int use_spi_crc = 1;
module_param(use_spi_crc, bool, 0);
+/*
+ * We normally treat cards as removed during suspend if they are not
+ * known to be on a non-removable bus, to avoid the risk of writing
+ * back data to a different card after resume. Allow this to be
+ * overridden if necessary.
+ */
+#ifdef CONFIG_MMC_UNSAFE_RESUME
+int mmc_assume_removable;
+#else
+int mmc_assume_removable = 1;
+#endif
+module_param_named(removable, mmc_assume_removable, bool, 0644);
+MODULE_PARM_DESC(
+ removable,
+ "MMC/SD cards are removable and may be removed during suspend");
+
/*
* Internal function. Schedule delayed work in the MMC work queue.
*/
mmc_start_request(host, mrq);
+#if defined(CONFIG_SDMMC_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+ wait_for_completion_timeout(&complete,HZ*3); //for cmd dead. Modifyed by xbw at 2011-06-02
+#else
wait_for_completion(&complete);
+#endif
}
EXPORT_SYMBOL(mmc_wait_for_req);
/* If the host is claimed then we do not want to disable it anymore */
if (!mmc_try_claim_host(host))
- return;
+ goto out;
mmc_host_do_disable(host, 1);
mmc_do_release_host(host);
+
+out:
+ wake_unlock(&mmc_delayed_work_wake_lock);
}
/**
*/
mmc_delay(10);
- if (host->f_min > 400000) {
- pr_warning("%s: Minimum clock frequency too high for "
- "identification mode\n", mmc_hostname(host));
- host->ios.clock = host->f_min;
- } else
- host->ios.clock = 400000;
+ host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
mmc_set_ios(host);
int mmc_resume_bus(struct mmc_host *host)
{
+ unsigned long flags;
+
if (!mmc_bus_needs_resume(host))
return -EINVAL;
printk("%s: Starting deferred resume\n", mmc_hostname(host));
+ spin_lock_irqsave(&host->lock, flags);
host->bus_resume_flags &= ~MMC_BUSRESUME_NEEDS_RESUME;
+ host->rescan_disable = 0;
+ spin_unlock_irqrestore(&host->lock, flags);
+
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
mmc_power_up(host);
EXPORT_SYMBOL(mmc_detect_change);
+void mmc_init_erase(struct mmc_card *card)
+{
+ unsigned int sz;
+
+ if (is_power_of_2(card->erase_size))
+ card->erase_shift = ffs(card->erase_size) - 1;
+ else
+ card->erase_shift = 0;
+
+ /*
+ * It is possible to erase an arbitrarily large area of an SD or MMC
+ * card. That is not desirable because it can take a long time
+ * (minutes) potentially delaying more important I/O, and also the
+ * timeout calculations become increasingly hugely over-estimated.
+ * Consequently, 'pref_erase' is defined as a guide to limit erases
+ * to that size and alignment.
+ *
+ * For SD cards that define Allocation Unit size, limit erases to one
+ * Allocation Unit at a time. For MMC cards that define High Capacity
+ * Erase Size, whether it is switched on or not, limit to that size.
+ * Otherwise just have a stab at a good value. For modern cards it
+ * will end up being 4MiB. Note that if the value is too small, it
+ * can end up taking longer to erase.
