#include <drm/drm_crtc_helper.h>
#include <linux/dma_remapping.h>
+#define DIV_ROUND_CLOSEST_ULL(ll, d) \
+ ({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; })
+
static void intel_increase_pllclock(struct drm_crtc *crtc);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_i915_gem_object *obj);
+static void intel_dp_set_m_n(struct intel_crtc *crtc);
+static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
+static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
+static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
+ struct intel_link_m_n *m_n);
+static void ironlake_set_pipeconf(struct drm_crtc *crtc);
+static void haswell_set_pipeconf(struct drm_crtc *crtc);
+static void intel_set_pipe_csc(struct drm_crtc *crtc);
+static void vlv_prepare_pll(struct intel_crtc *crtc);
typedef struct {
int min, max;
.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
};
+static const intel_limit_t intel_limits_chv = {
+ /*
+ * These are the data rate limits (measured in fast clocks)
+ * since those are the strictest limits we have. The fast
+ * clock and actual rate limits are more relaxed, so checking
+ * them would make no difference.
+ */
+ .dot = { .min = 25000 * 5, .max = 540000 * 5},
+ .vco = { .min = 4860000, .max = 6700000 },
+ .n = { .min = 1, .max = 1 },
+ .m1 = { .min = 2, .max = 2 },
+ .m2 = { .min = 24 << 22, .max = 175 << 22 },
+ .p1 = { .min = 2, .max = 4 },
+ .p2 = { .p2_slow = 1, .p2_fast = 14 },
+};
+
static void vlv_clock(int refclk, intel_clock_t *clock)
{
clock->m = clock->m1 * clock->m2;
limit = &intel_limits_pineview_lvds;
else
limit = &intel_limits_pineview_sdvo;
+ } else if (IS_CHERRYVIEW(dev)) {
+ limit = &intel_limits_chv;
} else if (IS_VALLEYVIEW(dev)) {
limit = &intel_limits_vlv;
} else if (!IS_GEN2(dev)) {
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}
+static void chv_clock(int refclk, intel_clock_t *clock)
+{
+ clock->m = clock->m1 * clock->m2;
+ clock->p = clock->p1 * clock->p2;
+ if (WARN_ON(clock->n == 0 || clock->p == 0))
+ return;
+ clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
+ clock->n << 22);
+ clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+}
+
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
return found;
}
+static bool
+chv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ uint64_t m2;
+ int found = false;
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ /*
+ * Based on hardware doc, the n always set to 1, and m1 always
+ * set to 2. If requires to support 200Mhz refclk, we need to
+ * revisit this because n may not 1 anymore.
+ */
+ clock.n = 1, clock.m1 = 2;
+ target *= 5; /* fast clock */
+
+ for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
+ for (clock.p2 = limit->p2.p2_fast;
+ clock.p2 >= limit->p2.p2_slow;
+ clock.p2 -= clock.p2 > 10 ? 2 : 1) {
+
+ clock.p = clock.p1 * clock.p2;
+
+ m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
+ clock.n) << 22, refclk * clock.m1);
+
+ if (m2 > INT_MAX/clock.m1)
+ continue;
+
+ clock.m2 = m2;
+
+ chv_clock(refclk, &clock);
+
+ if (!intel_PLL_is_valid(dev, limit, &clock))
+ continue;
+
+ /* based on hardware requirement, prefer bigger p
+ */
+ if (clock.p > best_clock->p) {
+ *best_clock = clock;
+ found = true;
+ }
+ }
+ }
+
+ return found;
+}
+
bool intel_crtc_active(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 bit;
if (HAS_PCH_IBX(dev_priv->dev)) {
- switch(port->port) {
+ switch (port->port) {
case PORT_B:
bit = SDE_PORTB_HOTPLUG;
break;
return true;
}
} else {
- switch(port->port) {
+ switch (port->port) {
case PORT_B:
bit = SDE_PORTB_HOTPLUG_CPT;
break;
if (IS_845G(dev) || IS_I865G(dev))
cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
- else if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev))
- cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
else
- cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
+ cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
WARN(cur_state != state,
"cursor on pipe %c assertion failure (expected %s, current %s)\n",
u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
return false;
+ } else if (IS_CHERRYVIEW(dev_priv->dev)) {
+ if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
+ return false;
} else {
if ((val & DP_PIPE_MASK) != (pipe << 30))
return false;
if (HAS_PCH_CPT(dev_priv->dev)) {
if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
return false;
+ } else if (IS_CHERRYVIEW(dev_priv->dev)) {
+ if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
+ return false;
} else {
if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
return false;
if (!IS_VALLEYVIEW(dev))
return;
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+ /*
+ * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+ * CHV x1 PHY (DP/HDMI D)
+ * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+ */
+ if (IS_CHERRYVIEW(dev)) {
+ DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+ DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+ } else {
+ DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+ }
}
static void intel_reset_dpio(struct drm_device *dev)
DPLL_REFA_CLK_ENABLE_VLV |
DPLL_INTEGRATED_CRI_CLK_VLV);
- /*
- * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
- * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
- * a. GUnit 0x2110 bit[0] set to 1 (def 0)
- * b. The other bits such as sfr settings / modesel may all be set
- * to 0.
- *
- * This should only be done on init and resume from S3 with both
- * PLLs disabled, or we risk losing DPIO and PLL synchronization.
- */
- I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+ if (IS_CHERRYVIEW(dev)) {
+ enum dpio_phy phy;
+ u32 val;
+
+ for (phy = DPIO_PHY0; phy < I915_NUM_PHYS_VLV; phy++) {
+ /* Poll for phypwrgood signal */
+ if (wait_for(I915_READ(DISPLAY_PHY_STATUS) &
+ PHY_POWERGOOD(phy), 1))
+ DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+ /*
+ * Deassert common lane reset for PHY.
+ *
+ * This should only be done on init and resume from S3
+ * with both PLLs disabled, or we risk losing DPIO and
+ * PLL synchronization.
+ */
+ val = I915_READ(DISPLAY_PHY_CONTROL);
+ I915_WRITE(DISPLAY_PHY_CONTROL,
+ PHY_COM_LANE_RESET_DEASSERT(phy, val));
+ }
+
+ } else {
+ /*
+ * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+ * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
+ * a. GUnit 0x2110 bit[0] set to 1 (def 0)
+ * b. The other bits such as sfr settings / modesel may all
+ * be set to 0.
+ *
+ * This should only be done on init and resume from S3 with
+ * both PLLs disabled, or we risk losing DPIO and PLL
+ * synchronization.
+ */
+ I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+ }
}
static void vlv_enable_pll(struct intel_crtc *crtc)
udelay(150); /* wait for warmup */
}
+static void chv_enable_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ u32 tmp;
+
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ /* Enable back the 10bit clock to display controller */
+ tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
+ tmp |= DPIO_DCLKP_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
+
+ /*
+ * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
+ */
+ udelay(1);
+
+ /* Enable PLL */
+ I915_WRITE(DPLL(pipe), crtc->config.dpll_hw_state.dpll);
+
+ /* Check PLL is locked */
+ if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+ DRM_ERROR("PLL %d failed to lock\n", pipe);
+
+ /* not sure when this should be written */
+ I915_WRITE(DPLL_MD(pipe), crtc->config.dpll_hw_state.dpll_md);
+ POSTING_READ(DPLL_MD(pipe));
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
static void i9xx_enable_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
+
+}
+
+static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ u32 val;
+
+ /* Make sure the pipe isn't still relying on us */
+ assert_pipe_disabled(dev_priv, pipe);
+
+ /* Set PLL en = 0 */
+ val = DPLL_SSC_REF_CLOCK_CHV;
+ if (pipe != PIPE_A)
+ val |= DPLL_INTEGRATED_CRI_CLK_VLV;
+ I915_WRITE(DPLL(pipe), val);
+ POSTING_READ(DPLL(pipe));
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ /* Disable 10bit clock to display controller */
+ val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
+ val &= ~DPIO_DCLKP_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
+
+ mutex_unlock(&dev_priv->dpio_lock);
}
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
struct intel_digital_port *dport)
{
u32 port_mask;
+ int dpll_reg;
switch (dport->port) {
case PORT_B:
port_mask = DPLL_PORTB_READY_MASK;
+ dpll_reg = DPLL(0);
break;
case PORT_C:
port_mask = DPLL_PORTC_READY_MASK;
+ dpll_reg = DPLL(0);
+ break;
+ case PORT_D:
+ port_mask = DPLL_PORTD_READY_MASK;
+ dpll_reg = DPIO_PHY_STATUS;
break;
default:
BUG();
}
- if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
+ if (wait_for((I915_READ(dpll_reg) & port_mask) == 0, 1000))
WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
- port_name(dport->port), I915_READ(DPLL(0)));
+ port_name(dport->port), I915_READ(dpll_reg));
+}
+
+static void intel_prepare_shared_dpll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
+
+ WARN_ON(!pll->refcount);
+ if (pll->active == 0) {
+ DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
+ WARN_ON(pll->on);
+ assert_shared_dpll_disabled(dev_priv, pll);
+
+ pll->mode_set(dev_priv, pll);
+ }
}
/**
- * ironlake_enable_shared_dpll - enable PCH PLL
+ * intel_enable_shared_dpll - enable PCH PLL
* @dev_priv: i915 private structure
* @pipe: pipe PLL to enable
*
* The PCH PLL needs to be enabled before the PCH transcoder, since it
* drives the transcoder clock.
*/
-static void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
+static void intel_enable_shared_dpll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
- /* PCH PLLs only available on ILK, SNB and IVB */
- BUG_ON(INTEL_INFO(dev)->gen < 5);
if (WARN_ON(pll == NULL))
return;
/* If the pipe isn't enabled, we can't pump pixels and may hang */
assert_pipe_enabled(dev_priv, pipe);
- WARN(intel_crtc->primary_enabled, "Primary plane already enabled\n");
+ if (intel_crtc->primary_enabled)
+ return;
intel_crtc->primary_enabled = true;
reg = DSPCNTR(plane);
val = I915_READ(reg);
- if (val & DISPLAY_PLANE_ENABLE)
- return;
+ WARN_ON(val & DISPLAY_PLANE_ENABLE);
I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
intel_flush_primary_plane(dev_priv, plane);
int reg;
u32 val;
- WARN(!intel_crtc->primary_enabled, "Primary plane already disabled\n");
+ if (!intel_crtc->primary_enabled)
+ return;
intel_crtc->primary_enabled = false;
reg = DSPCNTR(plane);
val = I915_READ(reg);
- if ((val & DISPLAY_PLANE_ENABLE) == 0)
- return;
+ WARN_ON((val & DISPLAY_PLANE_ENABLE) == 0);
I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
intel_flush_primary_plane(dev_priv, plane);
* Failed to alloc the obj, check to see if we should share
* an fb with another CRTC instead
*/
- list_for_each_entry(c, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, c) {
i = to_intel_crtc(c);
if (c == &intel_crtc->base)
}
}
-static int i9xx_update_primary_plane(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int x, int y)
+static void i9xx_update_primary_plane(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int x, int y)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
} else
I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
POSTING_READ(reg);
-
- return 0;
}
-static int ironlake_update_primary_plane(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int x, int y)
+static void ironlake_update_primary_plane(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int x, int y)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(DSPLINOFF(plane), linear_offset);
}
POSTING_READ(reg);
-
- return 0;
}
/* Assume fb object is pinned & idle & fenced and just update base pointers */
dev_priv->display.disable_fbc(dev);
intel_increase_pllclock(crtc);
- return dev_priv->display.update_primary_plane(crtc, fb, x, y);
+ dev_priv->display.update_primary_plane(crtc, fb, x, y);
+
+ return 0;
}
void intel_display_handle_reset(struct drm_device *dev)
* pending_flip_queue really got woken up.
*/
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, crtc) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum plane plane = intel_crtc->plane;
intel_finish_page_flip_plane(dev, plane);
}
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, crtc) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
mutex_lock(&crtc->mutex);
intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
}
- ret = dev_priv->display.update_primary_plane(crtc, fb, x, y);
- if (ret) {
- mutex_lock(&dev->struct_mutex);
- intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
- mutex_unlock(&dev->struct_mutex);
- DRM_ERROR("failed to update base address\n");
- return ret;
- }
+ dev_priv->display.update_primary_plane(crtc, fb, x, y);
old_fb = crtc->primary->fb;
crtc->primary->fb = fb;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
u32 reg, temp, tries;
- /* FDI needs bits from pipe & plane first */
+ /* FDI needs bits from pipe first */
assert_pipe_enabled(dev_priv, pipe);
- assert_plane_enabled(dev_priv, plane);
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
for train result */
udelay(100);
/* Ironlake workaround, disable clock pointer after downing FDI */
- if (HAS_PCH_IBX(dev)) {
+ if (HAS_PCH_IBX(dev))
I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
- }
/* still set train pattern 1 */
reg = FDI_TX_CTL(pipe);
* cannot claim and pin a new fb without at least acquring the
* struct_mutex and so serialising with us.
*/
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ for_each_intel_crtc(dev, crtc) {
if (atomic_read(&crtc->unpin_work_count) == 0)
continue;
WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
- wait_event(dev_priv->pending_flip_queue,
- !intel_crtc_has_pending_flip(crtc));
+ WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue,
+ !intel_crtc_has_pending_flip(crtc),
+ 60*HZ) == 0);
mutex_lock(&dev->struct_mutex);
intel_finish_fb(crtc->primary->fb);
* Note that enable_shared_dpll tries to do the right thing, but
* get_shared_dpll unconditionally resets the pll - we need that to have
* the right LVDS enable sequence. */
- ironlake_enable_shared_dpll(intel_crtc);
+ intel_enable_shared_dpll(intel_crtc);
/* set transcoder timing, panel must allow it */
assert_panel_unlocked(dev_priv, pipe);
DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
crtc->base.base.id, pll->name);
+ WARN_ON(pll->refcount);
+
goto found;
}
return NULL;
found:
+ if (pll->refcount == 0)
+ pll->hw_state = crtc->config.dpll_hw_state;
+
crtc->config.shared_dpll = i;
DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
pipe_name(crtc->pipe));
- if (pll->active == 0) {
- memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
- sizeof(pll->hw_state));
-
- DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
- WARN_ON(pll->on);
- assert_shared_dpll_disabled(dev_priv, pll);
-
- pll->mode_set(dev_priv, pll);
- }
pll->refcount++;
return pll;
hsw_enable_ips(intel_crtc);
}
+static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
+{
+ if (!enable && intel_crtc->overlay) {
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ mutex_lock(&dev->struct_mutex);
+ dev_priv->mm.interruptible = false;
+ (void) intel_overlay_switch_off(intel_crtc->overlay);
+ dev_priv->mm.interruptible = true;
+ mutex_unlock(&dev->struct_mutex);
+ }
+
+ /* Let userspace switch the overlay on again. In most cases userspace
+ * has to recompute where to put it anyway.
+ */
+}
+
+/**
+ * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
+ * cursor plane briefly if not already running after enabling the display
+ * plane.
+ * This workaround avoids occasional blank screens when self refresh is
+ * enabled.
+ */
+static void
+g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ u32 cntl = I915_READ(CURCNTR(pipe));
+
+ if ((cntl & CURSOR_MODE) == 0) {
+ u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
+
+ I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
+ I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
+ intel_wait_for_vblank(dev_priv->dev, pipe);
+ I915_WRITE(CURCNTR(pipe), cntl);
+ I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
+ I915_WRITE(FW_BLC_SELF, fw_bcl_self);
+ }
+}
+
+static void intel_crtc_enable_planes(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+
+ intel_enable_primary_hw_plane(dev_priv, plane, pipe);
+ intel_enable_planes(crtc);
+ /* The fixup needs to happen before cursor is enabled */
+ if (IS_G4X(dev))
+ g4x_fixup_plane(dev_priv, pipe);
+ intel_crtc_update_cursor(crtc, true);
+ intel_crtc_dpms_overlay(intel_crtc, true);
+
+ hsw_enable_ips(intel_crtc);
+
+ mutex_lock(&dev->struct_mutex);
+ intel_update_fbc(dev);
+ intel_edp_psr_update(dev);
+ mutex_unlock(&dev->struct_mutex);
+}
+
+static void intel_crtc_disable_planes(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+
+ intel_crtc_wait_for_pending_flips(crtc);
+ drm_vblank_off(dev, pipe);
+
+ if (dev_priv->fbc.plane == plane)
+ intel_disable_fbc(dev);
+
+ hsw_disable_ips(intel_crtc);
+
+ intel_crtc_dpms_overlay(intel_crtc, false);
+ intel_crtc_update_cursor(crtc, false);
+ intel_disable_planes(crtc);
+ intel_disable_primary_hw_plane(dev_priv, plane, pipe);
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
+ enum plane plane = intel_crtc->plane;
WARN_ON(!crtc->enabled);
if (intel_crtc->active)
return;
+ if (intel_crtc->config.has_pch_encoder)
+ intel_prepare_shared_dpll(intel_crtc);
+
+ if (intel_crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(intel_crtc);
+
+ intel_set_pipe_timings(intel_crtc);
+
+ if (intel_crtc->config.has_pch_encoder) {
+ intel_cpu_transcoder_set_m_n(intel_crtc,
+ &intel_crtc->config.fdi_m_n);
+ }
+
+ ironlake_set_pipeconf(crtc);
+
+ /* Set up the display plane register */
+ I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
+ POSTING_READ(DSPCNTR(plane));
+
+ dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
+ crtc->x, crtc->y);
+
intel_crtc->active = true;
intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
- intel_enable_primary_hw_plane(dev_priv, plane, pipe);
- intel_enable_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
if (intel_crtc->config.has_pch_encoder)
ironlake_pch_enable(crtc);
- mutex_lock(&dev->struct_mutex);
- intel_update_fbc(dev);
- mutex_unlock(&dev->struct_mutex);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
if (HAS_PCH_CPT(dev))
cpt_verify_modeset(dev, intel_crtc->pipe);
+ intel_crtc_enable_planes(crtc);
+
/*
* There seems to be a race in PCH platform hw (at least on some
* outputs) where an enabled pipe still completes any pageflip right
return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
}
-static void haswell_crtc_enable_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
-
- intel_enable_primary_hw_plane(dev_priv, plane, pipe);
- intel_enable_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
-
- hsw_enable_ips(intel_crtc);
-
- mutex_lock(&dev->struct_mutex);
- intel_update_fbc(dev);
- mutex_unlock(&dev->struct_mutex);
-}
-
-static void haswell_crtc_disable_planes(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
-
- intel_crtc_wait_for_pending_flips(crtc);
- drm_vblank_off(dev, pipe);
-
- /* FBC must be disabled before disabling the plane on HSW. */
- if (dev_priv->fbc.plane == plane)
- intel_disable_fbc(dev);
-
- hsw_disable_ips(intel_crtc);
-
- intel_crtc_update_cursor(crtc, false);
- intel_disable_planes(crtc);
- intel_disable_primary_hw_plane(dev_priv, plane, pipe);
-}
-
/*
* This implements the workaround described in the "notes" section of the mode
* set sequence documentation. When going from no pipes or single pipe to
/* We want to get the other_active_crtc only if there's only 1 other
* active crtc. */
- list_for_each_entry(crtc_it, &dev->mode_config.crtc_list, base.head) {
+ for_each_intel_crtc(dev, crtc_it) {
if (!crtc_it->active || crtc_it == crtc)
continue;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
+ enum plane plane = intel_crtc->plane;
WARN_ON(!crtc->enabled);
if (intel_crtc->active)
return;
+ if (intel_crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(intel_crtc);
+
+ intel_set_pipe_timings(intel_crtc);
+
+ if (intel_crtc->config.has_pch_encoder) {
+ intel_cpu_transcoder_set_m_n(intel_crtc,
+ &intel_crtc->config.fdi_m_n);
+ }
+
+ haswell_set_pipeconf(crtc);
+
+ intel_set_pipe_csc(crtc);
+
+ /* Set up the display plane register */
+ I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
+ POSTING_READ(DSPCNTR(plane));
+
+ dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
+ crtc->x, crtc->y);
+
intel_crtc->active = true;
intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
/* If we change the relative order between pipe/planes enabling, we need
* to change the workaround. */
haswell_mode_set_planes_workaround(intel_crtc);
- haswell_crtc_enable_planes(crtc);
+ intel_crtc_enable_planes(crtc);
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
u32 reg, temp;
-
if (!intel_crtc->active)
return;
+ intel_crtc_disable_planes(crtc);
+
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
- intel_crtc_wait_for_pending_flips(crtc);
- drm_vblank_off(dev, pipe);
-
- if (dev_priv->fbc.plane == plane)
- intel_disable_fbc(dev);
-
- intel_crtc_update_cursor(crtc, false);
- intel_disable_planes(crtc);
- intel_disable_primary_hw_plane(dev_priv, plane, pipe);
-
if (intel_crtc->config.has_pch_encoder)
intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
+ intel_edp_psr_update(dev);
mutex_unlock(&dev->struct_mutex);
}
if (!intel_crtc->active)
return;
- haswell_crtc_disable_planes(crtc);
+ intel_crtc_disable_planes(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder) {
intel_opregion_notify_encoder(encoder, false);
mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
+ intel_edp_psr_update(dev);
mutex_unlock(&dev->struct_mutex);
}
intel_ddi_put_crtc_pll(crtc);
}
-static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
-{
- if (!enable && intel_crtc->overlay) {
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- mutex_lock(&dev->struct_mutex);
- dev_priv->mm.interruptible = false;
- (void) intel_overlay_switch_off(intel_crtc->overlay);
- dev_priv->mm.interruptible = true;
- mutex_unlock(&dev->struct_mutex);
- }
-
- /* Let userspace switch the overlay on again. In most cases userspace
- * has to recompute where to put it anyway.
- */
-}
-
-/**
- * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
- * cursor plane briefly if not already running after enabling the display
- * plane.
- * This workaround avoids occasional blank screens when self refresh is
- * enabled.
- */
-static void
-g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
- u32 cntl = I915_READ(CURCNTR(pipe));
-
- if ((cntl & CURSOR_MODE) == 0) {
- u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
-
- I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
- I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
- intel_wait_for_vblank(dev_priv->dev, pipe);
- I915_WRITE(CURCNTR(pipe), cntl);
- I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
- I915_WRITE(FW_BLC_SELF, fw_bcl_self);
- }
-}
-
static void i9xx_pfit_enable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
* First get all needed power domains, then put all unneeded, to avoid
* any unnecessary toggling of the power wells.
*/
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ for_each_intel_crtc(dev, crtc) {
enum intel_display_power_domain domain;
if (!crtc->base.enabled)
intel_display_power_get(dev_priv, domain);
}
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ for_each_intel_crtc(dev, crtc) {
enum intel_display_power_domain domain;
for_each_power_domain(domain, crtc->enabled_power_domains)
struct intel_crtc *intel_crtc;
int max_pixclk = 0;
- list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, intel_crtc) {
if (intel_crtc->new_enabled)
max_pixclk = max(max_pixclk,
intel_crtc->new_config->adjusted_mode.crtc_clock);
return;
/* disable/enable all currently active pipes while we change cdclk */
- list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
- base.head)
+ for_each_intel_crtc(dev, intel_crtc)
if (intel_crtc->base.enabled)
*prepare_pipes |= (1 << intel_crtc->pipe);
}
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
bool is_dsi;
+ u32 dspcntr;
WARN_ON(!crtc->enabled);
if (intel_crtc->active)
return;
+ vlv_prepare_pll(intel_crtc);
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ if (intel_crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(intel_crtc);
+
+ intel_set_pipe_timings(intel_crtc);
+
+ /* pipesrc and dspsize control the size that is scaled from,
+ * which should always be the user's requested size.
+ */
+ I915_WRITE(DSPSIZE(plane),
+ ((intel_crtc->config.pipe_src_h - 1) << 16) |
+ (intel_crtc->config.pipe_src_w - 1));
+ I915_WRITE(DSPPOS(plane), 0);
+
+ i9xx_set_pipeconf(intel_crtc);
+
+ I915_WRITE(DSPCNTR(plane), dspcntr);
+ POSTING_READ(DSPCNTR(plane));
+
+ dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
+ crtc->x, crtc->y);
+
intel_crtc->active = true;
for_each_encoder_on_crtc(dev, crtc, encoder)
is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
- if (!is_dsi)
- vlv_enable_pll(intel_crtc);
+ if (!is_dsi) {
+ if (IS_CHERRYVIEW(dev))
+ chv_enable_pll(intel_crtc);
+ else
+ vlv_enable_pll(intel_crtc);
+ }
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_enable)
intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
- intel_wait_for_vblank(dev_priv->dev, pipe);
intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
- intel_enable_primary_hw_plane(dev_priv, plane, pipe);
- intel_enable_planes(crtc);
- intel_crtc_update_cursor(crtc, true);
-
- intel_update_fbc(dev);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
+
+ intel_crtc_enable_planes(crtc);
+}
+
+static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ I915_WRITE(FP0(crtc->pipe), crtc->config.dpll_hw_state.fp0);
+ I915_WRITE(FP1(crtc->pipe), crtc->config.dpll_hw_state.fp1);
}
static void i9xx_crtc_enable(struct drm_crtc *crtc)
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
+ u32 dspcntr;
WARN_ON(!crtc->enabled);
if (intel_crtc->active)
return;
+ i9xx_set_pll_dividers(intel_crtc);
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ if (pipe == 0)
+ dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ if (intel_crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(intel_crtc);
+
+ intel_set_pipe_timings(intel_crtc);
+
+ /* pipesrc and dspsize control the size that is scaled from,
+ * which should always be the user's requested size.
+ */
+ I915_WRITE(DSPSIZE(plane),
+ ((intel_crtc->config.pipe_src_h - 1) << 16) |
+ (intel_crtc->config.pipe_src_w - 1));
+ I915_WRITE(DSPPOS(plane), 0);
+
+ i9xx_set_pipeconf(intel_crtc);
+
+ I915_WRITE(DSPCNTR(plane), dspcntr);
+ POSTING_READ(DSPCNTR(plane));
+
+ dev_priv->display.update_primary_plane(crtc, crtc->primary->fb,
+ crtc->x, crtc->y);
+
intel_crtc->active = true;
for_each_encoder_on_crtc(dev, crtc, encoder)
intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
- intel_wait_for_vblank(dev_priv->dev, pipe);
intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
- intel_enable_primary_hw_plane(dev_priv, plane, pipe);
- intel_enable_planes(crtc);
- /* The fixup needs to happen before cursor is enabled */
- if (IS_G4X(dev))
- g4x_fixup_plane(dev_priv, pipe);
- intel_crtc_update_cursor(crtc, true);
-
- /* Give the overlay scaler a chance to enable if it's on this pipe */
- intel_crtc_dpms_overlay(intel_crtc, true);
-
- intel_update_fbc(dev);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->enable(encoder);
+
+ intel_crtc_enable_planes(crtc);
}
static void i9xx_pfit_disable(struct intel_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
if (!intel_crtc->active)
return;
+ intel_crtc_disable_planes(crtc);
+
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
- /* Give the overlay scaler a chance to disable if it's on this pipe */
- intel_crtc_wait_for_pending_flips(crtc);
- drm_vblank_off(dev, pipe);
-
- if (dev_priv->fbc.plane == plane)
- intel_disable_fbc(dev);
-
- intel_crtc_dpms_overlay(intel_crtc, false);
- intel_crtc_update_cursor(crtc, false);
- intel_disable_planes(crtc);
- intel_disable_primary_hw_plane(dev_priv, plane, pipe);
-
intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
intel_disable_pipe(dev_priv, pipe);
if (encoder->post_disable)
encoder->post_disable(encoder);
- if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
- vlv_disable_pll(dev_priv, pipe);
- else if (!IS_VALLEYVIEW(dev))
- i9xx_disable_pll(dev_priv, pipe);
+ if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) {
+ if (IS_CHERRYVIEW(dev))
+ chv_disable_pll(dev_priv, pipe);
+ else if (IS_VALLEYVIEW(dev))
+ vlv_disable_pll(dev_priv, pipe);
+ else
+ i9xx_disable_pll(dev_priv, pipe);
+ }
intel_crtc->active = false;
intel_update_watermarks(crtc);
+ mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
+ intel_edp_psr_update(dev);
+ mutex_unlock(&dev->struct_mutex);
}
static void i9xx_crtc_off(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct drm_connector *connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
/* crtc should still be enabled when we disable it. */
WARN_ON(!crtc->enabled);
dev_priv->display.crtc_disable(crtc);
- intel_crtc->eld_vld = false;
intel_crtc_update_sarea(crtc, false);
dev_priv->display.off(crtc);
intel_clock_t *reduced_clock)
{
struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
u32 fp, fp2 = 0;
if (IS_PINEVIEW(dev)) {
fp2 = i9xx_dpll_compute_fp(reduced_clock);
}
- I915_WRITE(FP0(pipe), fp);
crtc->config.dpll_hw_state.fp0 = fp;
crtc->lowfreq_avail = false;
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
reduced_clock && i915.powersave) {
- I915_WRITE(FP1(pipe), fp2);
crtc->config.dpll_hw_state.fp1 = fp2;
crtc->lowfreq_avail = true;
} else {
- I915_WRITE(FP1(pipe), fp);
crtc->config.dpll_hw_state.fp1 = fp;
}
}
}
static void vlv_update_pll(struct intel_crtc *crtc)
+{
+ u32 dpll, dpll_md;
+
+ /*
+ * Enable DPIO clock input. We should never disable the reference
+ * clock for pipe B, since VGA hotplug / manual detection depends
+ * on it.
+ */
+ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
+ DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
+ /* We should never disable this, set it here for state tracking */
+ if (crtc->pipe == PIPE_B)
+ dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+ dpll |= DPLL_VCO_ENABLE;
+ crtc->config.dpll_hw_state.dpll = dpll;
+
+ dpll_md = (crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ crtc->config.dpll_hw_state.dpll_md = dpll_md;
+}
+
+static void vlv_prepare_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe = crtc->pipe;
- u32 dpll, mdiv;
+ u32 mdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
- u32 coreclk, reg_val, dpll_md;
+ u32 coreclk, reg_val;
mutex_lock(&dev_priv->dpio_lock);
/* See eDP HDMI DPIO driver vbios notes doc */
/* PLL B needs special handling */
- if (pipe)
+ if (pipe == PIPE_B)
vlv_pllb_recal_opamp(dev_priv, pipe);
/* Set up Tx target for periodic Rcomp update */
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
/* Use SSC source */
- if (!pipe)
+ if (pipe == PIPE_A)
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
0x0df40000);
else
0x0df70000);
} else { /* HDMI or VGA */
/* Use bend source */
- if (!pipe)
+ if (pipe == PIPE_A)
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
0x0df70000);
else
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
+static void chv_update_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ int dpll_reg = DPLL(crtc->pipe);
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ u32 loopfilter, intcoeff;
+ u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
+ int refclk;
+
+ crtc->config.dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
+ DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
+ DPLL_VCO_ENABLE;
+ if (pipe != PIPE_A)
+ crtc->config.dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
+ crtc->config.dpll_hw_state.dpll_md =
+ (crtc->config.pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+
+ bestn = crtc->config.dpll.n;
+ bestm2_frac = crtc->config.dpll.m2 & 0x3fffff;
+ bestm1 = crtc->config.dpll.m1;
+ bestm2 = crtc->config.dpll.m2 >> 22;
+ bestp1 = crtc->config.dpll.p1;
+ bestp2 = crtc->config.dpll.p2;
/*
- * Enable DPIO clock input. We should never disable the reference
- * clock for pipe B, since VGA hotplug / manual detection depends
- * on it.
+ * Enable Refclk and SSC
*/
- dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
- DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
- /* We should never disable this, set it here for state tracking */
- if (pipe == PIPE_B)
- dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
- dpll |= DPLL_VCO_ENABLE;
- crtc->config.dpll_hw_state.dpll = dpll;
+ I915_WRITE(dpll_reg,
+ crtc->config.dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
- dpll_md = (crtc->config.pixel_multiplier - 1)
- << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- crtc->config.dpll_hw_state.dpll_md = dpll_md;
+ mutex_lock(&dev_priv->dpio_lock);
+
+ /* p1 and p2 divider */
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
+ 5 << DPIO_CHV_S1_DIV_SHIFT |
+ bestp1 << DPIO_CHV_P1_DIV_SHIFT |
+ bestp2 << DPIO_CHV_P2_DIV_SHIFT |
+ 1 << DPIO_CHV_K_DIV_SHIFT);
+
+ /* Feedback post-divider - m2 */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
+
+ /* Feedback refclk divider - n and m1 */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
+ DPIO_CHV_M1_DIV_BY_2 |
+ 1 << DPIO_CHV_N_DIV_SHIFT);
+
+ /* M2 fraction division */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+
+ /* M2 fraction division enable */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
+ DPIO_CHV_FRAC_DIV_EN |
+ (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT));
+
+ /* Loop filter */
+ refclk = i9xx_get_refclk(&crtc->base, 0);
+ loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT |
+ 2 << DPIO_CHV_GAIN_CTRL_SHIFT;
+ if (refclk == 100000)
+ intcoeff = 11;
+ else if (refclk == 38400)
+ intcoeff = 10;
+ else
+ intcoeff = 9;
+ loopfilter |= intcoeff << DPIO_CHV_INT_COEFF_SHIFT;
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
+
+ /* AFC Recal */
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
+ vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
+ DPIO_AFC_RECAL);
mutex_unlock(&dev_priv->dpio_lock);
}
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dspcntr;
bool ok, has_reduced_clock = false;
bool is_lvds = false, is_dsi = false;
struct intel_encoder *encoder;
const intel_limit_t *limit;
- int ret;
for_each_encoder_on_crtc(dev, crtc, encoder) {
switch (encoder->type) {
}
if (is_dsi)
- goto skip_dpll;
+ return 0;
if (!intel_crtc->config.clock_set) {
refclk = i9xx_get_refclk(crtc, num_connectors);
i8xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
+ } else if (IS_CHERRYVIEW(dev)) {
+ chv_update_pll(intel_crtc);
} else if (IS_VALLEYVIEW(dev)) {
vlv_update_pll(intel_crtc);
} else {
i9xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
- }
-
-skip_dpll:
- /* Set up the display plane register */
- dspcntr = DISPPLANE_GAMMA_ENABLE;
-
- if (!IS_VALLEYVIEW(dev)) {
- if (pipe == 0)
- dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
- else
- dspcntr |= DISPPLANE_SEL_PIPE_B;
+ num_connectors);
}
- if (intel_crtc->config.has_dp_encoder)
- intel_dp_set_m_n(intel_crtc);
-
- intel_set_pipe_timings(intel_crtc);
-
- /* pipesrc and dspsize control the size that is scaled from,
- * which should always be the user's requested size.
