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
+                       | LPSS_NO_D3_DELAY,
+       .clk_con_id = "baudclk",
+       .prv_offset = 0x800,
+       .setup = lpss_uart_setup,
+};
+
 static const struct lpss_device_desc byt_spi_dev_desc = {
        .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
        .prv_offset = 0x400,
@@ -178,8 +190,15 @@ static const struct lpss_device_desc byt_i2c_dev_desc = {
        .setup = byt_i2c_setup,
 };
 
+static const struct lpss_device_desc bsw_i2c_dev_desc = {
+       .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
+       .prv_offset = 0x800,
+       .setup = byt_i2c_setup,
+};
+
 static struct lpss_device_desc bsw_spi_dev_desc = {
-       .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+       .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
+                       | LPSS_NO_D3_DELAY,
        .prv_offset = 0x400,
        .setup = lpss_deassert_reset,
 };
@@ -214,11 +233,12 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
        { "INT33FC", },
 
        /* Braswell LPSS devices */
-       { "80862288", LPSS_ADDR(byt_pwm_dev_desc) },
-       { "8086228A", LPSS_ADDR(byt_uart_dev_desc) },
+       { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
+       { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
        { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
-       { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) },
+       { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 
+       /* Broadwell LPSS devices */
        { "INT3430", LPSS_ADDR(lpt_dev_desc) },
        { "INT3431", LPSS_ADDR(lpt_dev_desc) },
        { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
@@ -558,9 +578,14 @@ static void acpi_lpss_restore_ctx(struct device *dev,
         * The following delay is needed or the subsequent write operations may
         * fail. The LPSS devices are actually PCI devices and the PCI spec
         * expects 10ms delay before the device can be accessed after D3 to D0
-        * transition.
+        * transition. However some platforms like BSW does not need this delay.
         */
-       msleep(10);
+       unsigned int delay = 10;        /* default 10ms delay */
+
+       if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
+               delay = 0;
+
+       msleep(delay);
 
        for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
                unsigned long offset = i * sizeof(u32);