#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
-
#include "dvb-bt8xx.h"
-
#include "bt878.h"
+#include "dvb-pll.h"
static int debug;
MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
#define dprintk( args... ) \
- do { \
+ do \
if (debug) printk(KERN_DEBUG args); \
- } while (0)
+ while (0)
+
+#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
static void dvb_bt8xx_task(unsigned long data)
{
unsigned int card_nr;
/* Hmm, n squared. Hope n is small */
- for (card_nr = 0; card_nr < bt878_num; card_nr++) {
+ for (card_nr = 0; card_nr < bt878_num; card_nr++)
if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
return &bt878[card_nr];
- }
return NULL;
}
-
static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
unsigned char bs = 0;
unsigned char cp = 0;
- #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency < 542000000) cp = 0xb4;
- else if (params->frequency < 771000000) cp = 0xbc;
- else cp = 0xf4;
+ if (params->frequency < 542000000)
+ cp = 0xb4;
+ else if (params->frequency < 771000000)
+ cp = 0xbc;
+ else
+ cp = 0xf4;
- if (params->frequency == 0) bs = 0x03;
- else if (params->frequency < 443250000) bs = 0x02;
- else bs = 0x08;
+ if (params->frequency == 0)
+ bs = 0x03;
+ else if (params->frequency < 443250000)
+ bs = 0x02;
+ else
+ bs = 0x08;
pllbuf[0] = 0xc0; // Note: non-linux standard PLL i2c address
pllbuf[1] = div >> 8;
}
static struct mt352_config thomson_dtt7579_config = {
-
.demod_address = 0x0f,
.demod_init = thomson_dtt7579_demod_init,
.pll_set = thomson_dtt7579_pll_set,
static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
- u32 freq = params->frequency;
+ u32 freq = params->frequency;
- int i, a, n, pump;
- u32 band, pll;
+ int i, a, n, pump;
+ u32 band, pll;
+ u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+ 1576000,1718000,1856000,2036000,2150000};
+ u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+ 0x00102000,0x00104000,0x00108000,0x00110000,
+ 0x00120000,0x00140000};
- u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
- 1576000,1718000,1856000,2036000,2150000};
- u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
- 0x00102000,0x00104000,0x00108000,0x00110000,
- 0x00120000,0x00140000};
-
-#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
/* This is really the bit driving the tuner chip cx24108 */
- if(freq<950000) freq=950000; /* kHz */
- if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+ if (freq<950000)
+ freq = 950000; /* kHz */
+ else if (freq>2150000)
+ freq = 2150000; /* satellite IF is 950..2150MHz */
/* decide which VCO to use for the input frequency */
for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
cx24110_pll_write(fe,0x500c0000);
cx24110_pll_write(fe,0x83f1f800);
cx24110_pll_write(fe,pll);
-/* writereg(client,0x56,0x7f);*/
+ //writereg(client,0x56,0x7f);
return 0;
}
static int pinnsat_pll_init(struct dvb_frontend* fe)
{
- return 0;
+ return 0;
}
-
static struct cx24110_config pctvsat_config = {
-
.demod_address = 0x55,
.pll_init = pinnsat_pll_init,
.pll_set = cx24108_pll_set,
};
-
static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
div = (36000000 + params->frequency + 83333) / 166666;
cfg = 0x88;
- if (params->frequency < 175000000) cpump = 2;
- else if (params->frequency < 390000000) cpump = 1;
- else if (params->frequency < 470000000) cpump = 2;
- else if (params->frequency < 750000000) cpump = 2;
- else cpump = 3;
+ if (params->frequency < 175000000)
+ cpump = 2;
+ else if (params->frequency < 390000000)
+ cpump = 1;
+ else if (params->frequency < 470000000)
+ cpump = 2;
+ else if (params->frequency < 750000000)
+ cpump = 2;
+ else
+ cpump = 3;
- if (params->frequency < 175000000) band_select = 0x0e;
- else if (params->frequency < 470000000) band_select = 0x05;
- else band_select = 0x03;
+ if (params->frequency < 175000000)
+ band_select = 0x0e;
+ else if (params->frequency < 470000000)
+ band_select = 0x05;
+ else
+ band_select = 0x03;
data[0] = (div >> 8) & 0x7f;
data[1] = div & 0xff;
data[2] = ((div >> 10) & 0x60) | cfg;
- data[3] = cpump | band_select;
+ data[3] = (cpump << 6) | band_select;
i2c_transfer(card->i2c_adapter, &msg, 1);
return (div * 166666 - 36000000);
}
static struct sp887x_config microtune_mt7202dtf_config = {
-
