#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/highmem.h>
+#include <linux/mdio.h>
#include "igb.h"
ecmd->port = PORT_TP;
ecmd->phy_address = hw->phy.addr;
+ ecmd->transceiver = XCVR_INTERNAL;
} else {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE |
- SUPPORTED_Autoneg);
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause);
+ if (hw->mac.type == e1000_i354)
+ ecmd->supported |= SUPPORTED_2500baseX_Full;
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg |
- ADVERTISED_Pause);
+ ecmd->advertising = ADVERTISED_FIBRE;
+
+ switch (adapter->link_speed) {
+ case SPEED_2500:
+ ecmd->advertising = ADVERTISED_2500baseX_Full;
+ break;
+ case SPEED_1000:
+ ecmd->advertising = ADVERTISED_1000baseT_Full;
+ break;
+ case SPEED_100:
+ ecmd->advertising = ADVERTISED_100baseT_Full;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->mac.autoneg == 1)
+ ecmd->advertising |= ADVERTISED_Autoneg;
ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
}
- ecmd->transceiver = XCVR_INTERNAL;
-
status = rd32(E1000_STATUS);
if (status & E1000_STATUS_LU) {
-
- if ((status & E1000_STATUS_SPEED_1000) ||
- hw->phy.media_type != e1000_media_type_copper)
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ if ((hw->mac.type == e1000_i354) &&
+ (status & E1000_STATUS_2P5_SKU) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER))
+ ecmd->speed = SPEED_2500;
+ else if (status & E1000_STATUS_SPEED_1000)
+ ecmd->speed = SPEED_1000;
else if (status & E1000_STATUS_SPEED_100)
- ethtool_cmd_speed_set(ecmd, SPEED_100);
+ ecmd->speed = SPEED_100;
else
- ethtool_cmd_speed_set(ecmd, SPEED_10);
-
+ ecmd->speed = SPEED_10;
if ((status & E1000_STATUS_FD) ||
hw->phy.media_type != e1000_media_type_copper)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
} else {
- ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->speed = -1;
ecmd->duplex = -1;
}
- ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ if ((hw->phy.media_type == e1000_media_type_fiber) ||
+ hw->mac.autoneg)
+ ecmd->autoneg = AUTONEG_ENABLE;
+ else
+ ecmd->autoneg = AUTONEG_DISABLE;
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if (hw->phy.media_type == e1000_media_type_copper)
struct e1000_hw *hw = &adapter->hw;
/* When SoL/IDER sessions are active, autoneg/speed/duplex
- * cannot be changed */
+ * cannot be changed
+ */
if (igb_check_reset_block(hw)) {
dev_err(&adapter->pdev->dev,
"Cannot change link characteristics when SoL/IDER is active.\n");
return -EINVAL;
}
- /*
- * MDI setting is only allowed when autoneg enabled because
+ /* MDI setting is only allowed when autoneg enabled because
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
- hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ switch (adapter->link_speed) {
+ case SPEED_2500:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_2500baseX_Full;
+ break;
+ case SPEED_1000:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_1000baseT_Full;
+ break;
+ case SPEED_100:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_100baseT_Full;
+ break;
+ default:
+ break;
+ }
+ } else {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ }
ecmd->advertising = hw->phy.autoneg_advertised;
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
/* MDI-X => 2; MDI => 1; Auto => 3 */
if (ecmd->eth_tp_mdix_ctrl) {
- /*
- * fix up the value for auto (3 => 0) as zero is mapped
+ /* fix up the value for auto (3 => 0) as zero is mapped
* internally to auto
