select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the AS3711 PMIC from AMS
config MFD_AAT2870_CORE
bool "AnalogicTech AAT2870"
select MFD_CORE
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the AAT2870.
This driver provides common support for accessing the device,
config MFD_ASIC3
bool "Compaq ASIC3"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ depends on GPIOLIB && ARM
select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
select REGMAP_SPI
select REGMAP_IRQ
select PMIC_DA9052
- depends on SPI_MASTER=y && GENERIC_HARDIRQS
+ depends on SPI_MASTER=y
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using SPI. This driver provides common support
select REGMAP_I2C
select REGMAP_IRQ
select PMIC_DA9052
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the Dialog Semiconductor DA9052 PMIC
when controlled using I2C. This driver provides common support
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Say yes here for support of Dialog Semiconductor DA9055. This is
a Power Management IC. This driver provides common support for
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
This includes the I2C driver and core APIs.
config MFD_MC13XXX
tristate
- depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+ depends on (SPI_MASTER || I2C)
select MFD_CORE
select MFD_MC13783
help
config MFD_MC13XXX_SPI
tristate "Freescale MC13783 and MC13892 SPI interface"
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
select REGMAP_SPI
select MFD_MC13XXX
help
config MFD_MC13XXX_I2C
tristate "Freescale MC13892 I2C interface"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select REGMAP_I2C
select MFD_MC13XXX
help
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ depends on GPIOLIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
select MFD_CORE
- depends on GENERIC_HARDIRQS
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
config LPC_ICH
tristate "Intel ICH LPC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
The LPC bridge function of the Intel ICH provides support for
config LPC_SCH
tristate "Intel SCH LPC"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
LPC bridge function of the Intel SCH provides support for
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
This is the core driver for the Janz CMOD-IO PCI MODULbus
carrier board. This device is a PCI to MODULbus bridge which may
config MFD_88PM800
tristate "Marvell 88PM800"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
config MFD_88PM805
tristate "Marvell 88PM805"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
config MFD_88PM860X
bool "Marvell 88PM8606/88PM8607"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select MFD_CORE
help
config MFD_MAX77686
bool "Maxim Semiconductor MAX77686 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
config MFD_MAX77693
bool "Maxim Semiconductor MAX77693 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config MFD_MAX8907
tristate "Maxim Semiconductor MAX8907 PMIC Support"
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
select REGMAP_IRQ
help
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
config MFD_MAX8997
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select IRQ_DOMAIN
help
config MFD_MAX8998
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select IRQ_DOMAIN
help
config EZX_PCAP
bool "Motorola EZXPCAP Support"
- depends on GENERIC_HARDIRQS && SPI_MASTER
+ depends on SPI_MASTER
help
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
config MFD_VIPERBOARD
tristate "Nano River Technologies Viperboard"
select MFD_CORE
- depends on USB && GENERIC_HARDIRQS
+ depends on USB
default n
help
Say yes here if you want support for Nano River Technologies
config MFD_RETU
tristate "Nokia Retu and Tahvo multi-function device"
select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select REGMAP_IRQ
help
Retu and Tahvo are a multi-function devices found on Nokia
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
help
Say yes here if you want to have support for the RDC R-321x SoC
southbridge which provides access to GPIOs and Watchdog using the
config MFD_RTSX_PCI
tristate "Realtek PCI-E card reader"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
This supports for Realtek PCI-Express card reader including rts5209,
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config MFD_SEC_CORE
bool "SAMSUNG Electronics PMIC Series Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config MFD_SMSC
bool "SMSC ECE1099 series chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
+ depends on I2C=y && ABX500_CORE
select MFD_CORE
default y if ARCH_U300
help
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ depends on ABX500_CORE && MFD_DB8500_PRCMU
select POWER_SUPPLY
select MFD_CORE
select IRQ_DOMAIN
config MFD_STMPE
bool "STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+ depends on (I2C=y || SPI_MASTER=y)
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
config MFD_STA2X11
bool "STMicroelectronics STA2X11"
- depends on STA2X11 && GENERIC_HARDIRQS
+ depends on STA2X11
select MFD_CORE
select REGMAP_MMIO
select MFD_CORE
select REGMAP
select REGMAP_MMIO
- depends on GENERIC_HARDIRQS
help
If you say yes here you get support for Texas Instruments series
of Touch Screen /ADC chips.