+ */
+ if (mmc_card_sd(card) && card->ssr.au) {
+ card->pref_erase = card->ssr.au;
+ card->erase_shift = ffs(card->ssr.au) - 1;
+ } else if (card->ext_csd.hc_erase_size) {
+ card->pref_erase = card->ext_csd.hc_erase_size;
+ } else {
+ sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
+ if (sz < 128)
+ card->pref_erase = 512 * 1024 / 512;
+ else if (sz < 512)
+ card->pref_erase = 1024 * 1024 / 512;
+ else if (sz < 1024)
+ card->pref_erase = 2 * 1024 * 1024 / 512;
+ else
+ card->pref_erase = 4 * 1024 * 1024 / 512;
+ if (card->pref_erase < card->erase_size)
+ card->pref_erase = card->erase_size;
+ else {
+ sz = card->pref_erase % card->erase_size;
+ if (sz)
+ card->pref_erase += card->erase_size - sz;
+ }
+ }
+}
+
+static void mmc_set_mmc_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd,
+ unsigned int arg, unsigned int qty)
+{
+ unsigned int erase_timeout;
+
+ if (card->ext_csd.erase_group_def & 1) {
+ /* High Capacity Erase Group Size uses HC timeouts */
+ if (arg == MMC_TRIM_ARG)
+ erase_timeout = card->ext_csd.trim_timeout;
+ else
+ erase_timeout = card->ext_csd.hc_erase_timeout;
+ } else {
+ /* CSD Erase Group Size uses write timeout */
+ unsigned int mult = (10 << card->csd.r2w_factor);
+ unsigned int timeout_clks = card->csd.tacc_clks * mult;
+ unsigned int timeout_us;
+
+ /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
+ if (card->csd.tacc_ns < 1000000)
+ timeout_us = (card->csd.tacc_ns * mult) / 1000;
+ else
+ timeout_us = (card->csd.tacc_ns / 1000) * mult;
+
+ /*
+ * ios.clock is only a target. The real clock rate might be
+ * less but not that much less, so fudge it by multiplying by 2.
+ */
+ timeout_clks <<= 1;
+ timeout_us += (timeout_clks * 1000) /
+ (card->host->ios.clock / 1000);
+ erase_timeout = timeout_us / 1000;
+
+ /*
+ * Theoretically, the calculation could underflow so round up
+ * to 1ms in that case.
+ */
+ if (!erase_timeout)
+ erase_timeout = 1;
+ }
+
+ /* Multiplier for secure operations */
+ if (arg & MMC_SECURE_ARGS) {
+ if (arg == MMC_SECURE_ERASE_ARG)
+ erase_timeout *= card->ext_csd.sec_erase_mult;
+ else
+ erase_timeout *= card->ext_csd.sec_trim_mult;
+ }
+
+ erase_timeout *= qty;
+
+ /*
+ * Ensure at least a 1 second timeout for SPI as per
+ * 'mmc_set_data_timeout()'
+ */
+ if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
+ erase_timeout = 1000;
+
+ cmd->erase_timeout = erase_timeout;
+}
+
+static void mmc_set_sd_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
+{
+ if (card->ssr.erase_timeout) {
+ /* Erase timeout specified in SD Status Register (SSR) */
+ cmd->erase_timeout = card->ssr.erase_timeout * qty +
+ card->ssr.erase_offset;
+ } else {
+ /*
+ * Erase timeout not specified in SD Status Register (SSR) so
+ * use 250ms per write block.
+ */
+ cmd->erase_timeout = 250 * qty;
+ }
+
+ /* Must not be less than 1 second */
+ if (cmd->erase_timeout < 1000)
+ cmd->erase_timeout = 1000;
+}
+
+static void mmc_set_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
+{
+ if (mmc_card_sd(card))
+ mmc_set_sd_erase_timeout(card, cmd, arg, qty);
+ else
+ mmc_set_mmc_erase_timeout(card, cmd, arg, qty);
+}
+
+static int mmc_do_erase(struct mmc_card *card, unsigned int from,
+ unsigned int to, unsigned int arg)
+{
+ struct mmc_command cmd;
+ unsigned int qty = 0;
+ int err;
+
+ /*
+ * qty is used to calculate the erase timeout which depends on how many
+ * erase groups (or allocation units in SD terminology) are affected.
+ * We count erasing part of an erase group as one erase group.
+ * For SD, the allocation units are always a power of 2. For MMC, the
+ * erase group size is almost certainly also power of 2, but it does not
+ * seem to insist on that in the JEDEC standard, so we fall back to
+ * division in that case. SD may not specify an allocation unit size,
+ * in which case the timeout is based on the number of write blocks.