*/
if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_mac_info *mac = &adapter->hw.mac;
- /*
- * If the link is not reported up to netdev, interrupts are disabled,
+ /* If the link is not reported up to netdev, interrupts are disabled,
* and so the physical link state may have changed since we last
* looked. Set get_link_status to make sure that the true link
* state is interrogated, rather than pulling a cached and possibly
/* Interrupt */
/* Reading EICS for EICR because they read the
- * same but EICS does not clear on read */
+ * same but EICS does not clear on read
+ */
regs_buff[13] = rd32(E1000_EICS);
regs_buff[14] = rd32(E1000_EICS);
regs_buff[15] = rd32(E1000_EIMS);
regs_buff[17] = rd32(E1000_EIAC);
regs_buff[18] = rd32(E1000_EIAM);
/* Reading ICS for ICR because they read the
- * same but ICS does not clear on read */
+ * same but ICS does not clear on read
+ */
regs_buff[19] = rd32(E1000_ICS);
regs_buff[20] = rd32(E1000_ICS);
regs_buff[21] = rd32(E1000_IMS);
if (hw->nvm.type == e1000_nvm_eeprom_spi)
ret_val = hw->nvm.ops.read(hw, first_word,
- last_word - first_word + 1,
- eeprom_buff);
+ last_word - first_word + 1,
+ eeprom_buff);
else {
for (i = 0; i < last_word - first_word + 1; i++) {
ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
- &eeprom_buff[i]);
+ &eeprom_buff[i]);
if (ret_val)
break;
}
ptr = (void *)eeprom_buff;
if (eeprom->offset & 1) {
- /* need read/modify/write of first changed EEPROM word */
- /* only the second byte of the word is being modified */
+ /* need read/modify/write of first changed EEPROM word
+ * only the second byte of the word is being modified
+ */
ret_val = hw->nvm.ops.read(hw, first_word, 1,
&eeprom_buff[0]);
ptr++;
}
if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
- /* need read/modify/write of last changed EEPROM word */
- /* only the first byte of the word is being modified */
+ /* need read/modify/write of last changed EEPROM word
+ * only the first byte of the word is being modified
+ */
ret_val = hw->nvm.ops.read(hw, last_word, 1,
&eeprom_buff[last_word - first_word]);
}
eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
ret_val = hw->nvm.ops.write(hw, first_word,
- last_word - first_word + 1, eeprom_buff);
+ last_word - first_word + 1, eeprom_buff);
/* Update the checksum over the first part of the EEPROM if needed
- * and flush shadow RAM for 82573 controllers */
+ * and flush shadow RAM for 82573 controllers
+ */
if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG)))
hw->nvm.ops.update(hw);
strlcpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version));
- /*
- * EEPROM image version # is reported as firmware version # for
+ /* EEPROM image version # is reported as firmware version # for
* 82575 controllers
*/
strlcpy(drvinfo->fw_version, adapter->fw_version,
}
if (adapter->num_tx_queues > adapter->num_rx_queues)
- temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring));
+ temp_ring = vmalloc(adapter->num_tx_queues *
+ sizeof(struct igb_ring));
else
- temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring));
+ temp_ring = vmalloc(adapter->num_rx_queues *
+ sizeof(struct igb_ring));
if (!temp_ring) {
err = -ENOMEM;
igb_down(adapter);
- /*
- * We can't just free everything and then setup again,
+ /* We can't just free everything and then setup again,
* because the ISRs in MSI-X mode get passed pointers
- * to the tx and rx ring structs.
+ * to the Tx and Rx ring structs.
