break;
default:
- BUG();
+ dev_err(host->dev, "unsupported chip-select %d\n", chipnr);
}
}
host->data_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->data_va))
return PTR_ERR(host->data_va);
-
+
host->data_pa = (dma_addr_t)res->start;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
mtd->priv = nand;
nand->priv = host;
- host->mtd.owner = THIS_MODULE;
+ host->mtd.dev.parent = &pdev->dev;
nand->IO_ADDR_R = host->data_va;
nand->IO_ADDR_W = host->data_va;
nand->cmd_ctrl = fsmc_cmd_ctrl;
nand->chip_delay = 30;
+ /*
+ * Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
+ * can overwrite this value if the DT provides a different value.
+ */
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->options = pdata->options;
nand->select_chip = fsmc_select_chip;
nand->badblockbits = 7;
+ nand->flash_node = np;
if (pdata->width == FSMC_NAND_BW16)
nand->options |= NAND_BUSWIDTH_16;
nand->ecc.correct = fsmc_bch8_correct_data;
nand->ecc.bytes = 13;
nand->ecc.strength = 8;
- } else {
- nand->ecc.calculate = fsmc_read_hwecc_ecc1;
- nand->ecc.correct = nand_correct_data;
- nand->ecc.bytes = 3;
- nand->ecc.strength = 1;
}
/*
default:
dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
- BUG();
+ ret = -EINVAL;
+ goto err_probe;
}
} else {
- switch (host->mtd.oobsize) {
- case 16:
- nand->ecc.layout = &fsmc_ecc1_16_layout;
- break;
- case 64:
- nand->ecc.layout = &fsmc_ecc1_64_layout;
+ switch (nand->ecc.mode) {
+ case NAND_ECC_HW:
+ dev_info(&pdev->dev, "Using 1-bit HW ECC scheme\n");
+ nand->ecc.calculate = fsmc_read_hwecc_ecc1;
+ nand->ecc.correct = nand_correct_data;
+ nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
break;
- case 128:
- nand->ecc.layout = &fsmc_ecc1_128_layout;
+
+ case NAND_ECC_SOFT_BCH:
+ dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
break;
+
default:
- dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
- mtd->oobsize);
- BUG();
+ dev_err(&pdev->dev, "Unsupported ECC mode!\n");
+ goto err_probe;
+ }
+
+ /*
+ * Don't set layout for BCH4 SW ECC. This will be
+ * generated later in nand_bch_init() later.
+ */
+ if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
+ switch (host->mtd.oobsize) {
+ case 16:
+ nand->ecc.layout = &fsmc_ecc1_16_layout;
+ break;
+ case 64:
+ nand->ecc.layout = &fsmc_ecc1_64_layout;
+ break;
+ case 128:
+ nand->ecc.layout = &fsmc_ecc1_128_layout;
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
+ ret = -EINVAL;
+ goto err_probe;
+ }
}
}