.demod_address = 0x70,
.pll_set = microtune_mt7202dtf_pll_set,
.request_firmware = microtune_mt7202dtf_request_firmware,
};
-
-
static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
unsigned char bs = 0;
unsigned char cp = 0;
- #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency < 150000000) cp = 0xB4;
- else if (params->frequency < 173000000) cp = 0xBC;
- else if (params->frequency < 250000000) cp = 0xB4;
- else if (params->frequency < 400000000) cp = 0xBC;
- else if (params->frequency < 420000000) cp = 0xF4;
- else if (params->frequency < 470000000) cp = 0xFC;
- else if (params->frequency < 600000000) cp = 0xBC;
- else if (params->frequency < 730000000) cp = 0xF4;
- else cp = 0xFC;
-
- if (params->frequency < 150000000) bs = 0x01;
- else if (params->frequency < 173000000) bs = 0x01;
- else if (params->frequency < 250000000) bs = 0x02;
- else if (params->frequency < 400000000) bs = 0x02;
- else if (params->frequency < 420000000) bs = 0x02;
- else if (params->frequency < 470000000) bs = 0x02;
- else if (params->frequency < 600000000) bs = 0x08;
- else if (params->frequency < 730000000) bs = 0x08;
- else bs = 0x08;
+ if (params->frequency < 150000000)
+ cp = 0xB4;
+ else if (params->frequency < 173000000)
+ cp = 0xBC;
+ else if (params->frequency < 250000000)
+ cp = 0xB4;
+ else if (params->frequency < 400000000)
+ cp = 0xBC;
+ else if (params->frequency < 420000000)
+ cp = 0xF4;
+ else if (params->frequency < 470000000)
+ cp = 0xFC;
+ else if (params->frequency < 600000000)
+ cp = 0xBC;
+ else if (params->frequency < 730000000)
+ cp = 0xF4;
+ else
+ cp = 0xFC;
+
+ if (params->frequency < 150000000)
+ bs = 0x01;
+ else if (params->frequency < 173000000)
+ bs = 0x01;
+ else if (params->frequency < 250000000)
+ bs = 0x02;
+ else if (params->frequency < 400000000)
+ bs = 0x02;
+ else if (params->frequency < 420000000)
+ bs = 0x02;
+ else if (params->frequency < 470000000)
+ bs = 0x02;
+ else if (params->frequency < 600000000)
+ bs = 0x08;
+ else if (params->frequency < 730000000)
+ bs = 0x08;
+ else
+ bs = 0x08;
pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
pllbuf[1] = div >> 8;
}
static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
-
.demod_address = 0x0f,
.demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
.pll_set = advbt771_samsung_tdtc9251dh0_pll_set,
};
-
static struct dst_config dst_config = {
-
.demod_address = 0x55,
};
-
static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
{
struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
*/
/* reset & PRM1,2&4 are outputs */
int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
- if (ret != 0) {
- printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR "
- "(%i)\n", ret);
- }
+ if (ret != 0)
+ printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR (%i)\n", ret);
bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000); /* Reset */
msleep(20);
/* Now set for normal operation */
}
static struct or51211_config or51211_config = {
-
.demod_address = 0x15,
.request_firmware = or51211_request_firmware,
.setmode = or51211_setmode,
.sleep = or51211_sleep,
};
-
static int vp3021_alps_tded4_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
}
static struct nxt6000_config vp3021_alps_tded4_config = {
-
.demod_address = 0x0a,
.clock_inversion = 1,
.pll_set = vp3021_alps_tded4_pll_set,
};
+static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+ mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int digitv_alps_tded4_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+{
+ u32 div;
+ struct dvb_ofdm_parameters *op = ¶ms->u.ofdm;
+
+ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ pllbuf[0] = 0xc2;
+ pllbuf[1] = (div >> 8) & 0x7F;
+ pllbuf[2] = div & 0xFF;
+ pllbuf[3] = 0x85;
+
+ dprintk("frequency %u, div %u\n", params->frequency, div);
+
+ if (params->frequency < 470000000)
+ pllbuf[4] = 0x02;
+ else if (params->frequency > 823000000)
+ pllbuf[4] = 0x88;
+ else
+ pllbuf[4] = 0x08;
+
+ if (op->bandwidth == 8)
+ pllbuf[4] |= 0x04;
+
+ return 0;
+}
+
+static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt)
+{
+ /*
+ * Reset the frontend, must be called before trying
+ * to initialise the MT352 or mt352_attach
+ * will fail. Same goes for the nxt6000 frontend.
