struct i7core_inject inject;
struct i7core_channel channel[NUM_CHANS];
- int channels; /* Number of active channels */
-
int ce_count_available;
int csrow_map[NUM_CHANS][MAX_DIMMS];
/* Memory controller */
{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
- /* Exists only for RDIMM */
+
+ /* Exists only for RDIMM */
{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
-
- /* Generic Non-core registers */
- /*
- * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
- * On Xeon 55xx, however, it has a different id (8086:2c40). So,
- * the probing code needs to test for the other address in case of
- * failure of this one
- */
- { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
-
};
static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
-
- /*
- * This is the PCI device has an alternate address on some
- * processors like Core i7 860
- */
- { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
};
static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
-
- /* Generic Non-core registers */
- { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
-
};
#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+ {0,} /* 0 terminated list. */
};
/*
return 0;
}
-static int get_dimm_config(const struct mem_ctl_info *mci, int *csrow)
+static int get_dimm_config(const struct mem_ctl_info *mci)
{
struct i7core_pvt *pvt = mci->pvt_info;
struct csrow_info *csr;
struct pci_dev *pdev;
int i, j;
+ int csrow = 0;
unsigned long last_page = 0;
enum edac_type mode;
enum mem_type mtype;
npages = MiB_TO_PAGES(size);
- csr = &mci->csrows[*csrow];
+ csr = &mci->csrows[csrow];
csr->first_page = last_page + 1;
last_page += npages;
csr->last_page = last_page;
csr->page_mask = 0;
csr->grain = 8;
- csr->csrow_idx = *csrow;
+ csr->csrow_idx = csrow;
csr->nr_channels = 1;
csr->channels[0].chan_idx = i;
csr->channels[0].ce_count = 0;
- pvt->csrow_map[i][j] = *csrow;
+ pvt->csrow_map[i][j] = csrow;
switch (banks) {
case 4:
csr->edac_mode = mode;
csr->mtype = mtype;
- (*csrow)++;
+ csrow++;
}
pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
dev_descr->dev_id, *prev);
- /*
- * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
- * is at addr 8086:2c40, instead of 8086:2c41. So, we need
- * to probe for the alternate address in case of failure
- */
- if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
-
- if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
- *prev);
-
if (!pdev) {
if (*prev) {
*prev = pdev;
dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ /*
+ * As stated on drivers/pci/search.c, the reference count for
+ * @from is always decremented if it is not %NULL. So, as we need
+ * to get all devices up to null, we need to do a get for the device
+ */
+ pci_dev_get(pdev);
+
*prev = pdev;
return 0;
static int i7core_get_all_devices(void)
{
- int i, j, rc, last_bus;
+ int i, rc, last_bus;
struct pci_dev *pdev = NULL;
- const struct pci_id_table *table;
+ const struct pci_id_table *table = pci_dev_table;
last_bus = i7core_pci_lastbus();
- for (j = 0; j < ARRAY_SIZE(pci_dev_table); j++) {
- table = &pci_dev_table[j];
+ while (table && table->descr) {
for (i = 0; i < table->n_devs; i++) {
pdev = NULL;
do {
}
} while (pdev);
}
+ table++;
}
return 0;
struct pci_dev *pdev;
int i, func, slot;
- /* Associates i7core_dev and mci for future usage */
- pvt->i7core_dev = i7core_dev;
- i7core_dev->mci = mci;
-
pvt->is_registered = 0;
for (i = 0; i < i7core_dev->n_devs; i++) {
pdev = i7core_dev->pdev[i];
pvt->i7core_pci = NULL;
}
-static int i7core_register_mci(struct i7core_dev *i7core_dev,
- const int num_channels, const int num_csrows)
+static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
+{
+ struct mem_ctl_info *mci = i7core_dev->mci;