+ *
+ * Note that the timeout for secure trim 2 will only be correct if the
+ * number of erase groups specified is the same as the total of all
+ * preceding secure trim 1 commands. Since the power may have been
+ * lost since the secure trim 1 commands occurred, it is generally
+ * impossible to calculate the secure trim 2 timeout correctly.
+ */
+ if (card->erase_shift)
+ qty += ((to >> card->erase_shift) -
+ (from >> card->erase_shift)) + 1;
+ else if (mmc_card_sd(card))
+ qty += to - from + 1;
+ else
+ qty += ((to / card->erase_size) -
+ (from / card->erase_size)) + 1;
+
+ if (!mmc_card_blockaddr(card)) {
+ from <<= 9;
+ to <<= 9;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ if (mmc_card_sd(card))
+ cmd.opcode = SD_ERASE_WR_BLK_START;
+ else
+ cmd.opcode = MMC_ERASE_GROUP_START;
+ cmd.arg = from;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: group start error %d, "
+ "status %#x\n", err, cmd.resp[0]);
+ err = -EINVAL;
+ goto out;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ if (mmc_card_sd(card))
+ cmd.opcode = SD_ERASE_WR_BLK_END;
+ else
+ cmd.opcode = MMC_ERASE_GROUP_END;
+ cmd.arg = to;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n",
+ err, cmd.resp[0]);
+ err = -EINVAL;
+ goto out;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_ERASE;
+ cmd.arg = arg;
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ mmc_set_erase_timeout(card, &cmd, arg, qty);
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n",
+ err, cmd.resp[0]);
+ err = -EIO;
+ goto out;
+ }
+
+ if (mmc_host_is_spi(card->host))
+ goto out;
+
+ do {
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ /* Do not retry else we can't see errors */
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err || (cmd.resp[0] & 0xFDF92000)) {
+ printk(KERN_ERR "error %d requesting status %#x\n",
+ err, cmd.resp[0]);
+ err = -EIO;
+ goto out;
+ }
+ } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
+ R1_CURRENT_STATE(cmd.resp[0]) == 7);
+out:
+ return err;
+}
+
+/**
+ * mmc_erase - erase sectors.
+ * @card: card to erase
+ * @from: first sector to erase
+ * @nr: number of sectors to erase
+ * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
+ *
+ * Caller must claim host before calling this function.
+ */
+int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+ unsigned int arg)
+{
+ unsigned int rem, to = from + nr;
+
+ if (!(card->host->caps & MMC_CAP_ERASE) ||
+ !(card->csd.cmdclass & CCC_ERASE))
+ return -EOPNOTSUPP;
+
+ if (!card->erase_size)
+ return -EOPNOTSUPP;
+
+ if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
+ return -EOPNOTSUPP;
+
+ if ((arg & MMC_SECURE_ARGS) &&
+ !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN))
+ return -EOPNOTSUPP;
+
+ if ((arg & MMC_TRIM_ARGS) &&
+ !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN))
+ return -EOPNOTSUPP;
+
+ if (arg == MMC_SECURE_ERASE_ARG) {
+ if (from % card->erase_size || nr % card->erase_size)
+ return -EINVAL;
+ }
+
+ if (arg == MMC_ERASE_ARG) {
+ rem = from % card->erase_size;
+ if (rem) {
+ rem = card->erase_size - rem;
+ from += rem;
+ if (nr > rem)
+ nr -= rem;
+ else
+ return 0;
+ }
+ rem = nr % card->erase_size;
+ if (rem)
+ nr -= rem;
+ }
+
+ if (nr == 0)
+ return 0;
+
+ to = from + nr;
+