+ *
+ */
+
+ int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08);
+ if (ret != 0)
+ printk(KERN_WARNING "digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n", ret);
+
+ /* Pulse the reset line */
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x00); /* Low */
+ msleep(100);
+
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+}
+
+static struct mt352_config digitv_alps_tded4_config = {
+ .demod_address = 0x0a,
+ .demod_init = digitv_alps_tded4_demod_init,
+ .pll_set = digitv_alps_tded4_pll_set,
+};
+
+static int tdvs_tua6034_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
+ u8 buf[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ int err;
+
+ dvb_pll_configure(&dvb_pll_tdvs_tua6034, buf, params->frequency, 0);
+ dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
+ __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
+ if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) {
+ printk(KERN_WARNING "dvb-bt8xx: %s error "
+ "(addr %02x <- %02x, err = %i)\n",
+ __FUNCTION__, buf[0], buf[1], err);
+ if (err < 0)
+ return err;
+ else
+ return -EREMOTEIO;
+ }
+
+ /* Set the Auxiliary Byte. */
+ buf[2] &= ~0x20;
+ buf[2] |= 0x18;
+ buf[3] = 0x50;
+ i2c_transfer(card->i2c_adapter, &msg, 1);
+
+ return 0;
+}
+
+static struct lgdt330x_config tdvs_tua6034_config = {
+ .demod_address = 0x0e,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+ .pll_set = tdvs_tua6034_pll_set,
+};
+
+static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
+{
+ /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
+
+ /* Pulse the reset line */
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
+ msleep(100);
+
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+ msleep(100);
+}
static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
{
struct dst_state* state = NULL;
switch(type) {
-#ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
+ case BTTV_BOARD_DVICO_DVBT_LITE:
card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter);
if (card->fe != NULL) {
card->fe->ops->info.frequency_min = 174000000;
card->fe->ops->info.frequency_max = 862000000;
- break;
}
break;
-#endif
-#ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
+ case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+ lgdt330x_reset(card);
+ card->fe = lgdt330x_attach(&tdvs_tua6034_config, card->i2c_adapter);
+ if (card->fe != NULL)
+ dprintk ("dvb_bt8xx: lgdt330x detected\n");
+ break;
+
+#ifdef BTTV_BOARD_TWINHAN_VP3021
+ case BTTV_BOARD_TWINHAN_VP3021:
#else
- case BTTV_NEBULA_DIGITV:
+ case BTTV_BOARD_NEBULA_DIGITV:
#endif
+ /*
+ * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
+ * this would be a cleaner solution than trying each frontend in turn.
