Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
+ Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
*/
/*
- SUPPORTED DEVICES PCI ID
- 82801AA 2413
- 82801AB 2423
- 82801BA 2443
- 82801CA/CAM 2483
- 82801DB 24C3 (HW PEC supported, 32 byte buffer not supported)
- 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported)
- 6300ESB 25A4
- ICH6 266A
- ICH7 27DA
- ESB2 269B
- ICH8 283E
- ICH9 2930
- This driver supports several versions of Intel's I/O Controller Hubs (ICH).
- For SMBus support, they are similar to the PIIX4 and are part
- of Intel's '810' and other chipsets.
- See the file Documentation/i2c/busses/i2c-i801 for details.
- I2C Block Read and Process Call are not supported.
+ Supports the following Intel I/O Controller Hubs (ICH):
+
+ I/O Block I2C
+ region SMBus Block proc. block
+ Chip name PCI ID size PEC buffer call read
+ ----------------------------------------------------------------------
+ 82801AA (ICH) 0x2413 16 no no no no
+ 82801AB (ICH0) 0x2423 16 no no no no
+ 82801BA (ICH2) 0x2443 16 no no no no
+ 82801CA (ICH3) 0x2483 32 soft no no no
+ 82801DB (ICH4) 0x24c3 32 hard yes no no
+ 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ 6300ESB 0x25a4 32 hard yes yes yes
+ 82801F (ICH6) 0x266a 32 hard yes yes yes
+ 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ 82801G (ICH7) 0x27da 32 hard yes yes yes
+ 82801H (ICH8) 0x283e 32 hard yes yes yes
+ 82801I (ICH9) 0x2930 32 hard yes yes yes
+ Tolapai 0x5032 32 hard yes ? ?
+
+ Features supported by this driver:
+ Software PEC no
+ Hardware PEC yes
+ Block buffer yes
+ Block process call transaction no
+ I2C block read transaction yes (doesn't use the block buffer)
+
+ See the file Documentation/i2c/busses/i2c-i801 for details.
*/
/* Note: we assume there can only be one I801, with one SMBus interface */
#define SMBHSTDAT0 (5 + i801_smba)
#define SMBHSTDAT1 (6 + i801_smba)
#define SMBBLKDAT (7 + i801_smba)
-#define SMBPEC (8 + i801_smba) /* ICH4 only */
-#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */
-#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
+#define SMBPEC (8 + i801_smba) /* ICH3 and later */
+#define SMBAUXSTS (12 + i801_smba) /* ICH4 and later */
+#define SMBAUXCTL (13 + i801_smba) /* ICH4 and later */
/* PCI Address Constants */
#define SMBBAR 4
#define I801_BYTE 0x04
#define I801_BYTE_DATA 0x08
#define I801_WORD_DATA 0x0C
-#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */
+#define I801_PROC_CALL 0x10 /* unimplemented */
#define I801_BLOCK_DATA 0x14
-#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */
+#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
#define I801_BLOCK_LAST 0x34
-#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */
+#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */
#define I801_START 0x40
-#define I801_PEC_EN 0x80 /* ICH4 only */
+#define I801_PEC_EN 0x80 /* ICH3 and later */
/* I801 Hosts Status register bits */
#define SMBHSTSTS_BYTE_DONE 0x80
static unsigned char i801_original_hstcfg;
static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
-static int isich4;
-static int i801_transaction(void)
+#define FEATURE_SMBUS_PEC (1 << 0)
+#define FEATURE_BLOCK_BUFFER (1 << 1)
+#define FEATURE_BLOCK_PROC (1 << 2)
+#define FEATURE_I2C_BLOCK_READ (1 << 3)
+static unsigned int i801_features;
+
+static int i801_transaction(int xact)
{
int temp;
int result = 0;
}
}
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT);
/* We will always wait for a fraction of a second! */
do {
outb_p(temp, SMBHSTSTS);
}
-/* All-inclusive block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec)
+static int i801_block_transaction_by_block(union i2c_smbus_data *data,
+ char read_write, int hwpec)
+{
+ int i, len;
+
+ inb_p(SMBHSTCNT); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0);
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT);
+ }
+
+ if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec))
+ return -1;
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0);
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -1;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT);
+ }
+ return 0;
+}
+
+static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
+ char read_write, int command,
+ int hwpec)
{
int i, len;
int smbcmd;
int temp;
int result = 0;
int timeout;
- unsigned char hostc, errmask;
+ unsigned char errmask;
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
- hostc | SMBHSTCFG_I2C_EN);
- } else {
- dev_err(&I801_dev->dev,
- "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
- return -1;
- }
- }
+ len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
outb_p(len, SMBHSTDAT0);
outb_p(data->block[1], SMBBLKDAT);
- } else {
- len = 32; /* max for reads */
- }
-
- if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
- /* set 32 byte buffer */
}
for (i = 1; i <= len; i++) {
- if (i == len && read_write == I2C_SMBUS_READ)
- smbcmd = I801_BLOCK_LAST;
- else
- smbcmd = I801_BLOCK_DATA;
+ if (i == len && read_write == I2C_SMBUS_READ) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA)
+ smbcmd = I801_I2C_BLOCK_LAST;
+ else
+ smbcmd = I801_BLOCK_LAST;