+ if (to <= from)
+ return -EINVAL;
+
+ /* 'from' and 'to' are inclusive */
+ to -= 1;
+
+ return mmc_do_erase(card, from, to, arg);
+}
+EXPORT_SYMBOL(mmc_erase);
+
+int mmc_can_erase(struct mmc_card *card)
+{
+ if ((card->host->caps & MMC_CAP_ERASE) &&
+ (card->csd.cmdclass & CCC_ERASE) && card->erase_size)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_erase);
+
+int mmc_can_trim(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_trim);
+
+int mmc_can_secure_erase_trim(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_secure_erase_trim);
+
+int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+ unsigned int nr)
+{
+ if (!card->erase_size)
+ return 0;
+ if (from % card->erase_size || nr % card->erase_size)
+ return 0;
+ return 1;
+}
+EXPORT_SYMBOL(mmc_erase_group_aligned);
+
+#if defined(CONFIG_SDMMC_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
void mmc_rescan(struct work_struct *work)
{
struct mmc_host *host =
int err;
int extend_wakelock = 0;
+
+ mmc_bus_get(host);
+
+ /* if there is a card registered, check whether it is still present */
+ if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+ host->bus_ops->detect(host);
+
+ /* If the card was removed the bus will be marked
+ * as dead - extend the wakelock so userspace
+ * can respond */
+ if (host->bus_dead)
+ extend_wakelock = 1;
+
+ mmc_bus_put(host);
+
+
+ mmc_bus_get(host);
+
+ /* if there still is a card present, stop here */
+ if (host->bus_ops != NULL) {
+ mmc_bus_put(host);
+ goto out;
+ }
+
+ /* detect a newly inserted card */
+
+ /*
+ * Only we can add a new handler, so it's safe to
+ * release the lock here.
+ */
+ mmc_bus_put(host);
+ printk("\n%s...%d.. ===== mmc_rescan Begin....======xbw[%s]=====\n",__FILE__, __LINE__, mmc_hostname(host));
+
+ if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+ {
+ printk("\n=================\n%s..%d.. ====find no SDMMC host.====xbw[%s]=====\n", \
+ __FUNCTION__, __LINE__, mmc_hostname(host));
+
+ goto out;
+ }
+
+ mmc_claim_host(host);
+
+ mmc_power_up(host);
+
+ mmc_go_idle(host);
+
+ /*
+ In oder to improve the initialization process in rockchip IC, I modify the following code about the the initialization process of SDIO-SD-MMC.
+ So I deleted the CMD8 and add a conditional to distinguish between the two card type,i.e.SDMMC process and SDIO process.
+ For detail,please refer to "RK29XX Technical Reference Manual" and "SD-MMC-SDIO Specifications".
+ Noted by xbw@2011-04-09
+ */
+
+ //mmc_send_if_cond(host, host->ocr_avail); //deleted by xbw@2011-04-09
+
+ if( strncmp( mmc_hostname(host) ,"mmc0" , strlen("mmc0")) ){
+ /*
+ * First we search for SDIO...
+ */
+ err = mmc_send_io_op_cond(host, 0, &ocr);
+ if (!err) {
+ printk("\n%s..%d.. ===== Begin to identify card as SDIO-card===xbw[%s]===\n",__FUNCTION__, __LINE__, mmc_hostname(host));
+
+ if (mmc_attach_sdio(host, ocr))
+ {
+ printk("\n=====\n %s..%d.. ===== Initialize SDIO-card unsuccessfully!!! ===xbw[%s]===\n=====\n",\
+ __FUNCTION__, __LINE__, mmc_hostname(host));
+
+ mmc_power_off(host);
+ }
+ else
+ {
+ printk("%s..%d.. ===== Initialize SDIO successfully. ===xbw[%s]===\n",__FUNCTION__, __LINE__, mmc_hostname(host));
+ }
+ extend_wakelock = 1;
+ goto out;
+ }
+ }
+
+
+ /*
+ * ...then normal SD...