config MFD_LP8788
bool "TI LP8788 Power Management Unit Driver"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select IRQ_DOMAIN
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
config MFD_TI_SSP
tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ depends on ARCH_DAVINCI_TNETV107X
select MFD_CORE
---help---
Say Y here if you want support for the Sequencer Serial Port
select REGULATOR
select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
- depends on GENERIC_HARDIRQS
help
This option enables a driver for the TP61050/TPS61052
high-power "white LED driver". This boost converter is
config TPS6507X
tristate "TI TPS6507x Power Management / Touch Screen chips"
select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
If you say yes here you get support for the TPS6507x series of
Power Management / Touch Screen chips. These include voltage
config MFD_TPS65090
bool "TI TPS65090 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config MFD_TPS65217
tristate "TI TPS65217 Power Management / White LED chips"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select MFD_CORE
select REGMAP_I2C
help
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
help
config MFD_TPS65910
bool "TI TPS65910 Power Management chip"
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
bool "TI TPS65912 Power Management chip with I2C"
select MFD_CORE
select MFD_TPS65912
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the TPS65912 series of
PM chips with I2C interface.
bool "TI TPS65912 Power Management chip with SPI"
select MFD_CORE
select MFD_TPS65912
- depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
+ depends on SPI_MASTER && GPIOLIB
help
If you say yes here you get support for the TPS65912 series of
PM chips with SPI interface.
config MFD_TPS80031
bool "TI TPS80031/TPS80032 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config TWL4030_CORE
bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select IRQ_DOMAIN
select REGMAP_I2C
help
config MFD_TWL4030_AUDIO
bool "TI TWL4030 Audio"
- depends on TWL4030_CORE && GENERIC_HARDIRQS
+ depends on TWL4030_CORE
select MFD_CORE
default n
config TWL6040_CORE
bool "TI TWL6040 audio codec"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
config MFD_WL1273_CORE
tristate "TI WL1273 FM radio"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
select MFD_CORE
default n
help
depends on I2C
select MFD_CORE
select REGMAP_I2C
- depends on GENERIC_HARDIRQS
help
Say yes here to enable support for National Semiconductor / TI
LM3533 Lighting Power chips.
config MFD_TC3589X
bool "Toshiba TC35892 and variants"
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select MFD_CORE
help
Support for the Toshiba TC35892 and variants I/O Expander.
config MFD_T7L66XB
bool "Toshiba T7L66XB"
- depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
+ depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
help
config MFD_VX855
tristate "VIA VX855/VX875 integrated south bridge"
- depends on PCI && GENERIC_HARDIRQS
+ depends on PCI
select MFD_CORE
help
Say yes here to enable support for various functions of the
select MFD_ARIZONA
select MFD_CORE
select REGMAP_I2C
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
select MFD_ARIZONA
select MFD_CORE
select REGMAP_SPI
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Support for the Wolfson Microelectronics Arizona platform audio SoC
core functionality controlled via I2C.
config MFD_WM8400
bool "Wolfson Microelectronics WM8400"
select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
config MFD_WM831X
bool
- depends on GENERIC_HARDIRQS
config MFD_WM831X_I2C
bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
select MFD_WM831X
select REGMAP_I2C
select IRQ_DOMAIN
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
when controlled using I2C. This driver provides common support
select MFD_WM831X
select REGMAP_SPI
select IRQ_DOMAIN
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
when controlled using SPI. This driver provides common support
config MFD_WM8350
bool
- depends on GENERIC_HARDIRQS
config MFD_WM8350_I2C
bool "Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
The WM8350 is an integrated audio and power management
subsystem with watchdog and RTC functionality for embedded
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
+ depends on I2C=y
help
The WM8994 is a highly integrated hi-fi CODEC designed for
smartphone applicatiosn. As well as audio functionality it