This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
-config MFD_SH_MOBILE_SDHI
- bool "Support for SuperH Mobile SDHI"
- depends on SUPERH || ARCH_SHMOBILE
- select MFD_CORE
- select TMIO_MMC_DMA
- ---help---
- This driver supports the SDHI hardware block found in many
- SuperH Mobile SoCs.
-
config MFD_DAVINCI_VOICECODEC
tristate
select MFD_CORE
config MFD_DM355EVM_MSP
bool "DaVinci DM355 EVM microcontroller"
- depends on I2C && MACH_DAVINCI_DM355_EVM
+ depends on I2C=y && MACH_DAVINCI_DM355_EVM
help
This driver supports the MSP430 microcontroller used on these
boards. MSP430 firmware manages resets and power sequencing,
inputs from buttons and the IR remote, LEDs, an RTC, and more.
+config MFD_TI_SSP
+ tristate "TI Sequencer Serial Port support"
+ depends on ARCH_DAVINCI_TNETV107X
+ select MFD_CORE
+ ---help---
+ Say Y here if you want support for the Sequencer Serial Port
+ in a Texas Instruments TNETV107X SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti-ssp.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+config TPS6105X
+ tristate "TPS61050/61052 Boost Converters"
+ depends on I2C
+ select REGULATOR
+ select MFD_CORE
+ select REGULATOR_FIXED_VOLTAGE
+ help
+ This option enables a driver for the TP61050/TPS61052
+ high-power "white LED driver". This boost converter is
+ sometimes used for other things than white LEDs, and
+ also contains a GPIO pin.
+
config TPS65010
tristate "TPS6501x Power Management chips"
depends on I2C && GPIOLIB
This driver can also be built as a module. If so, the module
will be called tps6507x.
+config MFD_TPS6586X
+ bool "TPS6586x Power Management chips"
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ If you say yes here you get support for the TPS6586X series of
+ Power Management chips.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps6586x.
+
+config MFD_TPS65910
+ bool "TPS65910 Power Management chip"
+ depends on I2C=y && GPIOLIB
+ select MFD_CORE
+ select GPIO_TPS65910
+ select REGMAP_I2C
+ help
+ if you say yes here you get support for the TPS65910 series of
+ Power Management chips.
+
+config MFD_TPS65912
+ bool
+ depends on GPIOLIB
+
+config MFD_TPS65912_I2C
+ bool "TPS65912 Power Management chip with I2C"
+ select MFD_CORE
+ select MFD_TPS65912
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips with I2C interface.
+
+config MFD_TPS65912_SPI
+ bool "TPS65912 Power Management chip with SPI"
+ select MFD_CORE
+ select MFD_TPS65912
+ depends on SPI_MASTER && GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips with SPI interface.
config MENELAUS
bool "Texas Instruments TWL92330/Menelaus PM chip"
depends on I2C=y && ARCH_OMAP2
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
+config TWL6030_POWER
+ bool "Support power resources on TWL6030 family chips"
+ depends on TWL4030_CORE
+ help
+ Say yes here if you want to use the power resources on the
+ TWL6030 family chips. Most of these resources are regulators,
+ which have a separate driver; some are control signals, such
+ as clock request handshaking.
+
+ This driver defaults to assuming only APPs processor uses
+ the resource, it can however be overridden by board file
+
+config TWL4030_MADC
+ tristate "Texas Instruments TWL4030 MADC"
+ depends on TWL4030_CORE
+ help
+ This driver provides support for triton TWL4030-MADC. The
+ driver supports both RT and SW conversion methods.
+
+ This driver can be built as a module. If so it will be
+ named twl4030-madc
+
config TWL4030_POWER
bool "Support power resources on TWL4030 family chips"
depends on TWL4030_CORE && ARM
as clock request handshaking.
This driver uses board-specific data to initialize the resources
- and load scripts controling which resources are switched off/on
+ and load scripts controlling which resources are switched off/on
or reset when a sleep, wakeup or warm reset event occurs.
-config TPS65910_CORE
- bool "Texas Instruments TPS65910 Support"
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Say yes here if you have TPS65910 family chip on your board.
- This core driver provides register access and registers devices
- for the various functions so that function-specific drivers can
- bind to them.
