if INPUT_TOUCHSCREEN
+config TOUCHSCREEN_XPT2046_SPI
+ tristate "XPT2046 based touchscreens:SPI Interface"
+ depends on SPIM_RK29
+
+ config TOUCHSCREEN_XPT2046_NORMAL_SPI
+ tristate "normal mode"
+ depends on TOUCHSCREEN_XPT2046_SPI
+
+ config TOUCHSCREEN_480X800
+ tristate "480X800 resolution"
+ depends on TOUCHSCREEN_XPT2046_NORMAL_SPI
+
+ config TOUCHSCREEN_800X480
+ tristate "800X480 resolution"
+ depends on TOUCHSCREEN_XPT2046_NORMAL_SPI
+
+ config TOUCHSCREEN_320X480
+ tristate "320X480 resolution"
+ depends on TOUCHSCREEN_XPT2046_NORMAL_SPI
+
+ config TOUCHSCREEN_XPT2046_TSLIB_SPI
+ tristate "tslib mode"
+ depends on TOUCHSCREEN_XPT2046_SPI
+
+ config TOUCHSCREEN_480X800
+ tristate "480X800 resolution"
+ depends on TOUCHSCREEN_XPT2046_TSLIB_SPI
+
+ config TOUCHSCREEN_800X480
+ tristate "800X480 resolution"
+ depends on TOUCHSCREEN_XPT2046_TSLIB_SPI
+
+ config TOUCHSCREEN_320X480
+ tristate "320X480 resolution"
+ depends on TOUCHSCREEN_XPT2046_TSLIB_SPI
+
+ config TOUCHSCREEN_XPT2046_CBN_SPI
+ tristate "calibration mode"
+ depends on TOUCHSCREEN_XPT2046_SPI
+
+ config TOUCHSCREEN_480X800
+ tristate "480X800 resolution"
+ depends on TOUCHSCREEN_XPT2046_CBN_SPI
+
+ config TOUCHSCREEN_800X480
+ tristate "800X480 resolution"
+ depends on TOUCHSCREEN_XPT2046_CBN_SPI
+
+ config TOUCHSCREEN_320X480
+ tristate "320X480 resolution"
+ depends on TOUCHSCREEN_XPT2046_CBN_SPI
+
config TOUCHSCREEN_88PM860X
tristate "Marvell 88PM860x touchscreen"
depends on MFD_88PM860X
To compile this driver as a module, choose M here: the
module will be called ad7877.
+config TOUCHSCREEN_ILI2102_IIC
+ tristate "ili2102 based touchscreens: IIC Interface"
+ help
+ Say Y here if you have a touchscreen interface using the
+ hx8520 controller, and your board-specific initialization
+ code includes that in its table of IIC devices.
+
+ If unsure, say N (but it's safe to say "Y").
+config TOUCHSCREEN_GT8XX
+ tristate "Goodix touch screen gt8xx support for rk29"
+ help
+ Say Y here if you have a touchscreen interface using the
+ goodix gt8xx , and your board-specific initialization
+ code includes that in its table of IIC devices.
+ If unsure, say N (but it's safe to say "Y").
+
+config RK28_I2C_TS_NTP070
+ tristate "NTP070 based touchscreens: NTP070 Interface"
+ depends on I2C_RK2818
+
+config TOUCHSCREEN_IT7250
+ tristate "IT7250 based touchscreens: IT7250 Interface"
+ help
+ Say Y here if you have a touchscreen interface using the
+ xpt2046 controller, and your board-specific initialization
+ code includes that in its table of SPI devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
config TOUCHSCREEN_AD7879
tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
help
To compile this driver as a module, choose M here: the
module will be called ad7879-spi.
+config TOUCHSCREEN_ATMEL_MXT
+ tristate "Atmel mXT I2C Touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have Atmel mXT series I2C touchscreen,
+ such as AT42QT602240/ATMXT224, connected to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel_mxt_ts.
+
config TOUCHSCREEN_BITSY
tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
depends on SA1100_BITSY
To compile this driver as a module, choose M here: the
module will be called h3600_ts_input.
