crypto: caam - Set last bit on src SG list

[firefly-linux-kernel-4.4.55.git] / drivers / crypto / Kconfig

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 8a76a012be614c36b5436ab6d3414dc06a9ff35c..7a72797f6f586c05f7bd1a542c3b5eeec9989605 100644 (file)
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -162,9 +162,8 @@ config CRYPTO_GHASH_S390
 config CRYPTO_DEV_MV_CESA
        tristate "Marvell's Cryptographic Engine"
        depends on PLAT_ORION
-       select CRYPTO_ALGAPI
        select CRYPTO_AES
-       select CRYPTO_BLKCIPHER2
+       select CRYPTO_BLKCIPHER
        select CRYPTO_HASH
        help
          This driver allows you to utilize the Cryptographic Engines and
@@ -176,7 +175,8 @@ config CRYPTO_DEV_MV_CESA
 config CRYPTO_DEV_NIAGARA2
        tristate "Niagara2 Stream Processing Unit driver"
        select CRYPTO_DES
-       select CRYPTO_ALGAPI
+       select CRYPTO_BLKCIPHER
+       select CRYPTO_HASH
        depends on SPARC64
        help
          Each core of a Niagara2 processor contains a Stream
@@ -189,7 +189,6 @@ config CRYPTO_DEV_NIAGARA2
 config CRYPTO_DEV_HIFN_795X
        tristate "Driver HIFN 795x crypto accelerator chips"
        select CRYPTO_DES
-       select CRYPTO_ALGAPI
        select CRYPTO_BLKCIPHER
        select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG
        depends on PCI
@@ -208,8 +207,10 @@ source drivers/crypto/caam/Kconfig
 
 config CRYPTO_DEV_TALITOS
        tristate "Talitos Freescale Security Engine (SEC)"
-       select CRYPTO_ALGAPI
+       select CRYPTO_AEAD
        select CRYPTO_AUTHENC
+       select CRYPTO_BLKCIPHER
+       select CRYPTO_HASH
        select HW_RANDOM
        depends on FSL_SOC
        help
@@ -244,7 +245,7 @@ config CRYPTO_DEV_IXP4XX
        tristate "Driver for IXP4xx crypto hardware acceleration"
        depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE
        select CRYPTO_DES
-       select CRYPTO_ALGAPI
+       select CRYPTO_AEAD
        select CRYPTO_AUTHENC
        select CRYPTO_BLKCIPHER
        help
@@ -254,7 +255,6 @@ config CRYPTO_DEV_PPC4XX
        tristate "Driver AMCC PPC4xx crypto accelerator"
        depends on PPC && 4xx
        select CRYPTO_HASH
-       select CRYPTO_ALGAPI
        select CRYPTO_BLKCIPHER
        help
          This option allows you to have support for AMCC crypto acceleration.
@@ -275,7 +275,7 @@ config CRYPTO_DEV_OMAP_AES
        tristate "Support for OMAP AES hw engine"
        depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS
        select CRYPTO_AES
-       select CRYPTO_BLKCIPHER2
+       select CRYPTO_BLKCIPHER
        help
          OMAP processors have AES module accelerator. Select this if you
          want to use the OMAP module for AES algorithms.
@@ -284,7 +284,7 @@ config CRYPTO_DEV_OMAP_DES
        tristate "Support for OMAP DES3DES hw engine"
        depends on ARCH_OMAP2PLUS
        select CRYPTO_DES
-       select CRYPTO_BLKCIPHER2
+       select CRYPTO_BLKCIPHER
        help
          OMAP processors have DES/3DES module accelerator. Select this if you
          want to use the OMAP module for DES and 3DES algorithms. Currently
@@ -294,9 +294,10 @@ config CRYPTO_DEV_OMAP_DES
 config CRYPTO_DEV_PICOXCELL
        tristate "Support for picoXcell IPSEC and Layer2 crypto engines"
        depends on ARCH_PICOXCELL && HAVE_CLK
+       select CRYPTO_AEAD
        select CRYPTO_AES
        select CRYPTO_AUTHENC
-       select CRYPTO_ALGAPI
+       select CRYPTO_BLKCIPHER
        select CRYPTO_DES
        select CRYPTO_CBC
        select CRYPTO_ECB
@@ -322,7 +323,6 @@ config CRYPTO_DEV_S5P
        tristate "Support for Samsung S5PV210/Exynos crypto accelerator"
        depends on ARCH_S5PV210 || ARCH_EXYNOS
        select CRYPTO_AES
-       select CRYPTO_ALGAPI
        select CRYPTO_BLKCIPHER
        help
          This option allows you to have support for S5P crypto acceleration.
@@ -330,11 +330,13 @@ config CRYPTO_DEV_S5P
          algorithms execution.
 
