#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <media/atmel-isi.h>
#define VID_LIMIT_BYTES (16 * 1024 * 1024)
#define MIN_FRAME_RATE 15
#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE)
-#define ISI_DEFAULT_MCLK_FREQ 25000000
/* Frame buffer descriptor */
struct fbd {
struct completion complete;
/* ISI peripherial clock */
struct clk *pclk;
- /* ISI_MCK, feed to camera sensor to generate pixel clock */
- struct clk *mck;
unsigned int irq;
struct isi_platform_data pdata;
struct atmel_isi *isi = ici->priv;
int ret;
+ pm_runtime_get_sync(ici->v4l2_dev.dev);
+
/* Reset ISI */
ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
if (ret < 0) {
dev_err(icd->parent, "Reset ISI timed out\n");
+ pm_runtime_put(ici->v4l2_dev.dev);
return ret;
}
/* Disable all interrupts */
time_before(jiffies, timeout))
msleep(1);
- if (time_after(jiffies, timeout)) {
+ if (time_after(jiffies, timeout))
dev_err(icd->parent,
"Timeout waiting for finishing codec request\n");
- return;
- }
/* Disable interrupts */
isi_writel(isi, ISI_INTDIS,
ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
if (ret < 0)
dev_err(icd->parent, "Disable ISI timed out\n");
+
+ pm_runtime_put(ici->v4l2_dev.dev);
}
static struct vb2_ops isi_video_qops = {
if (mf->code != xlate->code)
return -EINVAL;
+ /* Enable PM and peripheral clock before operate isi registers */
+ pm_runtime_get_sync(ici->v4l2_dev.dev);
+
ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
+
+ pm_runtime_put(ici->v4l2_dev.dev);
+
if (ret < 0)
return ret;
icd->devnum);
}
-/* Called with .host_lock held */
-static int isi_camera_clock_start(struct soc_camera_host *ici)
-{
- struct atmel_isi *isi = ici->priv;
- int ret;
-
- ret = clk_prepare_enable(isi->pclk);
- if (ret)
- return ret;
-
- if (!IS_ERR(isi->mck)) {
- ret = clk_prepare_enable(isi->mck);
- if (ret) {
- clk_disable_unprepare(isi->pclk);
- return ret;
- }
- }
-
- return 0;
-}
-
-/* Called with .host_lock held */
-static void isi_camera_clock_stop(struct soc_camera_host *ici)
-{
- struct atmel_isi *isi = ici->priv;
-
- if (!IS_ERR(isi->mck))
- clk_disable_unprepare(isi->mck);
- clk_disable_unprepare(isi->pclk);
-}
-
static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
{
struct soc_camera_device *icd = file->private_data;
cfg1 |= ISI_CFG1_THMASK_BEATS_16;
+ /* Enable PM and peripheral clock before operate isi registers */
+ pm_runtime_get_sync(ici->v4l2_dev.dev);
+
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
isi_writel(isi, ISI_CFG1, cfg1);
+ pm_runtime_put(ici->v4l2_dev.dev);
+
return 0;
}
.owner = THIS_MODULE,
.add = isi_camera_add_device,
.remove = isi_camera_remove_device,
- .clock_start = isi_camera_clock_start,
- .clock_stop = isi_camera_clock_stop,
.set_fmt = isi_camera_set_fmt,
.try_fmt = isi_camera_try_fmt,
.get_formats = isi_camera_get_formats,
sizeof(struct fbd) * MAX_BUFFER_NUM,
isi->p_fb_descriptors,
isi->fb_descriptors_phys);
+ pm_runtime_disable(&pdev->dev);
return 0;
}
/* Default settings for ISI */
isi->pdata.full_mode = 1;
- isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
np = of_graph_get_next_endpoint(np, NULL);
INIT_LIST_HEAD(&isi->video_buffer_list);
INIT_LIST_HEAD(&isi->dma_desc_head);
- /* ISI_MCK is the sensor master clock. It should be handled by the
- * sensor driver directly, as the ISI has no use for that clock. Make
- * the clock optional here while platforms transition to the correct
- * model.
- */
- isi->mck = devm_clk_get(dev, "isi_mck");
- if (!IS_ERR(isi->mck)) {
- /* Set ISI_MCK's frequency, it should be faster than pixel
- * clock.
- */
- ret = clk_set_rate(isi->mck, isi->pdata.mck_hz);
- if (ret < 0)
- return ret;
- }
-
isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
sizeof(struct fbd) * MAX_BUFFER_NUM,
&isi->fb_descriptors_phys,
if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10)
isi->width_flags |= 1 << 9;
- isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
-
irq = platform_get_irq(pdev, 0);
if (IS_ERR_VALUE(irq)) {
ret = irq;
soc_host->v4l2_dev.dev = &pdev->dev;
soc_host->nr = pdev->id;
+ pm_suspend_ignore_children(&pdev->dev, true);
+ pm_runtime_enable(&pdev->dev);
+
if (isi->pdata.asd_sizes) {
soc_host->asd = isi->pdata.asd;
soc_host->asd_sizes = isi->pdata.asd_sizes;
return 0;
err_register_soc_camera_host:
+ pm_runtime_disable(&pdev->dev);
err_req_irq:
err_ioremap:
vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
return ret;
}
+static int atmel_isi_runtime_suspend(struct device *dev)
+{
+ struct soc_camera_host *soc_host = to_soc_camera_host(dev);
+ struct atmel_isi *isi = container_of(soc_host,
+ struct atmel_isi, soc_host);
+
+ clk_disable_unprepare(isi->pclk);
+
+ return 0;
+}
+static int atmel_isi_runtime_resume(struct device *dev)
+{
+ struct soc_camera_host *soc_host = to_soc_camera_host(dev);
+ struct atmel_isi *isi = container_of(soc_host,
+ struct atmel_isi, soc_host);
+
+ return clk_prepare_enable(isi->pclk);
+}
+
+static const struct dev_pm_ops atmel_isi_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend,
+ atmel_isi_runtime_resume, NULL)
+};
+
static const struct of_device_id atmel_isi_of_match[] = {
{ .compatible = "atmel,at91sam9g45-isi" },
{ }
.driver = {
.name = "atmel_isi",
.of_match_table = of_match_ptr(atmel_isi_of_match),
+ .pm = &atmel_isi_dev_pm_ops,
},
};