static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
if (mac->type == e1000_pch_lpt) {
mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
mac->ops.rar_set = e1000_rar_set_pch_lpt;
+ mac->ops.setup_physical_interface =
+ e1000_setup_copper_link_pch_lpt;
}
/* Enable PCS Lock-loss workaround for ICH8 */
*
* Assumes the SW/FW/HW Semaphore is already acquired.
**/
-static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
{
return __e1000_access_emi_reg_locked(hw, addr, &data, false);
}
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
s32 ret_val;
- u16 lpi_ctrl;
+ u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data;
- if ((hw->phy.type != e1000_phy_82579) &&
- (hw->phy.type != e1000_phy_i217))
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ lpa = I82579_EEE_LP_ABILITY;
+ pcs_status = I82579_EEE_PCS_STATUS;
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ break;
+ case e1000_phy_i217:
+ lpa = I217_EEE_LP_ABILITY;
+ pcs_status = I217_EEE_PCS_STATUS;
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ break;
+ default:
return 0;
+ }
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
/* Enable EEE if not disabled by user */
if (!dev_spec->eee_disable) {
- u16 lpa, pcs_status, data;
-
/* Save off link partner's EEE ability */
- switch (hw->phy.type) {
- case e1000_phy_82579:
- lpa = I82579_EEE_LP_ABILITY;
- pcs_status = I82579_EEE_PCS_STATUS;
- break;
- case e1000_phy_i217:
- lpa = I217_EEE_LP_ABILITY;
- pcs_status = I217_EEE_PCS_STATUS;
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- goto release;
- }
ret_val = e1000_read_emi_reg_locked(hw, lpa,
&dev_spec->eee_lp_ability);
if (ret_val)
goto release;
+ /* Read EEE advertisement */
+ ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv);
+ if (ret_val)
+ goto release;
+
/* Enable EEE only for speeds in which the link partner is
- * EEE capable.
+ * EEE capable and for which we advertise EEE.
*/
- if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
+ if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
- if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
+ if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
e1e_rphy_locked(hw, MII_LPA, &data);
if (data & LPA_100FULL)
lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
dev_spec->eee_lp_ability &=
~I82579_EEE_100_SUPPORTED;
}
-
- /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
- ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
- if (ret_val)
- goto release;
}
+ /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
+ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
+ if (ret_val)
+ goto release;
+
ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl);
release:
hw->phy.ops.release(hw);
return ret_val;
}
+/**
+ * e1000_platform_pm_pch_lpt - Set platform power management values
+ * @hw: pointer to the HW structure
+ * @link: bool indicating link status
+ *
+ * Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like"
+ * GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed
+ * when link is up (which must not exceed the maximum latency supported
+ * by the platform), otherwise specify there is no LTR requirement.
+ * Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop
+ * latencies in the LTR Extended Capability Structure in the PCIe Extended
+ * Capability register set, on this device LTR is set by writing the
+ * equivalent snoop/no-snoop latencies in the LTRV register in the MAC and
+ * set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB)
+ * message to the PMC.
+ **/
+static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
+{
+ u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) |
+ link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND;
+ u16 lat_enc = 0; /* latency encoded */
+
+ if (link) {
+ u16 speed, duplex, scale = 0;
+ u16 max_snoop, max_nosnoop;
+ u16 max_ltr_enc; /* max LTR latency encoded */
+ s64 lat_ns; /* latency (ns) */
+ s64 value;
+ u32 rxa;
+
+ if (!hw->adapter->max_frame_size) {
+ e_dbg("max_frame_size not set.\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
+ if (!speed) {
+ e_dbg("Speed not set.\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Rx Packet Buffer Allocation size (KB) */
+ rxa = er32(PBA) & E1000_PBA_RXA_MASK;
+
+ /* Determine the maximum latency tolerated by the device.
+ *
+ * Per the PCIe spec, the tolerated latencies are encoded as
+ * a 3-bit encoded scale (only 0-5 are valid) multiplied by
+ * a 10-bit value (0-1023) to provide a range from 1 ns to
+ * 2^25*(2^10-1) ns. The scale is encoded as 0=2^0ns,
+ * 1=2^5ns, 2=2^10ns,...5=2^25ns.
+ */
+ lat_ns = ((s64)rxa * 1024 -
+ (2 * (s64)hw->adapter->max_frame_size)) * 8 * 1000;
+ if (lat_ns < 0)
+ lat_ns = 0;
+ else
+ do_div(lat_ns, speed);
+
+ value = lat_ns;
+ while (value > PCI_LTR_VALUE_MASK) {
+ scale++;
+ value = DIV_ROUND_UP(value, (1 << 5));
+ }
+ if (scale > E1000_LTRV_SCALE_MAX) {
+ e_dbg("Invalid LTR latency scale %d\n", scale);
+ return -E1000_ERR_CONFIG;
+ }
+ lat_enc = (u16)((scale << PCI_LTR_SCALE_SHIFT) | value);
+
+ /* Determine the maximum latency tolerated by the platform */
+ pci_read_config_word(hw->adapter->pdev, E1000_PCI_LTR_CAP_LPT,
+ &max_snoop);
+ pci_read_config_word(hw->adapter->pdev,
+ E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop);
+ max_ltr_enc = max_t(u16, max_snoop, max_nosnoop);
+
+ if (lat_enc > max_ltr_enc)
+ lat_enc = max_ltr_enc;
+ }
+
+ /* Set Snoop and No-Snoop latencies the same */
+ reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT);
+ ew32(LTRV, reg);
+
+ return 0;
+}
+
/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
return ret_val;
}
+ /* When connected at 10Mbps half-duplex, 82579 parts are excessively
+ * aggressive resulting in many collisions. To avoid this, increase
+ * the IPG and reduce Rx latency in the PHY.
+ */
+ if ((hw->mac.type == e1000_pch2lan) && link) {
+ u32 reg;
+ reg = er32(STATUS);
+ if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) {
+ reg = er32(TIPG);
+ reg &= ~E1000_TIPG_IPGT_MASK;
+ reg |= 0xFF;
+ ew32(TIPG, reg);
+
+ /* Reduce Rx latency in analog PHY */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0);
+
+ hw->phy.ops.release(hw);
+
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
/* Work-around I218 hang issue */
if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
(hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
return ret_val;
}
+ if (hw->mac.type == e1000_pch_lpt) {
+ /* Set platform power management values for
+ * Latency Tolerance Reporting (LTR)
+ */
+ ret_val = e1000_platform_pm_pch_lpt(hw, link);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Clear link partner's EEE ability */
hw->dev_spec.ich8lan.eee_lp_ability = 0;
(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
- /* Disable EEE by default until IEEE802.3az spec is finalized */
- if (adapter->flags2 & FLAG2_HAS_EEE)
- adapter->hw.dev_spec.ich8lan.eee_disable = true;
-
return 0;
}
break;
case e1000_phy_82577:
case e1000_phy_82579:
- case e1000_phy_i217:
ret_val = e1000_copper_link_setup_82577(hw);
if (ret_val)
return ret_val;
return e1000e_setup_copper_link(hw);
}
+/**
+ * e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY specific link setup function and then calls the
+ * generic setup_copper_link to finish configuring the link for
+ * Lynxpoint PCH devices
+ **/
+static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+
+ ret_val = e1000_copper_link_setup_82577(hw);
+ if (ret_val)
+ return ret_val;
+
+ return e1000e_setup_copper_link(hw);
+}
+
/**
* e1000_get_link_up_info_ich8lan - Get current link speed and duplex
* @hw: pointer to the HW structure