+config TOUCHSCREEN_BU21013
+ tristate "BU21013 based touch panel controllers"
+ depends on I2C
+ help
+ Say Y here if you have a bu21013 touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bu21013_ts.
+
config TOUCHSCREEN_CY8CTMG110
tristate "cy8ctmg110 touchscreen"
depends on I2C
To compile this driver as a module, choose M here: the
module will be called wacom_w8001.
+config TOUCHSCREEN_LPC32XX
+ tristate "LPC32XX touchscreen controller"
+ depends on ARCH_LPC32XX
+ help
+ Say Y here if you have a LPC32XX device and want
+ to support the built-in touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lpc32xx_ts.
+
+config TOUCHSCREEN_MAX11801
+ tristate "MAX11801 based touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a MAX11801 based touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called max11801_ts.
+
config TOUCHSCREEN_MCS5000
tristate "MELFAS MCS-5000 touchscreen"
depends on I2C
To compile this driver as a module, choose M here: the
module will be called inexio.
+config TOUCHSCREEN_INTEL_MID
+ tristate "Intel MID platform resistive touchscreen"
+ depends on INTEL_SCU_IPC
+ help
+ Say Y here if you have a Intel MID based touchscreen in
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called intel_mid_touch.
+
config TOUCHSCREEN_MK712
tristate "ICS MicroClock MK712 touchscreen"
help
To compile this driver as a module, choose M here: the
module will be called penmount.
-config TOUCHSCREEN_QT602240
- tristate "QT602240 I2C Touchscreen"
- depends on I2C
- help
- Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
- connected to your system.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called qt602240_ts.
-
config TOUCHSCREEN_MIGOR
tristate "Renesas MIGO-R touchscreen"
depends on SH_MIGOR && I2C
To compile this driver as a module, choose M here: the
module will be called migor_ts.
-config TOUCHSCREEN_PANJIT_I2C
- tristate "PANJIT I2C touchscreen driver"
- depends on I2C
- default n
+config TOUCHSCREEN_TNETV107X
+ tristate "TI TNETV107X touchscreen support"
+ depends on ARCH_DAVINCI_TNETV107X
help
- Say Y here to enable PANJIT I2C capacitive touchscreen support,
- covering devices such as the MGG1010AI06 and EGG1010AI06
-
- If unsure, say N
+ Say Y here if you want to use the TNETV107X touchscreen.
- To compile this driver as a module, choose M here: the module will
- be called panjit_i2c.
+ To compile this driver as a module, choose M here: the
+ module will be called tnetv107x-ts.
config TOUCHSCREEN_SYNAPTICS_I2C_RMI
tristate "Synaptics i2c touchscreen"
To compile this driver as a module, choose M here: the
module will be called ucb1400_ts.
+config TOUCHSCREEN_WM831X
+ tristate "Support for WM831x touchscreen controllers"
+ depends on MFD_WM831X
+ help
+ This enables support for the touchscreen controller on the WM831x
+ series of PMICs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm831x-ts.
+
config TOUCHSCREEN_WM97XX
tristate "Support for WM97xx AC97 touchscreen controllers"
depends on AC97_BUS
config TOUCHSCREEN_USB_EGALAX
default y
- bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
+ bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_PANJIT
default y
- bool "PanJit device support" if EMBEDDED
+ bool "PanJit device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_3M
default y
- bool "3M/Microtouch EX II series device support" if EMBEDDED
+ bool "3M/Microtouch EX II series device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ITM
default y
- bool "ITM device support" if EMBEDDED
+ bool "ITM device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ETURBO
default y
- bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+ bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_GUNZE
default y
- bool "Gunze AHL61 device support" if EMBEDDED
+ bool "Gunze AHL61 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_DMC_TSC10
default y
- bool "DMC TSC-10/25 device support" if EMBEDDED
+ bool "DMC TSC-10/25 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_IRTOUCH
default y
- bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
+ bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_IDEALTEK
default y
- bool "IdealTEK URTC1000 device support" if EMBEDDED
+ bool "IdealTEK URTC1000 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_GENERAL_TOUCH
default y
- bool "GeneralTouch Touchscreen device support" if EMBEDDED
+ bool "GeneralTouch Touchscreen device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_GOTOP
default y
- bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
+ bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_JASTEC
default y
- bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
+ bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_E2I
config TOUCHSCREEN_USB_ZYTRONIC
default y
- bool "Zytronic controller" if EMBEDDED
+ bool "Zytronic controller" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ETT_TC45USB
default y
- bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
+ bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_NEXIO
default y
- bool "NEXIO/iNexio device support" if EMBEDDED
+ bool "NEXIO/iNexio device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_TOUCHIT213
To compile this driver as a module, choose M here: the
module will be called touchit213.