-
- These multi-function chips are found on many AM35xx boards,
- providing power management, RTC, GPIO features.
-
config TWL4030_CODEC
bool
depends on TWL4030_CORE
Say yes here if you want support for TWL6030 PWM.
This is used to control charging LED brightness.
+config TWL6030_POWEROFF
+ bool "TWL6030 device poweroff"
+ depends on TWL4030_CORE
+
+config TWL6030_MADC
+ tristate "Texas Instruments TWL6030 MADC"
+ depends on TWL4030_CORE
+ help
+ This driver provides support for TWL6030-MADC. The
+ driver supports both RT and SW conversion methods.
+
+ This driver can be built as a module. If so it will be
+ named twl6030-madc
+
+config TWL6030_GPADC
+ tristate "TWL6030 GPADC (General Purpose A/D Convertor) Support"
+ depends on TWL4030_CORE
+ default n
+ help
+ Say yes here if you want support for the TWL6030 General Purpose
+ A/D Convertor.
+
+config AIC3262_CODEC
+ bool "Support TI Codec Aic3262"
+ select MFD_CORE
+ default n
+
config MFD_STMPE
bool "Support STMicroelectronics STMPE"
depends on I2C=y && GENERIC_HARDIRQS
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
-config MFD_TC35892
- bool "Support Toshiba TC35892"
+config MFD_TC3589X
+ bool "Support Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
- Support for the Toshiba TC35892 I/O Expander.
+ Support for the Toshiba TC35892 and variants I/O Expander.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
bool
default n
-config TMIO_MMC_DMA
- bool
- select DMA_ENGINE
- select DMADEVICES
-
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
depends on ARM && HAVE_CLK
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
+config MFD_MAX8997
+ bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX8998/8966.
+ This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
+ MUIC controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX8998
- bool "Maxim Semiconductor MAX8998 PMIC Support"
- depends on I2C=y
+ bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
- Say yes here to support for Maxim Semiconductor MAX8998. This is
- a Power Management IC. This driver provies common support for
- accessing the device, additional drivers must be enabled in order
- to use the functionality of the device.
+ Say yes here to support for Maxim Semiconductor MAX8998 and
+ National Semiconductor LP3974. This is a Power Management IC.
+ This driver provies common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
when controlled using SPI. This driver provides common support
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
-
+
config MFD_WM8350
bool
depends on GENERIC_HARDIRQS
facilities, and registers devices for the various functions
so that function-specific drivers can bind to them.
-config MFD_MC13783
- tristate "Support Freescale MC13783"
- depends on SPI_MASTER
- select MFD_CORE
- help
- Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
config PCF50633_ADC
tristate "Support for NXP PCF50633 ADC"
depends on MFD_PCF50633
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
+config MFD_MC13783
+ tristate
+
+config MFD_MC13XXX
+ tristate "Support Freescale MC13783 and MC13892"
+ depends on SPI_MASTER
+ select MFD_CORE
+ select MFD_MC13783
+ help
+ Support for the Freescale (Atlas) PMIC and audio CODECs
+ MC13783 and MC13892.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config ABX500_CORE
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
- default y if ARCH_U300
+ default y if ARCH_U300 || ARCH_U8500
help
Say yes here if you have the ABX500 Mixed Signal IC family
chips. This core driver expose register access functions.
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on I2C=y && ABX500_CORE
+ select MFD_CORE
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on SPI=y && GENERIC_HARDIRQS
+ depends on GENERIC_HARDIRQS && ABX500_CORE
select MFD_CORE
help
Select this option to enable access to AB8500 power management
- chip. This connects to U8500 on the SSP/SPI bus and exports
- read/write functions for the devices to get access to this chip.
+ chip. This connects to U8500 either on the SSP/SPI bus (deprecated
+ since hardware version v1.0) or the I2C bus via PRCMU. It also adds
+ the irq_chip parts for handling the Mixed Signal chip events.
This chip embeds various other multimedia funtionalities as well.
+config AB8500_I2C_CORE
+ bool "AB8500 register access via PRCMU I2C"
+ depends on AB8500_CORE && MFD_DB8500_PRCMU
+ default y
+ help
+ This enables register access to the AB8500 chip via PRCMU I2C.
+ The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
+ the I2C bus is connected to the Power Reset
+ and Mangagement Unit, PRCMU.
