temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
reg = FDI_RX_CTL(pipe);
temp &= ~FDI_LINK_TRAIN_AUTO;
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_RX_ENABLE);
POSTING_READ(reg);
I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
}
+ /*
+ * On ILK+ LUT must be loaded before the pipe is running but with
+ * clocks enabled
+ */
+ intel_crtc_load_lut(crtc);
+
intel_enable_pipe(dev_priv, pipe, is_pch_port);
intel_enable_plane(dev_priv, plane, pipe);
if (is_pch_port)
ironlake_pch_enable(crtc);
- intel_crtc_load_lut(crtc);
-
mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
mutex_unlock(&dev->struct_mutex);
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
- return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
+ return dev_priv->lvds_use_ssc && i915_panel_use_ssc
+ && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
} else if (is_sdvo && is_tv)
factor = 20;
- if (clock.m1 < factor * clock.n)
+ if (clock.m < factor * clock.n)
fp |= FP_CB_TUNE;
dpll = 0;
int i;
/* The clocks have to be on to load the palette. */
- if (!crtc->enabled)
+ if (!crtc->enabled || !intel_crtc->active)
return;
/* use legacy palette for Ironlake */
I915_WRITE(CURBASE(pipe), base);
}
+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ bool visible = base != 0;
+
+ if (intel_crtc->cursor_visible != visible) {
+ uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+ if (base) {
+ cntl &= ~CURSOR_MODE;
+ cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ } else {
+ cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ cntl |= CURSOR_MODE_DISABLE;
+ }
+ I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+ intel_crtc->cursor_visible = visible;
+ }
+ /* and commit changes on next vblank */
+ I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
bool on)
if (!visible && !intel_crtc->cursor_visible)
return;
- I915_WRITE(CURPOS(pipe), pos);
- if (IS_845G(dev) || IS_I865G(dev))
- i845_update_cursor(crtc, base);
- else
- i9xx_update_cursor(crtc, base);
+ if (IS_IVYBRIDGE(dev)) {
+ I915_WRITE(CURPOS_IVB(pipe), pos);
+ ivb_update_cursor(crtc, base);
+ } else {
+ I915_WRITE(CURPOS(pipe), pos);
+ if (IS_845G(dev) || IS_I865G(dev))
+ i845_update_cursor(crtc, base);
+ else
+ i9xx_update_cursor(crtc, base);
+ }
if (visible)
intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+ * gating disable must be set. Failure to set it results in
+ * flickering pixels due to Z write ordering failures after
+ * some amount of runtime in the Mesa "fire" demo, and Unigine
+ * Sanctuary and Tropics, and apparently anything else with
+ * alpha test or pixel discard.
+ *
+ * According to the spec, bit 11 (RCCUNIT) must also be set,
+ * but we didn't debug actual testcases to find it out.
+ */
+ I915_WRITE(GEN6_UCGCTL2,
+ GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+ GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
/*
* According to the spec the following bits should be
* set in order to enable memory self-refresh and fbc:
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ /* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
+ /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+ /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+ I915_WRITE(GEN7_L3CNTLREG1,
+ GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+ GEN7_WA_L3_CHICKEN_MODE);
+
+ /* This is required by WaCatErrorRejectionIssue */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
for_each_pipe(pipe)
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
}
+/*
+ * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
+ */
+static void quirk_ssc_force_disable(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+}
+
struct intel_quirk {
int device;
int subsystem_vendor;
/* 855 & before need to leave pipe A & dpll A up */
{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+
+ /* Lenovo U160 cannot use SSC on LVDS */
+ { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
};
static void intel_init_quirks(struct drm_device *dev)
intel_init_emon(dev);
}
- if (IS_GEN6(dev))
+ if (IS_GEN6(dev) || IS_GEN7(dev))
gen6_enable_rps(dev_priv);
INIT_WORK(&dev_priv->idle_work, intel_idle_update);
if (IS_IRONLAKE_M(dev))
ironlake_disable_drps(dev);
- if (IS_GEN6(dev))
+ if (IS_GEN6(dev) || IS_GEN7(dev))
gen6_disable_rps(dev);
if (IS_IRONLAKE_M(dev))