+ */
+ err = mmc_send_app_op_cond(host, 0, &ocr);
+ if (!err) {
+ printk("\n%s..%d.. ===== Begin to identify card as SD-card ===xbw[%s]===\n",__FUNCTION__, __LINE__, mmc_hostname(host));
+
+ if (mmc_attach_sd(host, ocr))
+ {
+ printk("\n=====\n%s..%d.. ===== Initialize SD-card unsuccessfully!!! ===xbw[%s]===\n====\n",\
+ __FUNCTION__, __LINE__, mmc_hostname(host));
+
+ mmc_power_off(host);
+ }
+ else
+ {
+ printk("%s..%d.. ===== Initialize SD-card successfully. ===xbw[%s]===\n",__FUNCTION__, __LINE__, mmc_hostname(host));
+ }
+ extend_wakelock = 1;
+ goto out;
+ }
+
+ /*
+ * ...and finally MMC.
+ */
+ err = mmc_send_op_cond(host, 0, &ocr);
+ if (!err) {
+ printk("\n%s..%d.. ===== Begin to identify card as MMC-card ===xbw[%s]===\n", __FUNCTION__, __LINE__, mmc_hostname(host));
+
+ if (mmc_attach_mmc(host, ocr))
+ {
+ printk("\n =====\n%s..%d.. ===== Initialize MMC-card unsuccessfully!!! ===xbw[%s]===\n======\n",\
+ __FUNCTION__, __LINE__, mmc_hostname(host));
+
+ mmc_power_off(host);
+ }
+ else
+ {
+ printk("%s...%d.. ===== Initialize MMC-card successfully. ===xbw[%s]===\n",__FUNCTION__, __LINE__, mmc_hostname(host));
+ }
+ extend_wakelock = 1;
+ goto out;
+ }
+
+ mmc_release_host(host);
+ mmc_power_off(host);
+
+out:
+
+ if (extend_wakelock)
+ wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
+ else
+ wake_unlock(&mmc_delayed_work_wake_lock);
+
+ if (host->caps & MMC_CAP_NEEDS_POLL)
+ mmc_schedule_delayed_work(&host->detect, HZ);
+}
+
+#else
+void mmc_rescan(struct work_struct *work)
+{
+ struct mmc_host *host =
+ container_of(work, struct mmc_host, detect.work);
+ u32 ocr;
+ int err;
+ unsigned long flags;
+ int extend_wakelock = 0;
+
+#if defined(CONFIG_SDMMC_RK29) && defined(CONFIG_SDMMC_RK29_OLD)
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->rescan_disable) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+#endif
+
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->rescan_disable) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+
mmc_bus_get(host);
/* if there is a card registered, check whether it is still present */
mmc_claim_host(host);
mmc_power_up(host);
+ sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->ocr_avail);
*/
err = mmc_send_io_op_cond(host, 0, &ocr);
if (!err) {
- if (mmc_attach_sdio(host, ocr))
- mmc_power_off(host);
- extend_wakelock = 1;
+ if (mmc_attach_sdio(host, ocr)) {
+ mmc_claim_host(host);
+ /* try SDMEM (but not MMC) even if SDIO is broken */
+ if (mmc_send_app_op_cond(host, 0, &ocr))
+ goto out_fail;
+
+ if (mmc_attach_sd(host, ocr))
+ mmc_power_off(host);
+ extend_wakelock = 1;
+ }
goto out;
}
goto out;
}
+out_fail:
mmc_release_host(host);
mmc_power_off(host);
if (host->caps & MMC_CAP_NEEDS_POLL)
mmc_schedule_delayed_work(&host->detect, HZ);
}
+#endif
void mmc_start_host(struct mmc_host *host)
{
if (host->caps & MMC_CAP_DISABLE)
cancel_delayed_work(&host->disable);
- cancel_delayed_work(&host->detect);
+ cancel_delayed_work_sync(&host->detect);
mmc_flush_scheduled_work();
+ /* clear pm flags now and let card drivers set them as needed */
+ host->pm_flags = 0;
+
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->remove)
/**
* mmc_suspend_host - suspend a host
* @host: mmc host
- * @state: suspend mode (PM_SUSPEND_xxx)
*/
-int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
+int mmc_suspend_host(struct mmc_host *host)
{
int err = 0;
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->suspend)
err = host->bus_ops->suspend(host);
+
+#if defined(CONFIG_SDMMC_RK29) && defined(CONFIG_SDMMC_RK29_OLD)
+ //deleted all detail code.
