additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_BCM590XX
+ tristate "Broadcom BCM590xx PMUs"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Support for the BCM590xx PMUs from Broadcom
+
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
config MFD_CROS_EC_SPI
tristate "ChromeOS Embedded Controller (SPI)"
- depends on MFD_CROS_EC && SPI
+ depends on MFD_CROS_EC && SPI && OF
---help---
If you say Y here, you get support for talking to the ChromeOS EC
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
usually found on PXA processors-based platforms. This includes
the I2C driver and the core APIs _only_, you have to select
Additional drivers must be enabled in order to use the functionality
of the device.
-config MFD_MC13783
- tristate
-
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)
select MFD_CORE
- select MFD_MC13783
help
Enable support for the Freescale MC13783 and MC13892 PMICs.
This driver provides common support for accessing the device,
device may provide functions like watchdog, GPIO, UART and I2C bus.
The following modules are supported:
+ * COMe-bHL6
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
+ * COMe-cBT6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
+ * COMe-cHL6
* COMe-cPC2 (microETXexpress-PC)
+ * COMe-mBT10
* COMe-mCT10
+ * COMe-mTT10 (nanoETXexpress-TT)
* ETX-OH
This driver can also be built as a module. If so, the module
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
+config MFD_MAX14577
+ bool "Maxim Semiconductor MAX14577 MUIC + Charger Support"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select IRQ_DOMAIN
+ help
+ Say yes here to add support for Maxim Semiconductor MAX14577.
+ This is a Micro-USB IC with Charger controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX77686
bool "Maxim Semiconductor MAX77686 PMIC Support"
depends on I2C=y
select REGMAP_I2C
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX77686.
+ Say yes here to add support for Maxim Semiconductor MAX77686.
This is a Power Management IC with RTC on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
select MFD_CORE
select REGMAP_I2C
help
- Say yes here to support for Maxim Semiconductor MAX77693.
+ Say yes here to add support for Maxim Semiconductor MAX77693.
This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
select REGMAP_I2C
select REGMAP_IRQ
help
- Say yes here to support for Maxim Semiconductor MAX8907. This is
+ Say yes here to add support for Maxim Semiconductor MAX8907. This is
a Power Management IC. This driver provides common support for
accessing the device; additional drivers must be enabled in order
to use the functionality of the device.
depends on I2C=y
select MFD_CORE
help
- Say yes here to support for Maxim Semiconductor MAX8925. This is
+ Say yes here to add support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ Say yes here to add support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
MUIC controls on chip.
This driver provides common support for accessing the device;
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8998 and
+ Say yes here to add support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
config MFD_PM8921_CORE
tristate "Qualcomm PM8921 PMIC chip"
- depends on (ARCH_MSM || HEXAGON)
- depends on BROKEN
+ depends on (ARM || HEXAGON)
+ select IRQ_DOMAIN
select MFD_CORE
select MFD_PM8XXX
+ select REGMAP
help
If you say yes to this option, support will be included for the
built-in PM8921 PMIC chip.
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
-config MFD_PM8XXX_IRQ
- bool "Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
-
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
types of memory cards, such as Memory Stick, Memory Stick Pro,
Secure Digital and MultiMediaCard.
+config MFD_RTSX_USB
+ tristate "Realtek USB card reader"
+ depends on USB
+ select MFD_CORE
+ help
+ Select this option to get support for Realtek USB 2.0 card readers
+ including RTS5129, RTS5139, RTS5179 and RTS5170.
+ Realtek card reader supports access to many types of memory cards,
+ such as Memory Stick Pro, Secure Digital and MultiMediaCard.
+
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C=y
boards. MSP430 firmware manages resets and power sequencing,
inputs from buttons and the IR remote, LEDs, an RTC, and more.
+config MFD_LP3943
+ tristate "TI/National Semiconductor LP3943 MFD Driver"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Support for the TI/National Semiconductor LP3943.
+ This driver consists of GPIO and PWM drivers.
+ With these functionalities, it can be used for LED string control or
+ general usage such like a GPIO controller and a PWM controller.
+
config MFD_LP8788
bool "TI LP8788 Power Management Unit Driver"
depends on I2C=y
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
-config MFD_TI_SSP
- tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X
- select MFD_CORE
- ---help---
- Say Y here if you want support for the Sequencer Serial Port
- in a Texas Instruments TNETV107X SoC.
-
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp.
-
config TPS6105X
tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_TPS65218
+ tristate "TI TPS65218 Power Management chips"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ If you say yes here you get support for the TPS65218 series of
+ Power Management chips.
+ These include voltage regulators, gpio and other features
+ that are often used in portable devices. Only regulator
+ component is currently supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65218.
+
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
depends on I2C=y
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
-config TWL4030_MADC
- tristate "TI TWL4030 MADC"
- depends on TWL4030_CORE
- help
- This driver provides support for triton TWL4030-MADC. The
- driver supports both RT and SW conversion methods.
-
- This driver can be built as a module. If so it will be
- named twl4030-madc
-
config TWL4030_POWER
bool "TI TWL4030 power resources"
depends on TWL4030_CORE && ARM
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
-endmenu
-endif
-
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
+
+endmenu
+endif