USB: serial: ftdi_sio: Add support for new Xsens devices

[firefly-linux-kernel-4.4.55.git] / drivers / ata / sata_mv.c

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 35c6b6d09c277526d93461388b6971069c644341..b256ff5b65794dab8decc4ab85ee64e9d0ccbf1e 100644 (file)
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -304,6 +304,7 @@ enum {
        MV5_LTMODE              = 0x30,
        MV5_PHY_CTL             = 0x0C,
        SATA_IFCFG              = 0x050,
+       LP_PHY_CTL              = 0x058,
 
        MV_M2_PREAMP_MASK       = 0x7e0,
 
@@ -431,6 +432,7 @@ enum {
        MV_HP_CUT_THROUGH       = (1 << 10),    /* can use EDMA cut-through */
        MV_HP_FLAG_SOC          = (1 << 11),    /* SystemOnChip, no PCI */
        MV_HP_QUIRK_LED_BLINK_EN = (1 << 12),   /* is led blinking enabled? */
+       MV_HP_FIX_LP_PHY_CTL    = (1 << 13),    /* fix speed in LP_PHY_CTL ? */
 
        /* Port private flags (pp_flags) */
        MV_PP_FLAG_EDMA_EN      = (1 << 0),     /* is EDMA engine enabled? */
@@ -1353,6 +1355,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 
        if (ofs != 0xffffffffU) {
                void __iomem *addr = mv_ap_base(link->ap) + ofs;
+               struct mv_host_priv *hpriv = link->ap->host->private_data;
                if (sc_reg_in == SCR_CONTROL) {
                        /*
                         * Workaround for 88SX60x1 FEr SATA#26:
@@ -1369,6 +1372,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
                         */
                        if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
                                val |= 0xf000;
+
+                       if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) {
+                               void __iomem *lp_phy_addr =
+                                       mv_ap_base(link->ap) + LP_PHY_CTL;
+                               /*
+                                * Set PHY speed according to SControl speed.
+                                */
+                               if ((val & 0xf0) == 0x10)
+                                       writelfl(0x7, lp_phy_addr);
+                               else
+                                       writelfl(0x227, lp_phy_addr);
+                       }
                }
                writelfl(val, addr);
                return 0;
@@ -4111,6 +4126,15 @@ static int mv_platform_probe(struct platform_device *pdev)
        if (rc)
                goto err;
 
+       /*
+        * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be
+        * updated in the LP_PHY_CTL register.
+        */
+       if (pdev->dev.of_node &&
+               of_device_is_compatible(pdev->dev.of_node,
+                                       "marvell,armada-370-sata"))
+               hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL;
+
        /* initialize adapter */
        rc = mv_init_host(host);
        if (rc)
@@ -4216,6 +4240,7 @@ static int mv_platform_resume(struct platform_device *pdev)
 
 #ifdef CONFIG_OF
 static struct of_device_id mv_sata_dt_ids[] = {
+       { .compatible = "marvell,armada-370-sata", },
        { .compatible = "marvell,orion-sata", },
        {},
 };