* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
- */
+ **/
static void igb_put_hw_semaphore_i210(struct e1000_hw *hw)
{
u32 swsm;
if (!(swfw_sync & fwmask))
break;
- /*
- * Firmware currently using resource (fwmask)
- */
+ /* Firmware currently using resource (fwmask) */
igb_put_hw_semaphore_i210(hw);
mdelay(5);
i++;
/* We cannot hold synchronization semaphores for too long,
* because of forceful takeover procedure. However it is more efficient
- * to read in bursts than synchronizing access for each word. */
+ * to read in bursts than synchronizing access for each word.
+ */
for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
E1000_EERD_EEWR_MAX_COUNT : (words - i);
u32 attempts = 100000;
s32 ret_val = E1000_SUCCESS;
- /*
- * A check for invalid values: offset too large, too many words,
+ /* A check for invalid values: offset too large, too many words,
* too many words for the offset, and not enough words.
*/
if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
*
* If error code is returned, data and Shadow RAM may be inconsistent - buffer
* partially written.
- */
+ **/
s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
u16 *data)
{
/**
* igb_read_nvm_i211 - Read NVM wrapper function for I211
* @hw: pointer to the HW structure
- * @address: the word address (aka eeprom offset) to read
+ * @words: number of words to read
* @data: pointer to the data read
*
* Wrapper function to return data formerly found in the NVM.
if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
- /*
- * Replace the read function with semaphore grabbing with
+ /* Replace the read function with semaphore grabbing with
* the one that skips this for a while.
* We have semaphore taken already here.
*/
return status;
}
-
/**
* igb_update_nvm_checksum_i210 - Update EEPROM checksum
* @hw: pointer to the HW structure
u16 checksum = 0;
u16 i, nvm_data;
- /*
- * Read the first word from the EEPROM. If this times out or fails, do
+ /* Read the first word from the EEPROM. If this times out or fails, do
* not continue or we could be in for a very long wait while every
* EEPROM read fails
*/
}
if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
- /*
- * Do not use hw->nvm.ops.write, hw->nvm.ops.read
+ /* Do not use hw->nvm.ops.write, hw->nvm.ops.read
* because we do not want to take the synchronization
* semaphores twice here.
*/
* igb_pool_flash_update_done_i210 - Pool FLUDONE status.
* @hw: pointer to the HW structure
*
- */
+ **/
static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
{
s32 ret_val = -E1000_ERR_NVM;
out:
return ret_val;
}
+
+/**
+ * __igb_access_xmdio_reg - Read/write XMDIO register
+ * @hw: pointer to the HW structure
+ * @address: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: pointer to value to read/write from/to the XMDIO address
+ * @read: boolean flag to indicate read or write
+ **/
+static s32 __igb_access_xmdio_reg(struct e1000_hw *hw, u16 address,
+ u8 dev_addr, u16 *data, bool read)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
+ dev_addr);
+ if (ret_val)
+ return ret_val;
+
+ if (read)
+ ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
+ else
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
+ if (ret_val)
+ return ret_val;
+
+ /* Recalibrate the device back to 0 */
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
+ if (ret_val)
+ return ret_val;
+
+ return ret_val;
+}
+
+/**
+ * igb_read_xmdio_reg - Read XMDIO register
+ * @hw: pointer to the HW structure
+ * @addr: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: value to be read from the EMI address
+ **/
+s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
+{
+ return __igb_access_xmdio_reg(hw, addr, dev_addr, data, true);
+}
+
+/**
+ * igb_write_xmdio_reg - Write XMDIO register
+ * @hw: pointer to the HW structure
+ * @addr: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: value to be written to the XMDIO address
+ **/
+s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
+{
+ return __igb_access_xmdio_reg(hw, addr, dev_addr, &data, false);
+}