+ */
+
+ /* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */
+ digitv_alps_tded4_reset(card);
card->fe = nxt6000_attach(&vp3021_alps_tded4_config, card->i2c_adapter);
if (card->fe != NULL) {
+ dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n");
break;
}
+
+ /* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */
+ digitv_alps_tded4_reset(card);
+ card->fe = mt352_attach(&digitv_alps_tded4_config, card->i2c_adapter);
+
+ if (card->fe != NULL)
+ dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n");
break;
- case BTTV_AVDVBT_761:
+ case BTTV_BOARD_AVDVBT_761:
card->fe = sp887x_attach(µtune_mt7202dtf_config, card->i2c_adapter);
- if (card->fe != NULL) {
- break;
- }
break;
- case BTTV_AVDVBT_771:
+ case BTTV_BOARD_AVDVBT_771:
card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
if (card->fe != NULL) {
card->fe->ops->info.frequency_min = 174000000;
card->fe->ops->info.frequency_max = 862000000;
- break;
}
break;
- case BTTV_TWINHAN_DST:
+ case BTTV_BOARD_TWINHAN_DST:
/* DST is not a frontend driver !!! */
state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
/* Setup the Card */
/* Attach other DST peripherals if any */
/* Conditional Access device */
- if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
ret = dst_ca_attach(state, &card->dvb_adapter);
- }
- if (card->fe != NULL) {
- break;
- }
break;
- case BTTV_PINNACLESAT:
+ case BTTV_BOARD_PINNACLESAT:
card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter);
- if (card->fe != NULL) {
- break;
- }
break;
- case BTTV_PC_HDTV:
+ case BTTV_BOARD_PC_HDTV:
card->fe = or51211_attach(&or51211_config, card->i2c_adapter);
- if (card->fe != NULL) {
- break;
- }
break;
}
- if (card->fe == NULL) {
+ if (card->fe == NULL)
printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
card->bt->dev->vendor,
card->bt->dev->device,
card->bt->dev->subsystem_vendor,
card->bt->dev->subsystem_device);
- } else {
+ else
if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
printk("dvb-bt8xx: Frontend registration failed!\n");
if (card->fe->ops->release)
card->fe->ops->release(card->fe);
card->fe = NULL;
}
- }
}
static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
{
int result;
- if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
- THIS_MODULE)) < 0) {
+ if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name, THIS_MODULE)) < 0) {
printk("dvb_bt8xx: dvb_register_adapter failed (errno = %d)\n", result);
return result;
-
}
card->dvb_adapter.priv = card;
strncpy(card->card_name, sub->core->name, sizeof(sub->core->name));
card->i2c_adapter = &sub->core->i2c_adap;
- switch(sub->core->type)
- {
- case BTTV_PINNACLESAT:
+ switch(sub->core->type) {
+ case BTTV_BOARD_PINNACLESAT:
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
card->irq_err_ignore = 0;
break;
-#ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
-#endif
+ case BTTV_BOARD_DVICO_DVBT_LITE:
card->gpio_mode = 0x0400C060;
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
* DA_APP(parallel) */
break;
-#ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
+ case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+ card->gpio_mode = 0x0400c060;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ break;
+
+#ifdef BTTV_BOARD_TWINHAN_VP3021
+ case BTTV_BOARD_TWINHAN_VP3021:
#else
- case BTTV_NEBULA_DIGITV:
+ case BTTV_BOARD_NEBULA_DIGITV:
#endif
- case BTTV_AVDVBT_761:
+ case BTTV_BOARD_AVDVBT_761:
card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
/* A_PWRDN DA_SBR DA_APP (high speed serial) */
break;
- case BTTV_AVDVBT_771: //case 0x07711461:
+ case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
card->gpio_mode = 0x0400402B;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = 0;
/* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
break;
- case BTTV_TWINHAN_DST:
+ case BTTV_BOARD_TWINHAN_DST:
card->gpio_mode = 0x2204f2c;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
* RISC+FIFO ENABLE */
break;
- case BTTV_PC_HDTV:
+ case BTTV_BOARD_PC_HDTV:
card->gpio_mode = 0x0100EC7B;
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
kfree(card);
return -EFAULT;
-
}
init_MUTEX(&card->bt->gpio_lock);
card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- if (card->fe) dvb_unregister_frontend(card->fe);
+ if (card->fe)
+ dvb_unregister_frontend(card->fe);
dvb_unregister_adapter(&card->dvb_adapter);
kfree(card);