*/
if (new_tx_count != adapter->tx_ring_count) {
for (i = 0; i < adapter->num_tx_queues; i++) {
switch (adapter->hw.mac.type) {
case e1000_i350:
+ case e1000_i354:
test = reg_test_i350;
toggle = 0x7FEFF3FF;
break;
ics_mask = 0x77DCFED5;
break;
case e1000_i350:
+ case e1000_i354:
case e1000_i210:
case e1000_i211:
ics_mask = 0x77DCFED5;
}
static int igb_clean_test_rings(struct igb_ring *rx_ring,
- struct igb_ring *tx_ring,
- unsigned int size)
+ struct igb_ring *tx_ring,
+ unsigned int size)
{
union e1000_adv_rx_desc *rx_desc;
struct igb_rx_buffer *rx_buffer_info;
rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) {
- /* check rx buffer */
+ /* check Rx buffer */
rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
/* sync Rx buffer for CPU read */
IGB_RX_BUFSZ,
DMA_FROM_DEVICE);
- /* unmap buffer on tx side */
+ /* unmap buffer on Tx side */
tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
- /* increment rx/tx next to clean counters */
+ /* increment Rx/Tx next to clean counters */
rx_ntc++;
if (rx_ntc == rx_ring->count)
rx_ntc = 0;
igb_create_lbtest_frame(skb, size);
skb_put(skb, size);
- /*
- * Calculate the loop count based on the largest descriptor ring
+ /* Calculate the loop count based on the largest descriptor ring
* The idea is to wrap the largest ring a number of times using 64
* send/receive pairs during each loop
*/
break;
}
- /* allow 200 milliseconds for packets to go from tx to rx */
+ /* allow 200 milliseconds for packets to go from Tx to Rx */
msleep(200);
good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
{
/* PHY loopback cannot be performed if SoL/IDER
- * sessions are active */
+ * sessions are active
+ */
if (igb_check_reset_block(&adapter->hw)) {
dev_err(&adapter->pdev->dev,
"Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
}
+
+ if (adapter->hw.mac.type == e1000_i354) {
+ dev_info(&adapter->pdev->dev,
+ "Loopback test not supported on i354.\n");
+ *data = 0;
+ goto out;
+ }
*data = igb_setup_desc_rings(adapter);
if (*data)
goto out;
hw->mac.serdes_has_link = false;
/* On some blade server designs, link establishment
- * could take as long as 2-3 minutes */
+ * could take as long as 2-3 minutes
+ */
do {
hw->mac.ops.check_for_link(&adapter->hw);
if (hw->mac.serdes_has_link)
igb_power_up_link(adapter);
/* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
+ * interfere with test result
+ */
if (igb_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
struct igb_adapter *adapter = netdev_priv(netdev);
wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC |
- WAKE_PHY;
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY;
wol->wolopts = 0;
if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED))
sprintf(p, "rx_queue_%u_alloc_failed", i);
p += ETH_GSTRING_LEN;
}
-/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
+ /* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
break;
}
}
case e1000_82576:
case e1000_82580:
case e1000_i350:
+ case e1000_i354:
case e1000_i210:
case e1000_i211:
info->so_timestamping =
}
static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
- u32 *rule_locs)
+ u32 *rule_locs)
{
struct igb_adapter *adapter = netdev_priv(dev);
int ret = -EOPNOTSUPP;
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u32 ipcnfg, eeer;
+ u32 ipcnfg, eeer, ret_val;
+ u16 phy_data;
if ((hw->mac.type < e1000_i350) ||
(hw->phy.media_type != e1000_media_type_copper))
if (ipcnfg & E1000_IPCNFG_EEE_100M_AN)
edata->advertised |= ADVERTISED_100baseT_Full;
+ /* EEE Link Partner Advertised */
+ switch (hw->mac.type) {
+ case e1000_i350:
+ ret_val = igb_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350,
+ &phy_data);
+ if (ret_val)
+ return -ENODATA;
+
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210,
+ E1000_EEE_LP_ADV_DEV_I210,
+ &phy_data);
+ if (ret_val)
+ return -ENODATA;
+
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ break;
+ default:
+ break;
+ }
+
if (eeer & E1000_EEER_EEE_NEG)