+
+config AB8500_DEBUG
+ bool "Enable debug info via debugfs"
+ depends on AB8500_CORE && DEBUG_FS
+ default y if DEBUG_FS
+ help
+ Select this option if you want debug information using the debug
+ filesystem, debugfs.
+
+config AB8500_GPADC
+ bool "AB8500 GPADC driver"
+ depends on AB8500_CORE && REGULATOR_AB8500
+ default y
+ help
+ AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
+
config AB3550_CORE
bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
select MFD_CORE
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
+config MFD_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB8500
+ select MFD_CORE
+ help
+ Select this option to enable support for the DB8500 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
+
+config MFD_DB5500_PRCMU
+ bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB5500
+ select MFD_CORE
+ help
+ Select this option to enable support for the DB5500 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
+
+config MFD_CS5535
+ tristate "Support for CS5535 and CS5536 southbridge core functions"
+ select MFD_CORE
+ depends on PCI && X86
+ ---help---
+ This is the core driver for CS5535/CS5536 MFD functions. This is
+ necessary for using the board's GPIO and MFGPT functionality.
+
config MFD_TIMBERDALE
tristate "Support for the Timberdale FPGA"
select MFD_CORE
southbridge which provides access to GPIOs and Watchdog using the
southbridge PCI device configuration space.
-config MFD_CPCAP
- tristate "Support for CPCAP"
- depends on SPI && FIRMWARE_IN_KERNEL
- help
- Say yes here if you want to include drivers for the CPCAP chip.
-
config MFD_JANZ_CMODIO
tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
Say yes here if you want support for the ADC unit in the JZ4740 SoC.
This driver is necessary for jz4740-battery and jz4740-hwmon driver.
-config MFD_TPS6586X
- bool "TPS6586x Power Management chips"
- depends on I2C && GPIOLIB && GENERIC_HARDIRQS
+config MFD_VX855
+ tristate "Support for VIA VX855/VX875 integrated south bridge"
+ depends on PCI
select MFD_CORE
help
- If you say yes here you get support for the TPS6586X series of
+ Say yes here to enable support for various functions of the
+ VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
+ and/or vx855_gpio drivers for this to do anything useful.
+
+config MFD_WL1273_CORE
+ tristate "Support for TI WL1273 FM radio."
+ depends on I2C
+ select MFD_CORE
+ default n
+ help
+ This is the core driver for the TI WL1273 FM radio. This MFD
+ driver connects the radio-wl1273 V4L2 module and the wl1273
+ audio codec.
+
+config MFD_OMAP_USB_HOST
+ bool "Support OMAP USBHS core driver"
+ depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+ default y
+ help
+ This is the core driver for the OAMP EHCI and OHCI drivers.
+ This MFD driver does the required setup functionalities for
+ OMAP USB Host drivers.
+
+config MFD_PM8XXX
+ tristate
+
+config MFD_PM8921_CORE
+ tristate "Qualcomm PM8921 PMIC chip"
+ depends on MSM_SSBI
+ select MFD_CORE
+ select MFD_PM8XXX
+ help
+ If you say yes to this option, support will be included for the
+ built-in PM8921 PMIC chip.
+
+ This is required if your board has a PM8921 and uses its features,
+ such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+
+ Say M here if you want to include support for PM8921 chip as a module.
+ This will build a module called "pm8921-core".
+
+config MFD_PM8XXX_IRQ
+ bool "Support for Qualcomm PM8xxx IRQ features"
+ depends on MFD_PM8XXX
+ default y if MFD_PM8XXX
+ help
+ This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+
+ This is required to use certain other PM 8xxx features, such as GPIO
+ and MPP.
+
+config TPS65911_COMPARATOR
+ tristate
+
+config MFD_TPS65090
+ bool "TPS65090 Power Management chips"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the TPS65090 series of
Power Management chips.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
- This driver can also be built as a module. If so, the module
- will be called tps6586x.
-
+config MFD_RK610
+ bool "RK610(Jetta) Multimedia support"
+ depends on I2C=y && GPIOLIB
+ select MFD_CORE
+ help
+ if you say yes here you get support for the RK610, with func as
+ HDMI LCD LVDS TVOUT CODEC.
endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
projects / firefly-linux-kernel-4.4.55.git / blobdiff