 config CRYPTO_DEV_NX
-       bool "Support for IBM Power7+ in-Nest cryptographic acceleration"
-       depends on PPC64 && IBMVIO && !CPU_LITTLE_ENDIAN
-       default n
+       bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration"
+       depends on PPC64
        help
-         Support for Power7+ in-Nest cryptographic acceleration.
+         This enables support for the NX hardware cryptographic accelerator
+         coprocessor that is in IBM PowerPC P7+ or later processors.  This
+         does not actually enable any drivers, it only allows you to select
+         which acceleration type (encryption and/or compression) to enable.
 
 if CRYPTO_DEV_NX
        source "drivers/crypto/nx/Kconfig"
@@ -343,7 +345,6 @@ endif
 config CRYPTO_DEV_UX500
        tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration"
        depends on ARCH_U8500
-       select CRYPTO_ALGAPI
        help
          Driver for ST-Ericsson UX500 crypto engine.
 
@@ -361,10 +362,7 @@ config CRYPTO_DEV_BFIN_CRC
 config CRYPTO_DEV_ATMEL_AES
        tristate "Support for Atmel AES hw accelerator"
        depends on ARCH_AT91
-       select CRYPTO_CBC
-       select CRYPTO_ECB
        select CRYPTO_AES
-       select CRYPTO_ALGAPI
        select CRYPTO_BLKCIPHER
        select AT_HDMAC
        help
@@ -379,9 +377,6 @@ config CRYPTO_DEV_ATMEL_TDES
        tristate "Support for Atmel DES/TDES hw accelerator"
        depends on ARCH_AT91
        select CRYPTO_DES
-       select CRYPTO_CBC
-       select CRYPTO_ECB
-       select CRYPTO_ALGAPI
        select CRYPTO_BLKCIPHER
        help
          Some Atmel processors have DES/TDES hw accelerator.
@@ -394,10 +389,7 @@ config CRYPTO_DEV_ATMEL_TDES
 config CRYPTO_DEV_ATMEL_SHA
        tristate "Support for Atmel SHA hw accelerator"
        depends on ARCH_AT91
-       select CRYPTO_SHA1
-       select CRYPTO_SHA256
-       select CRYPTO_SHA512
-       select CRYPTO_ALGAPI
+       select CRYPTO_HASH
        help
          Some Atmel processors have SHA1/SHA224/SHA256/SHA384/SHA512
          hw accelerator.
@@ -410,7 +402,6 @@ config CRYPTO_DEV_ATMEL_SHA
 config CRYPTO_DEV_CCP
        bool "Support for AMD Cryptographic Coprocessor"
        depends on ((X86 && PCI) || (ARM64 && (OF_ADDRESS || ACPI))) && HAS_IOMEM
-       default n
        help
          The AMD Cryptographic Coprocessor provides hardware support
          for encryption, hashing and related operations.
@@ -422,13 +413,11 @@ endif
 config CRYPTO_DEV_MXS_DCP
        tristate "Support for Freescale MXS DCP"
        depends on ARCH_MXS
-       select CRYPTO_SHA1
-       select CRYPTO_SHA256
        select CRYPTO_CBC
        select CRYPTO_ECB
        select CRYPTO_AES
        select CRYPTO_BLKCIPHER
-       select CRYPTO_ALGAPI
+       select CRYPTO_HASH
        help
          The Freescale i.MX23/i.MX28 has SHA1/SHA256 and AES128 CBC/ECB
          co-processor on the die.
@@ -447,7 +436,6 @@ config CRYPTO_DEV_QCE
        select CRYPTO_CBC
        select CRYPTO_XTS
        select CRYPTO_CTR
-       select CRYPTO_ALGAPI
        select CRYPTO_BLKCIPHER
        help
          This driver supports Qualcomm crypto engine accelerator
@@ -457,16 +445,15 @@ config CRYPTO_DEV_QCE
 config CRYPTO_DEV_VMX
        bool "Support for VMX cryptographic acceleration instructions"
        depends on PPC64
-       default n
        help
          Support for VMX cryptographic acceleration instructions.
 
 source "drivers/crypto/vmx/Kconfig"
 
 config CRYPTO_DEV_IMGTEC_HASH
-       depends on MIPS || COMPILE_TEST
        tristate "Imagination Technologies hardware hash accelerator"
-       select CRYPTO_ALGAPI
+       depends on MIPS || COMPILE_TEST
+       depends on HAS_DMA
        select CRYPTO_MD5
        select CRYPTO_SHA1
        select CRYPTO_SHA256