edata->eee_active = true;
return 0;
}
+static int igb_get_module_info(struct net_device *netdev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = E1000_SUCCESS;
+ u16 sff8472_rev, addr_mode;
+ bool page_swap = false;
+
+ if ((hw->phy.media_type == e1000_media_type_copper) ||
+ (hw->phy.media_type == e1000_media_type_unknown))
+ return -EOPNOTSUPP;
+
+ /* Check whether we support SFF-8472 or not */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev);
+ if (status != E1000_SUCCESS)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode);
+ if (status != E1000_SUCCESS)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) {
+ hw_dbg("Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
+ page_swap = true;
+ }
+
+ if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) {
+ /* We have an SFP, but it does not support SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ } else {
+ /* We have an SFP which supports a revision of SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ }
+
+ return 0;
+}
+
+static int igb_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = E1000_SUCCESS;
+ u16 *dataword;
+ u16 first_word, last_word;
+ int i = 0;
+
+ if (ee->len == 0)
+ return -EINVAL;
+
+ first_word = ee->offset >> 1;
+ last_word = (ee->offset + ee->len - 1) >> 1;
+
+ dataword = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+ GFP_KERNEL);
+ if (!dataword)
+ return -ENOMEM;
+
+ /* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
+ if (status != E1000_SUCCESS)
+ /* Error occurred while reading module */
+ return -EIO;
+
+ be16_to_cpus(&dataword[i]);
+ }
+
+ memcpy(data, (u8 *)dataword + (ee->offset & 1), ee->len);
+ kfree(dataword);
+
+ return 0;
+}
+
static int igb_ethtool_begin(struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
}
static const struct ethtool_ops igb_ethtool_ops = {
- .get_settings = igb_get_settings,
- .set_settings = igb_set_settings,
- .get_drvinfo = igb_get_drvinfo,
- .get_regs_len = igb_get_regs_len,
- .get_regs = igb_get_regs,
- .get_wol = igb_get_wol,
- .set_wol = igb_set_wol,
- .get_msglevel = igb_get_msglevel,
- .set_msglevel = igb_set_msglevel,
- .nway_reset = igb_nway_reset,
- .get_link = igb_get_link,
- .get_eeprom_len = igb_get_eeprom_len,
- .get_eeprom = igb_get_eeprom,
- .set_eeprom = igb_set_eeprom,
- .get_ringparam = igb_get_ringparam,
- .set_ringparam = igb_set_ringparam,
- .get_pauseparam = igb_get_pauseparam,
- .set_pauseparam = igb_set_pauseparam,
- .self_test = igb_diag_test,
- .get_strings = igb_get_strings,
- .set_phys_id = igb_set_phys_id,
- .get_sset_count = igb_get_sset_count,
- .get_ethtool_stats = igb_get_ethtool_stats,
- .get_coalesce = igb_get_coalesce,
- .set_coalesce = igb_set_coalesce,
- .get_ts_info = igb_get_ts_info,
+ .get_settings = igb_get_settings,
+ .set_settings = igb_set_settings,
+ .get_drvinfo = igb_get_drvinfo,
+ .get_regs_len = igb_get_regs_len,
+ .get_regs = igb_get_regs,
+ .get_wol = igb_get_wol,
+ .set_wol = igb_set_wol,
+ .get_msglevel = igb_get_msglevel,
+ .set_msglevel = igb_set_msglevel,
+ .nway_reset = igb_nway_reset,
+ .get_link = igb_get_link,
+ .get_eeprom_len = igb_get_eeprom_len,
+ .get_eeprom = igb_get_eeprom,
+ .set_eeprom = igb_set_eeprom,
+ .get_ringparam = igb_get_ringparam,
+ .set_ringparam = igb_set_ringparam,
+ .get_pauseparam = igb_get_pauseparam,
+ .set_pauseparam = igb_set_pauseparam,
+ .self_test = igb_diag_test,
+ .get_strings = igb_get_strings,
+ .set_phys_id = igb_set_phys_id,
+ .get_sset_count = igb_get_sset_count,
+ .get_ethtool_stats = igb_get_ethtool_stats,
+ .get_coalesce = igb_get_coalesce,
+ .set_coalesce = igb_set_coalesce,
+ .get_ts_info = igb_get_ts_info,
.get_rxnfc = igb_get_rxnfc,
.set_rxnfc = igb_set_rxnfc,
.get_eee = igb_get_eee,
.set_eee = igb_set_eee,
+ .get_module_info = igb_get_module_info,
+ .get_module_eeprom = igb_get_module_eeprom,
.begin = igb_ethtool_begin,
.complete = igb_ethtool_complete,
};
projects / firefly-linux-kernel-4.4.55.git / blobdiff