+ struct i7core_pvt *pvt;
+
+ if (unlikely(!mci || !mci->pvt_info)) {
+ debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
+ __func__, &i7core_dev->pdev[0]->dev);
+
+ i7core_printk(KERN_ERR, "Couldn't find mci handler\n");
+ return;
+ }
+
+ pvt = mci->pvt_info;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+ __func__, mci, &i7core_dev->pdev[0]->dev);
+
+ /* Disable MCE NMI handler */
+ edac_mce_unregister(&pvt->edac_mce);
+
+ /* Disable EDAC polling */
+ i7core_pci_ctl_release(pvt);
+
+ /* Remove MC sysfs nodes */
+ edac_mc_del_mc(mci->dev);
+
+ debugf1("%s: free mci struct\n", mci->ctl_name);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ i7core_dev->mci = NULL;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev)
{
struct mem_ctl_info *mci;
struct i7core_pvt *pvt;
- int csrow = 0;
- int rc;
+ int rc, channels, csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = i7core_get_active_channels(i7core_dev->socket, &channels, &csrows);
+ if (unlikely(rc < 0))
+ return rc;
/* allocate a new MC control structure */
- mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
- i7core_dev->socket);
+ mci = edac_mc_alloc(sizeof(*pvt), csrows, channels, i7core_dev->socket);
if (unlikely(!mci))
return -ENOMEM;
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
+ /* Associates i7core_dev and mci for future usage */
+ pvt->i7core_dev = i7core_dev;
+ i7core_dev->mci = mci;
+
/*
* FIXME: how to handle RDDR3 at MCI level? It is possible to have
* Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
mci->mc_driver_sysfs_attributes = i7core_sysfs_udimm_attrs;
/* Get dimm basic config */
- get_dimm_config(mci, &csrow);
+ get_dimm_config(mci);
/* record ptr to the generic device */
mci->dev = &i7core_dev->pdev[0]->dev;
/* Set the function pointer to an actual operation function */
fail0:
kfree(mci->ctl_name);
edac_mc_free(mci);
+ i7core_dev->mci = NULL;
return rc;
}
*/
if (unlikely(probed >= 1)) {
mutex_unlock(&i7core_edac_lock);
- return -EINVAL;
+ return -ENODEV;
}
probed++;
goto fail0;
list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
- int channels;
- int csrows;
-
- /* Check the number of active and not disabled channels */
- rc = i7core_get_active_channels(i7core_dev->socket,
- &channels, &csrows);
- if (unlikely(rc < 0))
- goto fail1;
-
- rc = i7core_register_mci(i7core_dev, channels, csrows);
+ rc = i7core_register_mci(i7core_dev);
if (unlikely(rc < 0))
goto fail1;
}
return 0;
fail1:
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list)
+ i7core_unregister_mci(i7core_dev);
+
i7core_put_all_devices();
fail0:
mutex_unlock(&i7core_edac_lock);
*/
static void __devexit i7core_remove(struct pci_dev *pdev)
{
- struct mem_ctl_info *mci;
struct i7core_dev *i7core_dev;
- struct i7core_pvt *pvt;
debugf0(__FILE__ ": %s()\n", __func__);
return;
}
- list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
- mci = i7core_dev->mci;
- if (unlikely(!mci || !mci->pvt_info)) {
- debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
- __func__, &i7core_dev->pdev[0]->dev);
-
- i7core_printk(KERN_ERR,
- "Couldn't find mci hanler\n");
- } else {
- pvt = mci->pvt_info;
-
- debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
- __func__, mci, &i7core_dev->pdev[0]->dev);
-
- /* Disable MCE NMI handler */
- edac_mce_unregister(&pvt->edac_mce);
-
- /* Disable EDAC polling */
- i7core_pci_ctl_release(pvt);
-
- /* Remove MC sysfs nodes */
- edac_mc_del_mc(mci->dev);
-
- debugf1("%s: free mci struct\n", mci->ctl_name);
- kfree(mci->ctl_name);
- edac_mc_free(mci);
- }
- }
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list)
+ i7core_unregister_mci(i7core_dev);
/* Release PCI resources */
i7core_put_all_devices();