struct ixgbe_hw *hw = &adapter->hw;
ixgbe_link_speed supported_link;
u32 link_speed = 0;
- bool autoneg;
+ bool autoneg = false;
bool link_up;
hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg);
return err;
/* this sets the link speed and restarts auto-neg */
hw->mac.autotry_restart = true;
- err = hw->mac.ops.setup_link(hw, advertised, true, true);
+ err = hw->mac.ops.setup_link(hw, advertised, true);
if (err) {
e_info(probe, "setup link failed with code %d\n", err);
- hw->mac.ops.setup_link(hw, old, true, true);
+ hw->mac.ops.setup_link(hw, old, true);
}
} else {
/* in this case we currently only support 10Gb/FULL */
p = (char *) adapter +
ixgbe_gstrings_stats[i].stat_offset;
break;
+ default:
+ data[i] = 0;
+ continue;
}
data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
switch (stringset) {
case ETH_SS_TEST:
- memcpy(data, *ixgbe_gstrings_test,
- IXGBE_TEST_LEN * ETH_GSTRING_LEN);
+ for (i = 0; i < IXGBE_TEST_LEN; i++) {
+ memcpy(data, ixgbe_gstrings_test[i], ETH_GSTRING_LEN);
+ data += ETH_GSTRING_LEN;
+ }
break;
case ETH_SS_STATS:
for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
struct ethtool_test *eth_test, u64 *data)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
bool if_running = netif_running(netdev);
set_bit(__IXGBE_TESTING, &adapter->state);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- /* Offline tests */
-
- e_info(hw, "offline testing starting\n");
-
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
- if (ixgbe_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
int i;
for (i = 0; i < adapter->num_vfs; i++) {
}
}
+ /* Offline tests */
+ e_info(hw, "offline testing starting\n");
+
if (if_running)
/* indicate we're in test mode */
dev_close(netdev);
- else
- ixgbe_reset(adapter);
+ /* bringing adapter down disables SFP+ optics */
+ if (hw->mac.ops.enable_tx_laser)
+ hw->mac.ops.enable_tx_laser(hw);
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
+ if (ixgbe_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ ixgbe_reset(adapter);
e_info(hw, "register testing starting\n");
if (ixgbe_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
skip_loopback:
ixgbe_reset(adapter);
+ /* clear testing bit and return adapter to previous state */
clear_bit(__IXGBE_TESTING, &adapter->state);
if (if_running)
dev_open(netdev);
} else {
e_info(hw, "online testing starting\n");
+
+ /* if adapter is down, SFP+ optics will be disabled */
+ if (!if_running && hw->mac.ops.enable_tx_laser)
+ hw->mac.ops.enable_tx_laser(hw);
+
/* Online tests */
if (ixgbe_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
- /* Online tests aren't run; pass by default */
+ /* Offline tests aren't run; pass by default */
data[0] = 0;
data[1] = 0;
data[2] = 0;
clear_bit(__IXGBE_TESTING, &adapter->state);
}
+
+ /* if adapter was down, ensure SFP+ optics are disabled again */
+ if (!if_running && hw->mac.ops.disable_tx_laser)
+ hw->mac.ops.disable_tx_laser(hw);
skip_ol_tests:
msleep_interruptible(4 * 1000);
}
(1 << HWTSTAMP_FILTER_NONE) |
(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
break;
default: