static void intel_increase_pllclock(struct drm_crtc *crtc);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
-typedef struct {
- /* given values */
- int n;
- int m1, m2;
- int p1, p2;
- /* derived values */
- int dot;
- int vco;
- int m;
- int p;
-} intel_clock_t;
-
typedef struct {
int min, max;
} intel_range_t;
struct intel_limit {
intel_range_t dot, vco, n, m, m1, m2, p, p1;
intel_p2_t p2;
- bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
- int, int, intel_clock_t *, intel_clock_t *);
+ /**
+ * find_pll() - Find the best values for the PLL
+ * @limit: limits for the PLL
+ * @crtc: current CRTC
+ * @target: target frequency in kHz
+ * @refclk: reference clock frequency in kHz
+ * @match_clock: if provided, @best_clock P divider must
+ * match the P divider from @match_clock
+ * used for LVDS downclocking
+ * @best_clock: best PLL values found
+ *
+ * Returns true on success, false on failure.
+ */
+ bool (*find_pll)(const intel_limit_t *limit,
+ struct drm_crtc *crtc,
+ int target, int refclk,
+ intel_clock_t *match_clock,
+ intel_clock_t *best_clock);
};
/* FDI */
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock);
-static bool
-intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-static bool
-intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-
static bool
intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *match_clock,
.find_pll = intel_g4x_find_best_PLL,
};
-static const intel_limit_t intel_limits_g4x_display_port = {
- .dot = { .min = 161670, .max = 227000 },
- .vco = { .min = 1750000, .max = 3500000},
- .n = { .min = 1, .max = 2 },
- .m = { .min = 97, .max = 108 },
- .m1 = { .min = 0x10, .max = 0x12 },
- .m2 = { .min = 0x05, .max = 0x06 },
- .p = { .min = 10, .max = 20 },
- .p1 = { .min = 1, .max = 2},
- .p2 = { .dot_limit = 0,
- .p2_slow = 10, .p2_fast = 10 },
- .find_pll = intel_find_pll_g4x_dp,
-};
-
static const intel_limit_t intel_limits_pineview_sdvo = {
.dot = { .min = 20000, .max = 400000},
.vco = { .min = 1700000, .max = 3500000 },
.find_pll = intel_g4x_find_best_PLL,
};
-static const intel_limit_t intel_limits_ironlake_display_port = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000},
- .n = { .min = 1, .max = 2 },
- .m = { .min = 81, .max = 90 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 10, .max = 20 },
- .p1 = { .min = 1, .max = 2},
- .p2 = { .dot_limit = 0,
- .p2_slow = 10, .p2_fast = 10 },
- .find_pll = intel_find_pll_ironlake_dp,
-};
-
static const intel_limit_t intel_limits_vlv_dac = {
.dot = { .min = 25000, .max = 270000 },
.vco = { .min = 4000000, .max = 6000000 },
.m1 = { .min = 2, .max = 3 },
.m2 = { .min = 11, .max = 156 },
.p = { .min = 10, .max = 30 },
- .p1 = { .min = 2, .max = 3 },
+ .p1 = { .min = 1, .max = 3 },
.p2 = { .dot_limit = 270000,
.p2_slow = 2, .p2_fast = 20 },
.find_pll = intel_vlv_find_best_pll,
};
static const intel_limit_t intel_limits_vlv_hdmi = {
- .dot = { .min = 20000, .max = 165000 },
- .vco = { .min = 4000000, .max = 5994000},
+ .dot = { .min = 25000, .max = 270000 },
+ .vco = { .min = 4000000, .max = 6000000 },
.n = { .min = 1, .max = 7 },
.m = { .min = 60, .max = 300 }, /* guess */
.m1 = { .min = 2, .max = 3 },
.m1 = { .min = 2, .max = 3 },
.m2 = { .min = 11, .max = 156 },
.p = { .min = 10, .max = 30 },
- .p1 = { .min = 2, .max = 3 },
+ .p1 = { .min = 1, .max = 3 },
.p2 = { .dot_limit = 270000,
.p2_slow = 2, .p2_fast = 20 },
.find_pll = intel_vlv_find_best_pll,
return I915_READ(DPIO_DATA);
}
-static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
- u32 val)
+void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, u32 val)
{
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
DRM_ERROR("DPIO write wait timed out\n");
}
-static void vlv_init_dpio(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /* Reset the DPIO config */
- I915_WRITE(DPIO_CTL, 0);
- POSTING_READ(DPIO_CTL);
- I915_WRITE(DPIO_CTL, 1);
- POSTING_READ(DPIO_CTL);
-}
-
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
int refclk)
{
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev)) {
- /* LVDS dual channel */
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
else
else
limit = &intel_limits_ironlake_single_lvds;
}
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
- limit = &intel_limits_ironlake_display_port;
- else
+ } else
limit = &intel_limits_ironlake_dac;
return limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
if (intel_is_dual_link_lvds(dev))
- /* LVDS with dual channel */
limit = &intel_limits_g4x_dual_channel_lvds;
else
- /* LVDS with dual channel */
limit = &intel_limits_g4x_single_channel_lvds;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
- limit = &intel_limits_g4x_display_port;
} else /* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
clock->dot = clock->vco / clock->p;
}
+static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
+{
+ return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
+}
+
static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
{
if (IS_PINEVIEW(dev)) {
pineview_clock(refclk, clock);
return;
}
- clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+ clock->m = i9xx_dpll_compute_m(clock);
clock->p = clock->p1 * clock->p2;
clock->vco = refclk * clock->m / (clock->n + 2);
clock->dot = clock->vco / clock->p;
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
- if (match_clock &&
- clock.p != match_clock->p)
- continue;
this_err = abs(clock.dot - target);
if (this_err < err_most) {
return found;
}
-static bool
-intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
-
- if (target < 200000) {
- clock.n = 1;
- clock.p1 = 2;
- clock.p2 = 10;
- clock.m1 = 12;
- clock.m2 = 9;
- } else {
- clock.n = 2;
- clock.p1 = 1;
- clock.p2 = 10;
- clock.m1 = 14;
- clock.m2 = 8;
- }
- intel_clock(dev, refclk, &clock);
- memcpy(best_clock, &clock, sizeof(intel_clock_t));
- return true;
-}
-
-/* DisplayPort has only two frequencies, 162MHz and 270MHz */
-static bool
-intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- intel_clock_t clock;
- if (target < 200000) {
- clock.p1 = 2;
- clock.p2 = 10;
- clock.n = 2;
- clock.m1 = 23;
- clock.m2 = 8;
- } else {
- clock.p1 = 1;
- clock.p2 = 10;
- clock.n = 1;
- clock.m1 = 14;
- clock.m2 = 2;
- }
- clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
- clock.p = (clock.p1 * clock.p2);
- clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
- clock.vco = 0;
- memcpy(best_clock, &clock, sizeof(intel_clock_t));
- return true;
-}
static bool
intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *match_clock,
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- return intel_crtc->cpu_transcoder;
+ return intel_crtc->config.cpu_transcoder;
}
static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
pch_dpll = I915_READ(PCH_DPLL_SEL);
cur_state = pll->pll_reg == _PCH_DPLL_B;
if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state,
- "PLL[%d] not attached to this transcoder %d: %08x\n",
- cur_state, crtc->pipe, pch_dpll)) {
+ "PLL[%d] not attached to this transcoder %c: %08x\n",
+ cur_state, pipe_name(crtc->pipe), pch_dpll)) {
cur_state = !!(val >> (4*crtc->pipe + 3));
WARN(cur_state != state,
- "PLL[%d] not %s on this transcoder %d: %08x\n",
+ "PLL[%d] not %s on this transcoder %c: %08x\n",
pll->pll_reg == _PCH_DPLL_B,
state_string(state),
- crtc->pipe,
+ pipe_name(crtc->pipe),
val);
}
}
if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
state = true;
- if (IS_HASWELL(dev_priv->dev) && cpu_transcoder != TRANSCODER_EDP &&
- !(I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_ENABLE)) {
+ if (!intel_display_power_enabled(dev_priv->dev,
+ POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
cur_state = false;
} else {
reg = PIPECONF(cpu_transcoder);
int cur_pipe;
/* Planes are fixed to pipes on ILK+ */
- if (HAS_PCH_SPLIT(dev_priv->dev)) {
+ if (HAS_PCH_SPLIT(dev_priv->dev) || IS_VALLEYVIEW(dev_priv->dev)) {
reg = DSPCNTR(pipe);
val = I915_READ(reg);
WARN((val & DISPLAY_PLANE_ENABLE),
}
}
+static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ int reg, i;
+ u32 val;
+
+ if (!IS_VALLEYVIEW(dev_priv->dev))
+ return;
+
+ /* Need to check both planes against the pipe */
+ for (i = 0; i < dev_priv->num_plane; i++) {
+ reg = SPCNTR(pipe, i);
+ val = I915_READ(reg);
+ WARN((val & SP_ENABLE),
+ "sprite %c assertion failure, should be off on pipe %c but is still active\n",
+ sprite_name(pipe, i), pipe_name(pipe));
+ }
+}
+
static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
{
u32 val;
WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
}
-static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe)
+static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
{
int reg;
u32 val;
bool enabled;
- reg = TRANSCONF(pipe);
+ reg = PCH_TRANSCONF(pipe);
val = I915_READ(reg);
enabled = !!(val & TRANS_ENABLE);
WARN(enabled,
static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
enum pipe pipe, u32 val)
{
- if ((val & PORT_ENABLE) == 0)
+ if ((val & SDVO_ENABLE) == 0)
return false;
if (HAS_PCH_CPT(dev_priv->dev)) {
- if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
return false;
} else {
- if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
+ if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
return false;
}
return true;
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0
+ WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
&& (val & SDVO_PIPE_B_SELECT),
"IBX PCH hdmi port still using transcoder B\n");
}
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
- assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
- assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
- assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
+ assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
+ assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
+ assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
}
/**
int reg;
u32 val;
+ assert_pipe_disabled(dev_priv, pipe);
+
/* No really, not for ILK+ */
BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
return I915_READ(SBI_DATA);
}
+void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
+{
+ u32 port_mask;
+
+ if (!port)
+ port_mask = DPLL_PORTB_READY_MASK;
+ else
+ port_mask = DPLL_PORTC_READY_MASK;
+
+ if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
+ WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
+ 'B' + port, I915_READ(DPLL(0)));
+}
+
/**
* ironlake_enable_pch_pll - enable PCH PLL
* @dev_priv: i915 private structure
DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
/* Make sure transcoder isn't still depending on us */
- assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
+ assert_pch_transcoder_disabled(dev_priv, intel_crtc->pipe);
reg = pll->pll_reg;
val = I915_READ(reg);
I915_WRITE(reg, val);
}
- reg = TRANSCONF(pipe);
+ reg = PCH_TRANSCONF(pipe);
val = I915_READ(reg);
pipeconf_val = I915_READ(PIPECONF(pipe));
I915_WRITE(reg, val | TRANS_ENABLE);
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
- DRM_ERROR("failed to enable transcoder %d\n", pipe);
+ DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
}
static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
else
val |= TRANS_PROGRESSIVE;
- I915_WRITE(TRANSCONF(TRANSCODER_A), val);
- if (wait_for(I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE, 100))
+ I915_WRITE(LPT_TRANSCONF, val);
+ if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
DRM_ERROR("Failed to enable PCH transcoder\n");
}
/* Ports must be off as well */
assert_pch_ports_disabled(dev_priv, pipe);
- reg = TRANSCONF(pipe);
+ reg = PCH_TRANSCONF(pipe);
val = I915_READ(reg);
val &= ~TRANS_ENABLE;
I915_WRITE(reg, val);
/* wait for PCH transcoder off, transcoder state */
if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
- DRM_ERROR("failed to disable transcoder %d\n", pipe);
+ DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
if (!HAS_PCH_IBX(dev)) {
/* Workaround: Clear the timing override chicken bit again. */
{
u32 val;
- val = I915_READ(_TRANSACONF);
+ val = I915_READ(LPT_TRANSCONF);
val &= ~TRANS_ENABLE;
- I915_WRITE(_TRANSACONF, val);
+ I915_WRITE(LPT_TRANSCONF, val);
/* wait for PCH transcoder off, transcoder state */
- if (wait_for((I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE) == 0, 50))
+ if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
DRM_ERROR("Failed to disable PCH transcoder\n");
/* Workaround: clear timing override bit. */
int reg;
u32 val;
+ assert_planes_disabled(dev_priv, pipe);
+ assert_sprites_disabled(dev_priv, pipe);
+
if (HAS_PCH_LPT(dev_priv->dev))
pch_transcoder = TRANSCODER_A;
else
* or we might hang the display.
*/
assert_planes_disabled(dev_priv, pipe);
+ assert_sprites_disabled(dev_priv, pipe);
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
intel_wait_for_vblank(dev_priv->dev, pipe);
}
+static bool need_vtd_wa(struct drm_device *dev)
+{
+#ifdef CONFIG_INTEL_IOMMU
+ if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
+ return true;
+#endif
+ return false;
+}
+
int
intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_i915_gem_object *obj,
alignment = 0;
break;
case I915_TILING_Y:
- /* FIXME: Is this true? */
- DRM_ERROR("Y tiled not allowed for scan out buffers\n");
+ /* Despite that we check this in framebuffer_init userspace can
+ * screw us over and change the tiling after the fact. Only
+ * pinned buffers can't change their tiling. */
+ DRM_DEBUG_DRIVER("Y tiled not allowed for scan out buffers\n");
return -EINVAL;
default:
BUG();
}
+ /* Note that the w/a also requires 64 PTE of padding following the
+ * bo. We currently fill all unused PTE with the shadow page and so
+ * we should always have valid PTE following the scanout preventing
+ * the VT-d warning.
+ */
+ if (need_vtd_wa(dev) && alignment < 256 * 1024)
+ alignment = 256 * 1024;
+
dev_priv->mm.interruptible = false;
ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
if (ret)
case 1:
break;
default:
- DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+ DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
return -EINVAL;
}
dspcntr |= DISPPLANE_RGBX101010;
break;
default:
- DRM_ERROR("Unknown pixel format 0x%08x\n", fb->pixel_format);
- return -EINVAL;
+ BUG();
}
if (INTEL_INFO(dev)->gen >= 4) {
case 2:
break;
default:
- DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+ DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
return -EINVAL;
}
dspcntr |= DISPPLANE_RGBX101010;
break;
default:
- DRM_ERROR("Unknown pixel format 0x%08x\n", fb->pixel_format);
- return -EINVAL;
+ BUG();
}
if (obj->tiling_mode != I915_TILING_NONE)
return dev_priv->display.update_plane(crtc, fb, x, y);
}
+void intel_display_handle_reset(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+
+ /*
+ * Flips in the rings have been nuked by the reset,
+ * so complete all pending flips so that user space
+ * will get its events and not get stuck.
+ *
+ * Also update the base address of all primary
+ * planes to the the last fb to make sure we're
+ * showing the correct fb after a reset.
+ *
+ * Need to make two loops over the crtcs so that we
+ * don't try to grab a crtc mutex before the
+ * pending_flip_queue really got woken up.
+ */
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum plane plane = intel_crtc->plane;
+
+ intel_prepare_page_flip(dev, plane);
+ intel_finish_page_flip_plane(dev, plane);
+ }
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ mutex_lock(&crtc->mutex);
+ if (intel_crtc->active)
+ dev_priv->display.update_plane(crtc, crtc->fb,
+ crtc->x, crtc->y);
+ mutex_unlock(&crtc->mutex);
+ }
+}
+
static int
intel_finish_fb(struct drm_framebuffer *old_fb)
{
return 0;
}
- if(intel_crtc->plane > dev_priv->num_pipe) {
- DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
- intel_crtc->plane,
- dev_priv->num_pipe);
+ if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
+ DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
+ plane_name(intel_crtc->plane),
+ INTEL_INFO(dev)->num_pipes);
return -EINVAL;
}
return ret;
}
- if (crtc->fb)
- intel_finish_fb(crtc->fb);
-
ret = dev_priv->display.update_plane(crtc, fb, x, y);
if (ret) {
intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
FDI_FE_ERRC_ENABLE);
}
+static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc)
+{
+ return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder;
+}
+
static void ivb_modeset_global_resources(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
uint32_t temp;
- /* When everything is off disable fdi C so that we could enable fdi B
- * with all lanes. XXX: This misses the case where a pipe is not using
- * any pch resources and so doesn't need any fdi lanes. */
- if (!pipe_B_crtc->base.enabled && !pipe_C_crtc->base.enabled) {
+ /*
+ * When everything is off disable fdi C so that we could enable fdi B
+ * with all lanes. Note that we don't care about enabled pipes without
+ * an enabled pch encoder.
+ */
+ if (!pipe_has_enabled_pch(pipe_B_crtc) &&
+ !pipe_has_enabled_pch(pipe_C_crtc)) {
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
/* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
/* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
/* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~((0x7 << 19) | (0x7 << 16));
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
mutex_unlock(&dev->struct_mutex);
}
-static bool ironlake_crtc_driving_pch(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *intel_encoder;
-
- /*
- * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
- * must be driven by its own crtc; no sharing is possible.
- */
- for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
- switch (intel_encoder->type) {
- case INTEL_OUTPUT_EDP:
- if (!intel_encoder_is_pch_edp(&intel_encoder->base))
- return false;
- continue;
- }
- }
-
- return true;
-}
-
-static bool haswell_crtc_driving_pch(struct drm_crtc *crtc)
-{
- return intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG);
-}
-
/* Program iCLKIP clock to the desired frequency */
static void lpt_program_iclkip(struct drm_crtc *crtc)
{
mutex_unlock(&dev_priv->dpio_lock);
}
+static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
+ enum pipe pch_transcoder)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
+
+ I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
+ I915_READ(HTOTAL(cpu_transcoder)));
+ I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
+ I915_READ(HBLANK(cpu_transcoder)));
+ I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
+ I915_READ(HSYNC(cpu_transcoder)));
+
+ I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
+ I915_READ(VTOTAL(cpu_transcoder)));
+ I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
+ I915_READ(VBLANK(cpu_transcoder)));
+ I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
+ I915_READ(VSYNC(cpu_transcoder)));
+ I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
+ I915_READ(VSYNCSHIFT(cpu_transcoder)));
+}
+
/*
* Enable PCH resources required for PCH ports:
* - PCH PLLs
int pipe = intel_crtc->pipe;
u32 reg, temp;
- assert_transcoder_disabled(dev_priv, pipe);
+ assert_pch_transcoder_disabled(dev_priv, pipe);
/* Write the TU size bits before fdi link training, so that error
* detection works. */
/* set transcoder timing, panel must allow it */
assert_panel_unlocked(dev_priv, pipe);
- I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
- I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
- I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
-
- I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
- I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
- I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
- I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
+ ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
intel_fdi_normal_train(crtc);
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
- assert_transcoder_disabled(dev_priv, TRANSCODER_A);
+ assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
lpt_program_iclkip(crtc);
/* Set transcoder timing. */
- I915_WRITE(_TRANS_HTOTAL_A, I915_READ(HTOTAL(cpu_transcoder)));
- I915_WRITE(_TRANS_HBLANK_A, I915_READ(HBLANK(cpu_transcoder)));
- I915_WRITE(_TRANS_HSYNC_A, I915_READ(HSYNC(cpu_transcoder)));
-
- I915_WRITE(_TRANS_VTOTAL_A, I915_READ(VTOTAL(cpu_transcoder)));
- I915_WRITE(_TRANS_VBLANK_A, I915_READ(VBLANK(cpu_transcoder)));
- I915_WRITE(_TRANS_VSYNC_A, I915_READ(VSYNC(cpu_transcoder)));
- I915_WRITE(_TRANS_VSYNCSHIFT_A, I915_READ(VSYNCSHIFT(cpu_transcoder)));
+ ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}
found:
intel_crtc->pch_pll = pll;
pll->refcount++;
- DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
+ DRM_DEBUG_DRIVER("using pll %d for pipe %c\n", i, pipe_name(intel_crtc->pipe));
prepare: /* separate function? */
DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
return pll;
}
-void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
+static void cpt_verify_modeset(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int dslreg = PIPEDSL(pipe);
udelay(500);
if (wait_for(I915_READ(dslreg) != temp, 5)) {
if (wait_for(I915_READ(dslreg) != temp, 5))
- DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+ DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
+ }
+}
+
+static void ironlake_pfit_enable(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+
+ if (crtc->config.pch_pfit.size) {
+ /* Force use of hard-coded filter coefficients
+ * as some pre-programmed values are broken,
+ * e.g. x201.
+ */
+ if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
+ I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
+ PF_PIPE_SEL_IVB(pipe));
+ else
+ I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
+ I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos);
+ I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size);
}
}
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 temp;
- bool is_pch_port;
WARN_ON(!crtc->enabled);
return;
intel_crtc->active = true;
+
+ intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
+ intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
+
intel_update_watermarks(dev);
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
}
- is_pch_port = ironlake_crtc_driving_pch(crtc);
- if (is_pch_port) {
+ if (intel_crtc->config.has_pch_encoder) {
/* Note: FDI PLL enabling _must_ be done before we enable the
* cpu pipes, hence this is separate from all the other fdi/pch
* enabling. */
encoder->pre_enable(encoder);
/* Enable panel fitting for LVDS */
- if (dev_priv->pch_pf_size &&
- (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
- /* Force use of hard-coded filter coefficients
- * as some pre-programmed values are broken,
- * e.g. x201.
- */
- if (IS_IVYBRIDGE(dev))
- I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
- PF_PIPE_SEL_IVB(pipe));
- else
- I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
- I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
- I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
- }
+ ironlake_pfit_enable(intel_crtc);
/*
* On ILK+ LUT must be loaded before the pipe is running but with
*/
intel_crtc_load_lut(crtc);
- intel_enable_pipe(dev_priv, pipe, is_pch_port);
+ intel_enable_pipe(dev_priv, pipe,
+ intel_crtc->config.has_pch_encoder);
intel_enable_plane(dev_priv, plane, pipe);
- if (is_pch_port)
+ if (intel_crtc->config.has_pch_encoder)
ironlake_pch_enable(crtc);
mutex_lock(&dev->struct_mutex);
encoder->enable(encoder);
if (HAS_PCH_CPT(dev))
- intel_cpt_verify_modeset(dev, intel_crtc->pipe);
+ cpt_verify_modeset(dev, intel_crtc->pipe);
/*
* There seems to be a race in PCH platform hw (at least on some
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
- bool is_pch_port;
WARN_ON(!crtc->enabled);
return;
intel_crtc->active = true;
- intel_update_watermarks(dev);
- is_pch_port = haswell_crtc_driving_pch(crtc);
+ intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
+ if (intel_crtc->config.has_pch_encoder)
+ intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
+
+ intel_update_watermarks(dev);
- if (is_pch_port)
+ if (intel_crtc->config.has_pch_encoder)
dev_priv->display.fdi_link_train(crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
intel_ddi_enable_pipe_clock(intel_crtc);
/* Enable panel fitting for eDP */
- if (dev_priv->pch_pf_size &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
- /* Force use of hard-coded filter coefficients
- * as some pre-programmed values are broken,
- * e.g. x201.
- */
- I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
- PF_PIPE_SEL_IVB(pipe));
- I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
- I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
- }
+ ironlake_pfit_enable(intel_crtc);
/*
* On ILK+ LUT must be loaded before the pipe is running but with
intel_crtc_load_lut(crtc);
intel_ddi_set_pipe_settings(crtc);
- intel_ddi_enable_pipe_func(crtc);
+ intel_ddi_enable_transcoder_func(crtc);
- intel_enable_pipe(dev_priv, pipe, is_pch_port);
+ intel_enable_pipe(dev_priv, pipe,
+ intel_crtc->config.has_pch_encoder);
intel_enable_plane(dev_priv, plane, pipe);
- if (is_pch_port)
+ if (intel_crtc->config.has_pch_encoder)
lpt_pch_enable(crtc);
mutex_lock(&dev->struct_mutex);
if (dev_priv->cfb_plane == plane)
intel_disable_fbc(dev);
+ intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
intel_disable_pipe(dev_priv, pipe);
/* Disable PF */
ironlake_fdi_disable(crtc);
ironlake_disable_pch_transcoder(dev_priv, pipe);
+ intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
if (HAS_PCH_CPT(dev)) {
/* disable TRANS_DP_CTL */
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
- enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
- bool is_pch_port;
+ enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
if (!intel_crtc->active)
return;
- is_pch_port = haswell_crtc_driving_pch(crtc);
-
for_each_encoder_on_crtc(dev, crtc, encoder)
encoder->disable(encoder);
if (dev_priv->cfb_plane == plane)
intel_disable_fbc(dev);
+ if (intel_crtc->config.has_pch_encoder)
+ intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false);
intel_disable_pipe(dev_priv, pipe);
intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
- /* Disable PF */
- I915_WRITE(PF_CTL(pipe), 0);
- I915_WRITE(PF_WIN_SZ(pipe), 0);
+ /* XXX: Once we have proper panel fitter state tracking implemented with
+ * hardware state read/check support we should switch to only disable
+ * the panel fitter when we know it's used. */
+ if (intel_display_power_enabled(dev,
+ POWER_DOMAIN_PIPE_PANEL_FITTER(pipe))) {
+ I915_WRITE(PF_CTL(pipe), 0);
+ I915_WRITE(PF_WIN_SZ(pipe), 0);
+ }
intel_ddi_disable_pipe_clock(intel_crtc);
if (encoder->post_disable)
encoder->post_disable(encoder);
- if (is_pch_port) {
+ if (intel_crtc->config.has_pch_encoder) {
lpt_disable_pch_transcoder(dev_priv);
+ intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
intel_ddi_fdi_disable(crtc);
}
/* Stop saying we're using TRANSCODER_EDP because some other CRTC might
* start using it. */
- intel_crtc->cpu_transcoder = (enum transcoder) intel_crtc->pipe;
+ intel_crtc->config.cpu_transcoder = (enum transcoder) intel_crtc->pipe;
intel_ddi_put_crtc_pll(crtc);
}
}
}
-static void i9xx_crtc_enable(struct drm_crtc *crtc)
+static void i9xx_pfit_enable(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc_config *pipe_config = &crtc->config;
+
+ if (!(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)))
+ return;
+
+ WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ pipe_config->gmch_pfit.control,
+ pipe_config->gmch_pfit.pgm_ratios);
+
+ I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
+
+ /* Border color in case we don't scale up to the full screen. Black by
+ * default, change to something else for debugging. */
+ I915_WRITE(BCLRPAT(crtc->pipe), 0);
+}
+
+static void valleyview_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
intel_crtc->active = true;
intel_update_watermarks(dev);
+ mutex_lock(&dev_priv->dpio_lock);
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->pre_pll_enable)
+ encoder->pre_pll_enable(encoder);
+
intel_enable_pll(dev_priv, pipe);
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_enable)
encoder->pre_enable(encoder);
+ /* VLV wants encoder enabling _before_ the pipe is up. */
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ encoder->enable(encoder);
+
+ /* Enable panel fitting for eDP */
+ i9xx_pfit_enable(intel_crtc);
+
intel_enable_pipe(dev_priv, pipe, false);
intel_enable_plane(dev_priv, plane, pipe);
- if (IS_G4X(dev))
- g4x_fixup_plane(dev_priv, pipe);
intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
intel_crtc_dpms_overlay(intel_crtc, true);
intel_crtc_update_cursor(crtc, true);
- for_each_encoder_on_crtc(dev, crtc, encoder)
- encoder->enable(encoder);
+ mutex_unlock(&dev_priv->dpio_lock);
}
-static void i9xx_crtc_disable(struct drm_crtc *crtc)
+static void i9xx_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
- u32 pctl;
+ WARN_ON(!crtc->enabled);
- if (!intel_crtc->active)
+ if (intel_crtc->active)
return;
- for_each_encoder_on_crtc(dev, crtc, encoder)
- encoder->disable(encoder);
-
- /* Give the overlay scaler a chance to disable if it's on this pipe */
- intel_crtc_wait_for_pending_flips(crtc);
- drm_vblank_off(dev, pipe);
- intel_crtc_dpms_overlay(intel_crtc, false);
- intel_crtc_update_cursor(crtc, false);
+ intel_crtc->active = true;
+ intel_update_watermarks(dev);
- if (dev_priv->cfb_plane == plane)
- intel_disable_fbc(dev);
+ intel_enable_pll(dev_priv, pipe);
- intel_disable_plane(dev_priv, plane, pipe);
- intel_disable_pipe(dev_priv, pipe);
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->pre_enable)
+ encoder->pre_enable(encoder);
- /* Disable pannel fitter if it is on this pipe. */
- pctl = I915_READ(PFIT_CONTROL);
- if ((pctl & PFIT_ENABLE) &&
- ((pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT) == pipe)
- I915_WRITE(PFIT_CONTROL, 0);
+ /* Enable panel fitting for LVDS */
+ i9xx_pfit_enable(intel_crtc);
- intel_disable_pll(dev_priv, pipe);
+ intel_enable_pipe(dev_priv, pipe, false);
+ intel_enable_plane(dev_priv, plane, pipe);
+ if (IS_G4X(dev))
+ g4x_fixup_plane(dev_priv, pipe);
- intel_crtc->active = false;
+ intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
- intel_update_watermarks(dev);
-}
-static void i9xx_crtc_off(struct drm_crtc *crtc)
-{
+ /* Give the overlay scaler a chance to enable if it's on this pipe */
+ intel_crtc_dpms_overlay(intel_crtc, true);
+ intel_crtc_update_cursor(crtc, true);
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ encoder->enable(encoder);
}
-static void intel_crtc_update_sarea(struct drm_crtc *crtc,
- bool enabled)
+static void i9xx_pfit_disable(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe;
+ uint32_t pctl = I915_READ(PFIT_CONTROL);
+
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ if (INTEL_INFO(dev)->gen >= 4)
+ pipe = (pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT;
+ else
+ pipe = PIPE_B;
+
+ if (pipe == crtc->pipe) {
+ DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n", pctl);
+ I915_WRITE(PFIT_CONTROL, 0);
+ }
+}
+
+static void i9xx_crtc_disable(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+
+ if (!intel_crtc->active)
+ return;
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ encoder->disable(encoder);
+
+ /* Give the overlay scaler a chance to disable if it's on this pipe */
+ intel_crtc_wait_for_pending_flips(crtc);
+ drm_vblank_off(dev, pipe);
+ intel_crtc_dpms_overlay(intel_crtc, false);
+ intel_crtc_update_cursor(crtc, false);
+
+ if (dev_priv->cfb_plane == plane)
+ intel_disable_fbc(dev);
+
+ intel_disable_plane(dev_priv, plane, pipe);
+ intel_disable_pipe(dev_priv, pipe);
+
+ i9xx_pfit_disable(intel_crtc);
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->post_disable)
+ encoder->post_disable(encoder);
+
+ intel_disable_pll(dev_priv, pipe);
+
+ intel_crtc->active = false;
+ intel_update_fbc(dev);
+ intel_update_watermarks(dev);
+}
+
+static void i9xx_crtc_off(struct drm_crtc *crtc)
+{
+}
+
+static void intel_crtc_update_sarea(struct drm_crtc *crtc,
+ bool enabled)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_master_private *master_priv;
return encoder->get_hw_state(encoder, &pipe);
}
-static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *pipe_B_crtc =
+ to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+
+ DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ if (pipe_config->fdi_lanes > 4) {
+ DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ return false;
+ }
+
+ if (IS_HASWELL(dev)) {
+ if (pipe_config->fdi_lanes > 2) {
+ DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
+ pipe_config->fdi_lanes);
+ return false;
+ } else {
+ return true;
+ }
+ }
+
+ if (INTEL_INFO(dev)->num_pipes == 2)
+ return true;
+
+ /* Ivybridge 3 pipe is really complicated */
+ switch (pipe) {
+ case PIPE_A:
+ return true;
+ case PIPE_B:
+ if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
+ pipe_config->fdi_lanes > 2) {
+ DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ return false;
+ }
+ return true;
+ case PIPE_C:
+ if (!pipe_has_enabled_pch(pipe_B_crtc) ||
+ pipe_B_crtc->config.fdi_lanes <= 2) {
+ if (pipe_config->fdi_lanes > 2) {
+ DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ return false;
+ }
+ } else {
+ DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
+ return false;
+ }
+ return true;
+ default:
+ BUG();
+ }
+}
+
+#define RETRY 1
+static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+ int target_clock, lane, link_bw;
+ bool setup_ok, needs_recompute = false;
+
+retry:
+ /* FDI is a binary signal running at ~2.7GHz, encoding
+ * each output octet as 10 bits. The actual frequency
+ * is stored as a divider into a 100MHz clock, and the
+ * mode pixel clock is stored in units of 1KHz.
+ * Hence the bw of each lane in terms of the mode signal
+ * is:
+ */
+ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+
+ if (pipe_config->pixel_target_clock)
+ target_clock = pipe_config->pixel_target_clock;
+ else
+ target_clock = adjusted_mode->clock;
+
+ lane = ironlake_get_lanes_required(target_clock, link_bw,
+ pipe_config->pipe_bpp);
+
+ pipe_config->fdi_lanes = lane;
+
+ if (pipe_config->pixel_multiplier > 1)
+ link_bw *= pipe_config->pixel_multiplier;
+ intel_link_compute_m_n(pipe_config->pipe_bpp, lane, target_clock,
+ link_bw, &pipe_config->fdi_m_n);
+
+ setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
+ intel_crtc->pipe, pipe_config);
+ if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
+ pipe_config->pipe_bpp -= 2*3;
+ DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
+ pipe_config->pipe_bpp);
+ needs_recompute = true;
+ pipe_config->bw_constrained = true;
+
+ goto retry;
+ }
+
+ if (needs_recompute)
+ return RETRY;
+
+ return setup_ok ? 0 : -EINVAL;
+}
+
+static int intel_crtc_compute_config(struct drm_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
{
struct drm_device *dev = crtc->dev;
+ struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
if (HAS_PCH_SPLIT(dev)) {
/* FDI link clock is fixed at 2.7G */
- if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
- return false;
+ if (pipe_config->requested_mode.clock * 3
+ > IRONLAKE_FDI_FREQ * 4)
+ return -EINVAL;
}
/* All interlaced capable intel hw wants timings in frames. Note though
* that intel_lvds_mode_fixup does some funny tricks with the crtc
* timings, so we need to be careful not to clobber these.*/
- if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
+ if (!pipe_config->timings_set)
drm_mode_set_crtcinfo(adjusted_mode, 0);
/* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes
*/
if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
adjusted_mode->hsync_start == adjusted_mode->hdisplay)
- return false;
+ return -EINVAL;
- return true;
+ if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
+ pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
+ } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
+ /* only a 8bpc pipe, with 6bpc dither through the panel fitter
+ * for lvds. */
+ pipe_config->pipe_bpp = 8*3;
+ }
+
+ if (pipe_config->has_pch_encoder)
+ return ironlake_fdi_compute_config(to_intel_crtc(crtc), pipe_config);
+
+ return 0;
}
static int valleyview_get_display_clock_speed(struct drm_device *dev)
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
-/**
- * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
- * @crtc: CRTC structure
- * @mode: requested mode
- *
- * A pipe may be connected to one or more outputs. Based on the depth of the
- * attached framebuffer, choose a good color depth to use on the pipe.
- *
- * If possible, match the pipe depth to the fb depth. In some cases, this
- * isn't ideal, because the connected output supports a lesser or restricted
- * set of depths. Resolve that here:
- * LVDS typically supports only 6bpc, so clamp down in that case
- * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
- * Displays may support a restricted set as well, check EDID and clamp as
- * appropriate.
- * DP may want to dither down to 6bpc to fit larger modes
- *
- * RETURNS:
- * Dithering requirement (i.e. false if display bpc and pipe bpc match,
- * true if they don't match).
- */
-static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- unsigned int *pipe_bpp,
- struct drm_display_mode *mode)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_connector *connector;
- struct intel_encoder *intel_encoder;
- unsigned int display_bpc = UINT_MAX, bpc;
-
- /* Walk the encoders & connectors on this crtc, get min bpc */
- for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-
- if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
- unsigned int lvds_bpc;
-
- if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
- LVDS_A3_POWER_UP)
- lvds_bpc = 8;
- else
- lvds_bpc = 6;
-
- if (lvds_bpc < display_bpc) {
- DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
- display_bpc = lvds_bpc;
- }
- continue;
- }
-
- /* Not one of the known troublemakers, check the EDID */
- list_for_each_entry(connector, &dev->mode_config.connector_list,
- head) {
- if (connector->encoder != &intel_encoder->base)
- continue;
-
- /* Don't use an invalid EDID bpc value */
- if (connector->display_info.bpc &&
- connector->display_info.bpc < display_bpc) {
- DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
- display_bpc = connector->display_info.bpc;
- }
- }
-
- if (intel_encoder->type == INTEL_OUTPUT_EDP) {
- /* Use VBT settings if we have an eDP panel */
- unsigned int edp_bpc = dev_priv->edp.bpp / 3;
-
- if (edp_bpc && edp_bpc < display_bpc) {
- DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
- display_bpc = edp_bpc;
- }
- continue;
- }
-
- /*
- * HDMI is either 12 or 8, so if the display lets 10bpc sneak
- * through, clamp it down. (Note: >12bpc will be caught below.)
- */
- if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
- if (display_bpc > 8 && display_bpc < 12) {
- DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
- display_bpc = 12;
- } else {
- DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
- display_bpc = 8;
- }
- }
- }
-
- if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
- DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
- display_bpc = 6;
- }
-
- /*
- * We could just drive the pipe at the highest bpc all the time and
- * enable dithering as needed, but that costs bandwidth. So choose
- * the minimum value that expresses the full color range of the fb but
- * also stays within the max display bpc discovered above.
- */
-
- switch (fb->depth) {
- case 8:
- bpc = 8; /* since we go through a colormap */
- break;
- case 15:
- case 16:
- bpc = 6; /* min is 18bpp */
- break;
- case 24:
- bpc = 8;
- break;
- case 30:
- bpc = 10;
- break;
- case 48:
- bpc = 12;
- break;
- default:
- DRM_DEBUG("unsupported depth, assuming 24 bits\n");
- bpc = min((unsigned int)8, display_bpc);
- break;
- }
-
- display_bpc = min(display_bpc, bpc);
-
- DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
- bpc, display_bpc);
-
- *pipe_bpp = display_bpc * 3;
-
- return display_bpc != bpc;
-}
-
static int vlv_get_refclk(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
return refclk;
}
-static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
- intel_clock_t *clock)
+static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc *crtc)
{
+ unsigned dotclock = crtc->config.adjusted_mode.clock;
+ struct dpll *clock = &crtc->config.dpll;
+
/* SDVO TV has fixed PLL values depend on its clock range,
this mirrors vbios setting. */
- if (adjusted_mode->clock >= 100000
- && adjusted_mode->clock < 140500) {
+ if (dotclock >= 100000 && dotclock < 140500) {
clock->p1 = 2;
clock->p2 = 10;
clock->n = 3;
clock->m1 = 16;
clock->m2 = 8;
- } else if (adjusted_mode->clock >= 140500
- && adjusted_mode->clock <= 200000) {
+ } else if (dotclock >= 140500 && dotclock <= 200000) {
clock->p1 = 1;
clock->p2 = 10;
clock->n = 6;
clock->m1 = 12;
clock->m2 = 8;
}
+
+ crtc->config.clock_set = true;
}
-static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
- intel_clock_t *clock,
+static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
+{
+ return (1 << dpll->n) << 16 | dpll->m1 << 8 | dpll->m2;
+}
+
+static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
+{
+ return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
+}
+
+static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
intel_clock_t *reduced_clock)
{
- struct drm_device *dev = crtc->dev;
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
+ int pipe = crtc->pipe;
u32 fp, fp2 = 0;
if (IS_PINEVIEW(dev)) {
- fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
+ fp = pnv_dpll_compute_fp(&crtc->config.dpll);
if (reduced_clock)
- fp2 = (1 << reduced_clock->n) << 16 |
- reduced_clock->m1 << 8 | reduced_clock->m2;
+ fp2 = pnv_dpll_compute_fp(reduced_clock);
} else {
- fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
+ fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
if (reduced_clock)
- fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
- reduced_clock->m2;
+ fp2 = i9xx_dpll_compute_fp(reduced_clock);
}
I915_WRITE(FP0(pipe), fp);
- intel_crtc->lowfreq_avail = false;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ crtc->lowfreq_avail = false;
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
reduced_clock && i915_powersave) {
I915_WRITE(FP1(pipe), fp2);
- intel_crtc->lowfreq_avail = true;
+ crtc->lowfreq_avail = true;
} else {
I915_WRITE(FP1(pipe), fp);
}
}
-static void vlv_update_pll(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- intel_clock_t *clock, intel_clock_t *reduced_clock,
- int num_connectors)
+static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = crtc->dev;
+ u32 reg_val;
+
+ /*
+ * PLLB opamp always calibrates to max value of 0x3f, force enable it
+ * and set it to a reasonable value instead.
+ */
+ reg_val = intel_dpio_read(dev_priv, DPIO_IREF(1));
+ reg_val &= 0xffffff00;
+ reg_val |= 0x00000030;
+ intel_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
+
+ reg_val = intel_dpio_read(dev_priv, DPIO_CALIBRATION);
+ reg_val &= 0x8cffffff;
+ reg_val = 0x8c000000;
+ intel_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
+
+ reg_val = intel_dpio_read(dev_priv, DPIO_IREF(1));
+ reg_val &= 0xffffff00;
+ intel_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
+
+ reg_val = intel_dpio_read(dev_priv, DPIO_CALIBRATION);
+ reg_val &= 0x00ffffff;
+ reg_val |= 0xb0000000;
+ intel_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
+}
+
+static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
+ struct intel_link_m_n *m_n)
+{
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- u32 dpll, mdiv, pdiv;
+ int pipe = crtc->pipe;
+
+ I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
+ I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
+ I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
+}
+
+static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
+ struct intel_link_m_n *m_n)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ enum transcoder transcoder = crtc->config.cpu_transcoder;
+
+ if (INTEL_INFO(dev)->gen >= 5) {
+ I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
+ I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
+ I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
+ } else {
+ I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
+ I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
+ I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
+ }
+}
+
+static void intel_dp_set_m_n(struct intel_crtc *crtc)
+{
+ if (crtc->config.has_pch_encoder)
+ intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
+ else
+ intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
+}
+
+static void vlv_update_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_display_mode *adjusted_mode =
+ &crtc->config.adjusted_mode;
+ struct intel_encoder *encoder;
+ int pipe = crtc->pipe;
+ u32 dpll, mdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
- bool is_sdvo;
- u32 temp;
+ bool is_hdmi;
+ u32 coreclk, reg_val, dpll_md;
mutex_lock(&dev_priv->dpio_lock);
- is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+ is_hdmi = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
- dpll = DPLL_VGA_MODE_DIS;
- dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
- dpll |= DPLL_REFA_CLK_ENABLE_VLV;
- dpll |= DPLL_INTEGRATED_CLOCK_VLV;
+ bestn = crtc->config.dpll.n;
+ bestm1 = crtc->config.dpll.m1;
+ bestm2 = crtc->config.dpll.m2;
+ bestp1 = crtc->config.dpll.p1;
+ bestp2 = crtc->config.dpll.p2;
- I915_WRITE(DPLL(pipe), dpll);
- POSTING_READ(DPLL(pipe));
+ /* See eDP HDMI DPIO driver vbios notes doc */
- bestn = clock->n;
- bestm1 = clock->m1;
- bestm2 = clock->m2;
- bestp1 = clock->p1;
- bestp2 = clock->p2;
+ /* PLL B needs special handling */
+ if (pipe)
+ vlv_pllb_recal_opamp(dev_priv);
- /*
- * In Valleyview PLL and program lane counter registers are exposed
- * through DPIO interface
- */
+ /* Set up Tx target for periodic Rcomp update */
+ intel_dpio_write(dev_priv, DPIO_IREF_BCAST, 0x0100000f);
+
+ /* Disable target IRef on PLL */
+ reg_val = intel_dpio_read(dev_priv, DPIO_IREF_CTL(pipe));
+ reg_val &= 0x00ffffff;
+ intel_dpio_write(dev_priv, DPIO_IREF_CTL(pipe), reg_val);
+
+ /* Disable fast lock */
+ intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x610);
+
+ /* Set idtafcrecal before PLL is enabled */
mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
mdiv |= ((bestn << DPIO_N_SHIFT));
- mdiv |= (1 << DPIO_POST_DIV_SHIFT);
mdiv |= (1 << DPIO_K_SHIFT);
- mdiv |= DPIO_ENABLE_CALIBRATION;
+
+ /*
+ * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
+ * but we don't support that).
+ * Note: don't use the DAC post divider as it seems unstable.
+ */
+ mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
- intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
+ mdiv |= DPIO_ENABLE_CALIBRATION;
+ intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
- pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
- (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
- (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
- (5 << DPIO_CLK_BIAS_CTL_SHIFT);
- intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
+ /* Set HBR and RBR LPF coefficients */
+ if (adjusted_mode->clock == 162000 ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
+ intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
+ 0x005f0021);
+ else
+ intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
+ 0x00d0000f);
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
+ /* Use SSC source */
+ if (!pipe)
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df40000);
+ else
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df70000);
+ } else { /* HDMI or VGA */
+ /* Use bend source */
+ if (!pipe)
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df70000);
+ else
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df40000);
+ }
- intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
+ coreclk = intel_dpio_read(dev_priv, DPIO_CORE_CLK(pipe));
+ coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
+ coreclk |= 0x01000000;
+ intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), coreclk);
- dpll |= DPLL_VCO_ENABLE;
- I915_WRITE(DPLL(pipe), dpll);
- POSTING_READ(DPLL(pipe));
- if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
- DRM_ERROR("DPLL %d failed to lock\n", pipe);
+ intel_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000);
- intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ if (encoder->pre_pll_enable)
+ encoder->pre_pll_enable(encoder);
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
- intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ /* Enable DPIO clock input */
+ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
+ DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
+ if (pipe)
+ dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+ dpll |= DPLL_VCO_ENABLE;
I915_WRITE(DPLL(pipe), dpll);
-
- /* Wait for the clocks to stabilize. */
POSTING_READ(DPLL(pipe));
udelay(150);
- temp = 0;
- if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
+ if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+ DRM_ERROR("DPLL %d failed to lock\n", pipe);
+
+ dpll_md = 0;
+ if (crtc->config.pixel_multiplier > 1) {
+ dpll_md = (crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
- I915_WRITE(DPLL_MD(pipe), temp);
+ I915_WRITE(DPLL_MD(pipe), dpll_md);
POSTING_READ(DPLL_MD(pipe));
- /* Now program lane control registers */
- if(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)
- || intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
- {
- temp = 0x1000C4;
- if(pipe == 1)
- temp |= (1 << 21);
- intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
- }
- if(intel_pipe_has_type(crtc,INTEL_OUTPUT_EDP))
- {
- temp = 0x1000C4;
- if(pipe == 1)
- temp |= (1 << 21);
- intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
- }
+ if (crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(crtc);
mutex_unlock(&dev_priv->dpio_lock);
}
-static void i9xx_update_pll(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- intel_clock_t *clock, intel_clock_t *reduced_clock,
+static void i9xx_update_pll(struct intel_crtc *crtc,
+ intel_clock_t *reduced_clock,
int num_connectors)
{
- struct drm_device *dev = crtc->dev;
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
+ int pipe = crtc->pipe;
u32 dpll;
bool is_sdvo;
+ struct dpll *clock = &crtc->config.dpll;
- i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+ i9xx_update_pll_dividers(crtc, reduced_clock);
- is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+ is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
- if (is_sdvo) {
- int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- }
- dpll |= DPLL_DVO_HIGH_SPEED;
+
+ if ((crtc->config.pixel_multiplier > 1) &&
+ (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) {
+ dpll |= (crtc->config.pixel_multiplier - 1)
+ << SDVO_MULTIPLIER_SHIFT_HIRES;
}
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+
+ if (is_sdvo)
+ dpll |= DPLL_DVO_HIGH_SPEED;
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (INTEL_INFO(dev)->gen >= 4)
dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
- if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
/* XXX: just matching BIOS for now */
/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
dpll |= 3;
- else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
POSTING_READ(DPLL(pipe));
udelay(150);
- for_each_encoder_on_crtc(dev, crtc, encoder)
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
if (encoder->pre_pll_enable)
encoder->pre_pll_enable(encoder);
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
- intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ if (crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(crtc);
I915_WRITE(DPLL(pipe), dpll);
udelay(150);
if (INTEL_INFO(dev)->gen >= 4) {
- u32 temp = 0;
- if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
+ u32 dpll_md = 0;
+ if (crtc->config.pixel_multiplier > 1) {
+ dpll_md = (crtc->config.pixel_multiplier - 1)
+ << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
- I915_WRITE(DPLL_MD(pipe), temp);
+ I915_WRITE(DPLL_MD(pipe), dpll_md);
} else {
/* The pixel multiplier can only be updated once the
* DPLL is enabled and the clocks are stable.
}
}
-static void i8xx_update_pll(struct drm_crtc *crtc,
+static void i8xx_update_pll(struct intel_crtc *crtc,
struct drm_display_mode *adjusted_mode,
- intel_clock_t *clock, intel_clock_t *reduced_clock,
+ intel_clock_t *reduced_clock,
int num_connectors)
{
- struct drm_device *dev = crtc->dev;
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
- int pipe = intel_crtc->pipe;
+ int pipe = crtc->pipe;
u32 dpll;
+ struct dpll *clock = &crtc->config.dpll;
- i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+ i9xx_update_pll_dividers(crtc, reduced_clock);
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
} else {
if (clock->p1 == 2)
dpll |= PLL_P2_DIVIDE_BY_4;
}
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
- /* XXX: just matching BIOS for now */
- /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
- dpll |= 3;
- else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
POSTING_READ(DPLL(pipe));
udelay(150);
- for_each_encoder_on_crtc(dev, crtc, encoder)
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
if (encoder->pre_pll_enable)
encoder->pre_pll_enable(encoder);
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_crtc->pipe;
- enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
- uint32_t vsyncshift;
+ enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
+ uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end;
+
+ /* We need to be careful not to changed the adjusted mode, for otherwise
+ * the hw state checker will get angry at the mismatch. */
+ crtc_vtotal = adjusted_mode->crtc_vtotal;
+ crtc_vblank_end = adjusted_mode->crtc_vblank_end;
if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
/* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
+ crtc_vtotal -= 1;
+ crtc_vblank_end -= 1;
vsyncshift = adjusted_mode->crtc_hsync_start
- adjusted_mode->crtc_htotal / 2;
} else {
I915_WRITE(VTOTAL(cpu_transcoder),
(adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
+ ((crtc_vtotal - 1) << 16));
I915_WRITE(VBLANK(cpu_transcoder),
(adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ ((crtc_vblank_end - 1) << 16));
I915_WRITE(VSYNC(cpu_transcoder),
(adjusted_mode->crtc_vsync_start - 1) |
((adjusted_mode->crtc_vsync_end - 1) << 16));
((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
}
+static void intel_get_pipe_timings(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ uint32_t tmp;
+
+ tmp = I915_READ(HTOTAL(cpu_transcoder));
+ pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
+ pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
+ tmp = I915_READ(HBLANK(cpu_transcoder));
+ pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
+ pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
+ tmp = I915_READ(HSYNC(cpu_transcoder));
+ pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
+ pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
+
+ tmp = I915_READ(VTOTAL(cpu_transcoder));
+ pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
+ pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
+ tmp = I915_READ(VBLANK(cpu_transcoder));
+ pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
+ pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
+ tmp = I915_READ(VSYNC(cpu_transcoder));
+ pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
+ pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
+
+ if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
+ pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
+ pipe_config->adjusted_mode.crtc_vtotal += 1;
+ pipe_config->adjusted_mode.crtc_vblank_end += 1;
+ }
+
+ tmp = I915_READ(PIPESRC(crtc->pipe));
+ pipe_config->requested_mode.vdisplay = (tmp & 0xffff) + 1;
+ pipe_config->requested_mode.hdisplay = ((tmp >> 16) & 0xffff) + 1;
+}
+
+static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t pipeconf;
+
+ pipeconf = I915_READ(PIPECONF(intel_crtc->pipe));
+
+ if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+ /* Enable pixel doubling when the dot clock is > 90% of the (display)
+ * core speed.
+ *
+ * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+ * pipe == 0 check?
+ */
+ if (intel_crtc->config.requested_mode.clock >
+ dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+ pipeconf |= PIPECONF_DOUBLE_WIDE;
+ else
+ pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+ }
+
+ /* only g4x and later have fancy bpc/dither controls */
+ if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
+ pipeconf &= ~(PIPECONF_BPC_MASK |
+ PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
+
+ /* Bspec claims that we can't use dithering for 30bpp pipes. */
+ if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30)
+ pipeconf |= PIPECONF_DITHER_EN |
+ PIPECONF_DITHER_TYPE_SP;
+
+ switch (intel_crtc->config.pipe_bpp) {
+ case 18:
+ pipeconf |= PIPECONF_6BPC;
+ break;
+ case 24:
+ pipeconf |= PIPECONF_8BPC;
+ break;
+ case 30:
+ pipeconf |= PIPECONF_10BPC;
+ break;
+ default:
+ /* Case prevented by intel_choose_pipe_bpp_dither. */
+ BUG();
+ }
+ }
+
+ if (HAS_PIPE_CXSR(dev)) {
+ if (intel_crtc->lowfreq_avail) {
+ DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+ pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+ } else {
+ DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+ pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ }
+ }
+
+ pipeconf &= ~PIPECONF_INTERLACE_MASK;
+ if (!IS_GEN2(dev) &&
+ intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
+ pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+ else
+ pipeconf |= PIPECONF_PROGRESSIVE;
+
+ if (IS_VALLEYVIEW(dev)) {
+ if (intel_crtc->config.limited_color_range)
+ pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
+ else
+ pipeconf &= ~PIPECONF_COLOR_RANGE_SELECT;
+ }
+
+ I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
+ POSTING_READ(PIPECONF(intel_crtc->pipe));
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dspcntr, pipeconf;
+ u32 dspcntr;
bool ok, has_reduced_clock = false, is_sdvo = false;
- bool is_lvds = false, is_tv = false, is_dp = false;
+ bool is_lvds = false, is_tv = false;
struct intel_encoder *encoder;
const intel_limit_t *limit;
int ret;
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
}
num_connectors++;
&clock,
&reduced_clock);
}
+ /* Compat-code for transition, will disappear. */
+ if (!intel_crtc->config.clock_set) {
+ intel_crtc->config.dpll.n = clock.n;
+ intel_crtc->config.dpll.m1 = clock.m1;
+ intel_crtc->config.dpll.m2 = clock.m2;
+ intel_crtc->config.dpll.p1 = clock.p1;
+ intel_crtc->config.dpll.p2 = clock.p2;
+ }
if (is_sdvo && is_tv)
- i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
+ i9xx_adjust_sdvo_tv_clock(intel_crtc);
if (IS_GEN2(dev))
- i8xx_update_pll(crtc, adjusted_mode, &clock,
+ i8xx_update_pll(intel_crtc, adjusted_mode,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
else if (IS_VALLEYVIEW(dev))
- vlv_update_pll(crtc, mode, adjusted_mode, &clock,
- has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
+ vlv_update_pll(intel_crtc);
else
- i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+ i9xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
-
- /* setup pipeconf */
- pipeconf = I915_READ(PIPECONF(pipe));
+ num_connectors);
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
- if (pipe == 0)
- dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
- else
- dspcntr |= DISPPLANE_SEL_PIPE_B;
-
- if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
- /* Enable pixel doubling when the dot clock is > 90% of the (display)
- * core speed.
- *
- * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
- * pipe == 0 check?
- */
- if (mode->clock >
- dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
- pipeconf |= PIPECONF_DOUBLE_WIDE;
+ if (!IS_VALLEYVIEW(dev)) {
+ if (pipe == 0)
+ dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
else
- pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
}
- /* default to 8bpc */
- pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
- if (is_dp) {
- if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
- pipeconf |= PIPECONF_6BPC |
- PIPECONF_DITHER_EN |
- PIPECONF_DITHER_TYPE_SP;
- }
- }
-
- if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
- if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
- pipeconf |= PIPECONF_6BPC |
- PIPECONF_ENABLE |
- I965_PIPECONF_ACTIVE;
- }
- }
-
- DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe));
drm_mode_debug_printmodeline(mode);
- if (HAS_PIPE_CXSR(dev)) {
- if (intel_crtc->lowfreq_avail) {
- DRM_DEBUG_KMS("enabling CxSR downclocking\n");
- pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
- } else {
- DRM_DEBUG_KMS("disabling CxSR downclocking\n");
- pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
- }
- }
-
- pipeconf &= ~PIPECONF_INTERLACE_MASK;
- if (!IS_GEN2(dev) &&
- adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
- pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
- else
- pipeconf |= PIPECONF_PROGRESSIVE;
-
intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
/* pipesrc and dspsize control the size that is scaled from,
(mode->hdisplay - 1));
I915_WRITE(DSPPOS(plane), 0);
- I915_WRITE(PIPECONF(pipe), pipeconf);
- POSTING_READ(PIPECONF(pipe));
- intel_enable_pipe(dev_priv, pipe, false);
-
- intel_wait_for_vblank(dev, pipe);
+ i9xx_set_pipeconf(intel_crtc);
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
return ret;
}
+static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
+
+ tmp = I915_READ(PIPECONF(crtc->pipe));
+ if (!(tmp & PIPECONF_ENABLE))
+ return false;
+
+ intel_get_pipe_timings(crtc, pipe_config);
+
+ return true;
+}
+
static void ironlake_init_pch_refclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
- u32 temp;
+ u32 val, final;
bool has_lvds = false;
bool has_cpu_edp = false;
bool has_pch_edp = false;
* PCH B stepping, previous chipset stepping should be
* ignoring this setting.
*/
- temp = I915_READ(PCH_DREF_CONTROL);
+ val = I915_READ(PCH_DREF_CONTROL);
+
+ /* As we must carefully and slowly disable/enable each source in turn,
+ * compute the final state we want first and check if we need to
+ * make any changes at all.
+ */
+ final = val;
+ final &= ~DREF_NONSPREAD_SOURCE_MASK;
+ if (has_ck505)
+ final |= DREF_NONSPREAD_CK505_ENABLE;
+ else
+ final |= DREF_NONSPREAD_SOURCE_ENABLE;
+
+ final &= ~DREF_SSC_SOURCE_MASK;
+ final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ final &= ~DREF_SSC1_ENABLE;
+
+ if (has_panel) {
+ final |= DREF_SSC_SOURCE_ENABLE;
+
+ if (intel_panel_use_ssc(dev_priv) && can_ssc)
+ final |= DREF_SSC1_ENABLE;
+
+ if (has_cpu_edp) {
+ if (intel_panel_use_ssc(dev_priv) && can_ssc)
+ final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ else
+ final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ } else
+ final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+ } else {
+ final |= DREF_SSC_SOURCE_DISABLE;
+ final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+ }
+
+ if (final == val)
+ return;
+
/* Always enable nonspread source */
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ val &= ~DREF_NONSPREAD_SOURCE_MASK;
if (has_ck505)
- temp |= DREF_NONSPREAD_CK505_ENABLE;
+ val |= DREF_NONSPREAD_CK505_ENABLE;
else
- temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ val |= DREF_NONSPREAD_SOURCE_ENABLE;
if (has_panel) {
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
+ val &= ~DREF_SSC_SOURCE_MASK;
+ val |= DREF_SSC_SOURCE_ENABLE;
/* SSC must be turned on before enabling the CPU output */
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
DRM_DEBUG_KMS("Using SSC on panel\n");
- temp |= DREF_SSC1_ENABLE;
+ val |= DREF_SSC1_ENABLE;
} else
- temp &= ~DREF_SSC1_ENABLE;
+ val &= ~DREF_SSC1_ENABLE;
/* Get SSC going before enabling the outputs */
- I915_WRITE(PCH_DREF_CONTROL, temp);
+ I915_WRITE(PCH_DREF_CONTROL, val);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
/* Enable CPU source on CPU attached eDP */
if (has_cpu_edp) {
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
DRM_DEBUG_KMS("Using SSC on eDP\n");
- temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
}
else
- temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
} else
- temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+ val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
+ I915_WRITE(PCH_DREF_CONTROL, val);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
} else {
DRM_DEBUG_KMS("Disabling SSC entirely\n");
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
/* Turn off CPU output */
- temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+ val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
+ I915_WRITE(PCH_DREF_CONTROL, val);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
/* Turn off the SSC source */
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_DISABLE;
+ val &= ~DREF_SSC_SOURCE_MASK;
+ val |= DREF_SSC_SOURCE_DISABLE;
/* Turn off SSC1 */
- temp &= ~ DREF_SSC1_ENABLE;
+ val &= ~DREF_SSC1_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
+ I915_WRITE(PCH_DREF_CONTROL, val);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
+
+ BUG_ON(val != final);
}
/* Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O. */
tmp |= (0x12 << 24);
intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
- if (!is_sdv) {
- tmp = intel_sbi_read(dev_priv, 0x808C, SBI_MPHY);
- tmp &= ~(0x3 << 6);
- tmp |= (1 << 6) | (1 << 0);
- intel_sbi_write(dev_priv, 0x808C, tmp, SBI_MPHY);
- }
-
if (is_sdv) {
tmp = intel_sbi_read(dev_priv, 0x800C, SBI_MPHY);
tmp |= 0x7FFF;
return 120000;
}
-static void ironlake_set_pipeconf(struct drm_crtc *crtc,
- struct drm_display_mode *adjusted_mode,
- bool dither)
+static void ironlake_set_pipeconf(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
val = I915_READ(PIPECONF(pipe));
val &= ~PIPECONF_BPC_MASK;
- switch (intel_crtc->bpp) {
+ switch (intel_crtc->config.pipe_bpp) {
case 18:
val |= PIPECONF_6BPC;
break;
}
val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
- if (dither)
+ if (intel_crtc->config.dither)
val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
val &= ~PIPECONF_INTERLACE_MASK;
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+ if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
val |= PIPECONF_INTERLACED_ILK;
else
val |= PIPECONF_PROGRESSIVE;
- if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+ if (intel_crtc->config.limited_color_range)
val |= PIPECONF_COLOR_RANGE_SELECT;
else
val &= ~PIPECONF_COLOR_RANGE_SELECT;
* is supported, but eventually this should handle various
* RGB<->YCbCr scenarios as well.
*/
-static void intel_set_pipe_csc(struct drm_crtc *crtc,
- const struct drm_display_mode *adjusted_mode)
+static void intel_set_pipe_csc(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
* consideration.