- */
- I915_WRITE(DSPSIZE(plane),
- ((intel_crtc->config.pipe_src_h - 1) << 16) |
- (intel_crtc->config.pipe_src_w - 1));
- I915_WRITE(DSPPOS(plane), 0);
-
- i9xx_set_pipeconf(intel_crtc);
-
- I915_WRITE(DSPCNTR(plane), dspcntr);
- POSTING_READ(DSPCNTR(plane));
-
- ret = intel_pipe_set_base(crtc, x, y, fb);
-
- return ret;
+ return 0;
}
static void i9xx_get_pfit_config(struct intel_crtc *crtc,
}
+static void chv_crtc_clock_get(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = pipe_config->cpu_transcoder;
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ intel_clock_t clock;
+ u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
+ int refclk = 100000;
+
+ mutex_lock(&dev_priv->dpio_lock);
+ cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
+ pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
+ pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
+ pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
+ clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
+ clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
+ clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
+ clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
+
+ chv_clock(refclk, &clock);
+
+ /* clock.dot is the fast clock */
+ pipe_config->port_clock = clock.dot / 5;
+}
+
static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
struct intel_crtc_config *pipe_config)
{
}
}
+ if (IS_VALLEYVIEW(dev) && (tmp & PIPECONF_COLOR_RANGE_SELECT))
+ pipe_config->limited_color_range = true;
+
if (INTEL_INFO(dev)->gen < 4)
pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
DPLL_PORTB_READY_MASK);
}
- if (IS_VALLEYVIEW(dev))
+ if (IS_CHERRYVIEW(dev))
+ chv_crtc_clock_get(crtc, pipe_config);
+ else if (IS_VALLEYVIEW(dev))
vlv_crtc_clock_get(crtc, pipe_config);
else
i9xx_crtc_clock_get(crtc, pipe_config);
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
DRM_DEBUG_KMS("Using SSC on eDP\n");
val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
- }
- else
+ } else
val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
} else
val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
int num_connectors = 0;
intel_clock_t clock, reduced_clock;
u32 dpll = 0, fp = 0, fp2 = 0;
bool is_lvds = false;
struct intel_encoder *encoder;
struct intel_shared_dpll *pll;
- int ret;
for_each_encoder_on_crtc(dev, crtc, encoder) {
switch (encoder->type) {
pll = intel_get_shared_dpll(intel_crtc);
if (pll == NULL) {
DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
- pipe_name(pipe));
+ pipe_name(intel_crtc->pipe));
return -EINVAL;
}
} else
intel_put_shared_dpll(intel_crtc);
- if (intel_crtc->config.has_dp_encoder)
- intel_dp_set_m_n(intel_crtc);
-
if (is_lvds && has_reduced_clock && i915.powersave)
intel_crtc->lowfreq_avail = true;
else
intel_crtc->lowfreq_avail = false;
- intel_set_pipe_timings(intel_crtc);
-
- if (intel_crtc->config.has_pch_encoder) {
- intel_cpu_transcoder_set_m_n(intel_crtc,
- &intel_crtc->config.fdi_m_n);
- }
-
- ironlake_set_pipeconf(crtc);
-
- /* Set up the display plane register */
- I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
- POSTING_READ(DSPCNTR(plane));
-
- ret = intel_pipe_set_base(crtc, x, y, fb);
-
- return ret;
+ return 0;
}
static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
break;
}
+ if (tmp & PIPECONF_COLOR_RANGE_SELECT)
+ pipe_config->limited_color_range = true;
+
if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
struct intel_shared_dpll *pll;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
struct intel_crtc *crtc;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
+ for_each_intel_crtc(dev, crtc)
WARN(crtc->active, "CRTC for pipe %c enabled\n",
pipe_name(crtc->pipe));
}
lpt_disable_clkout_dp(dev);
- intel_runtime_pm_disable_interrupts(dev);
hsw_disable_lcpll(dev_priv, true, true);
}
DRM_DEBUG_KMS("Disabling package C8+\n");
hsw_restore_lcpll(dev_priv);
- intel_runtime_pm_restore_interrupts(dev);
lpt_init_pch_refclk(dev);
if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
}
intel_prepare_ddi(dev);
- i915_gem_init_swizzling(dev);
- mutex_lock(&dev_priv->rps.hw_lock);
- gen6_update_ring_freq(dev);
- mutex_unlock(&dev_priv->rps.hw_lock);
}
static void snb_modeset_global_resources(struct drm_device *dev)
int x, int y,
struct drm_framebuffer *fb)
{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int plane = intel_crtc->plane;
- int ret;
if (!intel_ddi_pll_select(intel_crtc))
return -EINVAL;
intel_ddi_pll_enable(intel_crtc);
- if (intel_crtc->config.has_dp_encoder)
- intel_dp_set_m_n(intel_crtc);
-
intel_crtc->lowfreq_avail = false;
- intel_set_pipe_timings(intel_crtc);
-
- if (intel_crtc->config.has_pch_encoder) {
- intel_cpu_transcoder_set_m_n(intel_crtc,
- &intel_crtc->config.fdi_m_n);
- }
-
- haswell_set_pipeconf(crtc);
-
- intel_set_pipe_csc(crtc);
-
- /* Set up the display plane register */
- I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
- POSTING_READ(DSPCNTR(plane));
-
- ret = intel_pipe_set_base(crtc, x, y, fb);
-
- return ret;
+ return 0;
}
static bool haswell_get_pipe_config(struct intel_crtc *crtc,
return true;
}
-static int intel_crtc_mode_set(struct drm_crtc *crtc,
- int x, int y,
- struct drm_framebuffer *fb)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_encoder *encoder;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
- int pipe = intel_crtc->pipe;
- int ret;
-
- drm_vblank_pre_modeset(dev, pipe);
-
- ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
-
- drm_vblank_post_modeset(dev, pipe);
-
- if (ret != 0)
- return ret;
-
- for_each_encoder_on_crtc(dev, crtc, encoder) {
- DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
- encoder->base.base.id,
- drm_get_encoder_name(&encoder->base),
- mode->base.id, mode->name);
- encoder->mode_set(encoder);
- }
-
- return 0;
-}
-
static struct {
int clock;
u32 config;
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
uint8_t *eld = connector->eld;
- struct drm_device *dev = crtc->dev;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t eldv;
uint32_t i;
int len;
tmp = I915_READ(aud_cntrl_st2);
tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
I915_WRITE(aud_cntrl_st2, tmp);
+ POSTING_READ(aud_cntrl_st2);
- /* Wait for 1 vertical blank */
- intel_wait_for_vblank(dev, pipe);
+ assert_pipe_disabled(dev_priv, to_intel_crtc(crtc)->pipe);
/* Set ELD valid state */
tmp = I915_READ(aud_cntrl_st2);
DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
eldv = AUDIO_ELD_VALID_A << (pipe * 4);
- intel_crtc->eld_vld = true;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
if (intel_crtc->cursor_visible != visible) {
int16_t width = intel_crtc->cursor_width;
- uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+ uint32_t cntl = I915_READ(CURCNTR(pipe));
if (base) {
cntl &= ~CURSOR_MODE;
cntl |= MCURSOR_GAMMA_ENABLE;
cntl |= CURSOR_PIPE_CSC_ENABLE;
cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
}
- I915_WRITE(CURCNTR_IVB(pipe), cntl);
+ I915_WRITE(CURCNTR(pipe), cntl);
intel_crtc->cursor_visible = visible;
}
/* and commit changes on next vblank */
- POSTING_READ(CURCNTR_IVB(pipe));
- I915_WRITE(CURBASE_IVB(pipe), base);
- POSTING_READ(CURBASE_IVB(pipe));
+ POSTING_READ(CURCNTR(pipe));
+ I915_WRITE(CURBASE(pipe), base);
+ POSTING_READ(CURBASE(pipe));
}
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
if (!visible && !intel_crtc->cursor_visible)
return;
- if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