+#else
if (err == -ENOSYS || !host->bus_ops->resume) {
/*
* We simply "remove" the card in this case.
mmc_claim_host(host);
mmc_detach_bus(host);
mmc_release_host(host);
+ host->pm_flags = 0;
err = 0;
}
+#endif
}
mmc_bus_put(host);
- if (!err)
+ if (!err && !(host->pm_flags & MMC_PM_KEEP_POWER))
mmc_power_off(host);
return err;
int err = 0;
mmc_bus_get(host);
- if (host->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME) {
+ if (mmc_bus_manual_resume(host)) {
host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
mmc_bus_put(host);
return 0;
}
if (host->bus_ops && !host->bus_dead) {
- mmc_power_up(host);
- mmc_select_voltage(host, host->ocr);
+ if (!(host->pm_flags & MMC_PM_KEEP_POWER)) {
+ mmc_power_up(host);
+ mmc_select_voltage(host, host->ocr);
+ }
BUG_ON(!host->bus_ops->resume);
+
+#if defined(CONFIG_SDMMC_RK29) && defined(CONFIG_SDMMC_RK29_OLD)
err = host->bus_ops->resume(host);
if (err) {
printk(KERN_WARNING "%s: error %d during resume "
"(card was removed?)\n",
mmc_hostname(host), err);
- if (host->bus_ops->remove)
- host->bus_ops->remove(host);
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_release_host(host);
- /* no need to bother upper layers */
err = 0;
}
+
+#elif defined(CONFIG_SDMMC_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+ //panic if the card is being removed during the resume, deleted by xbw at 2011-06-20
+ host->bus_ops->resume(host);
+
+#else
+ err = host->bus_ops->resume(host);
+ if (err) {
+ printk(KERN_WARNING "%s: error %d during resume "
+ "(card was removed?)\n",
+ mmc_hostname(host), err);
+ err = 0;
+ }
+#endif
}
mmc_bus_put(host);
- /*
- * We add a slight delay here so that resume can progress
- * in parallel.
- */
- mmc_detect_change(host, 1);
-
return err;
}
-
EXPORT_SYMBOL(mmc_resume_host);
+/* Do the card removal on suspend if card is assumed removeable
+ * Do that in pm notifier while userspace isn't yet frozen, so we will be able
+ to sync the card.
+*/
+int mmc_pm_notify(struct notifier_block *notify_block,
+ unsigned long mode, void *unused)
+{
+ struct mmc_host *host = container_of(
+ notify_block, struct mmc_host, pm_notify);
+ unsigned long flags;
+
+
+ switch (mode) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (mmc_bus_needs_resume(host)) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ break;
+ }
+ host->rescan_disable = 1;
+ spin_unlock_irqrestore(&host->lock, flags);
+ cancel_delayed_work_sync(&host->detect);
+
+ if (!host->bus_ops || host->bus_ops->suspend)
+ break;
+
+ mmc_claim_host(host);
+
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+ host->pm_flags = 0;
+ break;
+
+ case PM_POST_SUSPEND:
+ case PM_POST_HIBERNATION:
+ case PM_POST_RESTORE:
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (mmc_bus_manual_resume(host)) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ break;
+ }
+ host->rescan_disable = 0;
+ spin_unlock_irqrestore(&host->lock, flags);
+ mmc_detect_change(host, 0);
+
+ }
+
+ return 0;
+}
#endif
#ifdef CONFIG_MMC_EMBEDDED_SDIO
projects / firefly-linux-kernel-4.4.55.git / blobdiff