*/
- if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+ if (intel_crtc->config.limited_color_range)
coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
/*
if (INTEL_INFO(dev)->gen > 6) {
uint16_t postoff = 0;
- if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+ if (intel_crtc->config.limited_color_range)
postoff = (16 * (1 << 13) / 255) & 0x1fff;
I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
} else {
uint32_t mode = CSC_MODE_YUV_TO_RGB;
- if (adjusted_mode->private_flags & INTEL_MODE_LIMITED_COLOR_RANGE)
+ if (intel_crtc->config.limited_color_range)
mode |= CSC_BLACK_SCREEN_OFFSET;
I915_WRITE(PIPE_CSC_MODE(pipe), mode);
}
}
-static void haswell_set_pipeconf(struct drm_crtc *crtc,
- struct drm_display_mode *adjusted_mode,
- bool dither)
+static void haswell_set_pipeconf(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
uint32_t val;
val = I915_READ(PIPECONF(cpu_transcoder));
val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
- if (dither)
+ if (intel_crtc->config.dither)
val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
val &= ~PIPECONF_INTERLACE_MASK_HSW;
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+ if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
val |= PIPECONF_INTERLACED_ILK;
else
val |= PIPECONF_PROGRESSIVE;
}
if (is_sdvo && is_tv)
- i9xx_adjust_sdvo_tv_clock(adjusted_mode, clock);
+ i9xx_adjust_sdvo_tv_clock(to_intel_crtc(crtc));
return true;
}
POSTING_READ(SOUTH_CHICKEN1);
}
-static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc)
+static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *pipe_B_crtc =
- to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
-
- DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
- if (intel_crtc->fdi_lanes > 4) {
- DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
- /* Clamp lanes to avoid programming the hw with bogus values. */
- intel_crtc->fdi_lanes = 4;
-
- return false;
- }
-
- if (dev_priv->num_pipe == 2)
- return true;
switch (intel_crtc->pipe) {
case PIPE_A:
- return true;
+ break;
case PIPE_B:
- if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
- intel_crtc->fdi_lanes > 2) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
- /* Clamp lanes to avoid programming the hw with bogus values. */
- intel_crtc->fdi_lanes = 2;
-
- return false;
- }
-
- if (intel_crtc->fdi_lanes > 2)
+ if (intel_crtc->config.fdi_lanes > 2)
WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
else
cpt_enable_fdi_bc_bifurcation(dev);
- return true;
- case PIPE_C:
- if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
- if (intel_crtc->fdi_lanes > 2) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n",
- intel_crtc->pipe, intel_crtc->fdi_lanes);
- /* Clamp lanes to avoid programming the hw with bogus values. */
- intel_crtc->fdi_lanes = 2;
-
- return false;
- }
- } else {
- DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
- return false;
- }
-
+ break;
+ case PIPE_C:
cpt_enable_fdi_bc_bifurcation(dev);
- return true;
+ break;
default:
BUG();
}
return bps / (link_bw * 8) + 1;
}
-static void ironlake_set_m_n(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
- struct intel_encoder *intel_encoder, *edp_encoder = NULL;
- struct intel_link_m_n m_n = {0};
- int target_clock, pixel_multiplier, lane, link_bw;
- bool is_dp = false, is_cpu_edp = false;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
- switch (intel_encoder->type) {
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
- case INTEL_OUTPUT_EDP:
- is_dp = true;
- if (!intel_encoder_is_pch_edp(&intel_encoder->base))
- is_cpu_edp = true;
- edp_encoder = intel_encoder;
- break;
- }
- }
-
- /* FDI link */
- pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- lane = 0;
- /* CPU eDP doesn't require FDI link, so just set DP M/N
- according to current link config */
- if (is_cpu_edp) {
- intel_edp_link_config(edp_encoder, &lane, &link_bw);
- } else {
- /* FDI is a binary signal running at ~2.7GHz, encoding
- * each output octet as 10 bits. The actual frequency
- * is stored as a divider into a 100MHz clock, and the
- * mode pixel clock is stored in units of 1KHz.
- * Hence the bw of each lane in terms of the mode signal
- * is:
- */
- link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
- }
-
- /* [e]DP over FDI requires target mode clock instead of link clock. */
- if (edp_encoder)
- target_clock = intel_edp_target_clock(edp_encoder, mode);
- else if (is_dp)
- target_clock = mode->clock;
- else
- target_clock = adjusted_mode->clock;
-
- if (!lane)
- lane = ironlake_get_lanes_required(target_clock, link_bw,
- intel_crtc->bpp);
-
- intel_crtc->fdi_lanes = lane;
-
- if (pixel_multiplier > 1)
- link_bw *= pixel_multiplier;
- intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
-
- I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
- I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
- I915_WRITE(PIPE_LINK_M1(cpu_transcoder), m_n.link_m);
- I915_WRITE(PIPE_LINK_N1(cpu_transcoder), m_n.link_n);
+ return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
}
static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
- struct drm_display_mode *adjusted_mode,
- intel_clock_t *clock, u32 fp)
+ u32 *fp,
+ intel_clock_t *reduced_clock, u32 *fp2)
{
struct drm_crtc *crtc = &intel_crtc->base;
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
uint32_t dpll;
- int factor, pixel_multiplier, num_connectors = 0;
+ int factor, num_connectors = 0;
bool is_lvds = false, is_sdvo = false, is_tv = false;
- bool is_dp = false, is_cpu_edp = false;
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
switch (intel_encoder->type) {
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
- case INTEL_OUTPUT_EDP:
- is_dp = true;
- if (!intel_encoder_is_pch_edp(&intel_encoder->base))
- is_cpu_edp = true;
- break;
}
num_connectors++;
if (is_lvds) {
if ((intel_panel_use_ssc(dev_priv) &&
dev_priv->lvds_ssc_freq == 100) ||
- intel_is_dual_link_lvds(dev))
+ (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
factor = 25;
} else if (is_sdvo && is_tv)
factor = 20;
- if (clock->m < factor * clock->n)
- fp |= FP_CB_TUNE;
+ if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
+ *fp |= FP_CB_TUNE;
+
+ if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
+ *fp2 |= FP_CB_TUNE;
dpll = 0;
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
- if (is_sdvo) {
- pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
- }
- dpll |= DPLL_DVO_HIGH_SPEED;
+
+ if (intel_crtc->config.pixel_multiplier > 1) {
+ dpll |= (intel_crtc->config.pixel_multiplier - 1)
+ << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
- if (is_dp && !is_cpu_edp)
+
+ if (is_sdvo)
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ if (intel_crtc->config.has_dp_encoder)
dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
- dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
/* also FPA1 */
- dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
- switch (clock->p2) {
+ switch (intel_crtc->config.dpll.p2) {
case 5:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
break;
}
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dpll, fp = 0, fp2 = 0;
+ u32 dpll = 0, fp = 0, fp2 = 0;
bool ok, has_reduced_clock = false;
- bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+ bool is_lvds = false;
struct intel_encoder *encoder;
int ret;
- bool dither, fdi_config_ok;
for_each_encoder_on_crtc(dev, crtc, encoder) {
switch (encoder->type) {
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
- case INTEL_OUTPUT_EDP:
- is_dp = true;
- if (!intel_encoder_is_pch_edp(&encoder->base))
- is_cpu_edp = true;
- break;
}
num_connectors++;
WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
"Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
+ intel_crtc->config.cpu_transcoder = pipe;
+
ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
&has_reduced_clock, &reduced_clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
+ /* Compat-code for transition, will disappear. */
+ if (!intel_crtc->config.clock_set) {
+ intel_crtc->config.dpll.n = clock.n;
+ intel_crtc->config.dpll.m1 = clock.m1;
+ intel_crtc->config.dpll.m2 = clock.m2;
+ intel_crtc->config.dpll.p1 = clock.p1;
+ intel_crtc->config.dpll.p2 = clock.p2;
+ }
/* Ensure that the cursor is valid for the new mode before changing... */
intel_crtc_update_cursor(crtc, true);
- /* determine panel color depth */
- dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
- adjusted_mode);
- if (is_lvds && dev_priv->lvds_dither)
- dither = true;
-
- fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
- if (has_reduced_clock)
- fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
- reduced_clock.m2;
-
- dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
-
- DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe));
drm_mode_debug_printmodeline(mode);
/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
- if (!is_cpu_edp) {
+ if (intel_crtc->config.has_pch_encoder) {
struct intel_pch_pll *pll;
+ fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
+ if (has_reduced_clock)
+ fp2 = i9xx_dpll_compute_fp(&reduced_clock);
+
+ dpll = ironlake_compute_dpll(intel_crtc,
+ &fp, &reduced_clock,
+ has_reduced_clock ? &fp2 : NULL);
+
pll = intel_get_pch_pll(intel_crtc, dpll, fp);
if (pll == NULL) {
- DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
- pipe);
+ DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
+ pipe_name(pipe));
return -EINVAL;
}
} else
intel_put_pch_pll(intel_crtc);
- if (is_dp && !is_cpu_edp)
- intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ if (intel_crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(intel_crtc);
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_pll_enable)
intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
- /* Note, this also computes intel_crtc->fdi_lanes which is used below in
- * ironlake_check_fdi_lanes. */
- ironlake_set_m_n(crtc, mode, adjusted_mode);
-
- fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
+ if (intel_crtc->config.has_pch_encoder) {
+ intel_cpu_transcoder_set_m_n(intel_crtc,
+ &intel_crtc->config.fdi_m_n);
+ }
- ironlake_set_pipeconf(crtc, adjusted_mode, dither);
+ if (IS_IVYBRIDGE(dev))
+ ivybridge_update_fdi_bc_bifurcation(intel_crtc);
- intel_wait_for_vblank(dev, pipe);
+ ironlake_set_pipeconf(crtc);
/* Set up the display plane register */
I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
- return fdi_config_ok ? ret : -EINVAL;
+ return ret;
}
-static void haswell_modeset_global_resources(struct drm_device *dev)
+static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder transcoder = pipe_config->cpu_transcoder;
+
+ pipe_config->fdi_m_n.link_m = I915_READ(PIPE_LINK_M1(transcoder));
+ pipe_config->fdi_m_n.link_n = I915_READ(PIPE_LINK_N1(transcoder));
+ pipe_config->fdi_m_n.gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
+ & ~TU_SIZE_MASK;
+ pipe_config->fdi_m_n.gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
+ pipe_config->fdi_m_n.tu = ((I915_READ(PIPE_DATA_M1(transcoder))
+ & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
+}
+
+static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
+
+ tmp = I915_READ(PIPECONF(crtc->pipe));
+ if (!(tmp & PIPECONF_ENABLE))
+ return false;
+
+ if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
+ pipe_config->has_pch_encoder = true;
+
+ tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
+ pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
+ FDI_DP_PORT_WIDTH_SHIFT) + 1;
+
+ ironlake_get_fdi_m_n_config(crtc, pipe_config);
+ }
+
+ intel_get_pipe_timings(crtc, pipe_config);
+
+ return true;
+}
+
+static void haswell_modeset_global_resources(struct drm_device *dev)
+{
bool enable = false;
struct intel_crtc *crtc;
struct intel_encoder *encoder;
/* XXX: Should check for edp transcoder here, but thanks to init
* sequence that's not yet available. Just in case desktop eDP
* on PORT D is possible on haswell, too. */
+ /* Even the eDP panel fitter is outside the always-on well. */
+ if (crtc->config.pch_pfit.size && crtc->base.enabled)
+ enable = true;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
enable = true;
}
- /* Even the eDP panel fitter is outside the always-on well. */
- if (dev_priv->pch_pf_size)
- enable = true;
-
intel_set_power_well(dev, enable);
}
static int haswell_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
int num_connectors = 0;
- bool is_dp = false, is_cpu_edp = false;
+ bool is_cpu_edp = false;
struct intel_encoder *encoder;
int ret;
- bool dither;
for_each_encoder_on_crtc(dev, crtc, encoder) {
switch (encoder->type) {
- case INTEL_OUTPUT_DISPLAYPORT:
- is_dp = true;
- break;
case INTEL_OUTPUT_EDP:
- is_dp = true;
if (!intel_encoder_is_pch_edp(&encoder->base))
is_cpu_edp = true;
break;
}
if (is_cpu_edp)
- intel_crtc->cpu_transcoder = TRANSCODER_EDP;
+ intel_crtc->config.cpu_transcoder = TRANSCODER_EDP;
else
- intel_crtc->cpu_transcoder = pipe;
+ intel_crtc->config.cpu_transcoder = pipe;
/* We are not sure yet this won't happen. */
WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
num_connectors, pipe_name(pipe));
- WARN_ON(I915_READ(PIPECONF(intel_crtc->cpu_transcoder)) &
+ WARN_ON(I915_READ(PIPECONF(intel_crtc->config.cpu_transcoder)) &
(PIPECONF_ENABLE | I965_PIPECONF_ACTIVE));
WARN_ON(I915_READ(DSPCNTR(plane)) & DISPLAY_PLANE_ENABLE);
/* Ensure that the cursor is valid for the new mode before changing... */
intel_crtc_update_cursor(crtc, true);
- /* determine panel color depth */
- dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
- adjusted_mode);
-
- DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe_name(pipe));
drm_mode_debug_printmodeline(mode);
- if (is_dp && !is_cpu_edp)
- intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ if (intel_crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(intel_crtc);
intel_crtc->lowfreq_avail = false;
intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
- if (!is_dp || is_cpu_edp)
- ironlake_set_m_n(crtc, mode, adjusted_mode);
+ if (intel_crtc->config.has_pch_encoder) {
+ intel_cpu_transcoder_set_m_n(intel_crtc,
+ &intel_crtc->config.fdi_m_n);
+ }
- haswell_set_pipeconf(crtc, adjusted_mode, dither);
+ haswell_set_pipeconf(crtc);
- intel_set_pipe_csc(crtc, adjusted_mode);
+ intel_set_pipe_csc(crtc);
/* Set up the display plane register */
I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
return ret;
}
+static bool haswell_get_pipe_config(struct intel_crtc *crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
+ uint32_t tmp;
+
+ if (!intel_display_power_enabled(dev,
+ POWER_DOMAIN_TRANSCODER(cpu_transcoder)))
+ return false;
+
+ tmp = I915_READ(PIPECONF(cpu_transcoder));
+ if (!(tmp & PIPECONF_ENABLE))
+ return false;
+
+ /*
+ * Haswell has only FDI/PCH transcoder A. It is which is connected to
+ * DDI E. So just check whether this pipe is wired to DDI E and whether
+ * the PCH transcoder is on.