- I915_WRITE(CURPOS_IVB(pipe), pos);
+ I915_WRITE(CURPOS(pipe), pos);
+
+ if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev))
ivb_update_cursor(crtc, base);
- } else {
- I915_WRITE(CURPOS(pipe), pos);
- if (IS_845G(dev) || IS_I865G(dev))
- i845_update_cursor(crtc, base);
- else
- i9xx_update_cursor(crtc, base);
- }
+ else if (IS_845G(dev) || IS_I865G(dev))
+ i845_update_cursor(crtc, base);
+ else
+ i9xx_update_cursor(crtc, base);
}
static int intel_crtc_cursor_set(struct drm_crtc *crtc,
}
/* Find an unused one (if possible) */
- list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, possible_crtc) {
i++;
if (!(encoder->possible_crtcs & (1 << i)))
continue;
if (!i915.powersave)
goto out;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, crtc) {
if (!crtc->primary->fb)
continue;
if (!i915.powersave)
return;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, crtc) {
if (!crtc->primary->fb)
continue;
do_intel_finish_page_flip(dev, crtc);
}
+/* Is 'a' after or equal to 'b'? */
+static bool g4x_flip_count_after_eq(u32 a, u32 b)
+{
+ return !((a - b) & 0x80000000);
+}
+
+static bool page_flip_finished(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /*
+ * The relevant registers doen't exist on pre-ctg.
+ * As the flip done interrupt doesn't trigger for mmio
+ * flips on gmch platforms, a flip count check isn't
+ * really needed there. But since ctg has the registers,
+ * include it in the check anyway.
+ */
+ if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
+ return true;
+
+ /*
+ * A DSPSURFLIVE check isn't enough in case the mmio and CS flips
+ * used the same base address. In that case the mmio flip might
+ * have completed, but the CS hasn't even executed the flip yet.
+ *
+ * A flip count check isn't enough as the CS might have updated
+ * the base address just after start of vblank, but before we
+ * managed to process the interrupt. This means we'd complete the
+ * CS flip too soon.
+ *
+ * Combining both checks should get us a good enough result. It may
+ * still happen that the CS flip has been executed, but has not
+ * yet actually completed. But in case the base address is the same
+ * anyway, we don't really care.
+ */
+ return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
+ crtc->unpin_work->gtt_offset &&
+ g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_GM45(crtc->pipe)),
+ crtc->unpin_work->flip_count);
+}
+
void intel_prepare_page_flip(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
* is also accompanied by a spurious intel_prepare_page_flip().
*/
spin_lock_irqsave(&dev->event_lock, flags);
- if (intel_crtc->unpin_work)
+ if (intel_crtc->unpin_work && page_flip_finished(intel_crtc))
atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
-inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
+static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
{
/* Ensure that the work item is consistent when activating it ... */
smp_wmb();
if (ret)
goto err;
+ intel_crtc->unpin_work->gtt_offset =
+ i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
ret = intel_ring_begin(ring, 6);
if (ret)
goto err_unpin;
intel_ring_emit(ring, MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(ring, fb->pitches[0]);
- intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
intel_ring_emit(ring, 0); /* aux display base address, unused */
intel_mark_page_flip_active(intel_crtc);
if (ret)
goto err;
+ intel_crtc->unpin_work->gtt_offset =
+ i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
ret = intel_ring_begin(ring, 6);
if (ret)
goto err_unpin;
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(ring, fb->pitches[0]);
- intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
intel_ring_emit(ring, MI_NOOP);
intel_mark_page_flip_active(intel_crtc);
if (ret)
goto err;
+ intel_crtc->unpin_work->gtt_offset =
+ i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
ret = intel_ring_begin(ring, 4);
if (ret)
goto err_unpin;
intel_ring_emit(ring, MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(ring, fb->pitches[0]);
- intel_ring_emit(ring,
- (i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset) |
+ intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset |
obj->tiling_mode);
/* XXX Enabling the panel-fitter across page-flip is so far
if (ret)
goto err;
+ intel_crtc->unpin_work->gtt_offset =
+ i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
ret = intel_ring_begin(ring, 4);
if (ret)
goto err_unpin;
intel_ring_emit(ring, MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
- intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
/* Contrary to the suggestions in the documentation,
* "Enable Panel Fitter" does not seem to be required when page
if (ret)
goto err;
- switch(intel_crtc->plane) {
+ intel_crtc->unpin_work->gtt_offset =
+ i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
+ switch (intel_crtc->plane) {
case PLANE_A:
plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
break;
intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
- intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
intel_ring_emit(ring, (MI_NOOP));
intel_mark_page_flip_active(intel_crtc);
atomic_inc(&intel_crtc->unpin_work_count);
intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
+ if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
+ work->flip_count = I915_READ(PIPE_FLIPCOUNT_GM45(intel_crtc->pipe)) + 1;
+
ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags);
if (ret)
goto cleanup_pending;
to_intel_crtc(encoder->base.crtc);
}
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
crtc->new_enabled = crtc->base.enabled;
if (crtc->new_enabled)
encoder->base.crtc = &encoder->new_crtc->base;
}
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
crtc->base.enabled = crtc->new_enabled;
}
}
static void
-connected_sink_compute_bpp(struct intel_connector * connector,
+connected_sink_compute_bpp(struct intel_connector *connector,
struct intel_crtc_config *pipe_config)
{
int bpp = pipe_config->pipe_bpp;
}
/* Check for pipes that will be enabled/disabled ... */
- list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, intel_crtc) {
if (intel_crtc->base.enabled == intel_crtc->new_enabled)
continue;
intel_modeset_commit_output_state(dev);
/* Double check state. */
- list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, intel_crtc) {
WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base));
WARN_ON(intel_crtc->new_config &&
intel_crtc->new_config != &intel_crtc->config);
PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
PIPE_CONF_CHECK_I(pixel_multiplier);
+ PIPE_CONF_CHECK_I(has_hdmi_sink);
+ if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
+ IS_VALLEYVIEW(dev))
+ PIPE_CONF_CHECK_I(limited_color_range);
+
+ PIPE_CONF_CHECK_I(has_audio);
PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
DRM_MODE_FLAG_INTERLACE);
PIPE_CONF_CHECK_I(pipe_src_w);
PIPE_CONF_CHECK_I(pipe_src_h);
- PIPE_CONF_CHECK_I(gmch_pfit.control);
- /* pfit ratios are autocomputed by the hw on gen4+ */
- if (INTEL_INFO(dev)->gen < 4)
- PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
- PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+ /*
+ * FIXME: BIOS likes to set up a cloned config with lvds+external
+ * screen. Since we don't yet re-compute the pipe config when moving
+ * just the lvds port away to another pipe the sw tracking won't match.