+ } else {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+ }
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
+ "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+ inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
if (i == 1) {
- /* Erronenous conditions before transaction:
+ /* Erroneous conditions before transaction:
* Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
errmask = 0x9f;
} else {
- /* Erronenous conditions during transaction:
+ /* Erroneous conditions during transaction:
* Failed, Bus_Err, Dev_Err, Intr */
errmask = 0x1e;
}
if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
dev_err(&I801_dev->dev,
"Reset failed! (%02x)\n", temp);
- result = -1;
- goto END;
+ return -1;
}
- if (i != 1) {
+ if (i != 1)
/* if die in middle of block transaction, fail */
- result = -1;
- goto END;
- }
+ return -1;
}
if (i == 1)
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
- if (i == 1 && read_write == I2C_SMBUS_READ) {
+ if (i == 1 && read_write == I2C_SMBUS_READ
+ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0);
- if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
- result = -1;
- goto END;
- }
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -1;
data->block[0] = len;
}
temp);
}
dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
+ "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
+ inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
if (result < 0)
- goto END;
+ return result;
}
+ return result;
+}
- if (hwpec)
- i801_wait_hwpec();
+static int i801_set_block_buffer_mode(void)
+{
+ outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
+ if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
+ return -1;
+ return 0;
+}
+
+/* Block transaction function */
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command, int hwpec)
+{
+ int result = 0;
+ unsigned char hostc;
- result = 0;
-END:
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(I801_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&I801_dev->dev,
+ "I2C block read is unsupported!\n");
+ return -1;
+ }
+ }
+
+ if (read_write == I2C_SMBUS_WRITE
+ || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (data->block[0] < 1)
+ data->block[0] = 1;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ data->block[0] = 32; /* max for SMBus block reads */
+ }
+
+ if ((i801_features & FEATURE_BLOCK_BUFFER)
+ && !(command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_READ)
+ && i801_set_block_buffer_mode() == 0)
+ result = i801_block_transaction_by_block(data, read_write,
+ hwpec);
+ else
+ result = i801_block_transaction_byte_by_byte(data, read_write,
+ command, hwpec);
+
+ if (result == 0 && hwpec)
+ i801_wait_hwpec();
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
}
int block = 0;
int ret, xact = 0;
- hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+ hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
&& size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
outb_p(command, SMBHSTCMD);
block = 1;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /* NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD);
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1);
+ } else
+ outb_p(command, SMBHSTCMD);
+ block = 1;
+ break;
case I2C_SMBUS_PROC_CALL:
default:
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
if(block)
ret = i801_block_transaction(data, read_write, size, hwpec);
- else {
- outb_p(xact | ENABLE_INT9, SMBHSTCNT);
- ret = i801_transaction();
- }
+ else
+ ret = i801_transaction(xact | ENABLE_INT9);
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
- time, so we forcibly disable it after every transaction. */
- if (hwpec)
- outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
+ if (hwpec || block)
+ outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
+ SMBAUXCTL);
if(block)
return ret;
static u32 i801_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
- | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((i801_features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
}
static const struct i2c_algorithm smbus_algorithm = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
{ 0, }
};
int err;
I801_dev = dev;
+ i801_features = 0;
switch (dev->device) {
- case PCI_DEVICE_ID_INTEL_82801DB_3:
case PCI_DEVICE_ID_INTEL_82801EB_3:
case PCI_DEVICE_ID_INTEL_ESB_4:
case PCI_DEVICE_ID_INTEL_ICH6_16:
case PCI_DEVICE_ID_INTEL_ESB2_17:
case PCI_DEVICE_ID_INTEL_ICH8_5:
case PCI_DEVICE_ID_INTEL_ICH9_6:
- isich4 = 1;
+ i801_features |= FEATURE_I2C_BLOCK_READ;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
+ i801_features |= FEATURE_SMBUS_PEC;
+ i801_features |= FEATURE_BLOCK_BUFFER;
break;
- default:
- isich4 = 0;
}
err = pci_enable_device(dev);
else
dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+ /* Clear special mode bits */
+ if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
+ SMBAUXCTL);
+
/* set up the sysfs linkage to our parent device */
i801_adapter.dev.parent = &dev->dev;
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
+ "Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
projects / firefly-linux-kernel-4.4.55.git / blobdiff