+config TOUCHSCREEN_TSC2005
+ tristate "TSC2005 based touchscreens"
+ depends on SPI_MASTER && GENERIC_HARDIRQS
+ help
+ Say Y here if you have a TSC2005 based touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2005.
+
config TOUCHSCREEN_TSC2007
tristate "TSC2007 based touchscreens"
depends on I2C
To compile this driver as a module, choose M here: the
module will be called pcap_ts.
-config TOUCHSCREEN_TPS6507X
- tristate "TPS6507x based touchscreens"
+config TOUCHSCREEN_ST1232
+ tristate "Sitronix ST1232 touchscreen controllers"
depends on I2C
help
- Say Y here if you have a TPS6507x based touchscreen
- controller.
+ Say Y here if you want to support Sitronix ST1232
+ touchscreen controller.
If unsure, say N.
To compile this driver as a module, choose M here: the
- module will be called tps6507x_ts.
+ module will be called st1232_ts.
config TOUCHSCREEN_STMPE
tristate "STMicroelectronics STMPE touchscreens"
To compile this driver as a module, choose M here: the
module will be called stmpe-ts.
+config TOUCHSCREEN_TPS6507X
+ tristate "TPS6507x based touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a TPS6507x based touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tps6507x_ts.
+
+config HANNSTAR_P1003
+ tristate "Hannstar P1003 touchscreen"
+ depends on I2C2_RK29
+ help
+ RK29 hannstar touch
+
+ config HANNSTAR_MAX_X
+ int "hannstar touch x max"
+ depends on HANNSTAR_P1003
+ default 1087
+ help
+ RK29 hannstar touch max X size
+
+ config HANNSTAR_MAX_Y
+ int "hannstar touch Y max"
+ depends on HANNSTAR_P1003
+ default 800
+ help
+ RK29 hannstar touch max Y size
+
+ config HANNSTAR_DEBUG
+ bool "hannstar debug"
+ depends on HANNSTAR_P1003
+ default n
+ help
+ RK29 hannstar touch debug
+
+config ATMEL_MXT224
+ tristate "Atmel mXT224 touchscreen"
+ depends on I2C2_RK29
+ help
+ RK29 Atmel_mXT224 touch
+
+ config MXT224_MAX_X
+ int "atmel_mxt224 touch X max"
+ depends on ATMEL_MXT224
+ default 4095
+ help
+ RK29 atmel_mxt224 touch max X size
+
+ config MXT224_MAX_Y
+ int "atmel_mxt224 touch Y max"
+ depends on ATMEL_MXT224
+ default 4095
+ help
+ RK29 atmel_mxt224 touch max Y size
+
+config SINTEK_3FA16
+ tristate "Sintek 3FA16 touchscreen"
+ depends on I2C2_RK29
+ help
+ RK29 Sintek touch
+
+ config HANNSTAR_MAX_X
+ int "Sintek touch x max"
+ depends on SINTEK_3FA16
+ default 1024
+ help
+ RK29 hannstar touch max X size
+
+ config HANNSTAR_MAX_Y
+ int "Sintek touch Y max"
+ depends on SINTEK_3FA16
+ default 600
+ help
+ RK29 hannstar touch max Y size
+
+ config HANNSTAR_DEBUG
+ bool "Sintek debug"
+ depends on SINTEK_3FA16
+ default n
+ help
+ RK29 hannstar touch debug
+
+config EETI_EGALAX
+ tristate "EETI_EGALAX touchscreen panel support"
+ depends on I2C
+ help
+ Say Y here to enable support for I2C connected EETI touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called eeti_egalax_ts.