+ */
+ tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
+ if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
+ I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
+ pipe_config->has_pch_encoder = true;
+
+ tmp = I915_READ(FDI_RX_CTL(PIPE_A));
+ pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
+ FDI_DP_PORT_WIDTH_SHIFT) + 1;
+
+ ironlake_get_fdi_m_n_config(crtc, pipe_config);
+ }
+
+ intel_get_pipe_timings(crtc, pipe_config);
+
+ return true;
+}
+
static int intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *fb)
{
struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &intel_crtc->config.adjusted_mode;
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
int pipe = intel_crtc->pipe;
int ret;
drm_vblank_pre_modeset(dev, pipe);
- ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
- x, y, fb);
+ ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
+
drm_vblank_post_modeset(dev, pipe);
if (ret != 0)
encoder->base.base.id,
drm_get_encoder_name(&encoder->base),
mode->base.id, mode->name);
- encoder_funcs = encoder->base.helper_private;
- encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+ if (encoder->mode_set) {
+ encoder->mode_set(encoder);
+ } else {
+ encoder_funcs = encoder->base.helper_private;
+ encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
+ }
}
return 0;
eldv |= IBX_ELD_VALIDB << 4;
eldv |= IBX_ELD_VALIDB << 8;
} else {
- DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
+ DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i));
eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
}
/* we only need to pin inside GTT if cursor is non-phy */
mutex_lock(&dev->struct_mutex);
if (!dev_priv->info->cursor_needs_physical) {
+ unsigned alignment;
+
if (obj->tiling_mode) {
DRM_ERROR("cursor cannot be tiled\n");
ret = -EINVAL;
goto fail_locked;
}
- ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
+ /* Note that the w/a also requires 2 PTE of padding following
+ * the bo. We currently fill all unused PTE with the shadow
+ * page and so we should always have valid PTE following the
+ * cursor preventing the VT-d warning.
+ */
+ alignment = 0;
+ if (need_vtd_wa(dev))
+ alignment = 64*1024;
+
+ ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
if (ret) {
DRM_ERROR("failed to move cursor bo into the GTT\n");
goto fail_locked;
intel_crtc_load_lut(crtc);
}
-/**
- * Get a pipe with a simple mode set on it for doing load-based monitor
- * detection.
- *
- * It will be up to the load-detect code to adjust the pipe as appropriate for
- * its requirements. The pipe will be connected to no other encoders.
- *
- * Currently this code will only succeed if there is a pipe with no encoders
- * configured for it. In the future, it could choose to temporarily disable
- * some outputs to free up a pipe for its use.
- *
- * \return crtc, or NULL if no pipes are available.
- */
-
/* VESA 640x480x72Hz mode to set on the pipe */
static struct drm_display_mode load_detect_mode = {
DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
struct drm_display_mode *mode;
int htot = I915_READ(HTOTAL(cpu_transcoder));
int hsync = I915_READ(HSYNC(cpu_transcoder));
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
- struct drm_i915_gem_object *obj;
unsigned long flags;
/* Ignore early vblank irqs */
spin_unlock_irqrestore(&dev->event_lock, flags);
- obj = work->old_fb_obj;
-
wake_up_all(&dev_priv->pending_flip_queue);
queue_work(dev_priv->wq, &work->work);
}
}
-static struct drm_display_mode *
-intel_modeset_adjusted_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode)
+static int
+pipe_config_set_bpp(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_connector *connector;
+ int bpp;
+
+ switch (fb->pixel_format) {
+ case DRM_FORMAT_C8:
+ bpp = 8*3; /* since we go through a colormap */
+ break;
+ case DRM_FORMAT_XRGB1555:
+ case DRM_FORMAT_ARGB1555:
+ /* checked in intel_framebuffer_init already */
+ if (WARN_ON(INTEL_INFO(dev)->gen > 3))
+ return -EINVAL;
+ case DRM_FORMAT_RGB565:
+ bpp = 6*3; /* min is 18bpp */
+ break;
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_ABGR8888:
+ /* checked in intel_framebuffer_init already */
+ if (WARN_ON(INTEL_INFO(dev)->gen < 4))
+ return -EINVAL;
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ARGB8888:
+ bpp = 8*3;
+ break;
+ case DRM_FORMAT_XRGB2101010:
+ case DRM_FORMAT_ARGB2101010:
+ case DRM_FORMAT_XBGR2101010:
+ case DRM_FORMAT_ABGR2101010:
+ /* checked in intel_framebuffer_init already */
+ if (WARN_ON(INTEL_INFO(dev)->gen < 4))
+ return -EINVAL;
+ bpp = 10*3;
+ break;
+ /* TODO: gen4+ supports 16 bpc floating point, too. */
+ default:
+ DRM_DEBUG_KMS("unsupported depth\n");
+ return -EINVAL;
+ }
+
+ pipe_config->pipe_bpp = bpp;
+
+ /* Clamp display bpp to EDID value */
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ head) {
+ if (connector->encoder && connector->encoder->crtc != crtc)
+ continue;
+
+ /* Don't use an invalid EDID bpc value */
+ if (connector->display_info.bpc &&
+ connector->display_info.bpc * 3 < bpp) {
+ DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
+ bpp, connector->display_info.bpc*3);
+ pipe_config->pipe_bpp = connector->display_info.bpc*3;
+ }
+
+ /* Clamp bpp to 8 on screens without EDID 1.4 */
+ if (connector->display_info.bpc == 0 && bpp > 24) {
+ DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
+ bpp);
+ pipe_config->pipe_bpp = 24;
+ }
+ }
+
+ return bpp;
+}
+
+static struct intel_crtc_config *
+intel_modeset_pipe_config(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
- struct drm_display_mode *adjusted_mode;
struct drm_encoder_helper_funcs *encoder_funcs;
struct intel_encoder *encoder;
+ struct intel_crtc_config *pipe_config;
+ int plane_bpp, ret = -EINVAL;
+ bool retry = true;
- adjusted_mode = drm_mode_duplicate(dev, mode);
- if (!adjusted_mode)
+ pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
+ if (!pipe_config)
return ERR_PTR(-ENOMEM);
+ drm_mode_copy(&pipe_config->adjusted_mode, mode);
+ drm_mode_copy(&pipe_config->requested_mode, mode);
+
+ plane_bpp = pipe_config_set_bpp(crtc, fb, pipe_config);
+ if (plane_bpp < 0)
+ goto fail;
+
+encoder_retry:
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
if (&encoder->new_crtc->base != crtc)
continue;
+
+ if (encoder->compute_config) {
+ if (!(encoder->compute_config(encoder, pipe_config))) {
+ DRM_DEBUG_KMS("Encoder config failure\n");
+ goto fail;
+ }
+
+ continue;
+ }
+
encoder_funcs = encoder->base.helper_private;
- if (!(encoder_funcs->mode_fixup(&encoder->base, mode,
- adjusted_mode))) {
+ if (!(encoder_funcs->mode_fixup(&encoder->base,
+ &pipe_config->requested_mode,
+ &pipe_config->adjusted_mode))) {
DRM_DEBUG_KMS("Encoder fixup failed\n");
goto fail;
}
}
- if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) {
+ ret = intel_crtc_compute_config(crtc, pipe_config);
+ if (ret < 0) {
DRM_DEBUG_KMS("CRTC fixup failed\n");
goto fail;
}
+
+ if (ret == RETRY) {
+ if (WARN(!retry, "loop in pipe configuration computation\n")) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
+ retry = false;
+ goto encoder_retry;
+ }
+
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
- return adjusted_mode;
+ pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
+ DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
+ plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
+
+ return pipe_config;
fail:
- drm_mode_destroy(dev, adjusted_mode);
- return ERR_PTR(-EINVAL);
+ kfree(pipe_config);
+ return ERR_PTR(ret);
}
/* Computes which crtcs are affected and sets the relevant bits in the mask. For
if (crtc->enabled)
*prepare_pipes |= 1 << intel_crtc->pipe;
- /* We only support modeset on one single crtc, hence we need to do that
- * only for the passed in crtc iff we change anything else than just
- * disable crtcs.
- *
- * This is actually not true, to be fully compatible with the old crtc
- * helper we automatically disable _any_ output (i.e. doesn't need to be
- * connected to the crtc we're modesetting on) if it's disconnected.
- * Which is a rather nutty api (since changed the output configuration
- * without userspace's explicit request can lead to confusion), but
- * alas. Hence we currently need to modeset on all pipes we prepare. */
+ /*
+ * For simplicity do a full modeset on any pipe where the output routing
+ * changed. We could be more clever, but that would require us to be
+ * more careful with calling the relevant encoder->mode_set functions.
+ */
if (*prepare_pipes)
*modeset_pipes = *prepare_pipes;
/* ... and mask these out. */
*modeset_pipes &= ~(*disable_pipes);
*prepare_pipes &= ~(*disable_pipes);
+
+ /*
+ * HACK: We don't (yet) fully support global modesets. intel_set_config
+ * obies this rule, but the modeset restore mode of
+ * intel_modeset_setup_hw_state does not.
+ */
+ *modeset_pipes &= 1 << intel_crtc->pipe;
+ *prepare_pipes &= 1 << intel_crtc->pipe;
+
+ DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
+ *modeset_pipes, *prepare_pipes, *disable_pipes);
}
static bool intel_crtc_in_use(struct drm_crtc *crtc)
list_for_each_entry((intel_crtc), \
&(dev)->mode_config.crtc_list, \
base.head) \
- if (mask & (1 <<(intel_crtc)->pipe)) \
+ if (mask & (1 <<(intel_crtc)->pipe))
+
+static bool
+intel_pipe_config_compare(struct intel_crtc_config *current_config,
+ struct intel_crtc_config *pipe_config)
+{
+#define PIPE_CONF_CHECK_I(name) \
+ if (current_config->name != pipe_config->name) { \
+ DRM_ERROR("mismatch in " #name " " \
+ "(expected %i, found %i)\n", \
+ current_config->name, \
+ pipe_config->name); \
+ return false; \
+ }
+
+#define PIPE_CONF_CHECK_FLAGS(name, mask) \
+ if ((current_config->name ^ pipe_config->name) & (mask)) { \
+ DRM_ERROR("mismatch in " #name " " \
+ "(expected %i, found %i)\n", \
+ current_config->name & (mask), \
+ pipe_config->name & (mask)); \
+ return false; \
+ }
+
+ PIPE_CONF_CHECK_I(has_pch_encoder);
+ PIPE_CONF_CHECK_I(fdi_lanes);
+ PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
+ PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
+ PIPE_CONF_CHECK_I(fdi_m_n.link_m);
+ PIPE_CONF_CHECK_I(fdi_m_n.link_n);
+ PIPE_CONF_CHECK_I(fdi_m_n.tu);
+
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end);
+
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
+ PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
+
+ PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
+ DRM_MODE_FLAG_INTERLACE);
+
+ PIPE_CONF_CHECK_I(requested_mode.hdisplay);
+ PIPE_CONF_CHECK_I(requested_mode.vdisplay);
+
+#undef PIPE_CONF_CHECK_I
+#undef PIPE_CONF_CHECK_FLAGS
+
+ return true;
+}
void
intel_modeset_check_state(struct drm_device *dev)
{
+ drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
+ struct intel_crtc_config pipe_config;
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
"crtc's computed enabled state doesn't match tracked enabled state "
"(expected %i, found %i)\n", enabled, crtc->base.enabled);
- assert_pipe(dev->dev_private, crtc->pipe, crtc->active);
+ memset(&pipe_config, 0, sizeof(pipe_config));
+ pipe_config.cpu_transcoder = crtc->config.cpu_transcoder;
+ active = dev_priv->display.get_pipe_config(crtc,
+ &pipe_config);
+ WARN(crtc->active != active,
+ "crtc active state doesn't match with hw state "
+ "(expected %i, found %i)\n", crtc->active, active);
+
+ WARN(active &&
+ !intel_pipe_config_compare(&crtc->config, &pipe_config),
+ "pipe state doesn't match!\n");
}
}
-int intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb)
+static int __intel_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
+ struct drm_display_mode *saved_mode, *saved_hwmode;
+ struct intel_crtc_config *pipe_config = NULL;
struct intel_crtc *intel_crtc;
unsigned disable_pipes, prepare_pipes, modeset_pipes;
int ret = 0;
intel_modeset_affected_pipes(crtc, &modeset_pipes,
&prepare_pipes, &disable_pipes);
- DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
- modeset_pipes, prepare_pipes, disable_pipes);
-
- for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
- intel_crtc_disable(&intel_crtc->base);
-
*saved_hwmode = crtc->hwmode;
*saved_mode = crtc->mode;
* Hence simply check whether any bit is set in modeset_pipes in all the
* pieces of code that are not yet converted to deal with mutliple crtcs
* changing their mode at the same time. */
- adjusted_mode = NULL;
if (modeset_pipes) {
- adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
- if (IS_ERR(adjusted_mode)) {
- ret = PTR_ERR(adjusted_mode);
+ pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
+ if (IS_ERR(pipe_config)) {
+ ret = PTR_ERR(pipe_config);
+ pipe_config = NULL;
+
goto out;
}
}
+ for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
+ intel_crtc_disable(&intel_crtc->base);
+
for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
if (intel_crtc->base.enabled)
dev_priv->display.crtc_disable(&intel_crtc->base);
/* crtc->mode is already used by the ->mode_set callbacks, hence we need
* to set it here already despite that we pass it down the callchain.