+ *
+ * Proper atomic modesets with recomputed global state will fix this.
+ * Until then just don't check gmch state for inherited modes.
+ */
+ if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) {
+ PIPE_CONF_CHECK_I(gmch_pfit.control);
+ /* pfit ratios are autocomputed by the hw on gen4+ */
+ if (INTEL_INFO(dev)->gen < 4)
+ PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
+ PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+ }
+
PIPE_CONF_CHECK_I(pch_pfit.enabled);
if (current_config->pch_pfit.enabled) {
PIPE_CONF_CHECK_I(pch_pfit.pos);
struct intel_encoder *encoder;
struct intel_crtc_config pipe_config;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
bool enabled = false;
bool active = false;
"pll on state mismatch (expected %i, found %i)\n",
pll->on, active);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll)
enabled_crtcs++;
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
* on the DPLL.
*/
for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
- ret = intel_crtc_mode_set(&intel_crtc->base,
- x, y, fb);
+ struct drm_framebuffer *old_fb;
+
+ mutex_lock(&dev->struct_mutex);
+ ret = intel_pin_and_fence_fb_obj(dev,
+ to_intel_framebuffer(fb)->obj,
+ NULL);
+ if (ret != 0) {
+ DRM_ERROR("pin & fence failed\n");
+ mutex_unlock(&dev->struct_mutex);
+ goto done;
+ }
+ old_fb = crtc->primary->fb;
+ if (old_fb)
+ intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
+ mutex_unlock(&dev->struct_mutex);
+
+ crtc->primary->fb = fb;
+ crtc->x = x;
+ crtc->y = y;
+
+ ret = dev_priv->display.crtc_mode_set(&intel_crtc->base,
+ x, y, fb);
if (ret)
goto done;
}
* restored, not the drivers personal bookkeeping.
*/
count = 0;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, crtc) {
config->save_crtc_enabled[count++] = crtc->enabled;
}
int count;
count = 0;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ for_each_intel_crtc(dev, crtc) {
crtc->new_enabled = config->save_crtc_enabled[count++];
if (crtc->new_enabled)
}
/* Now we've also updated encoder->new_crtc for all encoders. */
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
crtc->new_enabled = false;
list_for_each_entry(encoder,
struct intel_crtc *crtc;
/* Make sure no transcoder isn't still depending on us. */
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ for_each_intel_crtc(dev, crtc) {
if (intel_crtc_to_shared_dpll(crtc) == pll)
assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
}
intel_crtc->plane = !pipe;
}
+ init_waitqueue_head(&intel_crtc->vbl_wait);
+
BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
intel_lvds_init(dev);
- if (!IS_ULT(dev))
+ if (!IS_ULT(dev) && !IS_CHERRYVIEW(dev))
intel_crt_init(dev);
if (HAS_DDI(dev)) {
intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
}
+ if (IS_CHERRYVIEW(dev)) {
+ if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED) {
+ intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID,
+ PORT_D);
+ if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
+ intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
+ }
+ }
+
intel_dsi_init(dev);
} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
bool found = false;
if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
dev_priv->display.find_dpll = g4x_find_best_dpll;
+ else if (IS_CHERRYVIEW(dev))
+ dev_priv->display.find_dpll = chv_find_best_dpll;
else if (IS_VALLEYVIEW(dev))
dev_priv->display.find_dpll = vlv_find_best_dpll;
else if (IS_PINEVIEW(dev))
intel_reset_dpio(dev);
- mutex_lock(&dev->struct_mutex);
intel_enable_gt_powersave(dev);
- mutex_unlock(&dev->struct_mutex);
}
void intel_modeset_suspend_hw(struct drm_device *dev)
intel_modeset_setup_hw_state(dev, false);
mutex_unlock(&dev->mode_config.mutex);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
if (!crtc->active)
continue;
i915_redisable_vga_power_on(dev);
}
+static bool primary_get_hw_state(struct intel_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+
+ if (!crtc->active)
+ return false;
+
+ return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE;
+}
+
static void intel_modeset_readout_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_connector *connector;
int i;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
memset(&crtc->config, 0, sizeof(crtc->config));
+ crtc->config.quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
+
crtc->active = dev_priv->display.get_pipe_config(crtc,
&crtc->config);
crtc->base.enabled = crtc->active;
- crtc->primary_enabled = crtc->active;
+ crtc->primary_enabled = primary_get_hw_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state);
pll->active = 0;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
pll->active++;
}
* Note that this could go away if we move to using crtc_config
* checking everywhere.
*/
- list_for_each_entry(crtc, &dev->mode_config.crtc_list,
- base.head) {
+ for_each_intel_crtc(dev, crtc) {
if (crtc->active && i915.fastboot) {
intel_mode_from_pipe_config(&crtc->base.mode, &crtc->config);
DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
* for this.
*/
mutex_lock(&dev->struct_mutex);
- list_for_each_entry(c, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, c) {
if (!c->primary->fb)
continue;
intel_unregister_dsm_handler();
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ for_each_crtc(dev, crtc) {
/* Skip inactive CRTCs */
if (!crtc->primary->fb)
continue;
struct intel_pipe_error_state {
bool power_domain_on;
u32 source;
+ u32 stat;
} pipe[I915_MAX_PIPES];
struct intel_plane_error_state {
if (!error->pipe[i].power_domain_on)
continue;
- if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
- error->cursor[i].control = I915_READ(CURCNTR(i));
- error->cursor[i].position = I915_READ(CURPOS(i));
- error->cursor[i].base = I915_READ(CURBASE(i));
- } else {
- error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
- error->cursor[i].position = I915_READ(CURPOS_IVB(i));
- error->cursor[i].base = I915_READ(CURBASE_IVB(i));
- }
+ error->cursor[i].control = I915_READ(CURCNTR(i));
+ error->cursor[i].position = I915_READ(CURPOS(i));
+ error->cursor[i].base = I915_READ(CURBASE(i));
error->plane[i].control = I915_READ(DSPCNTR(i));
error->plane[i].stride = I915_READ(DSPSTRIDE(i));
}
error->pipe[i].source = I915_READ(PIPESRC(i));
+
+ if (!HAS_PCH_SPLIT(dev))
+ error->pipe[i].stat = I915_READ(PIPESTAT(i));
}
error->num_transcoders = INTEL_INFO(dev)->num_pipes;
err_printf(m, " Power: %s\n",
error->pipe[i].power_domain_on ? "on" : "off");
err_printf(m, " SRC: %08x\n", error->pipe[i].source);
+ err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
err_printf(m, "Plane [%d]:\n", i);
err_printf(m, " CNTR: %08x\n", error->plane[i].control);