+
+ config EETI_EGALAX_MAX_X
+ int "EETI_EGALAX_MAX_X"
+ depends on EETI_EGALAX
+ default 2047
+ help
+ RK29 EETI_EGALAX touch max X size
+
+ config EETI_EGALAX_MAX_Y
+ int "EETI_EGALAX_MAX_Y"
+ depends on EETI_EGALAX
+ default 2047
+ help
+ RK29 EETI_EGALAX touch max Y size
+
+ config EETI_EGALAX_DEBUG
+ bool "EETI_EGALAX debug"
+ depends on EETI_EGALAX
+ default n
+ help
+ RK29 EETI_EGALAX touch debug
+
+config TOUCHSCREEN_IT7260
+ tristate "IT7260 based touchscreens: IT7260 Interface"
+ depends on I2C2_RK29
+ help
+ Say Y here if you have a touchscreen interface using the
+ it7260 controller, and your board-specific initialization
+ code includes that in its table of I2C devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+config TOUCHSCREEN_IT7260_I2C
+ tristate "IT7260 based touchscreens: IT7260 I2C Interface"
+ depends on I2C_RK29
+ help
+ Say Y here if you have a touchscreen interface using the
+ IT7260 controller, and your board-specific initialization
+ code includes that in its table of I2C devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+config TOUCHSCREEN_NAS
+ tristate "NAS based touchscreens: NAS Interface"
+ depends on I2C2_RK29
+ help
+ Say Y here if you have a touchscreen interface using the
+ nas controller, and your board-specific initialization
+ code includes that in its table of I2C devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+config LAIBAO_TS
+ tristate "LAIBAO touchscreen"
+ depends on I2C2_RK29
+ help
+ RK29 LAIBAO touchscreen
+
+config TOUCHSCREEN_GT801_IIC
+ tristate "GT801_IIC based touchscreens"
+ depends on I2C2_RK29
+
+config TOUCHSCREEN_GT818_IIC
+ tristate "GT818_IIC based touchscreens"
+ depends on I2C2_RK29
+
+config TOUCHSCREEN_PIXCIR
+ tristate "PIXCIR_IIC based touchscreens"
+ depends on I2C2_RK29
+
+config D70_L3188A
+ tristate "D70-L3188A based touchscreens"
+ depends on I2C2_RK29
+
+config TOUCHSCREEN_GT819
+ tristate "GT819 based touchscreens"
+ depends on I2C2_RK29
+
+config TOUCHSCREEN_FT5306
+ tristate "FT5306 based touchscreens: FT5306 Interface"
+ depends on I2C2_RK29
+
+config TOUCHSCREEN_FT5406
+ tristate "FT5406 based touchscreens: FT5406 Interface"
+ depends on I2C2_RK29
+ help
+ say Y here if you have a touchscreen interface using the FT5406
+ controller,and your board-specific initialization code includes that
+ in its table of I2C devices.
+
+ If unsure, say N(but it's safe to say "Y").
+
+config ATMEL_MXT1386
+ tristate "ATMEL_MXT1386 touchscreen panel support"
+ depends on I2C
+ help
+ Say Y here to enable support for I2C connected ATMEL_MXT1386 touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel_mxt1386_ts.
+
+ config ATMEL_MXT1386_MAX_X
+ int "ATMEL_MXT1386_MAX_X"
+ depends on ATMEL_MXT1386
+ default 4095
+ help
+ RK29 ATMEL_MXT1386 touch max X size
+
+ config ATMEL_MXT1386_MAX_Y
+ int "ATMEL_MXT1386_MAX_Y"
+ depends on ATMEL_MXT1386
+ default 4095
+ help
+ RK29 ATMEL_MXT1386 touch max Y size
+
+ config ATMEL_MXT1386_DEBUG
+ bool "ATMEL_MXT1386 debug"
+ depends on ATMEL_MXT1386
+ default n
+ help
+ RK29 ATMEL_MXT1386 touch debug
endif
projects / firefly-linux-kernel-4.4.55.git / blobdiff