*/
- if (modeset_pipes)
+ if (modeset_pipes) {
+ enum transcoder tmp = to_intel_crtc(crtc)->config.cpu_transcoder;
crtc->mode = *mode;
+ /* mode_set/enable/disable functions rely on a correct pipe
+ * config. */
+ to_intel_crtc(crtc)->config = *pipe_config;
+ to_intel_crtc(crtc)->config.cpu_transcoder = tmp;
+ }
/* Only after disabling all output pipelines that will be changed can we
* update the the output configuration. */
*/
for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
ret = intel_crtc_mode_set(&intel_crtc->base,
- mode, adjusted_mode,
x, y, fb);
if (ret)
goto done;
if (modeset_pipes) {
/* Store real post-adjustment hardware mode. */
- crtc->hwmode = *adjusted_mode;
+ crtc->hwmode = pipe_config->adjusted_mode;
/* Calculate and store various constants which
* are later needed by vblank and swap-completion
/* FIXME: add subpixel order */
done:
- drm_mode_destroy(dev, adjusted_mode);
if (ret && crtc->enabled) {
crtc->hwmode = *saved_hwmode;
crtc->mode = *saved_mode;
- } else {
- intel_modeset_check_state(dev);
}
out:
+ kfree(pipe_config);
kfree(saved_mode);
return ret;
}
+int intel_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb)
+{
+ int ret;
+
+ ret = __intel_set_mode(crtc, mode, x, y, fb);
+
+ if (ret == 0)
+ intel_modeset_check_state(crtc->dev);
+
+ return ret;
+}
+
void intel_crtc_restore_mode(struct drm_crtc *crtc)
{
intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
config->mode_changed = true;
} else if (set->fb == NULL) {
config->mode_changed = true;
- } else if (set->fb->depth != set->crtc->fb->depth) {
- config->mode_changed = true;
- } else if (set->fb->bits_per_pixel !=
- set->crtc->fb->bits_per_pixel) {
+ } else if (set->fb->pixel_format !=
+ set->crtc->fb->pixel_format) {
config->mode_changed = true;
} else
config->fb_changed = true;
goto fail;
}
} else if (config->fb_changed) {
+ intel_crtc_wait_for_pending_flips(set->crtc);
+
ret = intel_pipe_set_base(set->crtc,
set->x, set->y, set->fb);
}
/* Swap pipes & planes for FBC on pre-965 */
intel_crtc->pipe = pipe;
intel_crtc->plane = pipe;
- intel_crtc->cpu_transcoder = pipe;
+ intel_crtc->config.cpu_transcoder = pipe;
if (IS_MOBILE(dev) && IS_GEN3(dev)) {
DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
intel_crtc->plane = !pipe;
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
- intel_crtc->bpp = 24; /* default for pre-Ironlake */
-
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
}
I915_WRITE(PFIT_CONTROL, 0);
}
- if (!(HAS_DDI(dev) && (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
+ if (!IS_ULT(dev))
intel_crt_init(dev);
if (HAS_DDI(dev)) {
if (has_edp_a(dev))
intel_dp_init(dev, DP_A, PORT_A);
- if (I915_READ(HDMIB) & PORT_DETECTED) {
+ if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
/* PCH SDVOB multiplex with HDMIB */
found = intel_sdvo_init(dev, PCH_SDVOB, true);
if (!found)
- intel_hdmi_init(dev, HDMIB, PORT_B);
+ intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
intel_dp_init(dev, PCH_DP_B, PORT_B);
}
- if (I915_READ(HDMIC) & PORT_DETECTED)
- intel_hdmi_init(dev, HDMIC, PORT_C);
+ if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
+ intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
- if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
- intel_hdmi_init(dev, HDMID, PORT_D);
+ if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
+ intel_hdmi_init(dev, PCH_HDMID, PORT_D);
if (I915_READ(PCH_DP_C) & DP_DETECTED)
intel_dp_init(dev, PCH_DP_C, PORT_C);
if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
- if (I915_READ(VLV_DISPLAY_BASE + SDVOB) & PORT_DETECTED) {
- intel_hdmi_init(dev, VLV_DISPLAY_BASE + SDVOB, PORT_B);
+ if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
+ intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
+ PORT_B);
if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
}
-
- if (I915_READ(VLV_DISPLAY_BASE + SDVOC) & PORT_DETECTED)
- intel_hdmi_init(dev, VLV_DISPLAY_BASE + SDVOC, PORT_C);
-
} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
bool found = false;
- if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOB\n");
- found = intel_sdvo_init(dev, SDVOB, true);
+ found = intel_sdvo_init(dev, GEN3_SDVOB, true);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
- intel_hdmi_init(dev, SDVOB, PORT_B);
+ intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
}
if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
/* Before G4X SDVOC doesn't have its own detect register */
- if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOC\n");
- found = intel_sdvo_init(dev, SDVOC, false);
+ found = intel_sdvo_init(dev, GEN3_SDVOC, false);
}
- if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+ if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
if (SUPPORTS_INTEGRATED_HDMI(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
- intel_hdmi_init(dev, SDVOC, PORT_C);
+ intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
}
if (SUPPORTS_INTEGRATED_DP(dev)) {
DRM_DEBUG_KMS("probing DP_C\n");
{
struct drm_i915_private *dev_priv = dev->dev_private;
- /* We always want a DPMS function */
if (HAS_DDI(dev)) {
+ dev_priv->display.get_pipe_config = haswell_get_pipe_config;
dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
dev_priv->display.crtc_enable = haswell_crtc_enable;
dev_priv->display.crtc_disable = haswell_crtc_disable;
dev_priv->display.off = haswell_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
} else if (HAS_PCH_SPLIT(dev)) {
+ dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;
dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
+ dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+ dev_priv->display.crtc_enable = valleyview_crtc_enable;
+ dev_priv->display.crtc_disable = i9xx_crtc_disable;
+ dev_priv->display.off = i9xx_crtc_off;
+ dev_priv->display.update_plane = i9xx_update_plane;
} else {
+ dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i, ret;
+ int i, j, ret;
drm_mode_config_init(dev);
intel_init_pm(dev);
+ if (INTEL_INFO(dev)->num_pipes == 0)
+ return;
+
intel_init_display(dev);
if (IS_GEN2(dev)) {
dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
DRM_DEBUG_KMS("%d display pipe%s available.\n",
- dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
+ INTEL_INFO(dev)->num_pipes,
+ INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
- for (i = 0; i < dev_priv->num_pipe; i++) {
+ for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) {
intel_crtc_init(dev, i);
- ret = intel_plane_init(dev, i);
- if (ret)
- DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
+ for (j = 0; j < dev_priv->num_plane; j++) {
+ ret = intel_plane_init(dev, i, j);
+ if (ret)
+ DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
+ pipe_name(i), sprite_name(i, j), ret);
+ }
}
intel_cpu_pll_init(dev);
static bool
intel_check_plane_mapping(struct intel_crtc *crtc)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg, val;
- if (dev_priv->num_pipe == 1)
+ if (INTEL_INFO(dev)->num_pipes == 1)
return true;
reg = DSPCNTR(!crtc->plane);
u32 reg;
/* Clear any frame start delays used for debugging left by the BIOS */
- reg = PIPECONF(crtc->cpu_transcoder);
+ reg = PIPECONF(crtc->config.cpu_transcoder);
I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
/* We need to sanitize the plane -> pipe mapping first because this will
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
u32 tmp;
+ struct drm_plane *plane;
struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
case TRANS_DDI_EDP_INPUT_C_ONOFF:
pipe = PIPE_C;
break;
+ default:
+ /* A bogus value has been programmed, disable
+ * the transcoder */
+ WARN(1, "Bogus eDP source %08x\n", tmp);
+ intel_ddi_disable_transcoder_func(dev_priv,
+ TRANSCODER_EDP);
+ goto setup_pipes;
}
crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- crtc->cpu_transcoder = TRANSCODER_EDP;
+ crtc->config.cpu_transcoder = TRANSCODER_EDP;
DRM_DEBUG_KMS("Pipe %c using transcoder EDP\n",
pipe_name(pipe));
}
}
- for_each_pipe(pipe) {
- crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
+setup_pipes:
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ enum transcoder tmp = crtc->config.cpu_transcoder;
+ memset(&crtc->config, 0, sizeof(crtc->config));
+ crtc->config.cpu_transcoder = tmp;
- tmp = I915_READ(PIPECONF(crtc->cpu_transcoder));
- if (tmp & PIPECONF_ENABLE)
- crtc->active = true;
- else
- crtc->active = false;
+ crtc->active = dev_priv->display.get_pipe_config(crtc,
+ &crtc->config);
crtc->base.enabled = crtc->active;
}
if (force_restore) {
+ /*
+ * We need to use raw interfaces for restoring state to avoid
+ * checking (bogus) intermediate states.
+ */
for_each_pipe(pipe) {
- intel_crtc_restore_mode(dev_priv->pipe_to_crtc_mapping[pipe]);
+ struct drm_crtc *crtc =
+ dev_priv->pipe_to_crtc_mapping[pipe];
+
+ __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
+ crtc->fb);
}
+ list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+ intel_plane_restore(plane);
i915_redisable_vga(dev);
} else {
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
+ /*
+ * Interrupts and polling as the first thing to avoid creating havoc.
+ * Too much stuff here (turning of rps, connectors, ...) would
+ * experience fancy races otherwise.
+ */
+ drm_irq_uninstall(dev);
+ cancel_work_sync(&dev_priv->hotplug_work);
+ /*
+ * Due to the hpd irq storm handling the hotplug work can re-arm the
+ * poll handlers. Hence disable polling after hpd handling is shut down.
+ */
drm_kms_helper_poll_fini(dev);
+
mutex_lock(&dev->struct_mutex);
intel_unregister_dsm_handler();
-
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
/* Skip inactive CRTCs */
if (!crtc->fb)
ironlake_teardown_rc6(dev);
- if (IS_VALLEYVIEW(dev))
- vlv_init_dpio(dev);
-
mutex_unlock(&dev->struct_mutex);
- /* Disable the irq before mode object teardown, for the irq might
- * enqueue unpin/hotplug work. */
- drm_irq_uninstall(dev);
- cancel_work_sync(&dev_priv->hotplug_work);
- cancel_work_sync(&dev_priv->rps.work);
-
/* flush any delayed tasks or pending work */
flush_scheduled_work();
+ /* destroy backlight, if any, before the connectors */
+ intel_panel_destroy_backlight(dev);
+
drm_mode_config_cleanup(dev);
intel_cleanup_overlay(dev);
for_each_pipe(i) {
cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
- error->cursor[i].control = I915_READ(CURCNTR(i));
- error->cursor[i].position = I915_READ(CURPOS(i));
- error->cursor[i].base = I915_READ(CURBASE(i));
+ if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
+ error->cursor[i].control = I915_READ(CURCNTR(i));
+ error->cursor[i].position = I915_READ(CURPOS(i));
+ error->cursor[i].base = I915_READ(CURBASE(i));
+ } else {
+ error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
+ error->cursor[i].position = I915_READ(CURPOS_IVB(i));
+ error->cursor[i].base = I915_READ(CURBASE_IVB(i));
+ }
error->plane[i].control = I915_READ(DSPCNTR(i));
error->plane[i].stride = I915_READ(DSPSTRIDE(i));
- error->plane[i].size = I915_READ(DSPSIZE(i));
- error->plane[i].pos = I915_READ(DSPPOS(i));
- error->plane[i].addr = I915_READ(DSPADDR(i));
+ if (INTEL_INFO(dev)->gen <= 3) {
+ error->plane[i].size = I915_READ(DSPSIZE(i));
+ error->plane[i].pos = I915_READ(DSPPOS(i));
+ }
+ if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
+ error->plane[i].addr = I915_READ(DSPADDR(i));
if (INTEL_INFO(dev)->gen >= 4) {
error->plane[i].surface = I915_READ(DSPSURF(i));
error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
struct drm_device *dev,
struct intel_display_error_state *error)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
int i;
- seq_printf(m, "Num Pipes: %d\n", dev_priv->num_pipe);
+ seq_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
for_each_pipe(i) {
seq_printf(m, "Pipe [%d]:\n", i);
seq_printf(m, " CONF: %08x\n", error->pipe[i].conf);
seq_printf(m, "Plane [%d]:\n", i);
seq_printf(m, " CNTR: %08x\n", error->plane[i].control);
seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
- seq_printf(m, " SIZE: %08x\n", error->plane[i].size);
- seq_printf(m, " POS: %08x\n", error->plane[i].pos);
- seq_printf(m, " ADDR: %08x\n", error->plane[i].addr);
+ if (INTEL_INFO(dev)->gen <= 3) {
+ seq_printf(m, " SIZE: %08x\n", error->plane[i].size);
+ seq_printf(m, " POS: %08x\n", error->plane[i].pos);
+ }
+ if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
+ seq_printf(m, " ADDR: %08x\n", error->plane[i].addr);
if (INTEL_INFO(dev)->gen >= 4) {
seq_printf(m, " SURF: %08x\n", error->plane[i].surface);
seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);